Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Synthesis,characterization and catalytic performance of palladium supported on pyridine‐based covalent organic polymer for Suzuki‐Miyaura reaction

A bipyridine‐based covalent organic polymer (COP) was successfully synthesized by condensation of trimesoyl chloride (TMC) and 2,2′‐bipyridine‐5,5′‐diamine (Bpy) under ambient conditions. This material was modified by coordination of PdCl₂ to COP framework, affording a hybrid material, Pd@TMC‐Bpy COP, which was applied as a highly efficient heterogeneous catalyst for Suzuki‐Miyaura reaction under ligand‐free conditions in ethyl lactate. The catalyst could be reused for five times without obvious loss of its activity.     

Development of Carbazole and Bipyridine Copolymers as Novel Photovoltaic Materials

Summary: A novel acrylate polymer with a carbazole pendant group and bipyridine derivatives as side chains was synthesized, in which derivatives of bipyridine as electro-optic chromophores and carbazole as photoconductive moiety were covalently linked to the acrylate backbone. 2–(Carbazol-9-yl)ethyl methacrylate (CEM) and methacrylic 2-[5-(2-{5,5′-dimethyl-6′-[2-(5-pentylthiophen-2-yl)vinyl]-3,3′-bipyridin-6-yl}vinyl)thiophen-2-yl]ethyl methacrylate (BiPy) were synthesized and then copolymerized to give 99:1, 98:2, 92:8 (mol/mol) CEM/BiPy copolymers. Films of the copolymers blended with poly(3-octylthiophene) (P3OT) or poly(3-decylthiophene) (PDT) and sandwiched between the transparent ITO and Al electrode were examined for photovoltaic properties.     

Liquid-crystalline bisadducts of [60]fullerene

A second-generation cyanobiphenyl-based dendrimer was used as a liquid-crystalline promoter to synthesize mesomorphic bisadducts of [60]fullerene. Liquid-crystalline trans-2, trans-3, and equatorial bisadducts were obtained by condensation of the liquid-crystalline promoter, which carries a carboxylic acid function, with the corresponding bisaminofullerene derivatives. A monoadduct of fullerene was also prepared for comparative purposes. All the compounds gave rise to smectic A phases. An additional mesophase, which could not be identified, was observed for the trans-2 derivative. The supramolecular organization of the monoadduct derivative is governed by steric constraints. Indeed, for efficient space filling, adequacy between the cross-sectional areas of fullerene (approximately 100 A(2)) and of the mesogenic groups (approximately 22-25 A(2) per mesogenic group) is required. As a consequence, the monoadduct forms a bilayered smectic A phase. The supramolecular organization of the bisadducts is essentially governed by the nature and structure of the mesogenic groups and dendritic core. Therefore, the bisadducts form monolayered smectic A phases. The title compounds are promising supramolecular materials as they combine the self-organizing behavior of liquid crystals with the properties of fullerene.     

Synthesis and characterization of chiral polymer complexes incorporating polybinaphthyls,bipyridine, and Eu(III)

Chiral conjugated polymers P‐1 and P‐2 were synthesized by the polymerization of (S)‐3,3′‐diiodo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl and (S)‐6,6′‐dibromo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl, respectively, with 5,5′‐divinyl‐2,2′‐bipyridine through a Heck cross‐coupling reaction. Chiral polymer complexes P‐C‐1 and P‐C‐2 were obtained by the bipyridine chelating coordination of P‐1 and P‐2 with Eu(TTA)₃·2H₂O (where TTA is 2‐thenoyltrifluoroacetonate). Polymers P‐1 and P‐2 and polymer complexes P‐C‐1 and P‐C‐2 exhibited intense circular dichroism signals, with negative and positive Cotton effects in their circular dichroism spectra. The chiral polymers showed strong green‐blue fluorescence because of the efficient energy migration from the extended π‐electronic structure of the conjugated polymer main to the chiral binaphthyl core. The chiral polymer complexes could have not only polymer fluorescence but also the characteristic fluorescence of Eu(III) (⁵D₀→⁷F₂) at a different excited wavelength. These kinds of chiral polymer complexes incorporating polybinaphthyls, bipyridine, and Eu(III) moieties are expected to provide an understanding of the relationship between the structure and properties of chiral polymer complexes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 650–660, 2007     

