Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Fluorine-Containing Passivation Layer via Surface Chelation for Inorganic Perovskite Solar Cells

Minimizing surface defect is vital to further improve power conversion efficiency (PCE) and stability of inorganic perovskite solar cells (PSCs). Herein, we designed a passivator trifluoroacetamidine (TFA) to suppress CsPbI_3−xBr_x film defects. The amidine group of TFA can strongly chelate onto the perovskite surface to suppress the iodide vacancy, strengthened by additional hydrogen bonds. Moreover, three fluorine atoms allow strong intermolecular connection via intermolecular hydrogen bonds, thus constructing a robust shield against moisture. The TFA-treated PSCs exhibit remarkably suppressed recombination, yielding the record PCEs of 21.35 % and 17.21 % for 0.09 cm² and 1.0 cm² device areas, both of which are the highest for all-inorganic PSCs so far. The device also achieves a PCE of 39.78 % under indoor illumination, the highest for all-inorganic indoor photovoltaic devices. Furthermore, TFA greatly improves device ambient stability by preserving 93 % of the initial PCE after 960 h.     

Antioxidant Grain Passivation for Air‐Stable Tin‐Based Perovskite Solar Cells

Tin‐based perovskites with excellent optoelectronic properties and suitable band gaps are promising candidates for the preparation of efficient lead‐free perovskite solar cells (PSCs). However, it is challenging to prepare highly stable and efficient tin‐based PSCs because Sn²⁺ in perovskites can be easily oxidized to Sn⁴⁺ upon air exposure. Here we report the fabrication of air‐stable FASnI₃ solar cells by introducing hydroxybenzene sulfonic acid or its salt as an antioxidant additive into the perovskite precursor solution along with excess SnCl₂. The interaction between the sulfonate group and the Sn²⁺ ion enables the in situ encapsulation of the perovskite grains with a SnCl₂–additive complex layer, which results in greatly enhanced oxidation stability of the perovskite film. The corresponding PSCs are able to maintain 80 % of the efficiency over 500 h upon air exposure without encapsulation, which is over ten times longer than the best result reported previously. Our results suggest a possible strategy for the future design of efficient and stable tin‐based PSCs.     

All‐Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Recently, lead halide‐based perovskites have become one of the hottest topics in photovoltaic research because of their excellent optoelectronic properties. Among them, organic‐inorganic hybrid perovskite solar cells (PSCs) have made very rapid progress with their power conversion efficiency (PCE) now at 23.7 %. However, the intrinsically unstable nature of these materials, particularly to moisture and heat, may be a problem for their long‐term stability. Replacing the fragile organic group with more robust inorganic Cs⁺ cations forms the cesium lead halide system (CsPbX₃, X is halide) as all‐inorganic perovskites which are much more thermally stable and often more stable to other factors. From the first report in 2015 to now, the PCE of CsPbX₃‐based PSCs has abruptly increased from 2.9 % to 17.1 % with much enhanced stability. In this Review, we summarize the field up to now, propose solutions in terms of development bottlenecks, and attempt to boost further research in CsPbX₃ PSCs.     

Observing Defect Passivation of the Grain Boundary with 2-Aminoterephthalic Acid for Efficient and Stable Perovskite Solar Cells

Metal halide perovskite solar cells (PSCs), with their exceptional properties, show promise as photoelectric converters. However, defects in the perovskite layer, particularly at the grain boundaries (GBs), seriously restrict the performance and stability of PSCs. Now, a simple post-treatment procedure involves applying 2-aminoterephthalic acid to the perovskite to produce efficient and stable PSCs. By optimizing the post-treatment conditions, we created a device that achieved a remarkable power conversion efficiency (PCE) of 21.09 % and demonstrated improved stability. This improvement was attributed to the fact that the 2-aminoterephthalic acid acted as a cross-linking agent that inhibited the migration of ions and passivated the trap states at GBs. These findings provide a potential strategy for designing efficient and stable PSCs regarding the aspects of defect passivation and crystal growth.     

