Surface properties of plasma-modified polypropylene and propylene-hexene-1 copolymer films

The surface properties of polypropylene and propylene and hexene-1 copolymers synthesized on the rac-Me₂SiInd₂ZrCl₂-polymethylalumoxane isocpecific metallocene system and the Ph₂C(Cp)(Flu)ZrCl₂-polymethylalumoxane syndiospecific system were studied. It was found that syndiotactic polypropylene films were less hydrophobic than isotactic polypropylene films, whereas the films of propylene and hexene-1 copolymers were less hydrophobic than the films of corresponding homopolymers. The hydrophobicity of samples decreased with the hexene-1 content of the copolymer. Treatment in a dc discharge resulted in noticeable surface hydrophilization in all of the test polymer samples. There is a correlation between the surface parameters and the density of surface charge induced in the polymers by dc discharge treatment.     

Structural transitions in propylene-1-hexene copolymer films during low-temperature plasma treatment

The effect of a dc discharge on the structure of film samples of isotactic and syndiotactic polypropylene, as well as propylene-1-hexene copolymers with isotactic and syndiotactic sequences, was studied. It was found that the plasma treatment of homopolymer films did almost not change their phase composition. However, in the propylene copolymers with 1-hexene (0.9 and 1.7 mol % 1-hexene) synthesized in an isospecific system, the γ-to-α phase transition was observed. The structural transition from a maximally ordered crystalline modification of form I, which has a body-centered orthorhombic unit cell, to a maximally disordered form of I, which has a simple orthorhombic unit cell, also occurred in a copolymer (1.1 mol % 1-hexene) synthesized in a syndiospecific system. It was found that an electric field that resulted from the localization of plasma electrons in the surface layers of polymer samples was responsible for the structural transformations observed.     

A novel efficient Ti(O-<Emphasis Type="Italic">iso</Emphasis>-C<Subscript>3</Subscript>H<Subscript>7</Subscript>)<Subscript>4</Subscript>-based olefin polymerization catalyst system

The polymerization of ethylene and propylene and the copolymerization of ethylene and hexene-1 with a Ti(O-iso-Pr)₄–AlR₂Cl/MgBu₂ catalyst system have been studied. The advantages of this system over metallocene and postmetallocene catalysts are high activity, low cost, and ease of synthesis. The resulting polymers and copolymers are characterized by a broad molecular-mass distribution, which reflects the heterogeneity of the active sites with respect to kinetic parameters. As a consequence, the ethylene/hexene-1 copolymers exhibit compositional heterogeneity. The active sites of the system produce copolymers with a pronounced tendency toward alternation of monomer units. The propylene polymerization product is mostly amorphous atactic polypropylene.     

Aging and degradation of polyolefins. III. Polyethylene and ethylene–propylene copolymers

Rates of oxygen absorption and formation of oxidation products were determined in γ-initiated oxidations of thin films of high- and low-density polyethylene, atactic and isotactic polypropylene, and of three ethylene–propylene copolymers. Radiation yields G for O₂ absorbed and formation of hydroperoxides depend on dose rates and decrease sharply with increasing ethylene content of the copolymers and moderately with increasing crystallinity of any base polymer. G values for dialkyl peroxide and carbonyl formation, and therefore for chain initiation and termination, do not change much with polymer composition and crystallinity and not at all with dose rates. A few experiments with atactic polypropylene and an amorphous ethylene–propylene copolymer, initiated by di-tert-butylperoxy oxalate, indicate that 37 mole-% of ethylene in the polymer increases the efficiency of initiation and the tendency toward crosslinking.     