二维共价有机框架材料中引入含氮配体用于络合金属催化

共价有机骨架材料(COF)也被称为“有机分子筛”,具有孔道结构开放有序、易于进行化学修饰改性、化学/热稳定性好等优点,是一种新型的有机聚合物多孔材料.近年来,以COF材料为催化剂载体负载金属化合物用于制备多相反应催化剂已经成为材料领域研究的热点,表现出高活性和高选择性.但是到目前为止,仍未找到简单有效地控制骨架中金属负载量和分散性的方法,这已成为该领域一个具有挑战性的课题.
　　本文以2,2’-联吡啶-5,5’-二甲醛作为其中一个结构基元,成功把联吡啶配体引入到二维材料中.除此之外,由于COF是以亚胺键联接构筑形成的,因此框架中同时存在联吡啶和亚胺键两种含氮配体.我们通过红外光谱、结构模拟、元素分析、热失重分析、透射电镜(TEM)、X-射线光电子能谱、电感耦合等离子体色谱等手段详细表征了所制备的二维共价有机框架材料对醋酸钯(Pd(OAc)2)分子的络合负载行为.
　　研究发现,联吡啶和亚胺键均可参与配位Pd(OAc)2,与亚胺键配位的Pd(OAc)2分布于框架的层与层之间,而与联吡啶配位的则部分占据了框架的孔道,导致孔径减小.另外,由于框架中的联吡啶配体含量可通过加入2,2’-联吡啶-5,5’-二甲醛含量的变化实现线性调控,因此也可调节与其配位的Pd(OAc)2含量,其负载量可控制在14.3–18.7 wt%,是目前已报道的二维COF中的最高值;另外, COF材料中调控金属负载量尚未见报道. TEM结果显示,负载在框架中的催化剂分子没有发生团聚,框架的孔道仍处于开放状态,因而反应底物可以自由地出入一维孔道并与络合的催化剂充分接触.另外,由于催化剂在框架内部可以达到分子级别的分散,而且其负载量和负载位置都易于控制,因而对有机反应表现出了优异的催化性能.
　　我们尝试了以不同Pd负载量的COF为多相催化剂催化Heck反应.结果发现, Pd(II)@75%BPy COF(Pd负载量为最高值18.7 wt%)的催化活性最高,对不同底物均表现出优异的催化性能,产率达73–96%,反应速率遵循一级动力学曲线.且催化剂经多次循环利用仍能保持高活性,框架的有序结构也未被破坏,因此该材料有望用于各种类型优异的多相反应催化剂.     

碳氟表面活性剂与碳氢表面活性剂混合水溶液的表面吸附和胶团形成 I: 全氟辛酸钠-溴化辛基三甲铵体系

The surface adsorption and micelle formation of the mixed aqueous solutions of sodium perfluorooctanoate (7CFNa) and n-octyltrimethylamonium bromide (C8NBr) have been investigated by studying the surface tension-concentration relations of the solutions. It has been found that (1) The surface activity of the mixed system is much higher than that of 7CFNa and C8NBr. C8NBr is a very effective synergist for 7CFNa in surface activity, and vice versa. (2) By applying Gibbs adsorption equation, the total amount of adsorption (\I\t), the individual adsorption amount of the single surfactants (\I\7CF-, \I\C8N+) and the average molecular areas of them have been calculated. The adsorption value (saturated, \I\T) increases by 54% as the molal ratio of 7CFNa-C8NBr varies from 100:1 to 1:300. (3) From the adsorption data, it appears that the structure of surface layer of the 7CFNa-C8NBr solutions is peculiar and quite different from that of the cationic-anionic hydrocarbon surfactants. Firstly, the molal ratio of the two components in the surface layer of the 1:1 mixed solution is not 1:1 (7CFNa is adsorbed perferentially). Secondly, the molecular area at the maximum adsorption is very small (22.7A2). This could be attributed to the balancing of the electrical attraction between positive and negative ions and the mutual phobicity between the fluorocarbon and hydrocarbon chains. It has been concluded that the saturated adsorption film would possibly have a double-layer structure: the upper layer consists of the oriented 7CF- with the fluorocarbon chain toward the gaseous phase and the lower layer consists of randomly oriented C8N+ with the positive ionic head attached to the negative ionic head of 7CF- -- thus the 7CF- adsorption layer would behave as a platform for the adsorption of C8N+. (4) The limiting surface tension of the mixed solutions is very low (-15mNm-1) even if the molal ratio of 7CFNa-C8NBr is small, and so is the oil-water interfacial tension. Therefore it is capable of spreading the dilute aqu     

