首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
基于纳米金探针和基因芯片的DNA检测新方法   总被引:2,自引:0,他引:2  
包华  贾春平  周忠良  金庆辉  赵建龙 《化学学报》2009,67(18):2144-2148
运用荧光纳米金探针和基因芯片杂交建立一种新的DNA检测方法. 荧光纳米金探针表面标记有两种DNA探针: 一种为带有Cy5荧光分子的信号探针BP1, 起信号放大作用; 另一种为与靶DNA一部分互补的检测探针P532, 两种探针比例为5∶1. 当靶DNA存在时, 芯片上捕捉探针(与靶DNA的另一部分互补)通过碱基互补配对结合靶DNA, 将靶DNA固定于芯片上; 荧光纳米金探针通过检测探针与靶DNA及芯片结合, 在芯片上形成“三明治”复合结构, 最后通过检测信号探针上荧光分子的信号强度来确定靶DNA的量. 新方法检测灵敏度高, 可以检测浓度为1 pmol/L的靶DNA, 操作简单, 检测时间短. 通过改进纳米金探针的标记和优化杂交条件, 可进一步提高核酸检测的灵敏度, 这将在核酸检测方面具有重要的应用价值.  相似文献   

2.
将核酸外切酶Ⅲ诱导的双重信号放大技术与MoS2纳米片的荧光猝灭性质结合,构建了一种高灵敏高选择性的DNA检测方法.首先设计两条末端修饰荧光基团的探针核酸(HP1和HP2).由于两条探针核酸具有3'粘性末端,使其不会被核酸外切酶Ⅲ降解,因而被吸附于MoS2纳米片而猝灭其荧光.当目标DNA存在时,会促使核酸外切酶Ⅲ启动双重信号放大反应,并将探针核酸降解成大量的不能吸附于MoS2纳米片表面的荧光碎片.在优化条件下,目标DNA浓度在0.5~6.0 pmol/L范围内与荧光信号变化呈良好的线性关系,检出限为0.28 pmol/L.与单重信号放大技术相比,本方法极大改善了分析灵敏度和检出限,且具有良好的单碱基错配区分能力.  相似文献   

3.
采用水相法合成的CdTe半导体纳米粒子作为能量给体, 通过Schiff碱反应将单链DNA连接到表面. 采用柠檬酸钠还原氯金酸法制取的Au纳米粒子作为能量受体, 通过Au—S键将单链DNA连接到表面. 通过DNA链间的杂交, 构建了荧光共振能量转移体系(FRET). 测定了CdTe-DNA、 探针体系和探针体系+目标DNA的荧光强度. 结果表明, 探针体系的荧光强度最弱, 加入目标DNA后, 体系荧光增强, 表明该体系的构建是成功的.  相似文献   

4.
吕菊波  张亚会  刘刚  徐慧 《化学通报》2018,81(1):59-64,76
本文提出了一种基于磁性辅助的杂交链反应放大检测三磷酸腺苷(ATP)的传感策略。磁性纳米粒子表面易于修饰,而且操作方便,具有很好的分离效果,能够提高生物传感的选择性。首先,利用生物素与链霉亲和素之间的亲和力作用,将生物素标记的ATP核酸适配体连接到链霉亲和素修饰的磁性纳米粒子表面,加入与ATP核酸适配体互补的一段DNA进行杂交,通过磁性分离除去未杂交上的DNA,加入靶向ATP,ATP与其适配体特异性结合将适配体的互补链通过磁性分离出来,磁性分离出的信号DNA继续用于下一步的杂交链反应,将信号放大,最后利用氧化石墨烯(GO)对荧光的猝灭效应降低背景荧光,达到高灵敏度、高选择性检测靶向ATP。其中,ATP的最低检测浓度为0.1nmol/L。  相似文献   

