Blue‐shifted and red‐shifted hydrogen bonds: Theoretical study of the CH3CHO· · ·HNO complexes

The blue‐shifted and red‐shifted H‐bonds have been studied in complexes CH₃CHO…HNO. At the MP2/6‐31G(d), MP2/6‐31+G(d,p) MP2/6‐311++G(d,p), B3LYP/6‐31G(d), B3LYP/6‐31+G(d,p) and B3LYP/6‐311++G(d,p) levels, the geometric structures and vibrational frequencies of complexes CH₃CHO…HNO are calculated by both standard and CP‐corrected methods, respectively. Complex A exhibits simultaneously red‐shifted C? H…O and blue‐shifted N? H…O H‐bonds. Complex B possesses simultaneously two blue‐shifted H‐bonds: C? H…O and N? H…O. From NBO analysis, it becomes evident that the red‐shifted C? H…O H‐bond can be explained on the basis of the two opposite effects: hyperconjugation and rehybridization. The blue‐shifted C? H…O H‐bond is a result of conjunct C? H bond strengthening effects of the hyperconjugation and the rehybridization due to existence of the significant electron density redistribution effect. For the blue‐shifted N? H…O H‐bonds, the hyperconjugation is inhibited due to existence of the electron density redistribution effect. The large blue shift of the N? H stretching frequency is observed because the rehybridization dominates the hyperconjugation. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

On the Effect of Tether Composition on cis/trans Selectivity in Intramolecular Diels–Alder Reactions

Intramolecular Diels–Alder (IMDA) transition structures (TSs) and energies have been computed at the B3LYP/6‐31+G(d) and CBS‐QB3 levels of theory for a series of 1,3,8‐nonatrienes, H₂C?CH? CH?CH? CH₂? X? Z? CH?CH₂ [? X? Z? =? CH₂? CH₂? ( 1 ); ? O? C(?O)? ( 2 ); ? CH₂? C(?O)? ( 3 ); ? O? CH₂? ( 4 ); ? NH? C(?O)? ( 5 ); ? S? C(?O)? ( 6 ); ? O? C(?S)? ( 7 ); ? NH? C(?S)? ( 8 ); ? S? C(?S)? ( 9 )]. For each system studied ( 1 – 9 ), cis‐ and trans‐TS isomers, corresponding, respectively, to endo‐ and exo‐positioning of the ? C? X? Z? tether with respect to the diene, have been located and their relative energies (E_rel^TS) employed to predict the cis/trans IMDA product ratio. Although the E_rel^TS values are modest (typically <3 kJ mol^?1), they follow a clear and systematic trend. Specifically, as the electronegativity of the tether group X is reduced (X?O→NH or S), the IMDA cis stereoselectivity diminishes. The predicted stereochemical reaction preferences are explained in terms of two opposing effects operating in the cis‐TS, namely (1) unfavorable torsional (eclipsing) strain about the C4? C5 bond, that is caused by the ? C? X? C(?Y)? group’s strong tendency to maintain local planarity; and (2) attractive electrostatic and secondary orbital interactions between the endo‐(thio)carbonyl group, C?Y, and the diene. The former interaction predominates when X is weakly electronegative (X?N, S), while the latter is dominant when X is more strongly electronegative (X?O), or a methylene group (X?CH₂) which increases tether flexibility. These predictions hold up to experimental scrutiny, with synthetic IMDA reactions of 1 , 2 , 3 , and 4 (published work) and 5 , 6 , and 8 (this work) delivering ratios close to those calculated. The reactions of thiolacrylate 5 and thioamide 8 represent the first examples of IMDA reactions with tethers of these types. Our results point to strategies for designing tethers, which lead to improved cis/trans‐selectivities in IMDAs that are normally only weakly selective. Experimental verification of the validity of this claim comes in the form of fumaramide 14 , which undergoes a more trans‐selective IMDA reaction than the corresponding ester tethered precursor 13 .     