Two New Lead(II) Coordination Polymers with (Substituted) Bipyridine and Auxiliary Nitrate Ligands

The reaction of lead(II) nitrate with 4,4′‐bipyridine (4,4′‐bpy) and 4,4′‐dimethyl‐2,2′‐bipyridine (4,4′‐dm‐2,2′‐bpy) or 5,5′‐dimethyl‐2,2′‐bipyridine (5,5′‐dm‐2,2′‐bpy) resulted in the fomation of single crystals of [Pb₂(4,4′‐bpy)(5,5′‐dm‐2,2′‐bpy)₂(NO₃)₄] ( 1 ) and [Pb₃(4,4′‐bpy)₂(4,4′‐dm‐2,2′‐bpy)₂(NO₃)₆] ( 2 ). The new compounds have been characterized by single‐crystal X‐ray diffraction structure analysis as well as through elemental analysis, IR, ¹H‐NMR and ¹³C‐NMR spectroscopy and their stability has been studied by thermal analysis. In the crystal structure of ( 1 ) formula‐like dimers are further connected to a 2‐D network through the auxiliary nitrate ligands. The crystal structure of ( 2 ) exhibits two crystallographically independent Pb^II central atoms (in a ratio of 1:2). With the aid of the 4,4′‐bpy and the nitrate ions, a 3‐D polymeric structure is achieved.     

Study on new chiral liquid crystalline monomers and polymers containing menthyl groups

A series of new chiral monomers (M1–M4) and the corresponding siloxane polymers (P1–P4) containing menthyl groups were synthesised to establish the relationship between their structure and liquid crystalline properties. The effect of the mesogenic core rigidity and the spacer length on the phase behaviour of the monomers and polymers obtained in this study was discussed. The selective reflection of light for the chiral monomers was studied with UV-Vis spectrometer. Polarising optical microscopy, differential scanning calorimetry, X-ray diffraction and thermogravimetric analysis were used to characterise the phase behaviour and thermal stabilities. It was found that these chiral monomers and polymers were beneficial for the formation of the mesophases when a flexible spacer was inserted between the mesogenic core and terminal menthyl groups. M1–M3 showed enantiotropic chiral smectic C phase and cholesteric phase, and monotropic cubic blue phase on cooling cycle. M4 only showed cholesteric phase. P1–P4 showed a smectic A phase. With increasing the mesogenic core rigidity or decreasing the spacer length, the corresponding melting temperatures, glass transition temperatures and isotropic temperatures all increased.     

Experimental assessment of quasi-binary picture of thermotropics: induced smectic A phase in 7CB-n-heptane system

Quasi-binary (QB) picture of thermotropics, which regards a neat thermotropic liquid crystal as a binary system consisting of (semi)rigid core and molten alkyl chain, was assessed experimentally for the most famous (and representative) thermotropic mesogenic series nCB. By adding n-heptane as solvent, the smectic A phase was induced in 7CB-n-heptane system. Small angle x-ray diffraction showed that the QB picture holds not only in the phase behavior but also in the structure. It is suggested that the melting of 8CB and 9CB to isotropic liquid via smectic and nematic liquid crystals can be understood as a thermotropic-lyotropic crossover.     

