Stereoselective Synthesis of cis‐1‐Aryl‐2‐benzoyl‐3,3‐dicyanocyclopropanes in Water

The highly stereoselective preparation of cis‐1‐aryl‐2‐benzoyl‐3,3‐dicyanocyclopropanes with arsonium salt and olefin in water is described. It is simple, efficient, and environmentally benign.     

Palladium‐Catalyzed Enyne Cyclization of 2′‐Alkenyl 2‐Alkynoates in Imidazolium‐Type Ionic Liquids

The use of [bmim][BF₄], [bmim][PF₆], and [bmim][Cl] ILs as the solvents in Pd(II)‐catalyzed enyne cyclization of 2′‐alkenyl 2‐alkynoates in the presence of cupric chloride has been investigated. The Z/E stereoselectivity of the reaction could range from 90:10 to 4:96 by tuning the amount of LiCl in ILs. After the separation of the product, the IL–catalyst mixture could be recovered by treatment with hydrochloric acid and recycled several times without an obvious loss of catalytic activity.     

One‐Pot Synthesis of 2‐Acylimino‐3‐aryl‐thiazoline Derivatives in Aqueous Media

A one‐pot, two‐step synthesis for acyliminothiazolines by treated N,N′‐substituted thioureas with α‐bromocarbonyl compounds under aqueous media was described. Compared to the classical reaction in organic solvents, this method consistently has the advantage of short reaction times, convenient procedures, and mild reaction conditions.     

Utility of 1‐Chloro‐3,4‐dihydronaphthalene‐2‐carboxaldehyde in the Synthesis of Novel Heterocycles with Pharmaceutical Interest

Ethyl α‐cyano‐β‐(1‐chloro‐3,4‐dihydronaphthalene‐2‐yl) acrylate (2) was prepared by the Knoevenagel condensation of 1 with ethyl cyanoacetate. Compound 2 was used as the key intermediate to prepare Schiff bases (3a, b), benzo[c]acridine (4), naphthyl thiopyrimidine (5), and pyrazolo[2,3‐a]‐benzo[h]quinazoline (6) derivatives through its reaction with hydrazines, p‐ansidine, thiourea, and 3,5‐diamino‐4‐phenylazopyrazole, respectively. Base‐catalyzed cyclocondensation of 1 with hippuric acid gives oxazolone derivative (7). Reaction of compound 7 with aniline gave imidazolone derivative (9). Treatment of compound 1 with different types of diaminopyrazoles gave 6,7‐dihydro‐pyrazolo[2,3‐a]‐benzo[h]quinazoline (10–13) derivatives. The multicomponent reaction of compound 1 with pyrazolone and malononitrile in the presence of ammonium acetate furnished pyrazolo[3,4‐b]‐benzo[h]quinoline (14) while in the presence of piperidine afforded benzo[h]chromeno[2,3‐c]pyrazole derivative 15.     

RAFT Polymerization of Styrene in the Presence of 2‐Nonyl‐benzoimidazole‐1‐carbodithioic Acid Benzyl Ester

A novel dithiocarbamate, 2‐nonyl‐benzoimidazole‐1‐carbodithioic acid benzyl ester ( 1a ), was synthesized and successfully used in RAFT polymerization of styrene in bulk with thermal initiation. The effect of molar ratio of styrene to RAFT agent on the polymerization was investigated. The linear relationship between ln([M]₀/[M]) and polymerization time indicated that the polymerization was first‐order with respect to monomer concentration. The molecular weights increased linearly with monomer conversion and were close to corresponding theoretical values. The molecular weight distributions (M _w /M _n ) kept very narrow (M _w /M _n <1.1) at a wide range of conversions of 14.2% to 73.3%. The obtained polymer had a strong ultraviolet absorption at 329 nm, which indicated that the 1a moiety remained at the end of polymer chain.     

Stabilization of Water‐Soluble Antioxidant in Water‐in‐Oil‐in‐Water Double Emulsions

Abstract

In this study, we are introducing a method that can effectively stabilize antioxidants in water‐in‐oil‐in‐water (W/O/W) double emulsions. Preliminarily, stable W/O/W double emulsions were produced by manipulating the characteristics of internal aqueous phase via two‐stage emulsification, resulting consequently in the formation of fine internal water droplets in the dispersed oil droplets. From conductivity measurements that can determine the elution amount of internal aqueous phase, it was confirmed that the double emulsion stability could be improved by treating the internal aqueous phase with a hydroxypropyl‐beta‐cyclodextrin. In this study, kojic acid, 5‐hydroxy‐2‐(hydroxymethyl)‐4‐pyrone was selected as a model antioxidant. The stabilization of kojic acid was attempted by locating it in the internal water droplets of the stable W/O/W double emulsions. The stability of kojic acid in the double emulsion system could be maintained at 90% for 10 weeks at high temperature. We believe that these stable W/O/W double emulsions could be used meaningfully as a carrier for many unstable antioxidants.     

