Vapor Composition over Solid Indium Trichloride and in ­Indium Chloride Unsaturated Vapor

The dependence of indium trichloride saturated and unsaturated vapor pressure on temperature was studied in the range of 630–950 K by static methods using a quartz membrane zero‐manometer and taking into account the volume of its working chamber and substance mass. The thermodynamic data on the process of dissociation of dimeric molecules and sublimation of monomer and dimer from solid indium trichloride were calculated: ΔH⁰_subl InCl₃(g)₂₉₈ = 155.3 ± 6.2 kJ · mol^–1; ΔS⁰_subl InCl₃(g)₂₉₈ = 199.5 ± 7.9 J · mol^–1 · K^–1; ΔH⁰_subl In₂Cl₆(g)₂₉₈ = 159.3 ± 6.2 kJ · mol^–1; ΔS⁰_subl In₂Cl₆(g)₂₉₈ = 207.1±3.8 J · mol^–1 · K^–1; ΔH⁰_dis In₂Cl₆(g)₂₉₈ = 152.6 ± 5.5 kJ · mol^–1 and ΔS⁰_dis In₂Cl₆(g)₂₉₈ = 171.6 ± 5.2 J · mol^–1 · K^–1. The saturated vapor over solid indium trichloride consists mainly of a mixture of monomeric and dimeric molecules (InCl₃ and In₂Cl₆), and the content of the latter is slightly growing with increasing temperature.     

Zur Bedeutung von V2O3(OH)4(g) für den chemischen Transport von V2O5(s) in Anwesenheit von Wasser. Nachweis des Gasteilchens,thermodynamische Daten und Modellrechnungen

V₂O₃(OH)₄(g), Proof of Existence, Thermochemical Characterization, and Chemical Vapor Transport Calculations for V₂O₅(s) in the Presence of Water By use of the Knudsen-cell mass spectrometry the existence of V₂O₃(OH)₄(g) is shown. For the molecules V₂O₃(OH)₄(g), V₄O₁₀(g), and V₄O₈(g) thermodynamic properties were calculated by known Literatur data. The influence of V₂O₃(OH)₄(g) for chemical vapor transport reactions of V₂O₅(s) with water ist discussed. Δ_BH°(V₂O₃(OH)₄(g), 298) = –1920 kJ · mol^–1 and S°(V₂O₃(OH)₄(g), 298) = 557 J · K^–1 · mol^–1, Δ_BH°(V₄O₁₀(g), 298) = –2865,6 kJ · mol^–1 and S°(V₄O₁₀(g), 298) = 323.7 J · K^–1 · mol^–1, Δ_BH°(V₄O₈(g), 298) = –2465 kJ · mol^–1 and S°(V₄O₈(g), 298) = 360 J · K^–1 · mol^–1.     

Eine neue Methode zur Messung von temperaturabhängigen Partialdrücken in geschlossenen Systemen. Die Bestimmung der Bildungsenthalpie und -entropie von PtI2(s)

Determination of Temperature Dependent Partial Pressures in Closed Systems – a New Method. The Heat of Formation for PtI₂(s) A new method to determine temperature dependent partial pressures of gaseous species in equilibria with condensed phases in closed systems (silica ampoules) at temperatures up to 1000 °C and pressures p_i 0.01 < p_i < 10 bar is presented. It is based on the determination of the change of mass in the gasphase caused by solid-gas transition at higher temperatures of substances which are deposited at one end of the ampoule. The results of the measurements give informations about reaction mechanisms, enthalpies and entropies. The reliability of the method is demonstrated at the example of the system Pt/I₂. The heat of formation and the entropy of PtI₂(s) (δ_BH°(PtI₂(s), 298) = –51.4 kJ · mol^–1, S°(PtI₂(s), 298) = 119.3 J · K^–1 · mol^–1) are computed from experimental results. The heat of thermal decomposition of PtI₂(s) was reconsidered by Knudsen Mass Spectrometry.     