5.
金属纳米颗粒经常被用作纳米猝灭剂构建高效荧光传感平台.在本工作中,以FAM标记的DNA为模板,通过还原Ag+制备得到银纳米颗粒(AgNPs).由于AgNPs与DNA间稳固的结合,模板合成AgNPs呈现出很高的猝灭效率并可用作超猝灭剂以构建生物荧光传感平台.作为一种尝试,模板合成的DNA-AgNPs复合物被用作生物硫醇荧光检测.通过形成S-Ag键,硫醇与AgNPs发生作用并将FAM标记DNA从AgNPs表面取代下来,FAM荧光恢复.由于低的荧光背景信号,该传感器具有高信背比.此外,DNA-AgNPs复合物呈现出很好的稳定性,可应用于复杂的实际样品.为验证其在实际样品中检测生物硫醇的可行性,测定了人类尿样中的硫醇含量,其结果显示人类尿样中的硫醇总含量为229μM到302μM.为验证结果的可靠性,少量Cys被额外加入到尿样中,其回收率经测定为98%~103%.  相似文献   

6.
基于目标物诱导DNA杂交链式反应(HCR)及银纳米颗粒(Ag NPs)自组装过程构建了无标记型电化学生物传感平台,并将其应用于癌胚抗原(CEA)的检测.在目标物存在的情况下,适配体对CEA进行特异性识别并结合,释放出与之互补的触发DNA链(t DNA).该t DNA能够被金电极上的捕获探针(c DNA)捕获,并启动HCR过程,使得两条发夹DNA链被相继打开并串联成长的DNA双链结构,带正电的Ag NPs通过与该DNA结构之间的静电作用大量自组装到电极表面,并产生强的电化学信号.在优化的实验条件下,该电化学生物传感平台能够在0.5 ng·L~(-1)到50μg·L~(-1)的浓度范围内实现对CEA的良好响应.  相似文献   

7.
以氧化石墨烯(GO)作为DNA载体和荧光猝灭剂,SYBR GreenⅠ(SGⅠ)为荧光信号探针,发夹核酸探针为分子识别探针,基于目标物启动的发夹核酸探针链置换循环反应,建立了一种利用荧光共振能量转移和链置换循环放大技术检测端粒酶RNA(h TR)的荧光新方法.发夹核酸探针hp DNA1和hp DNA2吸附在GO表面,嵌插在发夹DNA探针茎部的SGⅠ的荧光信号被GO猝灭.当人工合成的目标物(T1)存在时,T1与hp DNA1杂交打开hp DNA1的茎-环结构而引发hp DNA2与T1之间的链置换循环反应,由此累积产生大量的hp DNA1/hp DNA2杂交双链.刚性的双链DNA脱离GO表面,导致所嵌插的SGⅠ产生较强的荧光信号.基于荧光信号的变化,可定量检测0.2~50 nmol/L的T1,检出限为90 pmol/L.该方法为端粒酶RNA检测提供了一种高灵敏、高特异性且无需标记的荧光新途径.  相似文献   

8.
本文构建了一种基于纳米粒子、茎环DNA和丝网印刷电极(SPCE)的电化学生物传感技术用于乳腺癌基因的快速、灵敏检测。该传感技术中,探针DNA的两端分别标记了巯基和生物素,巯基用于与金纳米粒子(AuNPs)作用,生物素用于与磁性纳米颗粒(MNPs)表面修饰的链酶亲和素作用以达到富集的目的,之后利用SPCE进行电化学检测。无目标DNA存在时,双标记DNA保持茎环结构,使得生物素分子很难和MNPs上的亲和素接触。一旦加入目标DNA,茎环结构打开,生物素得以与MNPs上的链霉亲和素发生特异性结合,形成的复合物(MNPs-DNA-AuNPs)通过磁性富集到SPCE表面,从而获得AuNPs的电化学信号。该DNA电化学生物传感对单碱基错配有良好的分辨能力,完全互补DNA的检出限为8.0×10-13 mol/L。  相似文献   