Spectrophotometric Determination of Gold in Water and Ore with 2‐Carboxyl‐1‐Naphthalthiorhodanine

Abstract

This paper reports on the synthesis of a new chromogenic reagent, 2‐carboxyl‐1‐naphthalthiorhodanine (CNTR). A high sensitive, selective, and rapid method for the determination of gold based on the rapid reaction of gold with CNTR and the solid phase extraction of the colored chelate with a reversed phase polymer‐based C₁₈ cartridge was developed. In the presence of 0.05–0.5 mol L^?1 of phosphoric acid solution and emulsifier‐OP medium, CNTR reacts with gold to form a red chelate of a molar ratio 1∶3 (gold to CNTR). This chelate was enriched by the solid phase extraction with a polymer‐based C₁₈ cartridge and the retained chelate was eluted from the cartridge with dimethyl formamide (DMF). The enrichment factor of 100 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.35×10⁵ L · mol^?1 · cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01～2 µg mL^?1 in the measured solution. The relative standard deviation for 11 replicates sample of 0.5 µg L^?1 level is 2.05%. The detection limit, based on three times the standard deviation is 0.02 µg L^?1 in the original sample. This method was applied to the determination of gold in water and ore with good results.     

Synthesis of Methyl 2‐Methylazulene‐3‐carboxylate in the Presence of Molecular Sieves and Reaction with N‐Bromosuccinimide

The preparation of methyl 2‐methylazulene‐1‐carboxylate (1) was carried out in the presence of molecular sieves to obtain a good yield. The product was subjected to bromination under different reaction conditions to obtain methyl 1‐bromo‐2‐methylazulene‐1‐carboxylate (2) and methyl 1‐bromo‐2‐(bromomethyl) azulene‐1‐carboxylate (3).     

Effect of Substitution in Stannic Chloride–Mediated Heterocyclization of 4‐Allyl‐3‐hydroxyquinolin‐2(1H)‐ones

Effect of substituents at the allylic position in a stannic chloride–iodine–mediated heterocyclization of 4‐allyl‐3‐hydroxyquinolin‐2(1H)‐ones for the regioselective formation of five‐ and six‐membered heterocyclic rings has been rationalized by the application of restricted Hatree–Fock calculation.     

One‐Pot Synthesis of 2‐Arylthio‐2‐cyclohexenone Derivatives by the Diels–Alder Reaction of 4‐Arylthio‐3‐hydroxy‐2‐pyrones

The base‐catalyzed Diels–Alder reactions of 4‐arylthio‐3‐hydroxy‐2‐pyrones are reported. Treatment of 4‐arylthio‐3‐hydroxy‐2‐pyrones and dienophiles with triethylamine gave 2‐arylthio‐2‐cyclohexenone derivatives by the Diels–Alder reaction involving a decarboxylation in excellent to reasonable yields.     

Synthesis of Acylated Methyl 2‐Acetamido‐2‐Deoxy‐α‐D‐Mannopyranosides

Abstract

2‐Acetamido‐2‐deoxy‐β‐D‐mannopyranose (1) was glycosylated by the Fischer method using an acidic ion‐exchange resin as the catalyst to give α‐methyl glycoside 2. Selective pivaloylations of methyl 2‐acetamido‐2‐deoxy‐α‐D‐mannopyranoside (2) have been studied under various reaction conditions. Two partially pivaloylated products were submitted to additional acetylations. All structures were established by NMR spectroscopy. Structure of the methyl 2‐acetamido‐2‐deoxy‐3,6‐di‐O‐pivaloyl‐α‐D‐mannopyranoside (4) was determined by X‐ray analysis.     

Application of Sulfinyl bis(2,4‐dihydroxythiobenzoyl) in the Synthesis of N‐Substituted 2‐Amino‐5‐(2,4‐dihydroxyphenyl)‐1,3,4‐thiadiazoles

One‐stage synthesis of N‐substituted 2‐amino‐5‐(2,4‐dihydroxyphenyl)‐1,3,4‐thiadiazoles is described. The compounds were prepared by the reaction of the sulfinyl bis(2,4‐dihydroxythiobenzoyl) (STB) with 4‐substituted 3‐thiosemicarbazides. STB was obtained from 2,4‐dihydroxybenzenecarbodithioic acid and thionyl dichloride. The structure of compounds was confirmed by IR, ¹H NMR, ¹³C NMR, and EI‐MS data.     

Reaction characteristics of cellulose in the LiCl/1,3‐dimethyl‐2‐imidazolidinone solvent system

In order to elucidate the nature of the LiCl/1,3dimethy2imidazolidinone (DMI) solvent system as one of the homogeneous reaction media of cellulose, cellulose acetate (CA) and Omethylcellulose (MC) were prepared using this solvent system, and the distribution of substituents within anhydroglucose units was examined by ¹³CNMR. It was found that (i) homogeneous cellulose solutions can be easily prepared by heating 2, 5–12 and 100 parts of weight of cellulose, LiCl, and DMI, respectively, and (ii) the relative reactivity of hydroxyl groups is in the order C6 > C2 > C3 for both CA and MC. A remarkable feature of this solvent system is that the reaction efficiency in etherification is very high compared with other homogeneous solvent systems.     

