M~(2+)(M=Cu、Cd、Ag、Fe)掺杂氧化锌纳米粉晶的抗菌性能

采用柠檬酸溶胶-凝胶法制备了ZnO及M2+掺杂ZnO纳米粉晶(M=Cu、Cd、Ag、Fe),用现代测试技术表征了样品的组成、结构和形貌,以大肠杆菌(Escherichia coli)、金黄色葡萄球菌(Staphylococcus aureus)和白色念珠菌(Candida albicans)为测试菌株,用抑菌圈、最小抑菌浓度和最小杀菌浓度等方法研究了样品在日光照射下的抗菌活性。结果表明,与母体ZnO相比,Cu、Ag、Cd掺杂样品的抗菌性能明显地增强,这可能是由于掺杂金属离子置换Zn2+生成了晶格缺陷和电荷缺陷,阻止了光生电子和光生空穴对的复合从而增强了光催化活性和抗菌活性。     

Cu、N共掺杂TiO2纳米管光催化重整甘油制备合成气

通过碱性水热-离子交换法制备了Cu、N共掺杂TiO₂纳米管(Cu/N-TNT),对其光催化重整甘油制备合成气性能进行了研究。结果表明,Cu/N-TNT具有富含氧空位(O_V)的管状结构,N以Ti-N形式取代部分O形成杂质能级,Cu以Cu²⁺形式掺杂在催化剂晶格间隙和表面,Cu、N共掺杂促进TiO₂表面电荷有效分离,有利于其光催化重整甘油制备合成气活性和选择性的提高。紫外光照射8 h时,掺Cu量为0.15%的Cu/N-TNT催化剂上CO和H₂产量分别为7.3和8.5 mmol·g^-1,是原始TiO₂的9.1和70.8倍,n_H2/n_CO从0.52提高为1.18,n_CO/n_CO2从0.21提高至0.42。Cu/N-TNT表面N和O_V为醛类脱羰和甲酸脱水生成CO提供反应活性位点,Cu作为浅势阱提高光生电子-空穴分离效率。光生空穴(h⁺)是光催化重整甘油制备合成气过程中的主要活性物种,大量羟基自由基(·OH)和超氧自由基(·O₂^-)会导致甘油过度氧化,使CO选择性降低。     

Sm3+掺杂(Y，Tb)AG∶Ce3+荧光粉的制备及光谱性能

采用柠檬酸溶胶凝胶燃烧合成法制备了一系列组成的(Y,Tb)₃Al₅O₁₂∶Ce³⁺,Sm³⁺荧光粉。通过X射线衍射、荧光光谱研究了不同Sm³⁺离子共掺杂浓度下(Y,Tb)AG∶Ce³⁺荧光粉的晶体结构及光致发光性能。Rietveld全图拟合(Rietveld method of whole pattern fitting)结果表明：掺杂后样品仍为纯立方石榴石相,随着Sm³⁺离子共掺杂浓度的增加,样品的晶胞参数增大。在467 nm激发下,激发能由Ce³⁺离子向Sm³⁺离子单向传递,从而在617nm处出现红光发射。Tb³⁺离子取代不利于Ce³⁺离子与Sm³⁺离子的能量传递,同时Ce³⁺离子受更强的晶体场作用及与O^2-离子间增强的共价性使发射主峰红移,Sm³⁺掺杂的TAG∶Ce体系中,激发能由敏化剂Ce³⁺离子向激活剂Sm³⁺离子的传递路径包括5d→4f²F_5/2,7/2(Ce³⁺)和⁷F₆→⁵D₄(Tb³⁺)到⁴G_5/2→⁶H_7/2(Sm³⁺)两部分。     