Effect of core group substituents on the monomer mesophase,photocuring, and film viscoelastic properties of mesogenic diacrylates

In this paper, the influence of molecular structure variations on the mesophase behavior, photocurability, and film properties of polymerizable mesogenic diacrylates is reported. The effect of methoxy or chloro substituent on the mesophase behavior of the monomers, present at the 2‐position of the phenylene core, in comparison to the unsubstituted core, has been studied using thermal and photo‐DSC techniques. These monomers were used in combination with a chiral dopant to form cholesteric mesophases, which was subsequently crosslinked through photopolymerization. Optical microscopy and polarized optical microscopy (POM) were used to study the morphology of monomers as well as the photopolymerized films. Optical images show the influence of chiral dopant on the texture present in the films, both before and after the crosslinking. POM images show the mesophase present in the monomers and the free films. Evaluation of viscoelastic properties of the photocured films demonstrates the influence of mesogenic core substituents on the network transition temperature, modulus, and damping characteristics. Copyright © 2008 John Wiley & Sons, Ltd.     

Optimization of the HPLC enantioseparation of 3,3′‐dibromo‐5,5′‐disubstituted‐4,4′‐bipyridines using immobilized polysaccharide‐based chiral stationary phases

The HPLC enantioseparation of nine atropisomeric 3,3′,5,5′‐tetrasubstituted‐4,4′‐bipyridines was performed in normal and polar organic (PO) phase modes using two immobilized polysaccharide‐based chiral columns, namely, Chiralpak IA and Chiralpak IC. The separation of all racemic analytes, the effect of the chiral selector, and mobile phase (MP) composition on enantioseparation and the enantiomer elution order (EEO) were studied. The beneficial effect of nonstandard solvents, such as tetrahydrofuran (THF), dichloromethane (DCM), and methyl t‐butyl ether on enantioseparation was investigated. All selected 4,4′‐bipyridines were successfully enantioseparated on Chiralpak IA under normal or PO MPs with separation factors from 1.14 to 1.70 and resolutions from 1.3 to 6.5. Two bipyridines were enantioseparated at the multimilligram level on Chiralpak IA. Differently, Chiralpak IC was less versatile toward the considered class of compounds and only five bipyridines out of nine could be efficiently separated. In particular, on these columns, the ternary mixture n‐heptane/THF/DCM (90:5:5) as MP had a positive effect on enantioseparation. An interesting phenomenon of reversal of the EEO depending on the composition of the MP for the 3,3′‐dibromo‐5,5′‐bis‐(E)‐phenylethenyl‐4,4′‐bipyridine along with an exceptional enantioseparation for the 3,3′‐dibromo‐5,5′‐bis‐ferrocenylethynyl‐4,4′‐bipyridine (α = 8.33, R_s = 30.6) were observed on Chiralpak IC.     

具有氟烷基边链和手性中心液晶化合物的合成及液晶性研究

本文设计合成了十个含氟烷基边链和手性中心的液晶化合物，并通过DSC和偏光显微镜对它们的液晶性进行了研究。其中二环系液晶化合物不显示液晶相或仅显示单边近晶A相。三环系液晶化合物中较长的氟烷基边链有利于近晶相的形成，且当液晶核另一端的烷氧基链的长度适中时，在氟烷基边链和液晶核之间具有手性中心的液晶分子显示了手性近晶C相和其它液晶相。     