A laser flash photolysis kinetic study of reactions of the Cl2− radical anion with oxygenated hydrocarbons in aqueous solution

A laser photolysis–long path laser absorption (LP‐LPLA) experiment has been used to determine the rate constants for H‐atom abstraction reactions of the dichloride radical anion (Cl₂⁻) in aqueous solution. From direct measurements of the decay of Cl₂⁻ in the presence of different reactants at pH = 4 and I = 0.1 M the following rate constants at T = 298 K were derived: methanol, (5.1 ± 0.3)·10⁴ M⁻¹ s⁻¹; ethanol, (1.2 ± 0.2)·10⁵ M⁻¹ s⁻¹; 1‐propanol, (1.01 ± 0.07)·10⁵ M⁻¹ s⁻¹; 2‐propanol, (1.9 ± 0.3)·10⁵ M⁻¹ s⁻¹; tert.‐butanol, (2.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; formaldehyde, (3.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; diethylether, (4.0 ± 0.2)·10⁵ M⁻¹ s⁻¹; methyl‐tert.‐butylether, (7 ± 1)·10⁴ M⁻¹ s⁻¹; tetrahydrofuran, (4.8 ± 0.6)·10⁵ M⁻¹ s⁻¹; acetone, (1.41 ± 0.09)·10³ M⁻¹ s⁻¹. For the reactions of Cl₂⁻ with formic acid and acetic acid rate constants of (8.0 ± 1.4)·10⁴ M⁻¹ s⁻¹ (pH = 0, I = 1.1 M and T = 298 K) and (1.5 ± 0.8) · 10³ M⁻¹ s⁻¹ (pH = 0.42, I = 0.48 M and T = 298 K), respectively, were derived. A correlation between the rate constants at T = 298 K for all oxygenated hydrocarbons and the bond dissociation energy (BDE) of the weakest C‐H‐bond of log k_2nd = (32.9 ± 8.9) − (0.073 ± 0.022)·BDE/kJ mol⁻¹ is derived. From temperature‐dependent measurements the following Arrhenius expressions were derived: k (Cl₂⁻ + HCOOH) = (2.00 ± 0.05)·10¹⁰·exp(−(4500 ± 200) K/T) M⁻¹ s⁻¹, E_a = (37 ± 2) kJ mol⁻¹ k (Cl₂⁻ + CH₃COOH) = (2.7 ± 0.5)·10¹⁰·exp(−(4900 ± 1300) K/T) M⁻¹ s⁻¹, E_a = (41 ± 11) kJ mol⁻¹ k (Cl₂⁻ + CH₃OH) = (5.1 ± 0.9)·10¹²·exp(−(5500 ± 1500) K/T) M⁻¹ s⁻¹, E_a = (46 ± 13) kJ mol⁻¹ k (Cl₂⁻ + CH₂(OH)₂) = (7.9 ± 0.7)·10¹⁰·exp(−(4400 ± 700) K/T) M⁻¹ s⁻¹, E_a = (36 ± 5) kJ mol⁻¹ Finally, in measurements at different ionic strengths (I) a decrease of the rate constant with increasing I has been observed in the reactions of Cl₂⁻ with methanol and hydrated formaldehyde. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 169–181, 1999     

Calculation of Some Thermodynamic Properties and Detonation Parameters of 1‐Ethyl‐3‐Methyl‐H‐Imidazolium Perchlorate, [Emim][ClO4], on the Basis of CBS‐4M and CHEETAH Computations Supplemented by VBT Estimates

This paper estimates some thermochemical (in kcal mol^–1) and detonation parameters for the ionic liquid, [emim][ClO₄] and its associated solid in view of its investigation as an energetic material. The thermochemical values estimated, employing CBS‐4M computational methodology and volume‐based thermodynamics (VBT) include: lattice energy, U_POT([emim][ClO₄]) ≈? 123 ± 16 kcal · mol^–1; enthalpy of formation of the gaseous cation, Δ_fH°([emim]⁺, g) = 144.2 kcal · mol^–1 and anion, Δ_fH°([ClO₄]^–, g) = –66.1 kcal · mol^–1; the enthalpy of formation of the solid salt, Δ_fH°([emim][ClO₄],s) ≈? –55 ± 16 kcal · mol^–1 and for the associated ionic liquid, Δ_fH^o([emim][ClO₄],l) = –52 ± 16 kcal · mol^–1 as well as the corresponding Gibbs energy terms: Δ_fG°([emim][ClO₄],s) ≈? +29 ± 16 kcal · mol^–1 and Δ_fG^o([emim][ClO₄],l) = +24 ± 16 kcal · mol^–1 and the associated standard absolute entropies, of the solid [emim][ClO₄], S°₂₉₈([emim][ClO₄],s) = 83 ± 4 cal · K^–1 · mol^–1. The following combustion and detonation parameters are assigned to [emim][ClO₄] in its (ionic) liquid form: specific impulse (I_sp) = 228 s (monopropellant), detonation velocity (V_oD) = 5466 m · s^–1, detonation pressure (p_C–J) = 99 kbar, explosion temperature (T_ex) = 2842 K.     

