Surface structures and electrochemical characteristics of surface-modified carbon anodes for lithium ion battery

Petroleum coke and those heat-treated at 1860 °C, 2100 °C, 2300 °C 2600 °C and 2800 °C (abbreviated as PC, PC1860, PC2100, PC2300, PC2600 and PC2800) were fluorinated by elemental fluorine of 3 × 10⁴ Pa at 200 °C and 300 °C for 2 min. Natural graphite powder samples with average particle sizes of 5 μm, 10 μm and 15 μm (abbreviated as NG5μm, NG10μm and NG15μm) were also fluorinated by ClF₃ of 3 × 10⁴ Pa at 200 °C and 300 °C for 2 min. Transmission electron microscopic (TEM) observation revealed that closed edge of PC2800 was destroyed and opened by surface fluorination, which increased the first coulombic efficiencies of PC2300, PC2600 and PC2800 by 12.1–18.2% at 60 mA/g and by 13.3–25.8% at 150 mA/g in 1 mol/dm³ LiClO₄–ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1 in volume). Light fluorination of NG10μm and NG15μm increased the first coulombic efficiencies by 22.1–28.4% at 150 mA/g in 1 mol/dm³ LiClO₄–EC/DEC/PC (PC: propylene carbonate, 1:1:1 in volume).     

Synthesis and characterization of nanoparticles of α-Bi2Mo3O12 prepared by co-precipitation method: Langmuir adsorption parameters and photocatalytic properties with rhodamine B

Nanoparticles of α-Bi₂Mo₃O₁₂ were prepared by co-precipitation method at calcination temperatures of 250, 300, 400 and 480 °C. The characterization of α-Bi₂Mo₃O₁₂ synthesized at different temperatures was carried out by X-ray diffraction (XRD), thermal analysis (TGA/DTA), transmission electron microscopy (TEM), and diffuse reflectance spectroscopy (DRS). Adsorption parameters and photocatalytical activity under visible light irradiation of α-Bi₂Mo₃O₁₂ were evaluated using the rhodamine B (rhB) dye as model. The adsorption constant (K) and maximum amount of dye adsorbed (q_max) on the surface of the samples synthesized were evaluated following the Langmuir isotherm. The sample calcinated at 250 °C showed the maximum adsorption percentage of dye, which ranged between 20 and 46% for initial concentrations of rhB from 5 to 15 mg L^?1, with a K = 6.96 × 10⁵ L mol^?1 and q_max = 2.73 mg g^?1. All samples were able to induce the oxidative photodegradation of rhB, however, the bleaching of dye solution was reached more quickly for the sample calcinated at 250 °C.     

Separation of hydrogen from steam using a SiC-based membrane formed by chemical vapor deposition of triisopropylsilane

A silicon carbide-based membrane was formed in the macropores of an α-alumina support tube by chemical vapor deposition of triisopropylsilane at 700–800°C with a forced cross-flow through the porous wall. The membrane permeated gases except H₂O mainly by the Knudsen diffusion mechanism at permeation temperatures of 50–400°C. The H₂/H₂O selectivity was near or below unity because of the hydrophilic nature of the membrane. After a heat-treatment in Ar at 1000°C for 1 h, however, the membrane formed at a final evacuation pressure of 1 kPa exhibited a H₂/H₂O selectivity of 3–5, for a mixed feed of H₂–H₂O–HBr system, associated in a thermochemical water-splitting process. The H₂ permeance was (5–6)×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ at 50–400°C. The membrane maintained the H₂/H₂O selectivity for more than 100 h in the H₂–H₂O–HBr mixture at 400°C.     

Enhancement of electrochemical performance and thermal compatibility of GdBaCo2/3Fe2/3Cu2/3O5+δ cathode on Ce1.9Gd0.1O1.95 electrolyte for IT-SOFCs

