Synthesis and reactivity of 3-(2-chloroalkyl)-2,2-dihaloaziridines

3-(2-Chloroalkyl)-2,2-dihaloaziridines were synthesized via cycloaddition of dihalocarbenes to the CN double bond of β-chloroimines. Under the action of Lewis acids or HCl, N-C³ bond cleavage occurred, giving rise to N-substituted 2,4-dichloro-3,3-dimethylbutanamides, which were further converted to 3-chloropyrrolidin-2-ones under alkaline conditions. When 2,2-dichloro-3-(2-chloro-1,1-dimethylethyl)-1-phenylaziridine was reacted with sodium methoxide, aziridine ring opening with N-C² bond cleavage took place, leading to methyl 4-chloro-3,3-dimethyl-2-(phenylamino)butanoate.     

Dihalocarbene reactions of isobenzofurans

In a search for 1,4-additions of dihalocarbenes, compounds 1, 2, and 4 were reacted with CX₂. Diaryl isobenzofurans (4) yielded substituted 1-aryl-1-(o-benzoyl-phenyl)-2,2-dihaloethenes (5) in very fast additions of dichloro-, dibromo-, and diiodocarbenes. Possible intermediates are discussed.     

Hexamethylphosphoramide

Growing interest is being shown in the role of the solvent (particularly polar solvents) in chemical reactions^[1–4]. The most remarkable polar aprotic solvent appears to us to be the hexamethylated triamide of orthophosphoric acid, OP(N(CH₃)₂)₃, which is known as hexamethylphosphoramide or tris(dimethylamino)phosphine oxide. Hexamethylphosphoramide^[5–7] has recently been studied with respect to its solvent properties for gases^[5], for many organic and inorganic salts^[7], and for polymers^[5], as well as its use as a polymerization co-catalyst. However, these aspects are not considered in the present paper, which deals with the physical and chemical properties of hexamethylphosphoramide, and in particular with its use as a reaction medium. Our own work on hexamethylphosphoramide began in 1961, and until then very little work had been done on this compound. Even in a paper published by Parker^[1b] in 1965, very little reference is made to hexamethylphosphoramide.     

A novel approach in dispersive liquid-liquid microextraction based on the use of an auxiliary solvent for adjustment of density: UV-VIS spectrophotometric and graphite furnace atomic absorption spectrometric determination of gold based on ion pair formation

This paper presents a novel approach to dispersive liquid-liquid microextraction (DLLME), based on the use of an auxiliary solvent for the adjustment of density. The procedure utilises a solvent system consisting of a dispersive solvent, an extraction solvent and an auxiliary solvent, which allows for the use of solvents having a density lower than that of water as an extraction solvent while preserving simple phase separation by centrifugation. The suggested approach could be an alternative to procedures described in the literature in recent months and which have been devoted to solving the same problem. The efficiency of the suggested approach is demonstrated through the determination of gold based on the formation of the ion pair [Au(CN)₂]⁻ anion with Astra Phloxine (R) reagent and its extraction using the DLLME procedure with subsequent UV-VIS spectrophotometric and graphite furnace atomic absorption spectrometric detection. The optimum conditions were found to be: pH 3; 0.8 mmol L⁻¹ K₄[Fe(CN)₆]; 0.12 mmol L⁻¹ R; dispersive solvent, methanol; extraction solvent, toluene; auxiliary solvent, tetrachloromethane. The calibration plots were linear in the ranges 0.39-4.7 mg L⁻¹ and 0.5-39.4 μg L⁻¹ for UV-VIS and GFAAS detection, respectively; thus enables the application of the developed method in two ranges differing from one from another by three orders of magnitude. The presented approach can be applied to the development of DLLME procedures for the determination of other compounds extractable by organic solvents with a density lower than that of water.     

