三元配合物RE(Et2dtc)3(phen)热化学性质的规律性

在无水乙醇中, 用铜试剂(NaEt₂dtc•3H₂O)和邻菲咯啉(o-phen•H₂O)分别与13种低水合氯化稀土合成了三元固态配合物(其中5种尚未见文献报道), 确定它们的组成可用通式RE(Et₂dtc)₃(phen)表示. IR光谱表明配合物中RE³⁺与3个NaEt₂dtc中的6个硫原子双齿配位, 同时与o-phen中的2个氮原子双齿配位. 用RD496-Ⅲ微量热计测定了298.15 K下13种水合氯化稀土盐及两个配体在无水乙醇中的溶解焓, 两个配体醇溶液的混合焓及13种化合物液相生成反应的焓变, 并通过合理的热化学循环, 求得了标题配合物的固相生成反应焓变; 测定了标题配合物298.15 K的比热容. 用RBC-II精密转动弹热量计测定了标题配合物的恒容燃烧热, 计算了它们的标准摩尔燃烧焓和标准摩尔生成焓. 发现系列配合物RE(Et₂dtc)₃(phen) (RE＝La, Pr, Nd, Sm～Lu)的多项热化学性质, 如低水合氯化稀土盐在无水乙醇中的溶解焓以及配合物的液相生成反应焓变和固相生成反应焓变、常温比热容、标准摩尔燃烧焓和标准摩尔生成焓都与稀土原子序数作图呈现“三分组现象”. 较集中地反映出配合物中RE³⁺与配体间的化学键有一定程度的共价性, 这是由于稀土离子5s²5p⁶轨道对4f电子的不完全屏蔽引起的.     

Excess enthalpies of water+1,4-dioxane at 278.15, 298.15, 318.15 and 338.15 K

The excess molar enthalpies of (1–x)water+x1,4-dioxane have been measured at four different temperatures. All the mixtures showed negative enthalpies in the range of low mole fraction but positive ones in the range of high mole fraction of 1,4-dioxane. Excess enthalpies were increased with increasing temperature except those of at 278.15 K. Partial molar enthalpies have maximum around x=0.13 and minimum around x=0.75. Three different behaviors for the concentration dependence of partial molar enthalpies were observed for all temperature. Theoretical calculations of molecular interactions of three characteristic concentrations were carried out using the molecular orbital method.     

Thermodynamical characteristics of acid-base equilibria in glycyl-glycyl-glycine aqueous solutions at 298 K

The constants and enthalpies of acid dissociation of glycyl-glycyl-glycine peptide in aqueous solutions at 298.15 K and ionic strength values of 0.1, 0.5, and 1.0 M containing NaCl as a background electrolyte, were determined by potentiometry and calorimetry. The standard values of pK ₁^° and pK ₂^° constants, the change of Gibbs energy, enthalpy, and entropy for the dissociation processes were calculated. It was found that the acidic properties of the carboxylic group in aqueous solution subside upon the transition from α-amino acids to peptides due to the lower entropy effect of dissociation. It was concluded that the increase of dissociation constant of a protonated peptide amino group upon an increase in the length of its molecule is determined by entropy factor associated with the attenuation of amino group solvation.     

Features of Formation of Mixed-Ligand Complexes of Aluminum Tetraphenylporphine

Formation of extra complexes of aluminum tetraphenylporphine was studied by spectrophotometric titration. The effect of the nature of acido ligands on the stability of mixed-ligand complexes of aluminum tetraphenylporphine was determined. The stability constant (log K _st) of sterically unstrained complexes (Cl)Al(L)TPP and (OH)Al(L)TPP increases linearly with increasing basicity of the extra ligand (log KBH⁺); in the case of sterically distorted complexes (OAc)Al(L)TPP and (Acac)Al(L)TPP changes in log K _st and log KBH⁺ vary in the same direction. The geometries and energy characteristics of six-coordinate complexes of aluminum porphyrins were calculated quantum-chemically. The calculated enthalpies and Gibbs energies of formation of the complexes are consistent with the experiment. The possibility of the bidentate coordination of acetate and acetylacetonate in the porphyrin extra complexes was proved.     