Studies on copolymerization of N-isopropylacrylamide with poly(ethylene glycol) methacrylate

The paper describes the preparation and characterization of cross-linked homopolymers and copolymers of N-isopropyl acrylamide (NIPAAm) with poly(ethylene glycol) methacrylate (PEGMA, M_n = 526 g/mol). Several copolymer samples were prepared by taking varying amounts of monomers i.e. NIPAAm and PEGMA in the initial feed using hydrophilic (IRGACURE-2959) and hydrophobic (DURACURE-1173) photoinitiator. In order to investigate the effect of reaction conditions, copolymers were prepared below or above the lower critical solution temperature (LCST) using water or water:ethanol (50:50) as solvent and by varying the amounts of cross-linker. Hydrogels prepared under varying reaction conditions were characterized for its swelling behaviour (using optical microscope), phase transition temperature (using DSC) and morphology (using SEM). As expected LCST increased from 35 to 39 °C as PEGMA content in copolymers increased from 1 to 20% (w/w). However, the morphology of hydrogels was found to be independent on the reaction conditions.Copolymer films having an optimum combination of swelling and performance properties were evaluated as switchable cell culture membranes. Hepatic cancer cell lines (Hep G-2) was used to study the cell growth and detachment. Cell growth and detachment were found to be dependent on the copolymer composition. Cell viability was found comparable to trypsin which also supports application of these films as cell culture membrane.     

Phase behavior of biodegradable amphiphilic poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide)

This study describes the miscibility phase behavior in two series of biodegradable triblock copolymers, poly(l-lactide)-block-poly(ethylene glycol)-block-poly(l-lactide) (PLLA-PEG-PLLA), prepared from two di-hydroxy-terminated PEG prepolymers (M_n = 4000 or 600 g mol⁻¹) with different lengths of poly(l-lactide) segments (polymerization degree, DP = 1.2-145.6). The prepared block copolymers presented wide range of molecular weights (800-25,000 g mol⁻¹) and compositions (16-80 wt.% of PEG). The copolymer multiphases coexistance and interaction were evaluated by DSC and TGA. The copolymers presented a dual stage thermal degradation and decreased thermal stability compared to PEG homopolymers. In addition, DSC analyses allowed the observation of multiphase separation; the melting temperature, T_m, of PLLA and PEG phases depended on the relative segment lengths and the only observed glass transition temperature (T_g) in copolymers indicated miscibility in the amorphous phase.     

Sequence distributions versus catalyst site behavior of in situ blends of polypropylene and poly(ethylene-co-propylene)

Sequential polymerizations of first propylene and then ethylene, propylene mixtures with the same Ziegler–Natta catalyst system produce in situ blends known as high-impact polypropylenes. Over 100 high-impact polypropylenes are characterized in terms of weight fractions and sequence distributions for isotactic polypropylene, atactic polypropylene, an amorphous ethylene propylene copolymer, and a crystalline ethylene propylene copolymer. The apparent r₁r₂ behaviors of the E/P copolymers suggest that the amorphous and crystalline E/P copolymers principally arise from different types of catalyst sites as opposed to originating strictly from compositional heterogeneities. The amorphous copolymers consistently have r₁r₂ values close to unity over a broad range of compositions, while the corresponding crystalline copolymers have apparent r₁r₂ values that range from 2 to over 20. An apparent r₁r₂ close to unity not only reflects random sequencing but also indicates a narrow compositional distribution. This r₁r₂ result indicates that the amorphous E/P copolymers are produced from a singular type of catalyst site. The higher r₁r₂ values shown by the crystalline E/P copolymers indicate broad compositional distributions that are produced by a different type or types of catalyst sites. The ratio of amorphous to crystalline ethylene, propylene copolymers is nominally around 80/20 over a broad range of impact copolymer compositions. The consistency of this result suggests that the two basic types of catalyst sites producing E/P copolymers are also in an approximate 80/20 ratio. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1527–1542, 1998     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).     

