Reaction of α,β-unsaturated Fischer carbene complexes with allyl alkoxide

Optically enriched homo-binuclear Fischer chromium carbene complexes with planar chiral arene chromium complexes gave α-allyl β-arylpropionates up to 97% ee by reaction with allyl alkoxide and subsequent photo-oxidative demetalation. The chiral hetero-binuclear tungsten carbene complexes afforded anti α-allyl β-hydroxy β-arylpropionates as a major product up to 92/8 dr by the same reaction sequence. High diastereoselectivity in these reactions is contributed to the planar chirality of the arene chromium complex, even though the reaction was carried out under vigorous basic media. The reaction products, α-allyl β-arylpropionates were derived by 1,3-M(CO)₅ shift and subsequent [3,3]-sigmatropic rearrangement. Also, the corresponding chromium-uncomplexed α,β-unsaturated Fischer carbene complexes afforded α-allyl β-arylpropionates under the same conditions. Formation of β-allyl β-arylpropionates via 1,2-M(CO)₅ shift followed by [3,4]-sigmatropic rearrangement was not observed in both reactions of chromium-coordinated and the corresponding chromium-uncoordinated α,β-unsaturated Fischer carbene complexes with allyl alkoxide in the presence of base.     

Stereoselective formal [3 + 2] cycloaddition of N-alkylidene glycine ester anions to chiral Fischer alkenylcarbene complexes. Asymmetric synthesis of 3,4,5-trisubstituted prolines

The reaction between N-alkylidene glycine ester enolates, generated from glycine esters aldimines with LDA in THF at low temperature, and chiral alkoxyalkenylcarbene complexes of chromium provided directly 2,4,5-trisubstituted-3-pyrrolidinylcarbene complexes with total exo selectivity and very high syn and facial diastereoselectivity when carbene complexes bearing the (-)-8-phenylmenthyloxy group were employed. Oxidation of the metal carbene moiety followed by basic hydrolysis of the esters afforded enantiomerically highly enriched syn,exo-3,4,5-trisubstituted prolines, whereas acidic hydrolysis of the same functional groups proceeded with epimerization at the alpha-amino acid center leading to anti,exo-3,4,5-trisubstituted prolines of very high enantiomeric purity as well.     

Synthesis and characterization of biodegradable block copolymers of ϵ-caprolactone and D,L-lactide initiated by potassium poly(ethylene glycol)ate

Poly(D ,L -lactide)–poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone)–poly(D ,L -lactide) block copolymer (PLA–PCL–PEG–PCL–PLA) was prepared by copolymerization of ϵ-caprolactone (ϵ-CL) and D ,L -lactide (D ,L -LA) initiated by potassium poly(ethylene glycol)ate in THF at 25°C. The copolymers with different composition were synthesized by adjusting the mole ratio of reaction mixture. The resulted copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, DSC, and GPC. Efforts to prepare copolymers with the corresponding structure of PCL–PLA–PEG–PLA–PCL and D ,L -lactide/ϵ-caprolactone random copolymers were not successful. © 1997 John Wiley & Sons, Inc.     

Density functional computations of the cyclopropanation of ethene catalyzed by iron (II) carbene complexes Cp(CO)(L)FeCHR,L = CO,PMe3, R = Me,OMe, ph,CO2Me

Density functional theory has been used to study the Fe‐catalyzed cyclopropanation of Fe‐carbene complexes with ethene. All the intermediates and transition states were optimized completely at the B3LYP/6‐31+G(d,p) level. Calculation results confirm that the cyclopropanation of Fe‐carbene complexes with ethene involves the two reaction paths I and II . In the reaction path I , the double bond of ethene attacks directly on the carbene carbon of Fe‐carbene complexes to generate the cyclopropane. In the reaction path II , ethene substitution for PMe₃ or CO in the Fe‐carbene complexes leads to the complexes M2 ; and the attack of one carbon of ethene on the carbene carbon results in the complexes M3 with a Fe? C? C? C four‐membered ring, and then generates the cyclopropane via the elimination reaction. For Fe‐carbene complexes A , C , D , E , and H , the main reaction mode is the reaction path I ; for Fe‐carbene complexes B , F , and G , the main reaction mode is the reaction path II . © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Unprecedented copper(I) bifluoride complexes: synthesis, characterization and reactivity

To be or not to bifluoride: Two synthetic pathways to unprecedented N-heterocyclic carbene copper(I) bifluoride complexes have been developed. Catalytic tests demonstrated that copper(I) bifluorides are very efficient catalysts, which do not require any additional activating agent. The first Cu-catalyzed diastereoselective allylation of (R)-N-tert-butanesulfinyl aldimines was also established. The method enables efficient, simple and general synthesis of enantiomerically enriched homoallylic amines at room temperature in high yields.     

Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling

In this work, three-dimensional (3D) printing system based on fused deposition modeling (FDM) is used for the fabrication of conductive polymer nanocomposites. This technology consists in the additive multilayer deposition of polymeric nanocomposite based on poly(lactic acid) (PLA) and graphene by means of a in house made low-cost commercial bench-top 3D printer. Further, 3D printed PLA/graphene nanocomposites containing 10 wt% graphene in PLA matrix were characterized for their mechanical, electrical and electromagnetic induction shielding properties of the nanocomposite. Furthermore X-ray computed micro-tomography analyses showed that printed samples have good dimensional accuracy and are significantly closer to the predefined design and the results of scanning electron microscopy (SEM) printed samples showed a uniform dispersion of graphene in PLA matrix The proposed material has uniquely advantageous when implemented in 3D printed structures, because incorporation of multifunctional graphene has been shown to substantially improve the properties of the resulting nanocomposite.     

Extrusion foaming of semi-crystalline PLA and PLA/thermoplastic starch blends

Low density open-cell foams were obtained from polylactic acid (PLA) and from blends of PLA with thermoplastic starch (TPS) using CO(2) as a blowing agent. Two unexpected features were found. First, a 2D cavitation process in the fractured cell walls was unveiled. Elliptical cavities with dimensions in the 100-300 nm range were aligned perpendicular to large cell cracks clearly exhibiting 2D crazing prior to macroscopic cell rupture. Secondly, a significant crystallization rate increase associated with the CO(2) foaming of PLA was discovered. While the PLA used in this study crystallized very slowly in isothermal crystallization, the PLA foams exhibited up to 15% crystallinity, providing evidence that CO(2) plasticization and the biaxial stretching upon foam expansion provided conditions that could increase the crystallization rate by several orders of magnitude.     

Three‐dimensional printing of poly(lactic acid) bio‐based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance

The cellulose fiber was extracted from the abandoned crop sugarcane bagasse (SCB) by means of chemical treatment methods. Poly(lactic acid) (PLA) bio‐based composites with SCB were prepared through fused deposition modeling (FDM) 3D‐printing technology, and the morphologies, mechanical properties, crystallization properties, and thermal stability of 3D‐printed composites were investigated. Compared with the neat PLA, the incorporation of SCB into PLA reduces the tensile strength and flexural strength of 3D‐printed samples but increases the flexural modulus. The difference in tensile performance and bending performance is that the tensile strength of 3D‐printed samples is best when the SCB content is 6 wt%, while the flexural modulus continuously decreases as the SCB content increases. Furthermore, the effects of various printing methods on the tensile performance of 3D‐printed samples were explored via modifying G‐code of 3D models. The results indicate that the optimum SCB fiber content is identical for all printing methods except method “vertical.” Due to the fibers and molecular chains are oriented to varying degrees with altering raster angle in 3D‐printed samples, the fully oriented sample printed by method “parallel” has a better tensile strength. Besides, SCB exhibits enough high thermal decomposition temperature to meet requirements for melt extrusion processing of PLA composites, and SCB fiber is capable of promoting the crystallization of PLA.     

3D printed polylactic acid nanocomposite scaffolds for tissue engineering applications

In this study, biodegradable polylactic acid (PLA) and PLA nanocomposite scaffolds reinforced with magnetic and conductive fillers, were processed via fused filament fabrication additive manufacturing and their bioactivity and biodegradation characteristics were examined. Porous 3D architectures with 50% bulk porosity were 3D printed, and their physicochemical properties were evaluated. Thermal analysis confirmed the presence of ~18 wt% of carbon nanostructures (CNF and GNP; nowonwards CNF) and ~37 wt% of magnetic iron oxide (Fe₂O₃) particles in the filaments. The in vitro degradation tests of scaffolds showed porous and fractured struts after 2 and 4 weeks of immersion in DMEM respectively, although a negligible weight loss is observed. Greater extent of degradation is observed in PLA with magnetic fillers followed by PLA with conductive fillers and neat PLA. In vitro bioactivity study of scaffolds indicate enhancement from ~2.9% (PLA) to ~5.32% (PLA/CNF) and ~ 3.12% (PLA/Fe₂O₃). Stiffness calculated from the compression tests showed decrease from ~680 MPa (PLA) to 533 MPa and 425 MPa for PLA/CNF and PLA/Fe₂O₃ respectively. Enhanced bioactivity and faster biodegradation response of PLA nanocomposites with conductive fillers make them a potential candidate for tissue engineering applications such as scaffold bone replacement and regeneration.     