Observing Defect Passivation of the Grain Boundary with 2‐Aminoterephthalic Acid for Efficient and Stable Perovskite Solar Cells

Metal halide perovskite solar cells (PSCs), with their exceptional properties, show promise as photoelectric converters. However, defects in the perovskite layer, particularly at the grain boundaries (GBs), seriously restrict the performance and stability of PSCs. Now, a simple post‐treatment procedure involves applying 2‐aminoterephthalic acid to the perovskite to produce efficient and stable PSCs. By optimizing the post‐treatment conditions, we created a device that achieved a remarkable power conversion efficiency (PCE) of 21.09 % and demonstrated improved stability. This improvement was attributed to the fact that the 2‐aminoterephthalic acid acted as a cross‐linking agent that inhibited the migration of ions and passivated the trap states at GBs. These findings provide a potential strategy for designing efficient and stable PSCs regarding the aspects of defect passivation and crystal growth.     

Emerging of Inorganic Hole Transporting Materials For Perovskite Solar Cells

Hole transporting material (HTM) is a significant component to achieve the high performance perovskite solar cells (PSCs). Over the years, inorganic, organic and hybrid (organic‐inorganic) material based HTMs have been developed and investigated successfully. Today, perovskite solar cells achieved the efficiency of 22.1 % with with 2,2’,7,7’‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine) 9,9‐spirobifluorene (spiro‐OMeTAD) as HTM. Nevertheless, synthesis and cost of organic HTMs is a major challenging issue and therefore alternative materials are required. From the past few years, inorganic HTMs showed large improvement in power conversion efficiency (PCE) and stability. Recently CuO_x reached the PCE of 19.0% with better stability. These developments affirms that inorganic HTMs are better alternativesto the organic HTMs for next generation PSCs. In this report, we mainly focussed on the recent advances of inorganic and hybrid HTMs for PSCs and highlighted the efficiency and stability of PSCs improved by changing metal oxides as HTMs. Consequently, we expect that energy levels of these inorganic HTMs matches very well with the valence band of perovskites and improved efficiency helps in future practical deployment of low cost PSCs.     

Understanding the Role of Fluorine Groups in Passivating Defects for Perovskite Solar Cells

Introducing fluorine (F) groups into a passivator plays an important role in enhancing the defect passivation effect for the perovskite film, which is usually attributed to the direct interaction of F and defect states. However, the interaction between electronegative F and electron-rich passivation groups in the same molecule, which may influence the passivation effect, is ignored. We herein report that such interactions can vary the electron cloud distribution around the passivation groups and thus changing their coordination with defect sites. By comparing two fluorinated molecules, heptafluorobutylamine (HFBM) and heptafluorobutyric acid (HFBA), we find that the F/−NH₂ interaction in HFBM is stronger than the F/−COOH one in HFBA, inducing weaker passivation ability of HFBM than HFBA. Accordingly, HFBA-based perovskite solar cells (PSCs) provide an efficiency of 24.70 % with excellent long-term stability. Moreover, the efficiency of a large-area perovskite module (14.0 cm²) based on HFBA reaches 21.13 %. Our work offers an insight into understanding an unaware role of the F group in impacting the passivation effect for the perovskite film.     

Self‐Assembly of Hybrid Oxidant POM@Cu‐BTC for Enhanced Efficiency and Long‐Term Stability of Perovskite Solar Cells

The controllable oxidation of spiro‐OMeTAD and improving the stability of hole‐transport materials (HTMs) layer are crucial for good performance and stability of perovskite solar cells (PSCs). Herein, we report an efficient hybrid polyoxometalate@metal–organic framework (POM@MOF) material, [Cu₂(BTC)_4/3(H₂O)₂]₆[H₃PMo₁₂O₄₀]₂ or POM@Cu‐BTC, for the oxidation of spiro‐OMeTAD with Li‐TFSI and TBP. When POM@Cu‐BTC is introduced to the HTM layer as a dopant, the PSCs achieve a superior fill factor of 0.80 and enhanced power conversion efficiency 21.44 %, as well as improved long‐term stability in an ambient atmosphere without encapsulation. The enhanced performance is attributed to the oxidation activity of POM anions and solid‐state nanoparticles. Therefore, this research presents a facile way by using hybrid porous materials to accelerate oxidation of spiro‐OMeTAD, further improving the efficiency and stability of PSCs.     