Synthesis and phase separation of amine-functional temperature responsive copolymers based on poly(N-isopropylacrylamide)

Free radical copolymerizations of N-isopropyl acrylamide (NIPAM) and cationic N-(3-aminopropyl) methacrylamide hydrochloride (APMH) were investigated to prepare amine-functional temperature responsive copolymers. The reactivity ratios for NIPAM and APMH were evaluated in media of different ionic strength (r_NIPAM = 0.7 and r_APMH = 0.7-1.2). Phase separation behavior of the random copolymers with only 5 mol% of the APMH was found to be suppressed in pure water at temperatures up to 45 °C due to electrostatic repulsion among the cationic amine groups randomly distributed along the copolymer chain. Alternate sequential addition of PNIPAM/APMH mixtures and pure NIPAM was used to provide increased control of the location of APMH units along the chain. Consequently (close to) homo-PNIPAM block(s) were formed as evidenced by its characteristic phase transition at 33 °C. The influences of the monomer feeding time and feeding interval time to the APMH distribution were investigated to prepare copolymers with thermo-induced phase separation under physiologically relevant temperature and to determine the extent of conjugation to poly(ethylene oxide).     

The comonomer inducing selective β‐methyl elimination chain transfer: A new approach for end‐functionalizations of syndiotactic polypropylene‐based copolymers

The end‐functionalization of syndiotactic polypropylene‐based copolymers can be accomplished by conducting propylene polymerization in the presence of norbornene using Me₂C(Cp)(Flu)ZrCl₂/MAO as the catalyst. The detailed structural analyses clearly reveal the occurrence of the β‐methyl elimination chain transfer reaction that leads to the generation of the ethenyl group end‐capped syndiotactic polypropylene‐based propylene–norbornene copolymer. Subsequently, the ethenyl group end‐capped copolymer can be used for the preparation of other end‐functionalized syndiotactic polypropylene‐based copolymers by conducting organic functional group transformation reactions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2167–2176, 2008     

One-pot, novel chemical modification of glycidyl methacrylate copolymers with very bulky organosilicon side chain substituents

Glycidyl methacrylate (GM) random copolymers with styrene and methylstyrene (in a 1:1 and 1:3 mole ratio) were synthesized by solution free radical polymerizations at 70 ± 1 °C using α,α′-azoisobutyronitrile as an initiator. The copolymer compositions were obtained using related ¹H NMR spectra and the polydispersity indices of the copolymers determined using gel permeation chromatography (GPC). Both types of polymer could be modified by incorporation of the highly sterically demanding tris(trimethylsilyl)methyl substituent (Me₃Si)₃C-(Tsi = trisyl) through the ring opening reaction of the epoxy groups in copolymers. Chemical modification was determined by ¹H NMR and infrared spectroscopies. The glass transition temperature T_g of all copolymers was determined by differential scanning calorimetry (DSC). The T_g value of the copolymers containing bulky trisyl groups was found to increase with incorporation of trisyl groups in polymer structures. The presence of trisyl groups in the polymer side chain created new macromolecules with novel modified properties and potential use as membranes for fluid separation.     

Synthesis of polypropylene block copolymers from brominated styrene-terminated isotactic polypropylene

Isotactic polypropylene block copolymers, isotactic-polypropylene-block-poly (methyl methacrylate) (i-PP-b-PMMA) and isotactic-polypropylene-block-polystyrene (i-PP-b-PS), were prepared by atom transfer radical polymerization (ATRP) using a brominated styrene-terminated isotactic polypropylene macroinitiator synthesized from bromination of styrene-terminated isotactic polypropylene. The styrene-terminated isotactic polypropylene can be obtained by polymerization of propylene in the presence of styrene and hydrogen chain transfer agents using a rac-Me₂Si[2-methyl-4-(1-naphyl)Ind]₂ZrCl₂ as catalyst. The molecular weights of isotactic polypropylene block copolymers were controlled by altering the amount of hydrogen used in the polymerization of propylene and the amount of monomer used in the blocking reaction. The effect of i-PP-b-PS block copolymer on PP-PS blends and that of i-PP-b-PMMA block copolymer on PP-PMMA blends were studied by scanning electron microscopy.     