Mechanisms of water oxidation catalyzed by ruthenium diimine complexes

(18)O-isotope-labeling studies have led to the conclusion that there exist two major pathways for water oxidation catalyzed by dimeric ruthenium ions of the general type cis, cis-[L2Ru(III)(OH2)]2O(4+). We have proposed that both pathways involve concerted addition of H and OH fragments derived from H 2O to the complexes in their four-electron-oxidized states, i.e., [L2Ru(V)(O)]2O(4+), ultimately generating bound peroxy intermediates that decay with the evolution of O2. The pathways differ primarily in the site of addition of the OH fragment, which is either a ruthenyl O atom or a bipyridine ligand. In the former case, water addition is thought to give rise to a critical intermediate whose structure is L2Ru(IV)(OH)ORu(IV)(OOH)L2(4+); the structures of intermediates involved in the other pathway are less well defined but may involve bipyridine OH adducts of the type L2Ru(V)(O)ORu(IV)(OH)(L(*)OH)L(4+), which could react further to generate unstable dioxetanes or similar endoperoxides. Published experimental and theoretical support for these pathways is reviewed within the broader context of water oxidation catalysis and related reactions reported for other diruthenium and group 8 monomeric diimine-based catalysts. New experiments that are designed to probe the issue of bipyridine ligand "noninnocence" in catalysis are described. Specifically, the relative contributions of the two pathways have been shown to correlate with substituent effects in 4,4'- and 5,5'-substituted bipyridine complexes in a manner consistent with the formation of a reactive OH-adduct intermediate in one of the pathways, and the formation of OH-bipyridine adducts during catalytic turnover has been directly confirmed by optical spectroscopy. Finally, a photosensitized system for catalyzed water oxidation has been developed that allows assessment of the catalytic efficiencies of the complex ions under neutral and alkaline conditions; these studies show that the ions are far better catalysts than had previously been assumed based upon reported catalytic parameters obtained with strong oxidants in acidic media.     

A bent‐core dopant‐induced smectic A* twist state†

The phase behaviour of a commercial calamitic ferroelectric liquid crystal mixture, doped with different mesogenic and non‐mesogenic bent‐core molecules was investigated through polarising microscopy, optical measurements and quenched growth. A twisted smectic structure, similar but not equivalent to a twist grain boundary (TGB) phase, and absent in the neat FLC mixture, was verified. The twisted smectic state can only be observed on cooling and its stability depends on the rate of temperature decrease, which indicates a kinetically governed behaviour. Further, the growth dynamics of the low temperature uniform SmA* bookshelf structure is dominated by viscosity instead of free energy density, as would be expected for a true thermodynamic phase transition. The investigations signify the chiral induction capability of achiral, bent‐core dopant molecules and we believe that the observed behaviour represents the onset of TGB formation at very large pitch. It can thus give valuable information for the fundamental physical understanding of twist grain boundary phase formation.     

Liquid crystalline model compounds based on 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA)

3,3',4,4'-Biphenyltetracarboxylic dianhydride (BPDA) was investigated as the central core unit in mesogenic molecules. Of particular interest was whether the BPDA unit could be self-constrained into a trans-conformation, and thus organize into a liquid crystalline phase. Two homologous series of symmetrical substituted model compounds, 3,3',4,4'-biphenyltetracarboxy-N-N'-bis-(4-n- alkylphenyl) diimides and 3,3',4,4'-biphenyltetracarboxy-N-N'-bis-(4-n- alkoxyphenyl)diimides were synthesized. For both series high temperature smectic A phases were observed. To our knowledge these are the first examples of liquid crystalline behaviour observed with BPDA as the mesogenic core.     

High‐throughput experimentation in atom transfer radical polymerization: A general approach toward a directed design and understanding of optimal catalytic systems

High‐throughput experimentation (HTE) was successfully applied in atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) for the rapid screening and optimization of different reaction conditions. A library of 108 different reactions was designed for this purpose, which used four different initiators [ethyl 2‐bromoisobutyrate, methyl 2‐bromopropionate, (1‐bromoethyl)benzene, and p‐toluenesulfonyl chloride], five metal salts (CuBr, CuCl, CuSCN, FeBr₂, and FeCl₂), and nine ligands (2,2′‐bipyridine and its derivatives). The optimal reaction conditions for Cu(I) halide, CuSCN, and Fe(II) halide‐mediated ATRP systems with 2,2′‐bipyridine and its 4,4′‐dialkyl‐substituted derivatives as ligands were determined. Cu(I)‐mediated systems were better controlled than Fe(II)‐mediated ones under the examined conditions. A bipyridine‐type ligand with a critical length of the substituted alkyl group (i.e., 4,4′‐dihexyl 2,2′‐bipyridine) exhibited the best performance in Cu(I)‐mediated systems, and p‐toluenesulfonyl chloride and ethyl 2‐bromoisobutyrate could effectively initiate Cu(I)‐mediated ATRP of MMA, resulting in polymers with low polydispersities in most cases. Besides, Cu(I) halide‐mediated ATRP with 4,5′‐dimethyl 2,2′‐bipyridine as the ligand and p‐toluenesulfonyl chloride as the initiator proved to be better controlled than those with 4,4′‐dimethyl 2,2′‐bipyridine as the ligand, and polymers with much lower polydispersities were obtained in the former cases. This successful HTE example opens up a way to significantly accelerate the development of new catalytic systems for ATRP and to improve the understanding of structure–property relationships of the reaction systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1876–1885, 2004     