Thermochemical properties for n‐propyl,iso‐propyl,and tert‐butyl nitroalkanes,alkyl nitrites,and their carbon‐centered radicals

Density functional theory (DFT) based calculations are performed on a series of alkyl nitrites and nitroalkanes representing large‐scale primary, secondary, and tertiary nitro compounds and their radicals resulting from the loss of their skeletal hydrogen atoms. Geometries, vibration frequencies, and thermochemical properties [S°(T) and C°_p(T) (10 K ? T ? 5000 K)] are calculated at the B3LYP/6‐31G(d,p) DFT level. Δ_fH°₂₉₈ values are from B3LYP/6‐31G(d,p), B3LYP/6‐31+G(2d,2p), and the composite CBS‐QB3 levels. Potential energy barriers for the internal rotations have been computed at the B3LYP/6‐31G(d,p) level of theory, and the lower barrier contributions are incorporated into entropy and heat capacity data. The standard enthalpies of formation at 298 K are evaluated using isodesmic reaction schemes with several work reactions for each species. Recommended values derived from the most stable conformers of respective nitro‐ and nitrite isomers include ?30.57 and ?28.44 kcal mol^?1 for n‐propane‐, ?33.89 and ?32.32 kcal mol^?1 for iso‐propane‐, ?42.78 and ?41.36 kcal mol^?1 for tert‐butane‐nitro compounds and nitrites, respectively. Entropy and heat capacity values are also reported for the lower homologues: nitromethane, nitroethane, and corresponding nitrites. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 181–199, 2010     

Nitro‐substituted iron(II) tridentate bis(imino)pyridine complexes as high‐temperature catalysts for the production of α‐olefins

A new series of nitro‐substituted bis(imino)pyridine ligands {2,6‐bis[1‐(2‐methyl‐4‐nitrophenylimino)ethyl]pyridine, 2,6‐bis[1‐(4‐nitrophenylimino)ethyl]pyridine, (1‐{6‐[1‐(4‐nitro‐phenylimino)‐ethyl]‐pyridin‐2‐yl}‐ethylidene)‐(2,4,6‐trimethyl‐phenyl)‐amine, and 2,6‐bis[1‐(2‐methyl‐3‐nitrophenylimino)ethyl]pyridine} and their corresponding Fe(II) complexes [{p‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐ Me? p‐NO₂}FeCl₂ ( 10 ), L₂FeCl₂ ( 11 ), {m‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? m‐NO₂}FeCl₂ ( 12 ), and {p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Mes}FeCl₂ ( 14 )] were synthesized. According to X‐ray analysis, there were shortenings of the axial Fe? N bond lengths (up to 0.014 Å) in para‐nitro‐substituted complex 10 and (up to 0.015 Å) in meta‐nitro‐substituted complex 12 versus the Fe(II) complex without nitro groups [{o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me}FeCl₂ ( 1 )]. Complexes 10 , 12 , and 14 afforded very active catalysts for the production of α‐olefins and were more temperature‐stable and had longer lifetimes than parent non‐nitro‐substituted Fe(II) complex 1 . The reaction between FeCl₂ and a sterically less hindered ligand [p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Ph? p‐NO₂] resulted in the formation of octahedral complex 11 . A para‐dialkylamino‐substituted bis(imino)pyridine ligand [p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂] and the corresponding Fe(II) complex [{p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂}FeCl₂ ( 16 )] were synthesized to evaluate the effect of enhanced electron donation of the ligand on the catalytic performance. According to X‐ray analysis, there was a shortening (up to 0.043 Å) of the axial Fe? N bond lengths in para‐diethylamino‐substituted complex 16 in comparison with parent Fe(II) complex 1 . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2615–2635, 2006     