Transition-metal doped double-perovskite structure oxides GdBaCo_2/3Fe_2/3Ni_2/3O_5+δ (FN-GBCO), GdBaCo_2/3Fe_2/3Cu_2/3O_5+δ (FC-GBCO), GdBaCoCuO_5+δ (C-GBCO) and pristine GdBaCo₂O_5+δ (GBCO) were synthesized via a citrate combustion method. The thermal-expansion coefficient (TEC) and electrochemical performance of the oxides were investigated as potential cathodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The TEC exhibited by the FC-GBCO cathode up to 900 °C is 14.6 × 10^?6 °C^?1, which is lower than the value of GBCO (19.9 × 10^?6 °C^?1). Area specific resistances (ASR) of 0.165 Ω cm² at 700 °C and 0.048 Ω cm² at 750 °C were achieved for the FC-GBCO cathode on a Ce_0.9Gd_0.1O_1.95 (CGO) electrolyte. An electrolyte supported (300 μm thick) single-cell configuration of FC-GBCO/CGO/Ni-CGO attained a maximum power density of 435 mW cm^?2 at 700 °C. The unique composition of GBCO co-doped with Fe and Cu ions in the Co sites exhibited reduced TEC and enhancement of electrochemical performance and good chemical compatibility with CGO, and this composition is proving to be a potential cathode for IT-SOFCs.     

Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

Hydrogen/oxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI)

When complexed with alkaline such as potassium hydroxide, sodium hydroxide or lithium hydroxide, films (40 μm thick) of polybenzimidazole (PBI) show conductivity in the 5 × 10⁻⁵–10⁻¹ S/cm⁻¹ range, depending on the type of alkali, the time of immersion in the corresponding base bath and the temperature of immersion. It has been shown that PBI has a remarkable capacity to concentrate KOH, even in an alkaline bath of concentration 3 M. The highest conductivity of KOH-doped PBI (9×10⁻² S cm⁻¹) at 25°C obtained in this work is higher than the we had obtained previously as optimum values for H₂SO₄-doped PBI (5 × 10⁻² S cm⁻¹ at 25°C) and H₃PO₄-doped PBI ( 2 × 10⁻³ S cm⁻¹ at 25°C). PEMFCs based on an alkali-doped PBI membrane were demonstrated, and their characteristics exhibited the same performance as those of PEMFCs based on Nafion® 117. Their development is currently under active investigation.     

Reactions of the HO2 radical with OH,H, Fe2+ and Cu2+ at elevated temperatures

The temperature dependence of the rate constant for the reactions of HO₂ with OH, H, Fe²⁺ and Cu²⁺ has been determined using pulse radiolysis technique. The following rate constants, k (dm³ mol⁻¹ s⁻¹) at 20°C and activation energies, E_a (kJ mol⁻¹) have been found. The reaction with OH was studied in the temperature range 20–296°C (k=7.0×10⁹, E_a=7.4) and the reaction with H in the temperature range 5–149°C (k=8.5×10⁹, E_a=17.5). The reaction with Fe²⁺ was studied in the temperature range 16–118°C (k=7.9×10⁵, E_a=36.8) and the reaction with Cu²⁺ in the temperature range 17–211°C (k=1.1×10⁸, E_a=14.9).     

Preparation via microemulsion method and proton conduction at intermediate-temperature of BaCe1−xYxO3−α

The ceramic powders of BaCe_1?xY_xO_3?α (x = 0.05, 0.10, 0.15, 0.20) have been prepared via a microemulsion method. Green compacts of the powders were sintered to densities higher than 95% of theoretical at the lower temperature (1500 °C). The obtained ceramics showed a single-phase of orthorhombic perovskite. The proton conduction was investigated by employing the techniques of AC impedance and electrochemical hydrogen permeation (hydrogen pumping) at 300–600 °C. It was found that the ceramics were almost pure proton conductors in wet hydrogen, and the highest proton conductivity was observed for x = 0.15 at 600 °C. Ammonia was synthesized successfully from nitrogen and hydrogen at atmospheric pressure in the electrolytic cell using BaCe_0.85Y_0.15O_3?α. The maximum rate of NH₃ formation was found to be 2.1 × 10^?9 mol s^?1 cm^?2 at 500 °C with an applied current of 0.75 mA.     