ZnAl2O4∶Mn4+材料的制备及发光性能

以共沉淀法与煅烧法联用,成功制备了一系列ZnAl₂O₄∶xMn⁴⁺样品。通过扫描电镜和X射线粉末衍射测试研究了样品的形貌和物相特征,结果表明尖晶石结构的ZnAl₂O₄中[AlO₆]的八面体位可以有效被Mn⁴⁺替代。通过荧光激发和发射光谱研究了样品的发光性能,发现Mn⁴⁺在ZnAl₂O₄体系中掺杂可以显示出明亮的红色发光(发射峰值位于680 nm处)。比较不同Mn⁴⁺浓度(Mn与Al的物质的量之比)掺杂样品的发光强度时发现,Mn⁴⁺最佳掺杂浓度为0.06%。通过德克斯特公式分析了发光强度与浓度关系,探究浓度猝灭机制,结果表明最邻近离子之间能量传递造成Mn⁴⁺浓度猝灭的发生。为了提高Mn⁴⁺的发光强度,选择了7种金属离子(Li⁺、Na⁺、K⁺、Ca²⁺、Sr²⁺、Sn²⁺和Ga³⁺)与Mn⁴⁺共掺杂进入ZnAl₂O₄基质中,其中效果较突出的为Li⁺和Ga³⁺,其共掺杂使Mn⁴⁺发光强度分别增强0.6倍和1倍。     

Ag掺杂对n-ZnO纳米棒/p-GaN异质结结构和发光性能的影响

利用简单的水热合成法在p-GaN薄膜上制备了Ag掺杂的一维ZnO纳米棒（ZnO NRs）,并且研究了Ag掺杂对于ZnO NRs结构和形貌以及n-ZnO NRs/p-GaN异质结发光特性的影响。结果表明,不同Ag掺杂浓度的ZnO纳米棒截面均呈六边形的棒状结构,且纳米棒的取向垂直于衬底;XRD分析结果表明,随着Ag掺杂浓度的增加,ZnO纳米棒（0002）晶面的峰位向衍射角减小的方向移动,表明Ag⁺置换了ZnO晶格中的部分Zn²⁺后使其晶格常数略增加;随着Ag掺杂浓度的增加,ZnO纳米棒近带边发光峰发生一定的红移并且强度逐渐减弱,黄带发光峰逐渐增强,n-ZnO NRs/p-GaN异质结具有更好的传输效率。     

ZnAl2O4∶Mn4+材料的制备及发光性能

以共沉淀法与煅烧法联用,成功制备了一系列ZnAl₂O₄∶xMn⁴⁺样品。通过扫描电镜和X射线粉末衍射测试研究了样品的形貌和物相特征,结果表明尖晶石结构的ZnAl₂O₄中[AlO₆]的八面体位可以有效被Mn⁴⁺替代。通过荧光激发和发射光谱研究了样品的发光性能,发现Mn⁴⁺在ZnAl₂O₄体系中掺杂可以显示出明亮的红色发光(发射峰值位于680 nm处)。比较不同Mn⁴⁺浓度(Mn与Al的物质的量之比)掺杂样品的发光强度时发现,Mn⁴⁺最佳掺杂浓度为0.06%。通过德克斯特公式分析了发光强度与浓度关系,探究浓度猝灭机制,结果表明最邻近离子之间能量传递造成Mn⁴⁺浓度猝灭的发生。为了提高Mn⁴⁺的发光强度,选择了7种金属离子(Li⁺、Na⁺、K⁺、Ca²⁺、Sr²⁺、Sn²⁺和Ga³⁺)与Mn⁴⁺共掺杂进入ZnAl₂O₄基质中,其中效果较突出的为Li⁺和Ga³⁺,其共掺杂使Mn⁴⁺发光强度分别增强0.6倍和1倍。     