新的杯[4]芳烃衍生物通过缔合乙腈进行自插入的X-射线衍射和密度泛函理论研究

合成和表征了一个新的杯[4]芳烃衍生物，11,23-二羟亚胺甲基-25,27-二羟基-26,28-二丙氧基杯[4]芳烃 (B)及其与乙腈生成的组成为B·2CH₃CN的化合物。¹H NMR显示，在B·2CH₃CN中B采取锥型构象，X-射线衍射分析确证在溶液中所发现的构象。在晶格网络中存在着B·2CH₃CN以二聚体形式的自插入现象。在B3LYP/6-311G(d)水平上计算了该自插入二聚体中的非共价相互作用能，并对基集叠加误差进行了校正。在二聚体中的B·2CH₃CN，一个CH₃CN通过与羟亚胺基形成氢键使之稳定，结合能为–5.02 kJ·mol^-1，另一个CH₃CN则通过与另一个羟亚胺基形成氢键以及与另一B·2CH₃CN中B苯环空腔间的C–H···π相互作用使之稳定，结合能分别为–14.23 kJ·mol^-1和–3.77 kJ·mol^-1。自插入的驱动能为–7.54 kJ·mol^-1。     

Density functional theory and RRKM calculations of decompositions of the metastable E‐2,4‐pentadienal molecular ions

The potential energy profiles for the fragmentations that lead to [C₅H₅O]⁺ and [C₄H₆]^+? ions from the molecular ions [C₅H₆O]^+? of E‐2,4‐pentadienal were obtained from calculations at the UB3LYP/6‐311G + + (3df,3pd)//UB3LYP/6‐31G(d,p) level of theory. Kinetic barriers and harmonic frequencies obtained by the density functional method were then employed in Rice–Ramsperger–Kassel–Marcus calculations of individual rate coefficients for a large number of reaction steps. The pre‐equilibrium and rate‐controlling step approximations were applied to different regions of the complex potential energy surface, allowing the overall rate of decomposition to be calculated and discriminated between three rival pathways: C? H bond cleavage, decarbonylation and cyclization. These processes should have to compete for an equilibrated mixture of four conformers of the E‐2,4‐pentadienal ions. The direct dissociation, however, can only become important in the high‐energy regime. In contrast, loss of CO and cyclization are observable processes in the metastable kinetic window. The former involves a slow 1,2‐hydrogen shift from the carbonyl group that is immediately followed by the formation of an ion‐neutral complex which, in turn, decomposes rapidly to the s‐trans‐1,3‐butadiene ion [C₄H₆]^+?. The predominating metastable channel is the second one, that is, a multi‐step ring closure which starts with a rate‐limiting cis—trans isomerization. This process yields a mixture of interconverting pyran ions that dissociates to the pyrylium ions [C₅H₅O]⁺. These results can be used to rationalize the CID mass spectrum of E‐2,4‐pentadienal in a low‐energy regime. Copyright © 2010 John Wiley & Sons, Ltd.     

Solid‐state CP/MAS 13C NMR studies on conformational polymorphism in sertraline hydrochloride,an antidepressant drug

The C(2) isotropic chemical shift values in solid‐state CP/MAS ¹³C NMR spectra of conformational polymorphs Form I (δ 28.5) and III (δ 22.9) of (1S,4S)‐sertraline HCl ( 1 ) were correlated with a γ‐gauche effect resulting from the respective 162.6° antiperiplanar and 68.8° (+)‐synclinal C(2)? C(1)? N? CH₃ torsion angles as measured by X‐ray crystallography. The similarity of the solution‐state C(2) chemical shifts in CD₂Cl₂ (δ 22.8) and DMSO‐d₆ (δ 23.4) with that for Form III (and other polymorphs having C(2)? C(1)? N? CH₃ (+)‐synclinal angles) strongly suggests that a conformational bias about the C(1)? N bond exists for 1 in both solvents. This conclusion is supported by density functional theory B3LYP/6‐31G(d)‐calculated relative energies of C(1)? N rotameric models: (kcal) 0.00 [73.8 °C(2)? C(1)? N? CH₃ torsion angle], 0.88 (168.7°), and 2.40 (?63.4°). A Boltzmann distribution of these conformations at 25 °C is estimated to be respectively (%) 80.3, 18.3, and 1.4. Copyright © 2002 John Wiley & Sons, Ltd.     