Managing Secondary Phase Lead Iodide in Hybrid Perovskites via Surface Reconstruction for High-Performance Perovskite Solar Cells with Robust Environmental Stability

Rationally managing the secondary-phase excess lead iodide (PbI₂) in hybrid perovskite is of significance for pursuing high performance perovskite solar cells (PSCs), while the challenge remains on its conversion to a homogeneous layer that is robust stable against environmental stimuli. We herein demonstrate an effective strategy of surface reconstruction that converts the excess PbI₂ into a gradient lead sulfate-silica bi-layer, which substantially stabilizes the perovskite film and reduces interfacial charge transfer barrier in the PSCs device. The perovskite films with such bi-layer could bear harsh conditions such as soaking in water, light illumination at 70 % relative humidity, and the damp-thermal (85 °C and 30 % humidity) environment. The resulted PSCs deliver a champion efficiency up to 24.09 %, as well as remarkable environmental stability, e.g., retaining 78 % of their initial efficiency after 5500 h of shelf storage, and 82 % after 1000 h of operational stability testing.     

The Role of Dimethylammonium Iodide in CsPbI3 Perovskite Fabrication: Additive or Dopant?

The controllable growth of CsPbI₃ perovskite thin films with desired crystal phase and morphology is crucial for the development of high efficiency inorganic perovskite solar cells (PSCs). The role of dimethylammonium iodide (DMAI) used in CsPbI₃ perovskite fabrication was carefully investigated. We demonstrated that the DMAI is an effective volatile additive to manipulate the crystallization process of CsPbI₃ inorganic perovskite films with different crystal phases and morphologies. The thermogravimetric analysis results indicated that the sublimation of DMAI is sensitive to moisture, and a proper atmosphere is helpful for the DMAI removal. The time‐of‐flight secondary ion mass spectrometry and nuclear magnetic resonance results confirmed that the DMAI additive would not alloy into the crystal lattice of CsPbI₃ perovskite. Moreover, the DMAI residues in CsPbI₃ perovskite can deteriorate the photovoltaic performance and stability. Finally, the PSCs based on phenyltrimethylammonium chloride passivated CsPbI₃ inorganic perovskite achieved a record champion efficiency up to 19.03 %.     

Antioxidant induced bulk passivation for efficient and stable hole transport layer-free carbon electrode perovskite solar cells

Defect passivation is one of the important strategies to improve the efficiency and stability of perovskite solar cells. In this work, 2,6-di‑tert‑butyl‑4-methylphenol (BHT) as antioxidant was introduced into the perovskite precursor solution to improve the quality of the prepared perovskite films, so that these films performed a larger and uniform grain size. Moreover, the −OH functional group in BHT interacts with I⁻, thus reducing the density of defect states and inhibiting the non-radiative recombination. The presence of hydrophobic groups in BHT protects the film from moisture erosion and improves the long-term stability of PSCs devices. The maximum photoelectric conversion efficiency of the constructed ITO/SnO₂/BHT-MAPbI₃/Carbon device is 16.88%, and the unpackaged cell maintains the initial efficiency of 99.3% after 698 h of storage under the environmental condition of 30% humidity. This work provides an efficient approach to improve the performance of printable hole transport layer-free carbon electrode perovskite solar cells.     

Designing a Perylene Diimide/Fullerene Hybrid as Effective Electron Transporting Material in Inverted Perovskite Solar Cells with Enhanced Efficiency and Stability

Electron transport materials (ETM) play an important role in the improvement of efficiency and stability for inverted perovskite solar cells (PSCs). This work reports an efficient ETM, named PDI‐C₆₀, by the combination of perylene diimide (PDI) and fullerene. Compared to the traditional PCBM, this strategy endows PDI‐C₆₀ with slightly shallower energy level and higher electron mobility. As a result, the device based on PDI‐C₆₀ as electron transport layer (ETL) achieves high power conversion efficiency (PCE) of 18.6 %, which is significantly higher than those of the control devices of PCBM (16.6 %) and PDI (13.8 %). The high PCE of the PDI‐C₆₀‐based device can be attributed to the more matching energy level with the perovskite, more efficient charge extraction, transport, and reduced recombination rate. To the best of our knowledge, the PCE of 18.6 % is the highest value in the PSCs using PDI derivatives as ETLs. Moreover, the device with PDI‐C₆₀ as ETL exhibits better device stability due to the stronger hydrophobic properties of PDI‐C₆₀. The strategy using the PDI/fullerene hybrid provides insights for future molecular design of the efficient ETM for the inverted PSCs.     