Proton-conducting membranes based on poly(2,5-benzimidazole) (ABPBI) and phosphoric acid prepared by direct acid casting

We report the preparation of phosphoric acid doped poly(2,5-benzimidazole) (ABPBI) membranes for PEMFC by simultaneously doping and casting from a poly(2,5-benzimidazole)/phosphoric acid/methanesulfonic acid (MSA) solution. The evaporation of MSA yields a very homogeneous membrane having a better controlled composition, avoiding the use of solvent-intensive procedures. Membranes have been prepared with contents of up to 3.0H₃PO₄ molecules per ABPBI repeating unit. These membranes achieve a maximum conductivity of 1.5 × 10⁻² S cm⁻¹ at temperatures as high as 180 °C in dry conditions. These ABPBI membranes are more conveniently prepared than those conventionally formed and doped in separate steps while featuring comparable conductivities (ABPBI × 2.7H₃PO₄ prepared by the soaking method showed a conductivity of 2.5 × 10⁻² S cm⁻¹ at 180 °C in dry conditions).     

Ab initio calculations and mechanism of two proton migration reactions of ethoxy radical

We present a direct ab initio and density functional theory dynamics study of the thermal rate constants of the two H-migration reactions of C₂H₅O radical. MPW1K/6-31+G(d,p) methods were employed to optimize the geometries of all stationary points and to calculate the minimum energy path (MEP). The energies of all the stationary points were refined at the QCISD(T)/aug-cc-pVTZ level of theory. The thermal gas phase rate constants were evaluated based on the energetics from the QCISD(T)/aug-cc-pVTZ//MPW1K/6-31+G(d,p) level of theory using both microcanonical variational transition state theory (μVT) and canonical variational transition state theory (CVT) with the Eckart tunneling correction in the temperature range of 200–2500 K. The extended Arrhenius expression fitted from the μVT/Eckart rate constants of 1,2 H-shift and 1,3 H-shift reactions of C₂H₅O radical in the temperature range of 200–2500 K are k = 3.90 × 10⁻³¹T^12.4e^{(−2.13 × 103/T)} and k = 2.83 × 10⁻²⁹T^11.9e^{(−2.24 × 103/T)} s⁻¹, respectively. The two isomerization rate constants exhibited positive temperature dependence in the calculated temperature region. The variational effects for the two isomerizations of ethoxy radical are small and the tunneling effects are important in the low temperature range. The titled reactions are minor and not essential compared to the decomposition pathways of ethoxy radical.     

Ni infiltrated Sr2Fe1.5Mo0.5O6-δ-Ce0.8Sm0.2O1.9 electrode for methane assisted steam electrolysis process

It is an effective way to substitute air to methane in the anode of solid oxide electrolysis cells to reduce the electrical consumption for simultaneously producing H₂ and high-quality syngas. In the methane assisted mode, the thermodynamic properties and Nernst potential exhibit one order of magnitude reduction of applied voltage to produce comparable electrolysis current. Ni catalysts are infiltrated to the SFM-SDC anode to improve the catalytic properties for methane assisted steam electrolysis. After Ni infiltration, surface oxygen exchange coefficient is effectively accelerated from 3.03 × 10^− 5 to 2.20 × 10^− 4 cm s^− 1, and the current density is significantly enhanced from − 487 to − 1022 mA cm^− 2 at 850 °C and 0.5 V.     

Thermal degradation and evolved gas analysis: A polymeric blend of urea formaldehyde (UF) and epoxy (DGEBA) resin

A polymeric blend has been prepared using urea formaldehyde (UF) and epoxy (DGEBA) resin in 1:1 mass ratio. The thermal degradation of UF/epoxy resin blend (UFE) was investigated by using thermogravimetric analyses (TGA), coupled with FTIR and MS. The results of TGA revealed that the pyrolysis process can be divided into three stages: drying process, fast thermal decomposition and cracking of the sample. There were no solid products except ash content for UFE during combustion at high temperature. The total mass loss during pyrolysis at 775 °C is found to be 97.32%, while 54.14% of the original mass was lost in the second stage between 225 °C and 400 °C. It is observed that the activation energy of the second stage degradation during combustion (6.23 × 10⁻⁴ J mol⁻¹) is more than that of pyrolysis (5.89 × 10⁻⁴ J mol⁻¹). The emissions of CO₂, CO, H₂O, HCN, HNCO, and NH₃ are identified during thermal degradation of UFE.     