Discrete Cationic Zinc and Magnesium Complexes for Dual Organic/Organometallic‐Catalyzed Ring‐Opening Polymerization of Trimethylene Carbonate

We describe herein an original approach for the efficient immortal ring‐opening polymerization (iROP) of trimethylene carbonate (TMC) under mild conditions using dual‐catalyst systems combining a discrete cationic metal complex with a tertiary amine. A series of new zinc and magnesium cationic complexes of the type [{NNO}M]⁺[anion]^? ({NNO}^?=2,4‐di‐tert‐butyl‐6‐{[(2′‐dimethylaminoethyl)methylamino]methyl}phenolate; M=Zn, [anion]^?=[B(C₆F₅)₄]^? ( 2 ), [H₂N‐ {B(C₆F₅)₃}₂]^? ( 3 ), and [EtB(C₆F₅)₃]^? ( 4 ); M=Mg, [anion]^?=[H₂N{B(C₆F₅)₃}₂]^? ( 7 )) have been prepared from the corresponding neutral compounds [{NNO}ZnEt] ( 1 ) and [{NNO}‐ Mg(nBu)] ( 6 ). Compounds 2 – 4 and 7 exist as free ion pairs, as revealed by ¹H, ¹³C, ¹⁹F, and ¹¹B NMR spectroscopy in THF solution, and an X‐ray crystallographic analysis of the bis(THF) adduct of compound 7 , 7? (THF)₂. The neutral complexes 1 and 6 , in combination with one equivalent or an excess of benzyl alcohol (BnOH), initiate the rapid iROP of TMC, in bulk or in toluene solution, at 45–60 °C (turnover frequency, TOF, up to 25–30 000 mol(TMC)?mol(Zn)?h^?1 for 1 and 220–240 000 mol(TMC)?mol(Mg)?h^?1 for 6 ), to afford H‐PTMC‐OBn with controlled macromolecular features. ROP reactions mediated by the cationic systems 2 /BnOH and 7 /BnOH proceeded much more slowly (TOF up to 500 and 3 000 mol(TMC)?mol(Zn or Mg)?h^?1 at 110 °C) than those based on the parent neutral compounds 1 /BnOH and 6 /BnOH, respectively. Use of original dual organic/organometallic catalyst systems, obtained by adding 0.2–5 equiv of a tertiary amine such as NEt₃ to zinc cationic complexes [{NNO}Zn]⁺[anion]^? ( 2 – 4 ), promoted high activities (TOF up to 18 300 mol(TMC)?mol(Zn)?h^?1 at 45 °C) giving H‐PTMC‐OBn with good control over the M_n and M_w/M_n values. Variation of the nature of the anion in 2 – 4 did not significantly affect the performance of these catalyst systems. On the other hand, the dual magnesium‐based catalyst system 7 /NEt₃ proved to be poorly effective.     

Synthetic,spectral, thermal and antimicrobial studies on some bis(N,N′‐dialkyldithiocarbamato) antimony(III) alkylenedithiophosphates

Bis(N, N′‐dialkyldithiocarbamato)antimony(III) alkylenedithiophosphates of the type [R₂NCS₂]₂ SbS(S)POGO [where NR₂ = N(CH₃)₂, N(C₂H₅)₂ and N(CH₂)₄; G = ? CH₂? C(C₂H₅)₂? CH₂? , ? CH₂? C(CH₃)₂? CH₂? , ? CH(CH₃)? CH(CH₃)? and ? C(CH₃)₂? C(CH₃)₂? ] were synthesized and characterized by physico‐chemical, spectral [UV, IR and NMR (¹H, ¹³C and ³¹P)] and thermal (TG, DTA and DSC) analysis. The TG decomposition analysis step of the complex indicated the formation of Sb₂S₃ as the final product. The first endothermic peak in DSC indicated the melting point of the complexes. These complexes were screened for their antimicrobial activities using the disk diffusion method. All the complexes showed good activity as antibacterial and antifungal agents on some selected bacterial and fungal strains, which increased on increasing the concentration. Chloroamphenicol and terbinafin were used as standards for comparison. Copyright © 2007 John Wiley & Sons, Ltd.     