High conductive copolymers of polypyrrole-α,ω-diamine polydimethylsiloxane

Block copolymers of α,ω-diamine polydimethylsiloxane (DA · PDMS) and polypyrrole have been produced by the polymerization of pyrrole with the redox system of ceric salt/DA · PDMS. The properties of the copolymers may be regulated by the ratio of DA · PDMS/Pyrrole/Ce₄(NH₄)₂(NO₃)₆. The copolymers with lower conductivities are soluble in solvents such as DMF and acetone but higher conductive copolymers are insoluble. A block copolymer with unusually high conductivity (4000 S/cm) was produced under one specific polymerization condition. The chemical structure and the surface morphology of the copolymer particles seem to be important for high conductivity.     

H NMR and IR study of temperature-induced phase transition of negatively charged poly(N-isopropylmethacrylamide-co-sodium methacrylate) copolymers in aqueous solutions

¹H NMR and IR spectroscopies were used to investigate the temperature-induced phase transition behaviour of poly(N-isopropylmethacrylamide-co-sodium methacrylate) [P(IPMAAm/MNa)] copolymers, containing in aqueous solutions negatively charged MNa units (i = 1-10 mol%), and the obtained results were compared with those obtained for poly(N-isopropylmethacrylamide) (PIPMAAm) homopolymer. For PIPMAAm/H₂O solution, IR spectra indicate that the transition temperatures for the hydrophilic CO groups are slightly higher (by ∼ 2 K) in comparison with hydrophobic CH₃ groups. The decreasing values of phase-separated fraction p_max and the decrescent hysteresis during gradual heating and cooling, both with increasing content of MNa units i in the copolymer, show that for copolymers with i ? 5 mol% the globular-like structures formed at temperatures above the respective LCST are rather porous and disordered with relatively low degree of polymer-polymer hydrogen bonding. While for P(IPMAAm/MNa) copolymers with i ? 5 mol% most water molecules are expelled from globular structures, for i < 5 mol% a certain portion of water (HDO) molecules is rather tightly bound in globular structures; at the same time no releasing process was detected for the bound water even for 90 h.     

Synthesis and properties of poly(aryl ether benzimidazole) copolymers for high-temperature fuel cell membranes

A series of poly(aryl ether benzimidazole) copolymers bearing different aryl ether linkage contents were synthesized by condensation polymerization in polyphosphoric acid (PPA) by varying the feed ratio of 4,4′-dicarboxydiphenyl ether (DCPE) to terephthalic acid (TA). As the ether unit content in the copolymer increased, the solubility of the copolymer in PPA and N,N′-dimethylacetamide/LiCl improved. For example 3–7 wt.% DMAc solution containing 2 wt.% of LiCl could be prepared from the copolymers. XRD studies revealed that the incorporation of flexible aryl ether linkages increased the chain d-spacings of the polymer backbones and decreased the crystallinity of the copolymers. Still, these copolymers having ether linkages showed reasonably good thermal/mechanical stability and high proton conductivity. For example, the copolymer with 30 mol% ether linkage had a tensile strength of 43 MPa (at 26 °C and 40% relative humidity) at an acid doping level of 7.5 mol H₃PO₄ and a proton conductivity of 0.098 S cm⁻¹ (at 180 °C and 0% relative humidity) at an acid doping level of 6.6 mol H₃PO₄.     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

