高磺化-β-环糊精毛细管电泳分离分析手性芳香仲醇

以高磺化-β-环糊精为毛细管电泳手性选择剂,建立了有效分离7种手性芳香仲醇对映体的方法.在20 mmol/L H3PO4-三乙醇胺为背景电解质(pH 2.5),6%(m/V) 高磺化-β-环糊精为手性选择剂(S-β-CD),柱温20 ℃,操作电压-15 kV,检测波长214 nm等优化条件下,所有芳香仲醇对映体均实现基线分离.以本方法测定了7种芳香酮不对称氢转移反应产物7种手性芳香仲醇的百分对映体过量值(% ee),其测定结果与高效液相色谱、气相色谱测定结果完全一致.本方法可以用于手性芳香仲醇光学纯度的测定.     

8种芳香醇对映体的毛细管区带电泳手性拆分及其光学纯度分析

采用毛细管电泳(CE)手性分离方法对8种不同取代基的芳香醇对映体样品的光学纯度进行分析。通过对手性选择剂β-CD-NH3Cl的浓度、背景电解质的浓度、pH值及操作电压等影响因素的研究,优化了分离条件,成功地对8种芳香醇对映体样品进行了手性拆分;同时,对8种对映体样品进行了光学纯度检查,并与HPLC测定结果进行比较。结果表明,3批样品中对映体过量(e.e.%)测定值与HPLC法的测定结果相一致。该方法简单、准确,可用于该8种不同取代基芳香醇的手性拆分和e.e.%值的测定。     

基于非手性离子液体的毛细管电泳法拆分3种手性药物

建立了以非手性离子液体1-正丁基-3-甲基咪唑氯(［BMIM］Cl)为手性分离的添加剂、β-环糊精作为手性选择剂的毛细管区带电泳(CZE)分离扑尔敏、氯霉素前体和氧氟沙星3种对映体的方法,并与未添加［BMIM］Cl的CZE分离情况进行了对比研究。发现［BMIM］Cl对手性药物的拆分有协同作用,不仅能够增加对映体的分离度,还能有效地抑制毛细管内壁对样品分子的吸附作用,改善峰形。采用离子液体辅助手性选择剂(尤其是环糊精)的CZE改进方法,为其他毛细管电泳难以分离的手性药物的分离分析提供了新的方法。     

聚合-β-环糊精作手性选择剂的毛细管电泳法分离4种光学活性农药中间体

以聚合-β-环糊精作为毛细管区带电泳手性选择剂,成功分离了2-苯氧丙酸(PPA)、顺式-功夫菊酸(cis-PA)、1-苯基-2-(对甲苯基)乙胺(PTE)和1-苯基-2-(对甲氧基苯基)乙胺(PME)4种光学活性农药中间体的对映体。考察了不同手性选择剂及其浓度、背景电解质的pH等操作条件对分离的影响。结果表明,在12kV操作电压下、30mmol／Ltris-HCl背景电解质中,用14g／L聚合-β-CD作为手性选择剂,PPA和cis-PA对映体在pH6．0时,PIE和PME对映体分别在pH2．5和pH3．0时可以被较好分离。在优化的分离条件下,用聚合-β-CD作毛细管区带电泳手性选择剂分离PIE对映体的分离度为1．513,成功测定了两种旋光性PIE的对映体过量值。     

手性药物山莨菪碱的毛细管电泳拆分研究

以新型环糊精衍生物单3-O-苯基胺甲酰基-β-CD为手性选择剂,用毛细管区带电泳法对手性药物山莨菪碱进行了拆分。考察了手性选择剂浓度、缓冲液pH值和浓度及有机溶剂对拆分的影响。结果表明,手性选择剂浓度和缓冲液pH值是影响药物对映体分离的重要因素,有机溶剂亦对分离有很大影响。单3-O-苯基胺甲酰基-β-CD对山莨菪碱的分离度为2．16。     