Ether‐Soluble Cu53 Nanoclusters as an Effective Precursor of High‐Quality CuI Films for Optoelectronic Applications

An effective strategy is developed to synthesize high‐nuclearity Cu clusters, [Cu₅₃(RCOO)₁₀(C≡CtBu)₂₀Cl₂H₁₈]⁺ ( Cu₅₃ ), which is the largest Cu^I/Cu⁰ cluster reported to date. Cu powder and Ph₂SiH₂ are employed as the reducing agents in the synthesis. As revealed by single‐crystal diffraction, Cu₅₃ is arranged as a four‐concentric‐shell Cu₃@Cu₁₀Cl₂@Cu₂₀@Cu₂₀ structure, possessing an atomic arrangement of concentric M₁₂ icosahedral and M₂₀ dodecahedral shells which popularly occurs in Au/Ag nanoclusters. Surprisingly, Cu₅₃ can be dissolved in diethyl ether and spin coated to form uniform nanoclusters film on organolead halide perovskite. The cluster film can subsequently be converted into high‐quality CuI film via in situ iodination at room temperature. The as‐fabricated CuI film is an excellent hole‐transport layer for fabricating highly stable CuI‐based perovskite solar cells (PSCs) with 14.3 % of efficiency.     

Hole‐Boosted Cu(Cr,M)O2 Nanocrystals for All‐Inorganic CsPbBr3 Perovskite Solar Cells

The all‐inorganic CsPbBr₃ perovskite solar cell (PSC) is a promising solution to balance the high efficiency and poor stability of state‐of‐the‐art organic–inorganic PSCs. Setting inorganic hole‐transporting layers at the perovskite/electrode interface decreases charge carrier recombination without sacrificing superiority in air. Now, M‐substituted, p‐type inorganic Cu(Cr,M)O₂ (M=Ba²⁺, Ca²⁺, or Ni²⁺) nanocrystals with enhanced hole‐transporting characteristics by increasing interstitial oxygen effectively extract holes from perovskite. The all‐inorganic CsPbBr₃ PSC with a device structure of FTO/c‐TiO₂/m‐TiO₂/CsPbBr₃/Cu(Cr,M)O₂/carbon achieves an efficiency up to 10.18 % and it increases to 10.79 % by doping Sm³⁺ ions into perovskite halide, which is much higher than 7.39 % for the hole‐free device. The unencapsulated Cu(Cr,Ba)O₂‐based PSC presents a remarkable stability in air in either 80 % humidity over 60 days or 80 °C conditions over 40 days or light illumination for 7 days.     

Crystallization Regulation by Self-Assembling Liquid Crystal Template Enables Efficient and Stable Perovskite Solar Cells

It is found that the disordered growth of bottom perovskite film deteriorates the buried interface of perovskite solar cells (PSCs), so developing a new material to modify the buried interface for regulating the crystal growth and defect passivation is an effective approach for improving the photovoltaic performance of PSCs. Here, we developed a new ionic liquid crystal (ILC, 1-Dodecyl-3-methylimidazolium tetrafluoroborate) as both crystal regulator and defect passivator to modify the buried interface of PSCs. The high lattice matching between this ILC and perovskite promotes preferential growth of perovskite film along [001] direction, while the oriented ILC with mesomorphic phase has a strong chemical interaction with perovskite to passivate the interface defect, as a result, the modified buried interface exhibits suppressed defects, improved band alignment, reduced nonradiative recombination losses, and enhanced charge extraction. The ILC-modified PSC delivers a power conversion efficiency of 24.92 % and maintains 94 % of the original value after storage in ambient for 3000 h.     

有机空穴传输材料在钙钛矿太阳电池中的应用

有机-无机杂化钙钛矿太阳电池(PSCs)由于其诸多优点得到广泛关注,而有机固态空穴传输材料(HTMs)代替液体电解质使其得到飞速的发展,提升了电池的效率和稳定性,已经成为PSCs的重要组成部分。目前应用于PSCs的空穴传输材料分为有机空穴传输材料和无机空穴传输材料两大类。无机空穴传输材料的可选择范围较窄,对应器件的光电转换效率相对较低。开发各类能级匹配、空穴迁移率高的有机空穴传输材料是提高器件效率和稳定性的有效手段,成为相关领域的研究热点。本文依据相对分子质量的大小,将应用于PSCs中的有机空穴传输材料分为小分子类和聚合物类空穴传输材料,详细评述了有机空穴传输材料分子结构对PSCs光电转换效率、填充因子、开路电压、短路电流和稳定性的影响,并对其能级、空穴迁移率的高低、添加剂的使用等进行了讨论。最后详细论述了有机空穴传输材料未来的研究重点和发展趋势。     

Ambient Air Temperature Assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells

Inorganic cesium lead halide perovskites, as alternative light absorbers for organic–inorganic hybrid perovskite solar cells, have attracted more and more attention due to their superb thermal stability for photovoltaic applications. However, the humid air instability of CsPbI₂Br perovskite solar cells (PSCs) hinders their further development. The optoelectronic properties of CsPbI₂Br films are closely related to the quality of films, so preparing high-quality perovskite films is crucial for fabricating high-performance PSCs. For the first time, we demonstrate that the regulation of ambient temperature of the dry air in the glovebox is able to control the growth of CsPbI₂Br crystals and further optimize the morphology of CsPbI₂Br film. Through controlling the ambient air temperature assisted crystallization, high-quality CsPbI₂Br films are obtained, with advantages such as larger crystalline grains, negligible crystal boundaries, absence of pinholes, lower defect density, and faster carrier mobility. Accordingly, the PSCs based on as-prepared CsPbI₂Br film achieve a power conversion efficiency of 15.5% (the maximum stabilized power output of 15.02%). Moreover, the optimized CsPbI₂Br films show excellent robustness against moisture and oxygen and maintain the photovoltaic dark phase after 3 h aging in an air atmosphere at room temperature and 35% relative humidity (R.H.). In comparison, the pristine films are completely converted to the yellow phase in 1.5 h.     

Defect mitigation using d-penicillamine for efficient methylammonium-free perovskite solar cells with high operational stability

Trap-dominated non-radiative charge recombination is one of the key factors that limit the performance of perovskite solar cells (PSCs), which was widely studied in methylammonium (MA) containing PSCs. However, there is a need to elucidate the defect chemistry of thermally stable, MA-free, cesium/formamidinium (Cs/FA)-based perovskites. Herein, we show that d-penicillamine (PA), an edible antidote for treating heavy metal ions, not only effectively passivates the iodine vacancies (Pb²⁺ defects) through coordination with the –SH and –COOH groups in PA, but also finely tunes the crystallinity of Cs/FA-based perovskite film. Benefiting from these merits, a reduction of non-radiative recombination and an increase in photoluminescence lifetime have been achieved. As a result, the champion MA-free device exhibits an impressive power conversion efficiency (PCE) of 22.4%, an open-circuit voltage of 1.163 V, a notable fill factor of 82%, and excellent long-term operational stability. Moreover, the defect passivation strategy can be further extended to a mini module (substrate: 4 × 4 cm², active area: 7.2 cm²) as well as a wide-bandgap (∼1.73 eV) Cs/FA perovskite system by delivering PCEs of 16.3% and 20.2%, respectively, demonstrating its universality in defect passivation for efficient PSCs.

Iodine vacancy defects in MA-free perovskite are effectively passivated through the interaction between Pb²⁺ and the functional groups in d-penicillamine, resulting in an impressive efficiency of 22.4% along with excellent operational stability.     

When Aggregation-Induced Emission Meets Perovskites: Efficient Defect-Passivation and Charge-Transfer for Ambient Fabrication of Perovskite Solar Cells

The intrinsic defects in perovskite film can serve as non-radiative recombination center to limit the performance and stability of metal halide perovskite solar cells (PSCs). The additive engineering in perovskite film is always applied to produce high-efficiency PSCs in recent years. Here, a typical donor-acceptor (D−A) structured aggregation-induced emission (AIE) molecule tetraphenylethene-2-dicyano-methylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TPE-TCF) was introduced into perovskite film. The D−A structure of TPE-TCF molecule provided additional charge transfer channels, contributing to transporting electron of TPE-TCF-based device. The cyano (C≡N) of TPE-TCF can interact with the uncoordinated Pb to from a relatively stable intermediate, PbI₂⋅TPE-TCF, resulting in the slower crystal growth, reduced the defects at the grain boundaries and suppressed carrier recombination. As a consequence, the power conversion efficiency (PCE) of TPE-TCF-modified PSCs achieved a remarkably enhanced from 15.63 to 19.66 % with negligible hysteresis, which was prominent in methylammonium lead iodide-based devices fabricated under ambient condition. Furthermore, the PSCs modified by AIE molecule possessed an outstanding stability and maintain about 86 % of the initial PCE after 300 h storage in air at 25–35 °C with a high relative humidity (RH) of ≈85 %. This work suggests that incorporating AIE molecule into perovskite is a promising strategy for facilitating high-performance PSCs commercialization in ambient environment without glovebox.