Ligand‐Centred Reactivity of Bis(picolyl)amine Iridium: Sequential Deprotonation,Oxidation and Oxygenation of a “Non‐Innocent” Ligand

Treatment of [Ir(bpa)(cod)]⁺ complex [ 1 ]⁺ with a strong base (e.g., tBuO^?) led to unexpected double deprotonation to form the anionic [Ir(bpa?2H)(cod)]^? species [ 3 ]^?, via the mono‐deprotonated neutral amido complex [Ir(bpa?H)(cod)] as an isolable intermediate. A certain degree of aromaticity of the obtained metal–chelate ring may explain the favourable double deprotonation. The rhodium analogue [ 4 ]^? was prepared in situ. The new species [M(bpa?2H)(cod)]^? (M=Rh, Ir) are best described as two‐electron reduced analogues of the cationic imine complexes [M^I(cod)(Py‐CH₂‐N?CH‐Py)]⁺. One‐electron oxidation of [ 3 ]^? and [ 4 ]^? produced the ligand radical complexes [ 3 ]^. and [ 4 ]^.. Oxygenation of [ 3 ]^? with O₂ gave the neutral carboxamido complex [Ir(cod)(py‐CH₂‐N‐CO‐py)] via the ligand radical complex [ 3 ]^. as a detectable intermediate.     

Theoretical Study on Gas—phase Pyrolytic Reactions of N—Ethyl,Isopropyl and N—t—Butyl Substituted 2—Aminopyrazine

Density functional theory (DFT) and ab initio methods were used to study gas‐phase pyrolytic reaction mechanisms of iV‐ethyl, N‐isopropyl and N‐t‐butyl substituted 2‐aminopyrazine at B3LYP/6–31G* and MP2/6–31G*, respectively. Single‐point energies of all optimized molecular geometries were calculated at B3LYP/6–311 + G(2d,p) level. Results show that the pyrolytic reactions were carried out through a unimolecular first‐order mechanism which were caused by the migration of atom H(17) via a six‐member ring transition state. The activation energies which were verified by vibrational analysis and correlated with zero‐point energies along the reaction channel at B3LYP/6–311 + G(2d,p) level were 252.02 kJ. mo^?1 (N‐ethyl substituted), 235.92 kJ‐mol^?1 (N‐t‐isopropyl substituted) and 234.27 kJ‐mol^?1 (N‐t‐butyl substituted), respectively. The results were in good agreement with available experimental data.     

Hydrosilylation Induced by N→Si Intramolecular Coordination: Spontaneous Transformation of Organosilanes into 1‐Aza‐Silole‐Type Molecules in the Absence of a Catalyst