Novel Procedure for Highly Stereoselective Synthesis of Bicyclic Cyclopropane‐lactam with cis‐2‐Aryl‐1‐benzoyl‐3,3‐dicyanocyclopropane and 2‐Cyanomethyl‐1,3‐benzothiazole in Water

The novel procedure for synthesis of cyclopropyl lactams incorporating benzothiazole structure units from cis‐2‐aryl‐1‐benzoyl‐3,3‐dicynocyclopropane and 2‐cyanomethyl‐1,3‐benzothiazole has been achieved. This method is highly stereoselective and environmentally friendly.     

Synthesis of Substituted 2‐Amino‐cyclobutanones

A series of weakly nucleophilic nitrogen derivatives including carbamates, amides, sulfonamides, and anilines were reacted with 1,2‐bis(trimethylsilyloxy)cyclobutene under acidic conditions to afford various substituted 2‐aminocyclobutanone derivatives 3a–i in modest to excellent yields.     

Convenient Method for Synthesis of Substituted 2‐Amino‐2‐chromenes

Some substituted 2‐amino‐2‐chromenes were synthesized by the reaction of arylidenemalononitriles with 1‐naphthol or 2‐naphthol in the presence of sodium hydroxide as catalyst under solvent‐free condition.     

An Efficient Synthesis of Derivatives of 2‐Acetamido‐4‐amino‐2,4,6‐trideoxy‐D‐galactopyranose

Abstract

Methyl 2‐acetamido‐4‐amino‐2,4,6‐trideoxy‐α‐D‐galactopyranoside (10) was synthesized from D‐glucosamine hydrochloride in eight steps in an overall yield of 31%. Key steps include the selective benzoylation at O‐3 of methyl 2‐acetamido‐2,6‐dideoxy‐α‐D‐glucopyranoside in 89% yield and the subsequent Mitsunobu reaction using diphenylphosphoryl azide as the azide source which proceeded in 92% yield. Di‐ and mono‐benzyloxycarbonyl derivatives of 10 were also prepared.     

Spectrophotometric Determination of Nitrite in Water Samples with 4‐(1‐Methyl‐1‐Mesitylcyclobutane‐3‐yl)‐2‐Aminothiazole

Abstract

A simple, sensitive, and specific spectrophotometric method for the measurement of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. The azo dye, 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐(p‐N,N‐dimethylazobenzene)‐1,3‐thiazole was synthesized with the reaction of 4‐(1‐methyl‐1‐mesitylcylobutane‐3‐yl)‐2‐aminothiazole and N,N‐dimethyl aniline in acidic medium. Obtained azo dye has been characterized by infrared (IR), ¹H nuclear magnetic resonance (NMR), and microanalysis methods. The dye shows an absorption maximum at 482 nm. The method is optimized for acid concentration, pH, amount of reagents required, time, and interfering species. All the determinations were carried out at this wavelength throughout the work. At an analytical wavelength of 482 nm, Beer's law is obeyed over the concentration range 0.05 to 2.00 µg nitrite per mL analyte. The molar absorptivity, Sandell's sensitivity, and relative standard deviation are 2.03×10⁴ L mol^?1 cm^?1±251.3 (95%), 2.28×10^?3 µg cm^?2, and 2.74% (n=10), respectively. The detection limit of the method is 0.012 µg ml^?1 of nitrite ion. The method was succesfully applied to the determination of nitrite in tap water and lake water.     

Novel Copolymers of N‐(4‐Bromophenyl)‐2‐Methacrylamide with 2‐Acrylamido‐2‐Methyl‐1‐Propanesulfonic Acid

The new acrylamide monomer, N‐(4‐Bromophenyl)‐2‐methacrylamide (BrPMAAm) has been synthesized by reacting 4‐Bromoaniline with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The radical‐initiated copolymerization of (BrPMAAm), with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) has been carried out in dimethylformamide (DMF) solution at 70±1°C using 2,2′‐azobisisobutyronitrile (AIBN) as an initiator with different monomer‐to‐monomer ratios in the feed. The copolymers were characterized by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy. The copolymer composition was evaluated by nitrogen content (N for AMPS‐units) in polymers led to the determination of reactivity ratios. The monomer reactivity ratios for BrPMAAm (M₁)‐AMPS (M₂) pair were computed using the Fineman‐Ross (F‐R), Kelen‐Tüdös (KT) and Extended Kelen‐Tüdös (EKT) methods. These parameters were also estimated using a non‐linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The mean sequence lengths determination indicated that the copolymer was statistically in nature. By TGA and DSC analyses, the thermal properties of the polymers have been studied. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.