Synthesis and characterization of the rare-earth complexes with salicylic acid

Seven rare-earth complexes with salicylic acid RE(HSal)₃·nH₂O (HSal = C₇H₅O₃; RE = La-Sm, n = 2; RE = Eu, Gd, n = 1) were synthesized and characterized by elemental analysis, the IR spectrum, and cyclic voltammetry. The constant-volume combustion energies of complexes, Δ_c U, were determined by a precise rotating-bomb calorimeter at 298.15 K. Their standard molar enthalpies of combustion, Δ_c H _m ^o , and standard molar enthalpies of formation, Δ_f H _m ^o , were calculated.     

Thermodynamics of Ni(II) Complexation with L-Asparagine in Aqueous Solution

Complexation of the Ni²⁺ ion with L-asparagine (HAsn^±) is studied by potentiometric titration at 298.15 K and at the 0.3, 0.5 and 1.0 ionic strength of the solution (KNO₃). The formation of the NiAsn⁺ and NiAsn₂ complexes was established and their stability constants were determined. The thermodynamic stability constants of the mono- and bis(L-asparagine)nickel(II) complexes were obtained by extrapolation to zero ionic strength. The direct calorimetry method was used to measure the heat effect of the L-asparagine reaction with the Ni(II) nitrate solution in different pH intervals at 298.15 K and at the 0.5, 1.0, and 1.5 ionic strength (KNO₃). The standard enthalpies of the NiAsn⁺ and NiAsn₂ formation were found using extrapolation and the equation with one individual parameter. The enthalpies of the formation of the Ni(II) complexes with L-asparagine in aqueous solution were calculated in the standard hypothetically undissociated state.     

Excess Enthalpies of Binary Mixtures of Propanediamine+Propanediol at 298.15 K

The molar excess enthalpies of 1,2- and 1,3-propanediamine+1,2- and 1,3-propanediol have been determined at 298.15 K by using a twin-microcalorimeter which requires each component liquid 1 to 1.5 cm³ for a series of runs over the whole range of mole fraction. All excess enthalpies are exothermic and large. An equilibrium constant K₁ expressed in terms of mole fractions and standard enthalpy of formation of 1:1 complex have been evaluated by ideal mixtures of momomeric molecules and their associated complexes. This revised version was published online in August 2006 with corrections to the Cover Date.     

A Thermodynamic Study of Complexation of Iron Ions with Clarithromycin and Roxithromycin in Methanol Using a Conductometric Method

The formation constants K _ML of Clarithromycin (CLA) and Roxithromycin (ROX) with Fe(III) and Fe(II) ions in methanol have been determined at various temperatures using a conductometric technique. The interaction yields complexes with metal-to-ligand compositions of 1:1. The conductivity data were analyzed using a computer program based on 1:1 stoichiometry from which the stability constants and the limiting molar conductance were obtained. The stability of these complexes was found to increase with temperature. Compared with Fe(II), Fe(III) forms more stable complexes with ROX and CLA. The values of the thermodynamic parameters enthalpies (??H ^°), entropies (??S ^°), and the derived Gibbs energies (??G ^°) were deduced from the dependence of the formation constants on temperature. The positive values of ??H ^° and ??S ^° indicate that the complexation processes is enthalpically unfavorable but entropically favored. The negative values of ??G ^° show the ability of the studied ligand to form stable complexes and that the complexation process is favorable.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Laws of complex formation in a series of azo-substituted pyrocatechol derivatives and their tin(II) complexes

Physicochemical properties of new reagents, azo-substituted pyrocatechol derivatives and their tin(II) complexes, are studied. The acid-base properties of the hydroxy groups (pK′_i, pK″_i), parameters of complex formation reactions (pH, temperature, time), and instability constants of the complexes formed (pK _i) are determined. Quantitative correlations between the dissociation constants (pK′_a) of the functional analytical group, and the electronic Hammett constant σ for a substituent (pK′_a-pH₅₀ of the complex formation reaction), as well as between pK′_a and instability constants of the complexes (pK _a), are established. The quantitative correlations established allow the prediction of the physicochemical properties of the reagents and tin(II) complexes with new reagents of this class with the same functional analytical group (FAG) but other substituents.     