9.
建立了一种利用碱基堆积原理并以上转换纳米粒子荧光作为内参的精准检测DNA的方法。该方法首先利用热分解法制备NaYF_4∶Yb,Er上转换荧光纳米颗粒(upconversion nanoparticles,UCNPs),再通过表面羧基化变性牛血清蛋白修饰后与氨基化探针核酸单链共价偶联,形成上转换荧光标记显示探针。最后再基于碱基堆积原理进行杂交检测。研究结果表明以NaYF_4∶Yb,Er荧光强度为内参,根据FAM/UCNP的强度比来定量检测目标DNA浓度比单一的以报告DNA中FAM荧光强度定量检测目标DNA浓度要更为精准,有效地避免了实验中出现的人为操作和仪器误差。本方法不需要进行扩增,检测底限可达到5 nmol·L~(-1),且在较大的浓度范围内有较好的线性关系,同时该方法也有着良好的特异性,能有效区分单碱基错配序列。  相似文献   

10.
合成了由金纳米球和二氧化锰薄片组成的金@二氧化锰纳米片超级纳米粒子(AMNS-SPs), 将其作为探针, 利用比色和单颗粒光谱2种分析方法进行了谷胱甘肽的传感检测. 该传感检测基于选择性刻蚀探针AMNS-SPs中的二氧化锰纳米片, 使得该探针的局域表面等离子共振波长蓝移. 实验结果表明, 比色法和单颗粒光谱法检测谷胱甘肽的检出限分别为0.018 μmol/L和23.2 fmol/L, 且后者是目前检测谷胱甘肽灵敏度最高的传感方法之一. 该传感方法的优异性能主要源于非常薄的二氧化锰纳米片.  相似文献   

11.
Li H  Sun X 《Analytica chimica acta》2011,702(1):109-113
In this paper, we report on the use of 3,4,9,10-perylenetetracarboxylic diimide microfibers (PDIMs) as an effective fluorescent sensing platform for DNA detection for the first time. This sensing system exhibits a detection limit as low as 15 nmol L−1 and has a high selectivity down to single-base mismatch. The general concept used in this approach is based on adsorption of fluorescently labeled single-stranded DNA (ssDNA) probe by PDIM due to the strong π–π stacking between unpaired DNA bases and PDIM. As a result, the fluorophore is brought into close proximity of PDIM, leading to substantial fluorescence quenching. In the presence of the target, the specific hybridization of the probe with its complementary DNA sequence generates a double stranded DNA (dsDNA) which detaches from PDIM, leading to fluorescence recovery. Its generality of this sensing platform for protein detection is also demonstrated.  相似文献   

12.
Enzymes containing 3'→5' exonuclease activities play an important role in various key cellular and physiological processes. The development of fluorescence biosensor is an efficient method to detecting enzyme activity. Herein, a fluorescence resonance energy transfer(FRET) "on" and "off" strategy for detecting exonuclease III(Exo III) activity has been developed. We report here that the double-stranded DNA(dsDNA) enables to bind tightly to self-assembled nanosheets of cationic perylene monoimide derivative(PMI-O7) through electrostatic interaction, and the 6-carboxyfluorescein(FAM)-modified dsDNA could be efficiently quenched via FRET between FAM and PMI-O7. Upon the addition of Exo III, the dsDNA will be digested and the FAM fluorophore will be released, resulting in the fluorescence recovery of FAM. This method provides a simple and sensitive biosensor platform with a low detection limit of 0.077 U/mL for Exo III. Importantly, this method exhibits similar and calibration curves for the detection of Exo III in both buffer and fetal bovine serum samples, indicating that this platform has potential to detect Exo III activity in complex samples.  相似文献   