Synthesis and degradation of novel photocrosslinkable aromatic copolyanhydrides

Novel photocrosslinkable degradable aromatic copolyanhydrides have been prepared by melt-polycondensation from 1,6-bis(p-carboxyphenoxy)hexane (CPH) and 4,4′-(sebacoyldioxy)dicinnamic acid (CSC) derived from 4-hydroxycinnamic acid and sebacoyl chloride. FT-IR and ¹H NMR confirmed the copolymer structures. These copolymers were subsequently irradiated with a 400 W high-pressure mercury lamp (λ > 28 nm) to produce crosslinked materials. The gel yields of copolymers increased with increasing irradiation time and/or CSC contents. The photocrosslinking significantly enhanced the tensile strength at break (σ_b) and tensile modulus (E), but decreased the elongation at break (ε_b). The crosslinked CPH/CSC(25/75) film with gel content of 90% showed the highest σ_b of 28 MPa and E of 742 MPa. The degradation characteristics of copolymer films was investigated in a phosphate buffer solution (pH 7.2 and 10.0) at 37 °C by mass loss, molecular weight reduction by GPC and contact angle measurement. The induction period was detected for all copolyanhydrides, and the rate of degradation of copolyanhydrides was much higher than that of PCPH.     

Radical copolymerization of vinylidene fluoride with perfluoroalkylvinyl ethers

The radical copolymerization of perfluoromethylvinyl ether (PMVE) and perfluoropropylvinyl ether (PPVE) with vinylidene fluoride (VDF), initiated by tertiobutyl peroxypivalate (TBPPI) and ditertiobutyl peroxide (DTBP), respectively, are presented. The kinetics of copolymerization were investigated for each monomer from series of at least eight reactions for which the initial [VDF]₀/[fluorinated vinyl ether]₀ molar ratios ranged between 20/80 and 80/20. The copolymer compositions of these random-type copolymers were calculated by means of ¹⁹F NMR spectroscopy and allowed one to quantify the respective amounts of each monomeric unit in the copolymer. According to the Tidwell and Mortimer method, the reactivity ratios (r_i) of both comonomers for each type of copolymerization were obtained : r_VDF = 3.40 ± 0.40 and r_PMVE = 0 at 74 °C; and r_VDF = 1.15 ± 0.36 and r_PPVE = 0 at 120 °C. Moreover, the glass transition temperatures (T_g’s) of poly(VDF-co-PMVE) and poly(VDF-co-PPVE) copolymers containing different amounts of VDF and PMVE or PPVE, were determined and the theoretical glass transition temperatures of poly(PMVE) and poly(PPVE) homopolymer were deduced.     

Synthesis and optical properties of fluorene and p-phenylenevinylene copolymers containing non-conjugated spacer

A series of alternating fluorene and p-phenylenevinylene copolymers containing non-conjugated spacer have been synthesized through the Wittig polycondensation reaction. These amorphous copolymers are highly soluble in common organic solvents and can be spin-cast to obtain transparent films. The effects of non-conjugated spacers in the main chain and the methoxyl groups on the side chain on the thermal behavior, photoluminescence (PL) and electroluminescence (EL) properties of these copolymers have been investigated in detail. Single-layered light-emitting diodes (LEDs) have been fabricated in the configuration of ITO/PEDOT/copolymer/Ca/Al and emitted blue light in the range of 456-492 nm. The measurements of current vs voltage show turn-on voltages at 6.2-12.4 V. Among the LEDs based on the six copolymers, the maximum EL brightness and efficiency of the LED based on P1 containing 4CH₂ aliphatic segment length in the main chain and without methoxyl groups on side chain are reached 3936 cd/m² and 0.70 cd/A, respectively.     

Raman Structural Study of Copolymers of Propylene with Ethylene and High Olefins

Nascent form of random copolymers of propylene with ethylene, 1-butene, 1-hexene, 1-octene, and 4-methyl-1-pentene was studied by Raman spectroscopy. The most significant spectral alterations with a change in propylene content were observed in two lines at 809 and 841 cm⁻¹. The first line corresponds to vibrations of polypropylene helical chains in the crystalline phase, while the second one is associated with vibrations of polypropylene helical chains having isomeric defects. Raman data confirm that conformational composition and phase state of copolymer macromolecules strongly depend on the comonomer content as well as on the size of the comonomer units.