Our attempts to synthesize the N→Si intramolecularly coordinated organosilanes Ph₂L¹SiH ( 1 a ), PhL¹SiH₂ ( 2 a ), Ph₂L²SiH ( 3 a ), and PhL²SiH₂ ( 4 a ) containing a CH?N imine group (in which L¹ is the C,N‐chelating ligand {2‐[CH?N(C₆H₃‐2,6‐iPr₂)]C₆H₄}^? and L² is {2‐[CH?N(tBu)]C₆H₄}^?) yielded 1‐[2,6‐bis(diisopropyl)phenyl]‐2,2‐diphenyl‐1‐aza‐silole ( 1 ), 1‐[2,6‐bis(diisopropyl)phenyl]‐2‐phenyl‐2‐hydrido‐1‐aza‐silole ( 2 ), 1‐tert‐butyl‐2,2‐diphenyl‐1‐aza‐silole ( 3 ), and 1‐tert‐butyl‐2‐phenyl‐2‐hydrido‐1‐aza‐silole ( 4 ), respectively. Isolated organosilicon amides 1 – 4 are an outcome of the spontaneous hydrosilylation of the CH?N imine moiety induced by N→Si intramolecular coordination. Compounds 1–4 were characterized by NMR spectroscopy and X‐ray diffraction analysis. The geometries of organosilanes 1 a – 4 a and their corresponding hydrosilylated products 1 – 4 were optimized and fully characterized at the B3LYP/6‐31++G(d,p) level of theory. The molecular structure determination of 1 – 3 suggested the presence of a Si?N double bond. Natural bond orbital (NBO) analysis, however, shows a very strong donor–acceptor interaction between the lone pair of the nitrogen atom and the formal empty p orbital on the silicon and therefore, the calculations show that the Si?N bond is highly polarized pointing to a predominantly zwitterionic Si⁺N^? bond in 1 – 4 . Since compounds 1 – 4 are hydrosilylated products of 1 a – 4 a , the free energies (ΔG₂₉₈), enthalpies (ΔH₂₉₈), and entropies (ΔH₂₉₈) were computed for the hydrosilylation reaction of 1 a – 4 a with both B3LYP and B3LYP‐D methods. On the basis of the very negative ΔG₂₉₈ values, the hydrosilylation reaction is highly exergonic and compounds 1 a – 4 a are spontaneously transformed into 1 – 4 in the absence of a catalyst.     

Pyridine‐Enhanced Head‐to‐Tail Dimerization of Terminal Alkynes by a Rhodium–N‐Heterocyclic‐Carbene Catalyst

A general regioselective rhodium‐catalyzed head‐to‐tail dimerization of terminal alkynes is presented. The presence of a pyridine ligand (py) in a Rh–N‐heterocyclic‐carbene (NHC) catalytic system not only dramatically switches the chemoselectivity from alkyne cyclotrimerization to dimerization but also enhances the catalytic activity. Several intermediates have been detected in the catalytic process, including the π‐alkyne‐coordinated Rh^I species [RhCl(NHC)(η²‐HC?CCH₂Ph)(py)] ( 3 ) and [RhCl(NHC){η²‐C(tBu)?C(E)CH?CHtBu}(py)] ( 4 ) and the Rh^III–hydride–alkynyl species [RhClH{? C?CSi(Me)₃}(IPr)(py)₂] ( 5 ). Computational DFT studies reveal an operational mechanism consisting of sequential alkyne C? H oxidative addition, alkyne insertion, and reductive elimination. A 2,1‐hydrometalation of the alkyne is the more favorable pathway in accordance with a head‐to‐tail selectivity.     

复合物HNO···H2O2内N-H···O蓝移氢键的理论研究

A theoretical study on the blue-shifted H-bond N-H…O and red-shifted H-bond O-H…O in the complexHNO…H_2O_2 was conducted by employment of both standard and counterpoise-corrected methods to calculate thegeometric structures and vibrational frequencies at the MP2/6-31G(d),MP2/6-31 G(d,p),MP2/6-311 q G(d,p),B3LYP/6-31G(d),B3LYP/6-31 G(d,p) and B3LYP/6-311 G(d,p) levels.In the H-bond N-H…O,the calcu-lated blue shift of N-H stretching frequency is in the vicinity of 120 cm~(-1) and this is indeed the largest theoreticalestimate of a blue shift in the X-H…Y H-bond ever reported in the literature.From the natural bond orbital analy-sis,the red-shifted H-bond O-H…O can be explained on the basis of the dominant role of the hyperconjugation.For the blue-shifted H-bond N-H…O,the hyperconjugation was inhibited due to the existence of significant elec-tron density redistribution effect,and the large blue shift of the N-H stretching frequency was prominently due tothe rehybridization of sp~n N-H hybrid orbital.     