Dehydration of tetrahydrofuran by pervaporation using a composite membrane

Tetrahydrofuran (THF) is a strong aprotic solvent, commonly used in the pharmaceuticals industry due to its broad solvency for both polar and non-polar compounds. THF and water form a homogeneous azeotrope at 5.3 wt.% water thus simple distillation is not feasible to dehydrate THF below this concentration. Pervaporation offers a solution since it is not governed by vapour–liquid equilibria. However many polymer-based pervaporation membranes are cast utilizing THF as the casting solvent and so these membranes have a tendency to swell excessively in its presence. This results in poor separation performance and poor long-term stability and thus renders these membranes unsuitable for THF dehydration.In this study, a new membrane available from CM Celfa, CMC-VP-31 has been tested for the dehydration of THF. The membrane shows excellent performance when dehydrating THF with a flux of over 4 kg m⁻² h⁻¹ when dehydrating THF containing 10 wt.% water at 55 °C dropping to 0.12 kg m⁻² h⁻¹ at a water content of 0.3 wt.%. The permeances of water and THF in the membrane were calculated to be 11.76 × 10⁻⁶ and 7.36 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹, respectively, at 25 °C and found to decrease in the membrane with increasing temperature to values of 6.71 × 10⁻⁶ and 1.63 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ at 55 °C. The flux and separation factor were both found to increase with an increase in temperature thus favouring the operation of CMC-VP-31 at high temperatures to optimize separation performance.     

Oxygen permeation through (Bi2O3)0.74(SrO)0.26–Ag (40% v/o) composite

The dense dual phase composite membrane made from strontium-stabilized bismuth oxide and silver, (Bi₂O₃)_0.74(SrO)_0.26–Ag (40% v/o), was investigated. The composite was found to exhibit very high electrical conductivity at the room temperature, revealing that the silver phase has formed electron-conducting networks in the oxide matrix. The composite shows much improved oxygen permeability compared with the bismuth oxide alone. An oxygen flux of 5×10⁻⁸ mol cm⁻² s⁻¹ was observed for a 1.00 mm thick composite at 700°C with oxygen partial pressures of the feed and permeate side at 0.209, 0.0024 atm, respectively. Combination of electrical conductivity and oxygen permeation measurements reveals that oxygen-ion conduction through the oxide phase of the composite is the rate-limiting step for oxygen permeation.     

On the kinetics of thermal electron attachment to perfluoroethers

In this Letter we report the results of the measurements of the rate coefficients for thermal attachment to several perfluoroethers namely perfluorodiglyme (C₆F₁₄O₃), perfluorotriglyme (C₈F₁₈O₄), perfluoropolyether (CF₃–(OCF(CF₃)CF₂)_n–(OCF₂)_m–OCF₃) and perfluorocrownether ((C₂F₄O)₅). Rate coefficients were obtained under thermal conditions in the temperature range 298–378 K. The increase of the rates with temperature follows the Arrhenius law and the activation energies have been obtained from the slope of the ln(k) vs. 1/T. The respective values of the rate coefficients (at 298 K) and activation energies are as follows: 7.7 ± 1.2 × 10^?11 cm³ s^?1 (0.18 ± 0.005 eV), 6.7 ± 2.1 × 10^?11 cm³ s^?1 (0.25 ± 0.004 eV), 2.1 ± 0.2 × 10^?10 cm³ s^?1 (0.16 ± 0.010 eV), 3.1 × 10^?11 cm³ s^?1 (0.27 ± 0.003 eV) for C₆F₁₄O₃, C₈F₁₈O₄, CF₃–(OCF(CF₃)CF₂)_n–(OCF₂)_m–OCF₃ and (C₂F₄O)₅.     

A time-resolved study of the multiphase chemistry of excited carbonyls: Imidazole-2-carboxaldehyde and halides

Imidazole-2-carboxaldehyde (IC) reactivity in the presence of halide anions (Cl^–, Br^–, I^–) has been studied by laser flash photolysis in aqueous solution at room temperature. The absorption spectrum of the triplet state of IC has been measured with a maximum absorption at 330 nm and a weaker absorption band around 650 nm. Iodide anions proved to be efficient quenchers of the triplet state IC, with a rate coefficient k_q of (5.33 ± 0.25) × 10⁹ M⁻¹ s⁻¹. Quenching by bromide and chloride anions was less efficient, with k_q values of (6.27 ± 0.53) × 10⁶ M⁻¹ s⁻¹ and (1.31 ± 0.16) × 10⁵ M⁻¹ s⁻¹, respectively. The halide (X^–) quenches the triplet state; the resulting transient absorption feature matches that of the corresponding radical anion (X₂^–). We suggest that this type of quenching reactions is a driving force of oxidation reactions in the oceanic surface microlayer (SML) and a source of halogen atoms in the atmosphere.     