Crystal Structure, Lattice Energy, and Standard Molar Enthalpy of Formation of the Complex (C11H18NO)2CuCl4(s)

The complex (C₁₁H₁₈NO)₂CuCl₄ (s), which may be a potential effective drug, was synthesized. X‐ray crystallography, elemental analysis, and chemical analysis were used to characterize the structure and composition of the complex. Lattice energy and ionic radius of the anion of the complex were derived from the crystal data of the title compound. In addition, a reasonable thermochemical cycle was designed, and standard molar enthalpies of dissolution for reactants and products of the synthesis reaction of the complex were measured by an isoperibol solution‐reaction calorimeter. The enthalpy change of the reaction was calculated to be Δ_rH^?_m=(2.69±0.02) kJ·mol^?1 from the data of the above standard molar enthalpies of dissolution. Finally, the standard molar enthalpy of formation of the title compound was determined to be Δ_rH^?_m[(C₁₁ H₁₈NO)₂CuCl₄, s]= ? (1822.96±6.80) kJ·mol^?1 in accordance with Hess law.     

Thermochemical study of 2- and 3-alkyl substituted thiophenes

The standard (p ⁰=0.1 MPa) molar enthalpies of formation, in the condensed phase, of nine linear-alkyl substituted thiophenes, six in position 2- and three in position 3-, at T=298.15 K, were derived from the standard massic energies of combustion, in oxygen, to yield CO₂(g) and H₂SO₄·115H₂O(aq), measured by rotating-bomb combustion calorimetry. The standard molar enthalpies of vaporization of these compounds were measured by high temperature Calvet Microcalorimetry, so their standard molar enthalpies of formation, in the gaseous phase, were derived. The results are discussed in terms of structural contributions to the energetics of the alkyl-substituted thiophenes, and empirical correlations are suggested for the estimation of the standard molar enthalpies of formation, at T=298.15 K, for 2- and 3-alkyl-substituted thiophenes, both in the condensed and in the gaseous phases.     

Molecular energetics of alkyl substituted pyridine <Emphasis Type="Italic">N</Emphasis>-oxides

The standard (p° = 0.1 MPa) energies of combustion in oxygen, at T = 298.15 K, for the solid compounds 2-methylpyridine-N-oxide (2-MePyNO), 3-methylpyridine-N-oxide (3-MePyNO) and 3,5-dimethylpyridine-N-oxide (3,5-DMePyNO) were measured by static-bomb calorimetry, from which the respective standard molar enthalpies of formation in the condensed phase were derived. The standard molar enthalpies of sublimation, at the same temperature, were measured by Calvet microcalorimetry. From the standard molar enthalpy of formation in gaseous phase, the molar dissociation enthalpies of the N–O bonds were derived, and compared with values of the dissociation enthalpies of other N–O bonds available for other pyridine-N-oxide derivatives.     

Effect of Some Solvents on the Radical Polymerization of Methyl Methacrylate Studied by Differential Scanning Calorimetry

The course of the isothermal polymerization of methyl methacrylate in different concentrated solutions in toluene, n-butyl acetate, cyclohexanone, and dimethylformamide was measured at four temperatures by differential scanning calorimetry. The conversions at the sharp increase of the reaction rate were found to increase with dilution of the reaction mixture. The polymerization enthalpies and the composite rate constants were calculated. The polymerization enthalpies seem to be solvent independent. The composite rate constants for polymerization in butyl acetate are lower and those for polymerization in toluene are equal to the constants for bulk polymerization. They are independent of the concentration of the reaction system. The constants for polymerization in cyclohexanone and dimethylformamide are, however, concentration dependent. An interrelation between the composite rate constants and solubility parameters of the solvents and methyl methacrylate was found. The relative molecular weight averages decrease with decreasing concentration of the reaction mixture. The MW distributions were very broad.     

Application of rotate-bomb calorimeter for determining the standard molar enthalpy of formation of Ln(Pdc)3(Phen)

Thirteen solid ternary complexes Ln(Pdc)₃(Phen) (Ln = La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu;) have been synthesized in absolute ethanol by rare-earth element chloride low hydrate reacting with the mixed ligands of ammonium pyrrolidinedithiocarbamate (APdc) and 1,10-phenanthroline · H₂O (o-Phen · H₂O) in the ordinary laboratory atmosphere without any cautions against moisture or air sensitivity. IR spectra of the complexes showed that the Ln³⁺ ion was coordinated with six sulfur atoms of three Pdc⁻ and two nitrogen atoms of o-Phen · H₂O. It was assumed that the coordination number of Ln³⁺ is eight. The constant-volume combustion energies of the complexes, Δ_c U, were determined by a precise rotate-bomb calorimeter at 298.15 K. Their standard molar enthalpies of combustion, Δ_c H _m ^o , and standard molar enthalpies of formation, Δ_f H _m ^o were calculated. The text was submitted by the authors in English.     