Boosting Low‐Valent Aluminum(I) Reactivity with a Potassium Reagent

The reagent RK [R=CH(SiMe₃)₂ or N(SiMe₃)₂] was expected to react with the low‐valent (^DIPPBDI)Al (^DIPPBDI=HC[C(Me)N(DIPP)]₂, DIPP=2,6‐iPr‐phenyl) to give [(^DIPPBDI)AlR]^?K⁺. However, deprotonation of the Me group in the ligand backbone was observed and [H₂C=C(N‐DIPP)?C(H)=C(Me)?N?DIPP]Al^?K⁺ ( 1 ) crystallized as a bright‐yellow product (73 %). Like most anionic Al^I complexes, 1 forms a dimer in which formally negatively charged Al centers are bridged by K⁺ ions, showing strong K⁺???DIPP interactions. The rather short Al–K bonds [3.499(1)–3.588(1) Å] indicate tight bonding of the dimer. According to DOSY NMR analysis, 1 is dimeric in C₆H₆ and monomeric in THF, but slowly reacts with both solvents. In reaction with C₆H₆, two C?H bond activations are observed and a product with a para‐phenylene moiety was exclusively isolated. DFT calculations confirm that the Al center in 1 is more reactive than that in (^DIPPBDI)Al. Calculations show that both Al^I and K⁺ work in concert and determines the reactivity of 1 .     

3‐Rhoda‐1,2‐diazacyclopentanes: A Series of Novel Metallacycle Complexes Derived From CN Functionalization of Ethylene

Rh‐containing metallacycles, [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NR)₂‐]Cl; TPA=N,N,N,N‐tris(2‐pyridylmethyl)amine have been accessed through treatment of the Rh^I ethylene complex, [(TPA)Rh(η²‐CH₂CH₂)]Cl ([ 1 ]Cl) with substituted diazenes. We show this methodology to be tolerant of electron‐deficient azo compounds including azo diesters (RCO₂N?NCO₂R; R=Et [ 3 ]Cl, R=iPr [ 4 ]Cl, R=tBu [ 5 ]Cl, and R=Bn [ 6 ]Cl) and a cyclic azo diamide: 4‐phenyl‐1,2,4‐triazole‐3,5‐dione (PTAD), [ 7 ]Cl. The latter complex features two ortho‐fused ring systems and constitutes the first 3‐rhoda‐1,2‐diazabicyclo[3.3.0]octane. Preliminary evidence suggests that these complexes result from N–N coordination followed by insertion of ethylene into a [Rh]?N bond. In terms of reactivity, [ 3 ]Cl and [ 4 ]Cl successfully undergo ring‐opening using p‐toluenesulfonic acid, affording the Rh chlorides, [(TPA)Rh^III(Cl)(κ¹‐(C)‐CH₂CH₂(NCO₂R)(NHCO₂R)]OTs; [ 13 ]OTs and [ 14 ]OTs. Deprotection of [ 5 ]Cl using trifluoroacetic acid was also found to give an ethyl substituted, end‐on coordinated diazene [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NH)₂‐]⁺ [ 16 ]Cl, a hitherto unreported motif. Treatment of [ 16 ]Cl with acetyl chloride resulted in the bisacetylated adduct [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NAc)₂‐]⁺, [ 17 ]Cl. Treatment of [ 1 ]Cl with AcN?NAc did not give the Rh?N insertion product, but instead the N,O‐chelated complex [(TPA)Rh^I ( κ²‐(O,N)‐CH₃(CO)(NH)(N?C(CH₃)(OCH?CH₂))]Cl [ 23 ]Cl, presumably through insertion of ethylene into a [Rh]?O bond.     