Measurement of the Rates of Diffusion of Halomethanes into Polymer Films Using ATR-FTIR Spectroscopy

Polymer-modified attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and FEWS (fibre-optic evanescent wave) spectroscopy have been very successful to date for sensitive detection of organic pollutants in water utilising the mid-infrared (MIR) region of the electromagnetic spectrum (4000-400 cm^?1). This sensing approach involves the use of different polymer films for preconcentration with optimisation of the sensor related to the rate of diffusion of solvent molecules into these polymer films. Compounds such as chloroform, bromoform, bromodichloromethane and dibromochloromethane which are collectively referred to as trihalomethanes (THMs) were analysed in this work. A gaseous phase experimental design was used and from experimental data the rate of diffusion of each of the halomethanes was quantified based on a Fickian type diffusion model. Individual diffusion coefficient values were found to be in the range 3.38 E-10 ± 0.01 E-10 to 4.72 E-08 ± 0.42 E-08 cm² s^?1. Multicomponent effects were observed for mixtures of compounds diffusing into polyisobutylene and ethylene-propylene copolymer.     

Cyclopropanation of vinylidenecyclopropanes. Synthesis of 1-(dihalomethylene)spiropentanes

Synthesis of 1-(dihalomethylene)spiropentanes via cyclopropylidenecyclopropanes generated by cyclopropanation of vinylidenecyclopropanes by dihalocarbenes is described. Reaction of diarylvinylidenecyclopropanes with dibromocarbene and dichlorocarbene exclusively gave 1-(dihalomethylene)spiropentanes in high yields. Reaction of monoarylvinylidenecyclopropanes with dihalocarbenes afforded cyclopropylidenecyclopropanes as the major product with the formation of a small amount of 1-(dihalomethylene)spiropentanes. The efficiency of the thermal rearrangement from the cyclopropylidenecyclopropanes to the 1-(dihalomethylene)spiropentane derivatives depended on the substituents and the reaction temperature. Reaction of diarylvinylidenecyclopropanes with diphenylcarbene and phenylthiocarbene gave the corresponding spiropentane derivatives. This type of thermal rearrangement was applicable to the cyclopropanation of 1,1-diarylallenes.     

<Emphasis Type="Italic">S,S,S</Emphasis>-Tris(2-ethylhexyl) phosphorotrithioate as an effective solvent mediator for a mexiletine-sensitive membrane electrode

S,S,S-Tris(2-ethylhexyl) phosphorotrithioate proved to be an effective solvent mediator for constructing a mexiletine-sensitive membrane electrode in combination with an ion-exchanger, sodium tetrakis[3,5-bis(2-methoxyhexafluoro-2-propyl)phenyl]borate. Among a series of phosphorus compounds containing phosphoryl (P=O) groups, this solvent mediator showed the highest sensitivity to mexiletine in phosphate-buffered physiological saline containing 0.15 mol L⁻¹ NaCl and 0.01 mol L⁻¹ NaH₂PO₄/Na₂HPO₄ (pH 7.4), giving a detection limit of 2 × 10⁻⁶ mol L⁻¹ with a slope of 58.8 mV decade⁻¹. This is the best reported detection limit of any mexiletine-sensitive electrode developed to date. Owing to its high selectivity toward inorganic cations, the electrode was used to determine the level of mexiletine in saliva, the monitoring of which is quite effective for controlling the dose of this drug noninvasively. The mexiletine concentrations determined with the mexiletine-sensitive electrode compared favorably with those determined by high-performance liquid chromatography.     

Polyethylene Glycols as Solvents for Anionic Activation: Synthesis of Thioacetates by Means of Potassium Thioacetate in Polyethylene Glycol 400

Recently, polyethylene glycols (PEGS) of various molecular weights have been proposed as solvent promoters for various reactions ^{1, 2}. We wish to report on the use of PEG 400 as solvent for the anionic activation of potassium thioacetate, which could be used for the preparation of alkyl and benzyl thioacetates from the corresponding halides or alcohol derivatives. The method can be synthetically significant, since from thioacetates the corresponding thiols can be easily prepared under a variety of mild conditions ³.     