Additivity methods for prediction of thermochemical properties. The Laidler method revisited. 2. Hydrocarbons including substituted cyclic compounds

A revised parameterization of the extended Laidler method for predicting standard molar enthalpies of atomization and standard molar enthalpies of formation at T = 298.15 K for several families of hydrocarbons (alkanes, alkenes, alkynes, polyenes, poly-ynes, cycloalkanes, substituted cycloalkanes, cycloalkenes, substituted cycloalkenes, benzene derivatives, and bi and polyphenyls) is presented. Data for a total of 265 gas-phase and 242 liquid-phase compounds were used for the calculation of the parameters. Comparison of the experimental values with those obtained using the additive scheme led to an average absolute difference of 0.73 kJ · mol⁻¹ for the gas-phase standard molar enthalpy of formation and 0.79 kJ · mol⁻¹ for the liquid-phase standard molar enthalpy of formation. The database used to establish the parameters was carefully reviewed by using, whenever possible, the original publications. A worksheet to simplify the calculation of standard molar enthalpies of formation and standard molar enthalpies of atomization at T = 298.15 K based on the extended Laidler parameters defined in this paper is provided as supplementary material.     

298.15 K时斯蒂芬酸钾盐和铯盐在水和DMF中的溶解热

在298.15 K时, 采用微热量热仪测定斯蒂芬酸钾盐[K₂(TNR)(H₂O)]_n和斯蒂芬酸铯盐[Cs₂(TNR)(H₂O)₂]_n两种含能配合物在水和N,N-二甲基甲酰胺(DMF)溶剂中的溶解热, 研究其溶解过程和溶解热化学性质. 结果表明, 两种配合物溶解于水是吸热过程, 而溶解于DMF则为放热过程, 这主要是由于溶质和溶剂的分子结构及其极性不同而导致的. 通过对实验数据计算拟合, 求得这两种配合物的溶解焓(Δ_solH)、相对表观摩尔焓(ФL_i)、相对偏摩尔焓(L_i)及稀释焓(Δ_dilH_1,2)的经验公式和标准溶解焓值(Δ_solH_m^θ).     

Komplexierungseigenschaften von Pyridinokronenethern gegenüber Alkali- und Erdalkaliionen in Methanol

Complexing Properties of Pyridino Crown Ether with Alkali and Alkali-Earth Cations in Methanol The stability constants and thermodynamic values of the complex formation of several pyridino crown ethers with alkali and alkaline-earth cations were determined by calorimetric titration in methanol. The stability of the complexes is lower than with crown ethers. This is mainly caused by a decrease of reaction enthalpies. Compared with other mono substituted crown ethers the complexes with pyridino crown ethers are fare more stable due to entropic effects. With increasing cavity size the stability constants, enthalpies and entropies for the reaction of crown ethers and pyridino crown ethers approach similar values.     

Calorimetric investigation of reaction Ca(NO3)2 + Na3PO4 in water and microemulsions saturated with CO2

The reactions of Ca(NO₃)₂ + Na₃PO₄ in water and water/sodium bis(2‐ethylhexyl) sulfosuccinate (AOT)/hydrocarbon microemulsions saturated CO₂ with various molar ratios of water to surfactant R, oil phases, and surfactant concentrations were investigated by isothermal titration calorimetry. The product of the reaction was confirmed to be sodium‐and‐carbonate‐substituted hydroxyapatite (NaCO₃HAP) by Fourier transform infrared spectra (FTIR), energy dispersive spectrometry (EDS), and X‐ray diffraction (XRD). From calorimetric measurements, the molar enthalpies of solution of water in the AOT/n‐dodecane system, and the molar enthalpies, the rate constants, and the activation energies of the reactions were determined. It was found that the enthalpy of solution of water in AOT/n‐dodecane micells and the molar enthalpy of the reaction in the microemulsions increased with the decreases of R until R = 7; below that they kept almost constant. It may be attributed to the increase of the ratio of the bound water to the free water with the decrease of R until there was no free water when R < 7. However, the reaction rate constant k₁ was affected by the ionic strength of the medium and log k₁ showed a linear dependence on 1/R in the whole range of R we investigated. It was also observed that the rate constant and the enthalpy of the reaction remained almost unchanged when the surfactant concentration and the nature of oil phase varied. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 322–330, 2011