CaWO4:xEu3+,ySm3+,zLi+红色荧光粉的制备及光学性能

采用微波固相法制备了CaWO₄：xEu³⁺,ySm³⁺,zLi⁺红色荧光粉。测量样品的XRD图、激发谱、发射谱及发光衰减曲线,研究并分析了Eu³⁺、Sm³⁺、Li⁺的掺杂浓度,对样品微结构、光致发光特性、能量传递及能级寿命的影响。结果表明,Eu³⁺、Sm³⁺、Li⁺掺杂并未引起合成粉体改变晶相,仍为CaWO₄单一四方晶系结构。Eu³⁺、Sm³⁺共掺样品中,Sm³⁺掺杂为3%时,Sm³⁺对Eu³⁺的能量传递最有效。Li⁺掺杂起到了助熔剂和敏化剂的作用,使样品发光更强。在394 nm激发下,与CaWO₄：3%Eu³⁺样品比较,3%Eu³⁺、3%Sm³⁺共掺CaWO₄及3%Eu³⁺、3%Sm³⁺、1%Li⁺共掺CaWO₄样品的发光分别增强2倍及2.4倍。同一激发波长下,单掺Eu³⁺样品寿命最短,Sm³⁺、Eu³⁺共掺样品随Sm³⁺浓度增加,寿命先减小后增加,且掺杂了Li⁺的样品比不掺Li⁺的样品⁵D₀能级寿命有所增加。     

Bi2O3掺杂对Ag(Nb0.8Ta0.2)O3陶瓷结构和介电性能的影响

本文研究了Bi₂O₃掺杂对Ag(Nb_0.8Ta_0.2)O₃陶瓷的结构和介电性能的影响。X射线衍射(XRD)结果表明,Bi₂O₃的掺杂可以使陶瓷中Ag⁺被还原并析出,且银析出的量随Bi₂O₃掺杂量的增加而不断增加,这可能源自于Bi³⁺对Ag⁺的取代。在一定范围内增大Bi₂O₃掺杂量可提高Ag(Nb_0.8Ta_0.2)O₃陶瓷的室温介电常数,降低介电损耗,并使温度系数向负值方向移动。当Bi₂O₃的掺杂量约为3.5wt%时,样品具有较大的介电常数(ε=672)和较小的介电损耗(tanδ=7.3×10^-4)。     

Gd2O3:Yb3+,Nd3+,Tm3+/SiO2/Ag纳米复合材料的合成及上转换发光性质

通过多步骤的化学法合成了Gd₂O₃：Yb³⁺,Nd³⁺,Tm³⁺/SiO₂/Ag纳米复合材料。利用XRD,TEM,EDS,XPS,CLSM等方法对样品进行表征。实验结果表明,具有低声子能、稳定的化学性质的Gd₂O₃作为上转换发光的基质,当掺杂的敏化剂Nd³⁺离子浓度为1.0%（n/n）,激活剂离子Tm³⁺浓度为0.5%（n/n）时,上转换发光强度达到最大值。此外,表面吸附的Ag纳米颗粒,由于表面等离激元共振耦合作用,使得上转换发光蓝光波段的强度增强1.70倍。     

Bi4-xEuxTi3-yMyO12（M=Fe，Co，Ni）纳米颗粒的制备及光学和磁学性能

三层结构的Aurivillius相的Bi_4-xEu_xTi_3-yM_yO₁₂（x=0~0.6;M=Fe/Co/Ni,y=0.01,0.02,0.04,0.06,0.08,0.10）纳米颗粒,是通过共沉淀法和后续的高温煅烧处理所制备的。利用XRD,SEM,PL,Raman,PPMS等方法对样品进行表征,研究了不同掺杂浓度下的产物的物相、形貌和性能等。实验结果表明,通过掺杂,发现纳米颗粒的粒径变小,形貌更均一,分散性也更好。通过对掺杂离子浓度的优化,发现Eu³⁺离子的掺杂浓度为x=0.4时,发光强度是最强的。此外,对Ti位进行了磁性离子（Fe³⁺,Co³⁺和Ni²⁺）的掺杂,实验结果发现随着掺杂的磁性离子浓度的减少,发光强度是逐渐增强,而且产物具有很好的铁磁性。     

Solvothermal Synthesis of M‐doped TiO2 Nanoparticles for Sonocatalysis of Methylene Blue and Methyl Orange (M = Cd,Ag, Fe,Ce, and Cu)