13.
Here we report on an ultra-sensitive colorimetric sensing platform that takes advantage of both the strong amplification power of rolling circle amplification (RCA) and the high efficiency of a simple urease-mediated litmus test. The presence of a target triggers the RCA reaction, and urease-labelled DNA can hybridize to the biotinylated RCA products and be immobilized onto streptavidin-coated magnetic beads. The urease-laden beads are then used to hydrolyze urea, leading to an increase in pH that can be detected by a simple litmus test. We show this sensing platform can be easily integrated with aptamers for sensing diverse targets via the detection of human thrombin and platelet-derived growth factor (PDGF) utilizing structure-switching aptamers as well as SARS-CoV-2 in human saliva using a spike-binding trimeric DNA aptamer. Furthermore, we demonstrate that this colorimetric sensing platform can be integrated into a simple paper-based device for sensing applications.  相似文献   

14.
Proteases play a central role in several widespread diseases. Thus, there is a great need for the fast and sensitive detection of various proteolytic enzymes. Herein, we have developed a carbon nanotube (CNT)‐based protease biosensing platform that uses peptides as a fluorescence probe for the first time. Single‐walled carbon nanohorns (SWCNHs) and thrombin were used to demonstrate this detection strategy. SWCNHs can adsorb a fluorescein‐based dye (FAM)‐labeled peptide (FAM‐pep) and quench the fluorescence of FAM. In contrast, thrombin can cleave FAM‐pep on SWCNHs and recover the fluorescence of FAM, which allows the sensitive detection of thrombin. This biosensor has a high sensitivity and selectivity toward thrombin, with a detection limit of 100 pM .  相似文献   

15.
Using the remarkable difference in the affinity of graphene oxide (GO) with double strand DNA (dsDNA) and short DNA fragments, we report for the first time a GO-based nonrestriction nuclease responsive system. Our system was composed of GO and a fluorescent dye fluorescein amidite (FAM)-labeled dsDNA substrate (F-dsDNA). At first, the fluorescence of this F-dsDNA substrate was quenched upon addition of GO. When nuclease was added to the mixture of dsDNA and GO, hydrolysis of dsDNA was initiated and small DNA fragments were produced. As a result, the short FAM-linked DNA fragments were released from GO due to the weak affinity of GO with short DNA fragments, and the fluorescence got a restoration. At present, many sensing systems are based on the fact that GO prefers to bind long single strand DNA (ssDNA) over dsDNA or short ssDNA. As for our system, GO has a prior binding with dsDNA over short DNA fragments. Compared with previous methods, this assay platform has some advantages. First, since GO can be prepared in large quantities from graphite available at very low cost, this method shows advantages of simplicity and cost efficiency. Besides, the proposed GO-based nuclease assay provides high sensitivity due to the super quenching capacity of GO. Using deoxyribonuclease I (DNase I) as a model system, DNase I activity can be quantitatively analyzed by the velocity of the enzymatic reaction, and 1.75 U mL−1 DNase I can be significantly detected. Moreover, the fluorescent intensity with various concentrations of nuclease becomes highly discriminating after 3–8 min. Thus, it is possible to detect nuclease activity within 3–8 min, which demonstrates another advantage of quick response of the present system. Finally, use of dsDNA as substrate, our method can achieve real-time nuclease activity/inhibition assay, which is time-saving and effortless.  相似文献   

16.
Metal-organic frameworks (MOFs) have emerged as very fascinating functional materials due to their tunable nature and diverse applications. In this work, we prepared a magnetic porous carbon (MPC) nanocomposite by employing iron-containing MOFs (MIL-88A) as precursors through a one-pot thermolysis method. It was found that the MPC can absorb selectively single-stranded DNA (ssDNA) probe to form MPC/ssDNA complex and subsequently quench the labelled fluorescent dye of the ssDNA probe, which is resulted from the synergetic effect of magnetic nanoparticles and carbon matrix. Upon the addition of complementary target DNA, however, the absorbed ssDNA probe could be released from MPC surface by forming double-stranded DNA with target DNA, and accompanied by the recovery of the fluorescence of ssDNA probe. Based on these findings, a sensing platform with low background signal for DNA fluorescent detection was developed. The proposed sensing platform exhibits high sensitivity with detection limit of 1 nM and excellent selectivity to specific target DNA, even single-base mismatched nucleotide can be distinguished. We envision that the presented study would provide a new perspective on the potential applications of MOF-derived nanocomposites in biomedical fields.  相似文献   