Reactions of the fluorobromocarbene radical studied by laser-induced fluorescence

CFBr radicals produced by the reaction of atomic oxygen with F₂CCFBr were monitored in a discharge flow system by fluorescence excited at 424 nm. The rate coefficients for reactions of the CFBr radicals were measured between 298 and 358 K, and the following values were obtained in units of cm³/molec·s: O₂ < 2 × 10^?16 at 353 K; NO < 10^?14 at 298 K; F₂CCFBr < 10^?15 at 298 K; Cl₂ (1.9 ± 0.6) × 10^?12 exp(?762 ± 92/T) Br₂ (1.4 ± 0.3) × 10^?12 exp(?533 ± 62/T).     

On the Existence of the Trimer of Gallium Trichloride in the Gaseous Phase

The dependence of the gallium trichloride saturated and unsaturated vapor pressures on temperature was studied by the static method using a quartz membrane zero‐manometer and taking into account the volume of its working chamber and substance mass. Conclusions about the presence of a distinguishable amount of trimeric molecules along with dimeric and momomeric molecules in the vapor were drawn on the basis of the obtained data. The following rough thermodynamic characteristics of a gaseous trimer of gallium trichloride were calculated: Δ_fH° (Ga₃Cl₉, gas, 298 K) = –1466 kJ · mol^–1. S°(Ga₃Cl₉, gas, 298 K) = 654 J · mol^–1 · K^–1. These data were used to elucidate the composition of the gaseous phase at a total pressure of 1 atm in the temperature range of 400–750 K. The suggested existence of trimeric molecules was not contradicted by vibrational spectroscopic analysis of gallium trichloride saturated vapor.     

Synthesis and Properties of [Ba(CHZ)(BT)(H2O)2]n as a New Energetic Coordination Compound

In order to enhance the thermal stability of the barium salt of 5,5′‐bistetrazole (H₂BT), carbohydrazide (CHZ) was used to build [Ba(CHZ)(BT)(H₂O)₂]_n as a new energetic coordination compound by using a simple aqueous solution method. It was characterized by FT‐IR spectroscopy, elemental analysis, and single‐crystal X‐ray diffraction. The crystal belongs to the monoclinic P2₁/c space group [a = 8.6827(18) Å, b = 17.945(4) Å, c = 7.2525 Å, β = 94.395(2)°, V = 1126.7(4) ų, and ρ = 2.356 g · cm^–3]. The Ba^II cation is ten‐coordinated with one BT^2–, two shared carbohydrazides, and four shared water molecules. The thermal stabilities were investigated by differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). The dehyration temperature (T_dehydro) is at 187 °C, whereas the decomposition temperature (T_d) is 432 °C. Non‐isothermal reaction kinetics parameters were calculated by Kissinger's method and Ozawa's method to work out E_K = 155.2 kJ · mol^–1, lgA_K = 9.25, and E_O = 158.8 kJ · mol^–1. The values of thermodynamic parameters, the peak temperature (while β → 0) (T_p0 = 674.85 K), the critical temperature of thermal explosion (T_b = 700.5 K), the free energy of activation (ΔG^≠ = 194.6 kJ · mol^–1), the entropy of activation (ΔS^≠ = –66.7 J · mol^–1), and the enthalpy of activation (ΔH^≠ = 149.6 kJ · mol^–1) were obtained. Additionally, the enthalpy of formation was calculated with density functional theory (DFT), obtaining Δ_fH°₂₉₈ ≈ 1962.6 kJ · mol^–1. Finally, the sensitivities toward impact and friction were assessed according to relevant methods. The result indicates the compound as an insensitive energetic material.     

ab initio calculations and thermochemical analysis on C1 atom abstractions of chlorine from chlorocarbons and the reverse alkyl abstractions: Cl2 + R· ↔ Cl· + RCl