A Sustainable Redox‐Flow Battery with an Aluminum‐Based,Deep‐Eutectic‐Solvent Anolyte

Nonaqueous redox‐flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum‐based deep‐eutectic‐solvent is investigated as an anolyte for redox‐flow batteries. The aluminum‐based deep‐eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li⁺/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L⁻¹ and an energy density of 189 Wh L⁻¹ or 165 Wh kg⁻¹ have been achieved when coupled with a I₃⁻/I⁻ catholyte. The prototype cell has also been extended to the use of a Br₂‐based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L⁻¹. The synergy of highly abundant, dendrite‐free, multi‐electron‐reaction aluminum anodes and environmentally benign deep‐eutectic‐solvent anolytes reveals great potential towards cost‐effective, sustainable redox‐flow batteries.     

OH−-induced β-elimination reactions with 1-(2-Xethyl)-4-nitrobenzene substrates in solvent mixture H2O/CH3CN and H2O/DMSO: Reactivity and mechanism

The behaviour of 1-(2-bromoethyl) 4-nitrobenzene (1), N,N,N-triethyl-2-(4-nitrophenyl)ethanaminium bromide (2) and N,N-diethyl-N-[2-(4-nitrophenyl)ethyl]octan-1-aminium bromide (3) in the OH⁻-induced elimination reactions with formation of 1-nitro-4-vinylbenzene in mixtures of DMSO/H₂O or CH₃CN/H₂O has been investigated. With all three substrates an increase in dipolar aprotic solvent content implies a limited increase of the second-order rate constant k _OH up to ≅605, and then an exponential increase is observed. The variation of activation parameters ΔH ^# and dGS ^#, measured in DMSO/H₂O mixtures, is parallel for 1 and 2. This similar behaviour of 1 and 2 with respect to variation in solvent composition is evidence that it is not possible to use this technique of solvent effect for the mechanistic diagnosis of elimination reactions.     

Addition of dihalocarbenes to 3H-1,5-benzodiazepines. Synthesis of 2H-bisazirino[1,2-a:2′,1′-d][1,5]benzodiazepines

Addition of dihalocarbenes, generated from haloforms using a phase transfer catalyst, to 3H-1,5-benzodi-azepines gave 2H-Bisazirino[1,2-a:2′,1′-d][1,5]benzodiazepines, a new ring system.     

光致电子转移对Rhodamine 6G基态分子结构影响的非共振Raman光谱研究

基于非共振Raman 光谱和量子化学计算, 研究了在纯电子给体N,N-二乙基苯胺(DEA)溶剂中Rhodamine 6G (Rh6G⁺)基态分子结构的变化, 这有利于理解该体系中的光致分子间电子转移(PIET). 与PIET相耦合的所有振动模式已被确定和指认. 结果表明: 对应于氧杂蒽环且位于675 cm^-1处最主要的振动模式对PIET 有着至关重要的贡献; 通过与电荷转移复合物(Rh6G/DEA⁺)的发色团芳香族环的C―C伸展振动模式作比较, C=C伸展振动对PIET的影响更敏感. 本文的研究工作能为具有合适电子转移特性的光伏器件中分子结构或溶剂环境的设计提供新颖的观点.     

Reactions of Sterically Protected 1-Halo- and 1-Pseudohalo-2-Phosphaethenyl-Lithiums

Abstract

Phosphorus analogs of alkylidenecarbenoid, Ar-P=C(X)Li, where X equals halogen or pseudohalogen atom, such as C1, Br, or SPh, have been generated by use of the 2,4,6-tri-t-butylphenyl group (abbreviated to Ar in the Scheme) as a protecting group for low coordinated organophosphorus compounds. The reaction with methyl iodide and with some aldehydes or ketones, at low temperature, gave the corresponding alkylation products^[l]. The reaction with copper salts gave 1,4-diphosphabutadiene (1) or 1,4-diphosphabutatriene (2), depending upon the substituent X^[2,3], as well as reaction conditions, such as reaction tenlperature and time, solvent, presence or absence of oxygen. Upon warming the phosphaethenyllithiun1s, thus generated, the chloro derivative of E-configuration gave a phosphaalkyne (3) via [1,2]-aromatic migration^[4], whereas the bromo derivative of Z-configuration gave a l-phospha-3,4-dihydronaphthalene derivative (4), that is a formal C-H insertion product of a phosphinidenecarbene intermediate^[5].     