M‐doped TiO₂ nanoparticles were synthesized by a sol–gel‐assisted solvothermal method. X‐ray diffraction (XRD) , transmission electron microscopy (TEM) , and diffuse reflection spectroscopy (DRS) were used to characterize the as‐synthesized samples. The sonocatalytic performance of the specimens for methylene blue and methyl orange degradation was evaluated. XRD confirmed the formation of anatase as the unique phase in all samples. TEM showed that Cd, Cu, and Ce led to increased particle size in comparison to TiO₂ nanoparticles, whereas Fe and Ag had no considerable influence on this parameter. DRS confirmed the change in the absorption edge, and E _g values decreased in the range 4.6–1.2% by Cd, Ce, Fe, Cu, and Ag doping, respectively. Among the different dopants, only Cd and Ag improved the absorbance of UV –visible light, and only these samples induced sonodegradation of the dye models. It can be concluded that the improvement in the dye removal efficiency is not related to an increase in the crystallinity and/or a decrease in E _g, but only related to the increase in absorbance.     

Complexation in Binary Cd2[Fe(CN)6]–M(II) Systems (M = Mn,Co, Ni,Cu, Zn) in Gelatin-Immobilized Cadmium(II) Hexacyanoferrates(II)

Complexation processes that occur between cadmium(II) hexacyanoferrate(II) (Cd₂[Fe(CN)₆]) and 3d-metal ions M(II) (M = Mn, Co, Ni, Cu, Zn) in thin gelatin layers with the immobilized cadmium(II) hexacyanoferrates when brought in contact with aqueous solutions of d-metal chlorides are studied. Cd²⁺ ions were found to be replaced to some extent by M²⁺ ions of the indicated d metals (except for Mn(II)) and form binuclear (dd)-metal hexacyanoferrates(II). A complete replacement of Cd(II) and formation of M₂[Fe(CN)₆] was observed in none of the cases.     

Synthesis,characterization, computational studies and biological activities of Co(II), Ni(II) and Cu(II) complexes of 2-Amino-1,3,4-thiadiazole derivatives

Abstract

Co(II), Ni(II), and Cu(II) complexes of 2-Amino-5-ethyl-1,3,4-thiadiazole (AET) and 2-Amino-5-(ethylthio)-1,3,4-thiadiazole (AEST) have been synthesized and characterized based on elemental analysis, magnetic susceptibility, infrared (4000–400 cm^?1), mass spectrometry (ESI and MALDI), UV–Vis (200–1100 nm) and thermal analysis (TGA/DTA). Molar conductance measurements proved that [M(L)₂(H₂O)₂]Cl₂·H₂O are electrolytic complexes where M represents Co, Ni, and Cu divalent metal ions. The geometrical isomerism of [M(L)₂(H₂O)₂]²⁺ ions were investigated by DFT-B3LYP calculations incorporated in Gaussian09 package; it favored the all trans isomers due to having the lowest energy points on the potential energy surface. The outcome of DFT-B3LYP quantum mechanical calculations using 6-31G(d) basis set favor six-coordinate sites via a bidentate ligand through exo amino and adjacent endo thiadiazole nitrogen (N₃) donors. These results were consistent with magnetic measurements combined with infrared and UV–Vis spectral interpretations. The predicted metal–ligand binding energies from B3LYP/6-31G(d) calculations follow the trend Cu²⁺>Ni²⁺>Co²⁺, in agreement with the Irving–Williams series. Both AET and AEST ligands and the synthesized complexes were screened for their antibacterial activity and the outcome was high antimicrobial activity of the complexes compared to the free ligands against one or more microbial species and in some cases (copper complexes) higher activity than standard drugs.     