17.
Li H  Zhai J  Sun X 《The Analyst》2011,136(10):2040-2043
In this Communication, we report water-soluble nano-C(60) in the first use as an effective fluorescent sensing platform for the highly sensitive and selective detection of Ag(+). The general concept used in this approach is based on a fluorescently labeled single-stranded DNA (ssDNA) probe that adsorbs on nano-C(60), leading to substantial dye fluorescence quenching; however, in the presence of Ag(+), C-Ag(+)-C coordination induces the probe to fold into a hairpin structure, which does not adsorb on nano-C(60) and thus retains the dye fluorescence. This sensing system exhibits a detection limit as low as 1 nM and has a high selectivity against other metal ions. Finally and most importantly, we demonstrate its performance in real sample analysis.  相似文献   

18.
Easy‐to‐use platforms for rapid antibody detection are likely to improve molecular diagnostics and immunotherapy monitoring. However, current technologies require multi‐step, time‐consuming procedures that limit their applicability in these fields. Herein, we demonstrate effective molarity‐driven electrochemical DNA‐based detection of target antibodies. We show a highly selective, signal‐on DNA‐based sensor that takes advantage of antibody‐binding‐induced increase of local concentration to detect clinically relevant antibodies in blood serum. The sensing platform is modular, rapid, and versatile and allows the detection of both IgG and IgE antibodies. We also demonstrate the possible use of this strategy for the monitoring of therapeutic monoclonal antibodies in body fluids. Our approach highlights the potential of harnessing effective molarity for the design of electrochemical sensing strategies.  相似文献   

19.
Guo Z  Ren J  Wang J  Wang E 《Talanta》2011,85(5):2517-2521
Ochratoxin A, a toxin produced by Aspergillus ochraceus and Penicillium verrucosum, is one of the most abundant food-contaminating mycotoxins in the world. It has been classified by the International Agency for Research on Cancer (IARC) as a possible human carcinogen. In this paper, a sensitive and selective fluorescent aptasensor for ochratoxin A (OTA) detection was constructed, utilizing single-walled carbon nanotubes (SWNTs) as quencher which can quench the fluorescence of free unfolded toxin-specific aptamer attached with FAM (carboxyfluorescein). Without any coating materials as compared to graphene-oxide based sensor, we obtained the detection limit of our sensing platform based on SWNTs to be 24.1 nM with a linear detection range from 25 nM to 200 nM. This technique responded specifically to OTA without interference from other analogues (N-acetyl-l-phenylalanine, warfarin and OTB). It has also been verified for real sample application by testing 1% beer containing buffer solution spiked with a series of concentration of OTA.  相似文献   

20.
While single‐molecule sensing offers the ultimate detection limit, its throughput is often restricted as sensing events are carried out one at a time in most cases. 2D and 3D DNA origami nanostructures are used as expanded single‐molecule platforms in a new mechanochemical sensing strategy. As a proof of concept, six sensing probes are incorporated in a 7‐tile DNA origami nanoassembly, wherein binding of a target molecule to any of these probes leads to mechanochemical rearrangement of the origami nanostructure, which is monitored in real time by optical tweezers. Using these platforms, 10 pM platelet‐derived growth factor (PDGF) are detected within 10 minutes, while demonstrating multiplex sensing of the PDGF and a target DNA in the same solution. By tapping into the rapid development of versatile DNA origami nanostructures, this mechanochemical platform is anticipated to offer a long sought solution for single‐molecule sensing with improved throughput.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号