Kinetic spectrophotometric method for trace determination of thiocyanate based on its inhibitory effect

A kinetic spectrophotometric method for the determination of thiocyanate, based on its inhibitory effect on silver(I) catalyzed substitution of cyanide ion, by phenylhydrazine in hexacyanoferrate(II) is described. Thiocyanate ions form strong complexes with silver(I) catalyst which is used as the basis for its determination at trace level. The progress of reaction was monitored, spectrophotometrically, at 488 nm (λ_max of [Fe(CN)₅PhNHNH₂]^3?, complex) under the optimum reaction conditions at: 2.5 × 10^?3 M [Fe(CN)₆]^4?, 1.0 × 10^?3 M [PhNHNH₂], 8.0 × 10^?7 M [Ag⁺], pH 2.8 ± 0.02, ionic strength (μ) 0.02 M (KNO₃) and temperature 30 ± 0.1 °C. A linear relationship obtained between absorbance (measured at 488 nm at different times) and inhibitor concentration, under specified conditions, has been used for the determination of [thiocyanate] in the range of 0.8–8.0 × 10^?8 M with a detection limit of 2 × 10^?9 M. The standard deviation and percentage error have been calculated and reported with each datum. A most plausible mechanistic scheme has been proposed for the reaction. The values of equilibrium constants for complex formation between catalyst–inhibitor (K_CI), catalyst–substrate (K_s) and Michaelis–Menten constant (K_m) have been computed from the kinetic data. The influence of possible interference by major cations and anions on the determination of thiocyanate and their limits has been investigated.     

Enhancing Stability and Purity of Crude Chitinase of Achatina fulica by Crystallization

A crystallization method was developed to enhance the purity and stability of hydrolase mixtures from the digestive gland of the snail Achatina fulica, as demonstrated by chitinase activity. Crude chitinase was concentrated by freeze drying and then crystallized at 10 °C. Crystal formation was observed under the microscope. The best concentration for crystallization was obtained with 1.5-fold concentrated crude chitinase. Crystallization enhanced the chitinase specific activity from 0.87 U mg^-1 to 0.95 U mg^-1. The loss of chitinase activity from liquid and crystals of crude chitinase on four days storage at 10 °C was 83.0% and 17.7%, respectively. It was concluded that the crude chitinase crystals showed a significant increase in stability and purity.     

Potential energy surface and rate constant of the inversion substitution reactions CH3X + O2 → CH3O2• + X• (X = SH,NO2)

The temperature dependence of the rate constant of the inversion substitution reactions CH₃X + O₂ → CH₃O₂^? + X^? (X = SH, NO₂), can be expressed as k = 6.8 × 10^–12(T/1000)^1.49exp(–62816 cal mol^–1/RT) cm³ s^–1 (X = SH) and k = 6.8 × 10^–12(T/1000)^1.26 × × exp(–61319 cal mol^–1/RT) cm³ s^–1 (X = NO₂), as found with the use of high-level quantum chemical methods and the transition state theory.     

Photochemical generation of carbonate radicals and their reactivity with phenol

The reaction of carbonate radical with phenol in aqueous solution has been investigated in systems in which carbonate radicals were generated by UV irradiation of an aqueous solution of [Co(NH₃)₅CO₃]⁺ (pH 8.0 phosphate buffer). Both steady state and time resolved photolysis experiments were performed. Upon continuous irradiation of complex phenol mixtures, phenol was converted into benzoquinone and dihydroxybenzenes. Benzoquinone was the major by-product in the early stages of the reaction. Laser flash excitation (266 and 355 nm) of the cobalt complex clearly showed the formation of the carbonate radical. When phenol was added to the solution of the complex, a second species was observed which was assigned to the phenoxyl radical. The second-order rate constant of reaction between phenol and carbonate radical was found to be equal to 1.6 × 10⁷ M⁻¹ s⁻¹, in agreement with literature data of 2.2 × 10⁷ M⁻¹ s⁻¹.