Cd2Cu(PO4)2

During an investigation of the insufficiently known system M1O–M2O–X₂O₅–H₂O (M1 = Cd²⁺, Sr²⁺ and Ba²⁺; M2 = Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺ and Mg²⁺; X = P⁵⁺, As⁵⁺ and V⁵⁺), single crystals of the novel compound dicadmium copper(II) bis[phosphate(V)], Cd₂Cu(PO₄)₂, were obtained. This compound belongs to a small group of compounds adopting a Cu₃(PO₄)₂‐type structure and having the general formula M1₂M2(XO₄)₂ (M1/M2 = Cd²⁺, Cu²⁺, Mg²⁺ and Zn²⁺; X = As⁵⁺, P⁵⁺ and V⁵⁺). The crystal structure is characterized by the interconnection of infinite [Cu(PO₄)₂]_n chains and [Cd₂O₁₀]_n double chains, both extending along the a axis. Exceptional characteristics of this structure are its novel chemical composition and the occurrence of double chains of CdO₆ polyhedra that were not found in related structures. In contrast to the isomorphous compounds, where the M1 cations are coordinated by five O atoms, the Cd atom is coordinated by six. The dissimilarity in the geometry of M1 coordination between Cd₂Cu(PO₄)₂ and the isomorphous compounds is mostly due to the larger ionic radius of the Cd cation in comparison with the Cu, Mg and Zn cations. Sharing a common edge, two CdO₆ polyhedra form Cd₂O₁₀ dimers. Each such dimer is bonded to another dimer sharing common vertices, forming [Cd₂O₁₀]_n double chains in the [100] direction. The Cu atoms, located on an inversion centre (site symmetry ), form isolated CuO₄ squares interconnected by PO₄ tetrahedra, forming [Cu(PO₄)₂]_n chains similar to those found in related structures. Conversely, the [Cd₂O₁₀]_n double chains, which were not found in related structures, are an exclusive feature of this structure.     

Natural monoclinic AgPb(Bi2Sb)3S6, an Sb‐rich gustavite

The crystal structure of the Sb‐rich variety of the mineral gustavite, silver lead tris(dibismuth/antimony) hexasulfide, AgPb(Bi₂Sb)₃S₆, consists of blocks of diagonal chains of four octahedra, viz. M1a (Bi), M2a (Sb/Bi), M2b (Bi/Sb) and M1b (Ag), separated by Pb atoms in a trigonal prismatic coordination. Two marginal octahedral sites, M1a and M1b, where the gustavite substitution Ag⁺ + Bi³⁺ = 2Pb²⁺ takes place, are formed by Bi and Ag, respectively. Two central octahedra, M2a and M2b, where the Bi³⁺ = Sb³⁺ substitution takes place, are formed by two mixed Bi/Sb sites with different occupancies of Bi and Sb. The alternating occupation of the M1 site by Bi and Ag atoms (which thus creates two distinct sites M1a and M1b) results in the monoclinic space group P2₁/c. A statistical distribution of Ag/Bi in the M1 position (one mixed Ag/Bi site) was reported for synthetic gustavite, resulting in the orthorhombic space group Cmcm.     

Synthese,Kristallstruktur und elektronische Bandstruktur der isotypen Sulfidchloride CuBiSCl2 und AgBiSCl2

Synthesis, Crystal Structure and Electronic Band Structure of the Isostructural Sulfide Chlorides CuBiSCl₂ and AgBiSCl₂ Black, platelet crystals of MBiSCl₂ (M = Cu, Ag) were synthesized by heating stoichiometric amounts of MCl and BiSCl. X‐ray diffraction on powders and single‐crystals revealed that the compounds crystallize isostructural with space group Cmcm (Cu/Ag: a = 396.9(1)/397.1(1); b = 1278.6(3)/1371.2(3); c = 859.7(2)/882.4(2) pm). In the crystal structures the Bi^III cations have a bi‐capped trigonal prismatic coordination of two sulfide and six chloride ions. The polyhedra constitute layers equation/tex2gif-stack-2.gif[BiS_2/2Cl_6/3^—] by sharing common edges and faces. The layers are separated by transition metal cations M^I. Their distorted octahedral coordination comprises two short bonds M—S in trans position and four M—Cl bonds that are about 50 pm longer. From relativistic band structure calculations (DFT) is deduced that AgBiSCl₂ is an indirect semi‐conductor with a band gap of about 1.0 eV.     