When does carbonylation of carbenes yield ketenes? A theoretical study with implications for synthesis

Quantum-chemical calculations using DFT and ab initio methods have been carried out for 32 carbenes RR'C which comprise different classes of compounds and the associated ketenes RR'C═C═O. The calculated singlet-triplet gaps ΔE(S-T) of the carbenes exhibit a very high correlation with the bond dissociation energies (BDEs) of the ketenes. An energy decomposition analysis of the RR'C-CO bond using the triplet states of the carbene and CO as interacting fragments supports the assignment of ΔE(S-T) as the dominant factor for the BDE but also shows that the specific interactions of the carbene may sometimes compensate for the S/T gap. The trend of the interaction energy ΔE(int) values is mainly determined by the Pauli repulsion between the carbene and CO. The stability of amino-substituted ketenes strongly depends on the destabilizing conjugation between the nitrogen lone-pair orbital and the ketene double bonds. There is a ketene structure of the unsaturated N-heterocyclic carbene parent compound NHC1 with CO as a local energy minimum on the potential-energy surface. However, the compound NHC1-CO is thermodynamically unstable toward dissociation. The saturated homologue NHC2-CO has only a very small bond dissociation energy of D(e) = 3.2 kcal/mol. The [3]ferrocenophane-type compound FeNHC-CO has a BDE of D(e) = 16.0 kcal/mol.     

Synthesis and Stereochemical Aspects of Ethyl 1,1a,2,3,4,5,6,6a‐Octahydro‐4‐octylcyclopropa[f]indene‐1‐carboxylate

A novel approach for the synthesis of carbene adducts 9a / 9b and 10 / 11 is reported. Identification of the geometric and positional isomers of carbene addition was carried out by reversed‐phase HPLC, and the establishment of the structure and configuration of 9a / 9b was performed by means of 2D‐NMR.     

An ESR insight into the thermally activated structural relaxation of the bis(2,4,6-trichlorophenyl)carbene in relation to the molecular mobility of the immediate surroundings

The dark geometrical relaxation of sterically congested diarylcarbenes under matrix conditions was studied by ESR using bis(2,4,6-trichlorophenyl)carbene as a test molecule. The initial decrease of the parameter D has been found to proceed independently from the well-known expansion of the cental carbenic angle. The latter manifested by the reduction of the parameter E appears to be in correlation with the molecular mobility of the immediate surroundings probed by the reorientation of the primarily aligned test carbene. The complicated nature of the geometrical relaxation of the test carbene was interpreted in terms of the competition of the release of the congestion at the carbenic center and the restraints imposed by a matrix cage on any geometrical changes of the guest molecule.     

Enantioselective N‐Heterocyclic Carbene Catalysis via the Dienyl Acyl Azolium

Herein we report the enantioselective N‐heterocyclic carbene catalyzed (4+2) annulation of the dienyl acyl azolium with enolates. The reaction exploits readily accessible acyl fluorides and TMS enol ethers to give a range of highly enantio‐ and diastereo‐enriched cyclohexenes (most >97:3 er and >20:1 dr). The reaction was found to require high nucleophilicity NHC catalysts with mechanistic studies supporting a stepwise 1,6‐addition/β‐lactonization.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures

The sorption of carbon dioxide in poly(lactic acid) (PLA) was studied by quartz crystal microbalance at high pressures. To address the effect of the D isomer present in the polymer on the gas sorption, measurements were performed in PLA with two different L:D contents, 80:20 and 98:2. New data for the solubility of carbon dioxide in PLA 80:20 and PLA 98:2 over a temperature range from 303.2 to 323.2 K and up to 5 MPa are presented. The results obtained were correlated with the dual‐mode sorption model and the Flory‐Huggins equation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1010–1019, 2006     

Influence of graphene nanoscrolls on the crystallization behavior and nano‐mechanical properties of polylactic acid

Graphene nanoscrolls (GNS), one‐dimensional carbon‐based nanomaterials, have been predicted to possess extraordinary characteristics due to their unique open topology with scrolled graphene monolayers. In this study, the conversion of planar 2‐D graphene nanoplatelets (GNPs) to tubular and scrolled 1‐D GNSs is described. The effects of GNS as a nucleating agent to modulate the morphology, crystallization, and nano‐mechanical properties of polylactic acid (PLA) were studied. The nucleating effect of GNS and its unique topological characteristics proves to influence the crystallization of PLA. Fourier transform infrared (FTIR) spectroscopy indicated nonpreferential interactions of PLA chains around GNS due to the bulky and helical PLA macromolecular chains. Superior interfacial interactions and strain in GNS provide better load transfer between GNS and PLA matrices, resulting in higher modulus and hardness. This study is the first detailed analysis to elucidate the role of unique GNS to favorably modulate the properties of a polymer.     