The feasibility of a pyrrolidinium-based ionic liquid solvent for non-graphitic carbon electrodes

The feasibility of a pyrrolidinium-based room-temperature ionic liquid (RTIL) as the solvent for lithium-ion batteries is tested by analyzing its intercalation behavior and thermal stability. The RTIL-cations are intercalated into a graphitic carbon and a part of them are irreversibly trapped inside the graphene layers. These trapped cations block Li⁺ intercalation to give only a marginal capacity. In contrast, such a cation insertion/trapping is absent in two non-graphitic carbons; hard carbon and soft carbon. A stable cycle performance with a Li⁺ insertion capacity of about 200 mAh g^{− 1} is attained. The absence of RTIL-cation insertion is evidenced by the cyclic voltammograms and Raman spectra. A calorimetric study reveals that this RTIL has a higher thermal stability and less reactivity with lithiated carbons as compared with the carbonate-based solvent. The use of this RTIL solvent for the non-graphitic carbons seems to be feasible.     

High Uptake of ReO4− and CO2 Conversion by a Radiation‐Resistant Thorium–Nickle [Th48Ni6] Nanocage‐Based Metal–Organic Framework

Assembled from [Th₄₈Ni₆] nanocages, the first transition‐metal (TM)‐thorium metal–organic framework (MOF, 1 ) has been synthesized and structurally characterized. 1 exhibits high solvent and acid/base stability, and resistance to 400 kGy β irradiation. Notably, 1 captures ReO₄^? (an analogue of radioactive ⁹⁹TcO₄^?, a key species in nuclear wastes) with a maximum capacity of 807 mg g^?1, falling among the largest values known to date. Furthermore, 1 can enrich methylene blue (MB) and can also serve as an effective and recyclable catalyst for CO₂ fixation with epoxides; there is no significant loss of catalytic activity after 10 cycles. Theoretical studies with nucleus‐independent chemical shifts and natural bond orbital analysis reveal that the [Th₆O₈] clusters in 1 have a unique stable electronic structure with (d–p)π aromaticity, partially rationalising 1 ′s stability.     

Polymer-anchored platinum complexes as catalysts for the Baeyer–Villiger oxidation of ketones: preparation and catalytic properties

The preparation of a variety of catalysts obtained by ion exchange of the complex [(dppb)Pt(μ−OH)]₂²⁺ with sulfonated styrene–divinylbenzene copolymers is reported. Copolymers used are commercial ion exchange resins containing either 4% or 20% DVB and they were loaded with either Li⁺ or NBu₄⁺ prior to exchange with the Pt complex. Metal loading in the heterogenized catalysts is in the range 2–8% by weight. Their catalytic properties in the Baeyer–Villiger oxidation of methylcyclohexanone with hydrogen peroxide appear to be best in terms of activity and productivity either in neat ketone or in EtOH as the solvent. The use of commercial resins with high exchange capacity prevents the use of DCE as the solvent, i.e., the optimum conditions for the homogeneous system, thereby leading to activities and productivities that are generally lower than their homogeneous counterpart. A discussion on the influence of the philicity properties of the support with respect to the performance of the catalyst is reported.     

Tetrahydrofuran–water extraction,in-line clean-up and selective liquid chromatography/tandem mass spectrometry for the quantitation of perfluorinated compounds in food at the low picogram per gram level