The development of a method for the determination of trace elements in fuel alcohol by ETV-ICP-MS using isotope dilution calibration

A method for the determination of Ag, Cd, Cu, Pb and Tl in fuel alcohol by isotope dilution electrothermal vaporization inductively coupled plasma mass spectrometry (ID ETV-ICP-MS) is proposed. The analytes were separated in two groups: Ag and Cu were determined without modifier and Cd, Pb and Tl with the use of Pd as chemical modifier. The employed ETV operational conditions were pyrolysis temperature of 800 °C for Cd, Pb and Tl and of 900 °C for Ag and Cu and vaporization temperature of 2400 °C for both groups. Seven common, one with additive and one anhydrous fuel ethanol samples were analyzed. The spiked and reference isotopes were, respectively, ¹⁰⁹Ag and ¹⁰⁷Ag, ¹¹²Cd and ¹¹¹Cd, ⁶³Cu and ⁶⁵Cu, ²⁰⁶Pb and ²⁰⁸Pb and ²⁰³Tl and ²⁰⁵Tl. The added amounts of the enriched isotope material were the same for all samples: 4.6 ng of ¹⁰⁹Ag, 5 ng of ¹¹²Cd, 21.1 ng of ⁶³Cu, 9 ng of ²⁰⁶Pb and 0.21 ng of ²⁰³Tl. The blank was bi-distilled ethanol, acidified with 0.3% (v/v) nitric acid, as the samples. The limits of detection (LODs) were calculated as three times the standard deviation of the concentrations in the blank (n = 10) and were, in μg L⁻¹, for Ag: 0.02, for Cd: 0.08, for Cu: 0.1, for Pb: 0.05 and for Tl: 0.001. The obtained concentrations in the samples were in agreement with those obtained by external calibration (EC), according to the paired t-test. The isotope dilution (ID) showed to be a robust, fast and simple calibration technique for the analysis of fuel ethanol.     

Preparation,IR Characterization and Thermal Properties of Some Metal Complexes of Isatin-3-oxime

The synthesis and characterization of Co(II), Ni(II), Cu(II), Zn(II), Ag(I), Cd(II) and Hg(II) complexes of isatin-3-oxime (H₂OXI) are reported. Elemental analysis, infrared spectroscopy, thermal analysis and X-ray powder diffraction were used to characterize the complexes. The IR spectral data show that the ligand behaves in a monodentate or a bidentate manner in the different complexes. The compositions of the prepared complexes were Ag(HOXI), Hg(OXI) and M(HOXI)₂ for M=Co(II), Ni(II), Cu(II), Zn(II) and Cd(II).This revised version was published online in November 2005 with corrections to the Cover Date.     

Structural Influence of Lone Pairs in GeP2N4, a Germanium(II) Nitridophosphate

Owing to their widespread properties, nitridophosphates are of high interest in current research. Explorative high-pressure high-temperature investigations yielded various compounds with stoichiometry MP₂N₄ (M=Be, Ca, Sr, Ba, Mn, Cd), which are discussed as ultra-hard or luminescent materials, when doped with Eu²⁺. Herein, we report the first germanium nitridophosphate, GeP₂N₄, synthesized from Ge₃N₄ and P₃N₅ at 6 GPa and 800 °C. The structure was determined by single-crystal X-ray diffraction and further characterized by energy-dispersive X-ray spectroscopy, density functional theory calculations, IR and NMR spectroscopy. The highly condensed network of PN₄-tetrahedra shows a strong structural divergence to other MP₂N₄ compounds, which is attributed to the stereochemical influence of the lone pair of Ge²⁺. Thus, the formal exchange of alkaline earth cations with Ge²⁺ may open access to various compounds with literature-known stoichiometry, however, new structures and properties.