Struktur und Eigenschaften des Hydridomethyltetrafluorphosphatanions, [CH3PF4H]—

Structure and Properties of the Hydridomethyltetrafluorophosphate Anion, [CH₃PF₄H]^— Methyltrifluorphosphorane reacts with strong fluoride donors like CsF, (CH₃)₄NF and (CH₃)₄PF with formation of the corresponding hydridomethyltetrafluorophosphates. The salts are characterized by NMR, IR and Raman spectroscopy. The experimental results show that only the trans isomer is formed. For both isomers theoretical calculations (B3LYP/6‐31+G* and RHF/6‐31+G*) were carried out. The difference for the Gibbs free energy between the isomers was calculated to be 35.4 kJ/mol (B3LYP/6‐31+G*). The RHF/6‐31+G* calculation yields, for the almost octahedral trans isomer, bond distances of r(PF) = 167 pm, r(PC) = 184.5 pm and r(PH) = 138.1 pm.     

Synthesis,Interionic Structure,and Reactivity toward CO and p‐Methylstyrene of Palladacyclic Compounds Bearing α‐Diimine Ligands

Palladacyclic compounds [Pd(C₆H₄(C₆H₅C?O)C?N? R)(N? N)] [X] (R = Et, ⁱPr, 2,6‐ⁱPr₂C₆H₃; N? N = bpy = 2,2′‐bipyridine, or 1,4‐(o,o′‐dialkylaryl)‐1,4‐diazabuta‐1,3‐dienes; [X]^? = [BF₄]^? or [PF₆]^?) were synthesized from the dimers [{Pd(C₆H₄(C₆H₅C?O)C?N? R)(μ‐Cl)}₂] and N? N ligands. Their interionic structure in CD₂Cl₂ was determined by means of ¹⁹F,¹H‐HOESY experiments and compared with that in the solid state derived from X‐ray single‐crystal studies. [Pd(C₆H₄(C₆H₅C?O)C?N? R)(N? N)] [X] complexes were found to copolymerize CO and p‐methylstyrene affording syndiotactic or isotactic copolymers when bpy or 1,4‐(o,o′‐dimethylaryl)‐1,4‐diazabuta‐1,3‐dienes were used, respectively. The reactions with CO and p‐methylstyrene of the bpy derivatives were investigated. Two intermediates derived from a single and a double insertion of CO into the Pd? C bonds were isolated and completely characterized in solution.     

UHMWPE with short‐chain branches synthesized by alkenyl substituted phenoxy–imine catalysts in ethylene polymerization

The alkenyl substituted phenoxy–imine complexes [2‐C₃H₅‐6‐(2, 3, 5, 6‐C₆F₄H‐N?CH)C₆H₃O]₂TiCl₂ (C₃H₅=? CH₂? CH?CH₂ or ? CH?CH? CH₃) are synthesized and characterized by ¹H NMR, ¹³C NMR, and elemental analysis. When activated by MAO, they show high activity for the polymerization of ethylene to UHMWPE under different conditions (temperatures and polymerization time). Most of the resulting polymers have high molecular weights (>1.0 × 10⁶ g·mol^?1) and high melting points as well as crystallinity. To clarify the effect of the alkenyl group on the catalytic performance and the resultant polymer microstructure, the corresponding saturated complexes of type [2‐C₃H₇?6‐(2, 3, 5, 6‐C₆F₄H‐N?CH)C₆H₃O]₂TiCl₂ where C₃H₇ = –CH₂? CH₂? CH₃ or ? CH(CH₃)₂ were synthesized and tested as catalysts in ethylene polymerization under the same reaction conditions. The microstructure and morphologies of these two species of PE samples were fully compared by the analysis of ¹³C NMR, GPC, DSC, and SEM. As a result, the allyl substituted complex show the highest activity to prepare the highest molecular weight polyethylene of all the catalysts. An interesting feature of the UHMWPE produced by these four catalysts is that they contain only a few short‐chain branches (mainly methyl, isobutyl and 2‐methylhexyl branches) in a low amount (<2.7 branches/1000 C). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3808–3818