Emulsion electrospinning of a collagen-like protein/PLGA fibrous scaffold: empirical modeling and preliminary release assessment of encapsulated protein

The effectiveness of a multifunctional scaffold produced by the electrospinning of emulsions composed of organic PLGA and aqueous collagen-like protein (denoted as Fol-8Col) solutions is demonstrated. The resultant Fol-8Col/PLGA fibrous scaffolds with homogeneous morphology have mean fiber diameters from 600 to 2,000 nm. A uniform distribution of encapsulated Fol-8Col in the fibers is observed by fluorescence microscopy. TEM is used to clarify the representative core/sheath structure of emulsion electrospun Fol-8Col/PLGA fibers. Preliminary release assessment of encapsulated Fol-8Col shows results of sustained release for more than one month from the Fol-8Col/PLGA fibrous mats. The cytocompatibility of fibroblast cell line L929 with the fibrous composite seems promosing.     

Metallomacrocycles with a Difference: Macrocyclic Complexes with Exocyclic Ruthenium(II)‐Containing Domains

The templated synthesis of organic macrocycles containing rings of up to 96 atoms and three 2,2′‐bipyridine (bpy) units is described. Starting with the bpy‐centred ligands 5,5′‐bis[3‐(1,4‐dioxahept‐6‐enylphenyl)]‐2,2′‐bipyridine and 5,5′‐bis[3‐(1,4,7‐trioxadec‐9‐enylphenyl)]‐2,2′‐bipyridine, we have applied Grubbs’ methodology to couple the terminal alkene units of the coordinated ligands in [FeL₃]²⁺ complexes. Hydrogenation and demetallation of the iron(II)‐containing macrocyclic complexes results in the isolation of large organic macrocycles. The latter bind {Ru(bpy)₂} units to give macrocyclic complexes with exocyclic ruthenium(II)‐containing domains. The complex [Ru(bpy)₂(L)]²⁺ (isolated as the hexafluorophosphate salt), in which L=5,5′‐bis[3‐(1,4,7,10‐tetraoxatridec‐12‐enylphenyl)]‐2,2′‐bipyridine, undergoes intramolecular ring‐closing metathesis to yield a macrocycle which retains the exocyclic {Ru(bpy)₂} unit. The poly(ethyleneoxy) domains in the latter macrocycle readily scavenge sodium ions, as proven by single‐crystal X‐ray diffraction and atomic absorption spectroscopy data for the bulk sample. In addition to the new compounds, a series of model complexes have been fully characterized, and representative single‐crystal X‐ray structural data are presented for iron(II) and ruthenium(II) acyclic and macrocyclic species.     

Biaxial smectic phases in non-linear optical properties and phase behaviour of an oxdiazole liquid crystal

A symmetric, low-molecular-mass liquid crystal based on the oxadiazole ring was synthesized and characterized. The symmetric position of the heterocyclic group in the centre of the liquid crystal, bis(4-hexyloxyphenyl)4,4-(1,3,4-oxadiazole-2,5-diyl)dicarboxylate, yields a very rigid and non-linear mesogenic core. Despite this non-linear structure, a broad liquid crystalline range with a smectic C and a smectic A phase was found. Conoscopic experiments on freely suspended films revealed the existence of two optical axes in the smectic A phase, indicating a phase symmetry anticipated for either a 'McMillan' biaxial smectic phase or a biaxial (achiral) ferroelectric smectic phase.