The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing

l ‐lactide monomers were grafted onto cellulose nanofibers (CNFs) via ring‐opening polymerization, forming poly(lactic acid) grafted cellulose nanofibers (PLA‐g‐CNFs). PLA‐g‐CNFs and pristine PLA were then blended in chloroform and dried to prepare a master batch. PLA‐g‐CNFs/PLA composite filaments targeted for 3D printing were produced by compounding the master batch in PLA matrix and melt extrusion. The as‐extruded composite filaments were subsequently thermal annealed in a conventional oven, and their morphological, thermal, and mechanical properties were evaluated. PLA was successfully grafted on the surface of CNFs as demonstrated by elemental analysis, and the concentration of grafted PLA was estimated to be 33 wt %. The grafted PLA were highly crystallized, contributing to the growth of crystalline regions of PLA matrix. The incorporation of PLA‐g‐CNFs improved storage modulus of the composite filaments in both low temperature glassy state and high temperature rubbery state. Postextrusion annealing treatment led to 28 and 63% increases for tensile modulus and strength of the filaments, respectively. Simulated Young's moduli from the Halpin‐Tsai and Krenchel models were found comparable with the experimental values. The formed composite filaments are suitable for use in 3D printing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 847–855     

胆固醇-聚(D,L-乳酸)的制备及软骨细胞相容性研究

依据胆固醇对细胞膜良好的热力学亲和力及可以调节细胞膜磷脂双分子层的结构和动态行为的生理学的特点,采用本体聚合的方法制备了胆固醇-聚(D,L-乳酸),经GPC,1H-NMR分析证明产物分子量与理论分子量有较好的一致性,证明了聚合物的分子量可以通过调节D,L-丙交酯和胆固醇的量来控制.软骨细胞粘附率、增殖率以及3-(4,5-二甲基噻唑)-2,5-二苯基四氮唑溴盐(MTT)细胞活性的观测结果表明相比纯聚乳酸,胆固醇-聚乳酸明显促进了细胞的粘附与生长.通过激光共聚焦显微镜观察细胞形貌结果显示相比胆固醇-聚乳酸表面,纯聚乳酸表面的细胞数量较少且大多团聚没有正常铺展,而胆固醇-聚乳酸表面的软骨细胞则分布均匀,铺展充分.以上结果证明了胆固醇的存在有利于软骨细胞的生长和粘附,预示着胆固醇-聚乳酸在软骨组织工程以及其他相关的生物医疗领域有着广阔的应用前景.     

Thermal and mechanical properties of polylactide toughened with a butyl acrylate-ethyl acrylate-glycidyl methacrylate copolymer

In this work, a specific polylactide (PLA) 4032D was melt-mixed with a new toughener: butyl acrylate (BA), ethyl acrylate (EA) and glycidyl methacrylate (GMA) copolymer (BA-EA-GMA). DMA tests showed that PLA/BA-EA-GMA blends were partially miscible. The degree of crystallinity of PLA increased while the cold crystallization temperature shifted to higher temperatures with increasing BA-EA-GMA content. The SEM micrographs showed that PLA/BA-EA-GMA blends had a good dispersion and this phenomenon was in good agreement with their higher impact strength. The result showed that the adding of BA-EA-GMA has enhanced the flexibility of PLA/BA-EA-GMA blends as compared with pure PLA. The impact strength was changed from 3.4 kJ/m² for pure PLA to 29.6 kJ/m² for 80/20 PLA/BA-EA-GMA blend.     

Smooth C(alkyl)-H bond activation in rhodium complexes comprising abnormal carbene ligands

Rhodation of trimethylene-bridged diimidazolium salts induces the intramolecular activation of an alkane-type C-H bond and yields mono- and dimetallic complexes containing a formally monoanionic C,C,C-tridentate dicarbene ligand bound to each rhodium centre. Mechanistic investigation of the C(alkyl)-H bond activation revealed a significant rate enhancement when the carbene ligands are bound to the rhodium centre via C4 (instantaneous activation) as compared to C2-bound carbene homologues (activation incomplete after 2 days). The slow C-H activation in normal C2-bound carbene complexes allowed intermediates to be isolated and suggests a critical role of acetate in mediating the bond activation process. Computational modelling supported by spectroscopic analyses indicate that halide dissociation as well as formation of the agostic intermediate is substantially favoured with C4-bound carbenes. It is these processes that discriminate the C4- and C2-bound systems rather than the subsequent C-H bond activation, where the computed barriers are very similar in each case. The tridentate dicarbene ligand undergoes selective H/D exchange at the C5 position of the C4-bound carbene exclusively. A mechanism has been proposed for this process, which is based on the electronic separation of the abnormal carbene ligand into a cationic N-C-N amidinium unit and a metalla-allyl type M-C-C fragment.     

Synthesis and Characterization of Chitosan-g-poly- （D, L-lactic acid） Copolymer

Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chitosan, (2) poly (D,L-lactic acid)(PLA) with low molecular weight can be linked to the amino group by coupling activated PLA to trimethylsilyl-chitosan. Two graft copolymers had hydrophilic-hydrophobic character and can be applied as carriers for drug delivery.