高效液相色谱手性固定相法直接拆分4种吲哚类衍生物

将纤维素-三(3,5-二甲基苯基氨基甲酸酯)(CDMPC)涂敷于自制的球形氨丙基硅胶上,制备成了纤维素-三(3,5-二甲基苯基氨基甲酸酯)手性固定相(CDMPC-CSP)。利用正相高效液相色谱,在该固定相上对新合成的4种吲哚类衍生物对映体进行了手性拆分。通过选择不同结构和浓度的醇类改性剂,优化了色谱分离条件,同时探讨了醇的结构和浓度对于对映体拆分和保留的影响。结果表明,适合Ⅱ~Ⅳ号样品拆分的醇类改性剂分别为正丁醇、乙醇和乙醇,而适合Ⅰ号样品的醇类改性剂为乙醇和正丙醇组成的混合体系。在优化的各流动相体系下,4种吲哚类衍生物的对映体都得到了很好的分离。在此基础上计算了它们的对映体过量值(e.e.值)。实验结果令人满意,表明高效液相色谱手性固定相法是拆分这类化合物的一种理想方法。     

用于芳香胺和醇NMR对映体检测的松香基膦试剂的合成

以松香为原料通过三步反应高产率合成手性二醇3和手性单醇6,将它们用作手性助剂现场制备有机膦衍生试剂,分别对单官能团手性底物(单胺、单醇)和双官能团底物(双胺、双醇及氨基醇)进行衍生,通过31P NMR测定,其芳基底物非对映体衍生物的膦化学位移差异值(Δδp)在3.08～0.10之间,均能够在测定条件下实现对映体峰的基线分离.用于α-萘乙胺和1,1’-联二萘酚(BINOL)样品对映体过量值测定,相对误差小于±2%.     

加压毛细管电色谱法分离1-甲基-3-苯基丙胺对映体

运用毛细管电色谱(pCEC)模式,以羟丙基-β-环糊精(HP-β-CD)作为手性选择剂,对1-甲基-3-苯基丙胺对映体进行手性分离。1-甲基-3-苯基丙胺对映体在最佳的条件下如:手性选择剂浓度10g/L、流动相配比:V(乙腈)∶V(磷酸盐体系)=60∶40溶液(5mmol/L)、背景电解质pH=7.6、柱温16℃和分离电压10kV达到了基线分离,该方法重现性好、简便、快捷。     

手性高效液相色谱法测定SR-生物丙烯菊酯对映体的光学纯度

 在自制的球形氨丙基硅胶上涂敷纤维素 三 (3,5 二甲基苯基氨基甲酸酯 ) (CDMPC) ,制备了手性固定相(CSP)。用该固定相优化了生物丙烯菊酯对映体的分离条件 ,利用色谱峰面积测定了 3种SR 生物丙烯菊酯对映体的光学纯度。结果表明 ,在CDMPC CSP上用高效液相色谱法 (HPLC)测定SR 生物丙烯菊酯对映体的光学纯度、评价样品的质量优劣是一种非常理想的方法。     

新型环糊精衍生物单6-O-苯基胺甲酰基-β-环糊精的合成及其在手性药物毛细管区带电泳拆分中的应用

合成了新型的环糊精衍生物单6-O-苯基胺甲酰基—β-环糊精，并对合成产物进行了表征。以新型环糊精衍生物为手性选择剂，考察了手性选择剂浓度、缓冲液PH值和浓度及有机溶质对8种手性药物对映体的毛细管电泳分离的影响。结果表明：手性选择剂浓度和缓冲液PH值是影响药物对映体分离的重要因素，有机溶质亦对分离有很大影响。单6-O-苯基胺甲酰基—β-环糊精能使所研究的8种手性药物中的5种达基线分离，3种达部分分离。而在同样条件下．β-环糊精仅能使上述药物中的菜心安达部分分离(及。＝0．67)，这说明我们合成的环糊精衍生物手性拆分能力要强于天然环糊精。我们还就单6-O-苯基胺甲酰基-β-环糊精对手性药物可能的拆分机理进行了探讨。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.