Thermodynamic properties (ΔH°_f(298), S°₍₂₉₈₎ and Cp(T) from 300 to 1500 K) for reactants, adducts, transition states, and products in reactions of CH₃ and C₂H₅ with Cl₂ are calculated using CBSQ//MP2/6‐311G(d,p). Molecular structures and vibration frequencies are determined at the MP2/6‐311G(d,p), with single‐point calculations for energy at QCISD(T)/6‐311 + G(d,p), MP4(SDQ)/CbsB4, and MP2/CBSB3 levels of calculation with scaled vibration frequencies. Contributions of rotational frequencies for S°₍₂₉₈₎ and Cp(T)'s are calculated based on rotational barrier heights and moments of inertia using the method of Pitzer and Gwinn [1]. Thermodynamic parameters, ΔH°_f(298), S°₍₂₉₈₎, and C_P(T), are evaluated for C₁ and C₂ chlorocarbon molecules and radicals. These thermodynamic properties are used in evaluation and comparison of Cl₂ + R· → Cl· + RCl (defined forward direction) reaction rate constants from the kinetics literature for comparison with the calculations. Data from some 20 reactions in the literature show linearity on a plot of Ea_fwd vs. ΔH_rxn,fwd, yielding a slope of (0.38 ± 0.04) and intercept of (10.12 ± 0.81) kcal/mole. A correlation of average Arrhenius preexponential factor for Cl· + RCl → Cl₂ + R· (reverse rxn) of (4.44 ± 1.58) × 10¹³ cm³/mol‐sec on a per‐chlorine basis is obtained with Ea_Rev = (0.64 ± 0.04) × ΔH_rxn,Rev + (9.72 ± 0.83) kcal/mole, where Ea_Rev is 0.0 if ΔH_rxn,Rev is more than 15.2 kcal/mole exothermic. Kinetic evaluations of literature data are also performed for classes of reactions. Ea_fwd = (0.39 ± 0.11) × ΔH_rxn,fwd + (10.49 ± 2.21) kcal/mole and average A_fwd = (5.89 ± 2.48) × 10¹² cm³/mole‐sec for hydrocarbons: Ea_fwd = (0.40 ± 0.07) × ΔH_rxn,fwd + (10.32 ± 1.31) kcal/mole and average A_fwd = (6.89 ± 2.15) × 10¹¹ cm³/mole‐sec for C₁ chlorocarbons: Ea_fwd = (0.33 ± 0.08) × ΔH_rxn,fwd + (9.46 ± 1.35) kcal/mole and average A_fwd = (4.64 ± 2.10) × 10¹¹ cm³/mole‐sec for C₂ chlorocarbons. Calculation results on the methyl and ethyl reactions with Cl₂ show agreement with the experimental data after an adjustment of +2.3 kcal/mole is made in the calculated negative Ea's. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 548–565, 2000     

Mutual combination of ClO radicals

The mutual combination reaction is proposed as the rate-limiting step in the removal of ClO radicals at moderate pressures. The third--order rate constants measured at room temperature were k₁(Ar) = 3.51 ± 0.14 × 10⁹ l²/mol²·ec; k₁(He) ≈ 2.8 × 10⁹ l²/mol²·sec, and k₁(O₂) ≈ 7.9 × 10⁹ l²/mol²·sec. There is also an independent second-order reaction for which k₃ ≈ 8 × 10⁶ l/mol·sec. A new absorption spectrum has been observed in the ultraviolet and attributed to Cl₂O₂. The extinction coefficient for Cl₂O₂ has been measured at six wavelengths, and, between 292 and 232 nm, it increases from 0.4 × 10³ to 2.9 × 10³ l/mol·cm. In the presence of the chlorine atom scavengers OClO or Cl₂O, Cl₂O₂ exists in equilibrium with ClO. The equilibrium constant Ke₁ = 3.1 ± 0.1 × 10⁶ l/mol at 298 K, and, with ΔS₁⁰ estimated to be ?133 ± 11 J/K·mol, ΔH₁⁰ = ?69 ± 3 kJ/mol and ΔH_f⁰(Cl₂O₂) = 136 ± 3 kJ/mol.     

Darstellung und Schwingungsspektren von Chloro-Bromo-Dirhodaten(III), [Rh2ClnBr9−n]3−, n = 0–9

Preparation and Vibrational Spectra of Nonahalogenodirhodates(III), [Rh₂Cl_nBr_9-n]^3?, n = 0–9 The pure nonahalogenodirhodates(III), A₃[Rh₂Cl_nBr_9-n], A = K, Cs, (TBA); n = 0–4, 9, have been prepared. They are formed from the monomer chlorobromorhodates(III), [RhCl_nBr_6-n]^3?, n = 0–6, which are bridged to confacial bioctahedral complexes by ligand abstraction in less polar organic solvents. From the mixtures the complexions are separated by ion exchange chromatography on DEAE-cellulose. The solid, air-stable, air-stable, K-, Cs- and (TBA)-salts of [Rh₂Cl_nBr_9-n]^3?, n = 0–4, are green, of [Rh₂Cl₉]^3? are brown. The IR and Raman spectra of [Rh₂Br₉]^3? and [Rh₂Cl₉]^3? are assigned according to the point group D_3h. The chlorobromodirhodates exist as mixtures of geometrical and structural isomers, which belong to different point groups. The vibrational spectra exhibit bands in characteristic regions; at high wavenumbers stretching vibrations with terminal ligands v(Rh—Cl_t): 360–320, v(Rh—Br_t): 280–250; in a middle region with bridging ligands v(Rh—Cl_b): 300–270, v(Rh—Br_b): 210–170 cm^?1; the deformation bands are observed at distinct lower frequencies. The terminal ligands are fixed very strong, and the distance between v(Rh—X_t) and v(Rh—X_b) increases with decreasing size of the cations.     