A new solvent extraction system was developed for extraction of PFCs from food. The extraction is carried out with 75:25 (v/v) tetrahydrofuran:water, a solvent mixture that provides an appropriate balance of hydrogen bonding, dispersion and dipole–dipole interactions to efficiently extract PFCs with chains containing 4–14 carbon atoms from foods. This mixture provided recoveries above 85% from foods including vegetables, fruits, fish, meat and bread; and above 75% from cheese. Clean-up with a weak anion exchange resin and Envi-carb SPE, which were coupled in line for simplicity, was found to minimize matrix effects (viz. enhancement or suppression of electrospray ionization). The target analytes (PFCs) were resolved on a perfluorooctyl phase column that proved effective in separating mass interferences for perfluorooctane sulfonate (PFOS) in fish and meat samples. The mass spectrometer was operated in the negative electrospray ionization mode and used to record two transitions per analyte and one per mass-labeled method internal standard. The target PFCs were quantified from solvent based calibration curves. The limits of detection (LODs) were as low as 1–5 pg analyte g⁻¹ food; by exception, those for C₄ and C₅ PFCs were somewhat higher (25–30 pg g⁻¹) owing to their less favourable mass response. To the best of our knowledge these are among the best LODs for PFCs in foods reported to date. The analysis of a variety of foods revealed contamination with PFCs at levels from 4.5 to 75 pg g⁻¹ in 25% of samples (fish and packaged spinach). C₁₀–C₁₄ PFCs were found in fish, which testifies to the need to control long-chain PFCs in this type of food. The proposed method is a useful tool for the development of a large-scale database for the presence of PFCs in foods.     

The solvent effect on a styryl-bodipy derivative functioning as an AND molecular logic gate

We study via DFT and TDDFT calculations the photophysical processes of a styryl-bodipy derivative, ( 1 ), of its monometallic complexes 1-M ²⁺ (M = Ca, Zn, and Hg), and its trimetallic complex ( 2 ) unprotonated, protonated and complexed with water molecules in water solvent and in acidic conditions. The main targets of this study are to gain information regarding published reports on fluorophore species mentioning that fluorescent switching results from trace water, to study how 1 behaves in water solvent which is a common used solvent for molecular logic gates (MLG), and how it behaves in acidic conditions. We conclude that in water solvent, as in acetonitrile solvent (which was found before both theoretically and experimentally) there will be a quenching of emission spectra in 1 and 1-M ²⁺ and a retaining of emission in 2 . However, contrary to acetonitrile solvent, in water, a weak peak will be observed for 1 and 1-M ²⁺ , due to a small ratio of reversible protonation, showing that in acetonitrile 1 acts as a better MLG candidate than in water solvent. On the other hand, in acidic conditions all five species will emit and as a result, 1 will not be an AND MLG, showing that the selection of the solvent conditions is crucial for a species to act as an MLG candidate. Finally, we conclude that the retaining of emission is accomplished by the simultaneous tetrahedral geometry of all three aniline N atoms.     

On the use of the Bayliss-McRae dispersion model in NMR solvent effects

The use of the Bayliss-McRae theory on the solvent induced electronic frequency shifts for NMR dispersion shifts is criticized. It is suggested that the NMR shifts should actually be proportional to the square of the Bayliss-McRae function. It is shown that the methane gas-to-liquid shifts in eleven halo-methanes as solvents are indeed proportional to this squared function; ?σ_m(CH₄) = 9.62 (n₂²?1)²/(2n₂²+1)² ppm, where n₂ is the refractive index of the solvent. The relation between this solvent factor and several existing continuum models for NMR medium shifts is discussed.     

Amide-Exchange-Rate-Edited NMR （AERE-NMR） Experiment： A Novel Method for Resolving Overlapping Resonances

This paper describes an amide-exchange-rate-edited （AERE） NMR method that can effectively alleviate the problem of resonance overlap for proteins and peptides. This method exploits the diversity of amide proton exchange rates and consists of two complementary experiments： （1） SEA （solvent exposed amide）-type NMR experiments to map exchangeable surface residues whose amides are not involved in hydrogen bonding, and （2） presat-type NMR experiments to map solvent inaccessibly buried residues or nonexchangeable residues located in hydrogen-bonded secondary structures with properly controlled saturation transfer via amide proton exchanges with the solvent. This method separates overlapping resonances in a spectrum into two complementary spectra. The AERE-NMR method was demonstrated with a sample of ^15N/^13C/^2H（70%） labeled ribosome-inactivating protein trichosanthin of 247 residues.