Hydroxo‐bridged Tetranuclear CuII Complexes: {[Cu(bpy)(OH)]4Cl2}Cl2 · 6 H2O and {[Cu(phen)(OH)]4(H2O)2}]Cl4 · 4 H2O

The blue tetranuclear Cu^II complexes {[Cu(bpy)(OH)]₄Cl₂}Cl₂ · 6 H₂O ( 1 ) and {[Cu(phen)(OH)]₄(H₂O)₂}Cl₄ · 4 H₂O ( 2 ) were synthesized and characterized by single crystal X‐ray diffraction. ( 1 ): P 1 (no. 2), a = 9.240(1) Å, b = 10.366(2) Å, c = 12.973(2) Å, α = 85.76(1)°, β = 75.94(1)°, γ = 72.94(1)°, V = 1152.2(4) ų, Z = 1; ( 2 ): P 1 (no. 2), a = 9.770(3) Å, b = 10.118(3) Å, c = 14.258(4) Å, α = 83.72(2)°, β = 70.31(1)°, γ = 70.63(1)°, V = 1252.0(9) ų, Z = 1. The building units are centrosymmetric tetranuclear {[Cu(bpy)(OH)]₄Cl₂}²⁺ and {[Cu(phen)(OH)]₄(H₂O)₂}⁴⁺ complex cations formed by condensation of four elongated square pyramids CuN₂(OH)₂L^ap with the apical ligands L^ap = Cl, H₂O, OH. The resulting [Cu₄(μ₂‐OH)₂(μ₃‐OH)₂] core has the shape of a zigzag band of three Cu₂(OH)₂ squares. The cations exhibit intramolecular and intermolecular π‐π stacking interactions and the latter form 2D layers with the non‐bonded Cl^– anions and H₂O molecules in between (bond lengths: Cu–N = 1.995–2.038 Å; Cu–O = 1.927–1.982 Å; Cu–Cl^ap = 2.563; Cu–O^ap(OH) = 2.334–2.369 Å; Cu–O^ap(H₂O) = 2.256 Å). The Cu…Cu distances of about 2.93 Å do not indicate direct interactions, but the strongly reduced magnetic moment of about 2.74 B.M. corresponds with only two unpaired electrons per formula unit of 1 (1.37 B.M./Cu) and obviously results from intramolecular spin couplings (χ_m(T‐θ) = 0.933 cm³ · mol^–1 · K with θ = –0.7 K).     

Chemische und cyclovoltammetrische Untersuchung der Redoxreaktionen der Decahalogendecaborate closo‐[B10X10]2– und hypercloso‐[B10X10]· – (X = Cl,Br). Kristallstrukturanalyse von Cs2[B10Br10] · 2 H2O

Chemical and Cyclovoltammetric Investigation of the Redoxreactions of the Decahalodecaborates closo ‐[B₁₀X₁₀]^2– and hypercloso ‐[B₁₀X₁₀]^{· –} (X = Cl, Br)¹⁾. Crystal Structure Analysis of Cs₂[B₁₀Br₁₀] · 2 H₂O The oxidation of the decachloro‐closo‐decaborates(2–) Cs₂[B₁₀Cl₁₀] or [Me₄N]₂[B₁₀Cl₁₀] with Tl(CF₃COO)₃ leads to the corresponding radical monoanion hypercloso‐[B₁₀Cl₁₀] ^{· –}, which was characterized by ESR and UV/Vis spectroscopy. [B₁₀Cl₁₀] ^{· –} does not dimerize like [B₁₀H₁₀] ^{· –} but it is reduced by acetonitrile to the dianion [B₁₀Cl₁₀]^2–. Cs₂[B₁₀Cl₁₀] reacts with stronger oxidation agents like CoF₃ (in dichloromethane) or XeF₂ (in perfluorhexane), respectively, to yield B₉Cl₉ and, in traces, B₈Cl₈. In opposite to this, the decabromoderivative Cs₂[B₁₀Br₁₀] does not show any reaction with Tl(CF₃COO)₃ in acetonitrile or with CoF₃ in CH₂Cl₂. The oxidation of the dianions [B₁₀X₁₀]^2– (X = Cl, Br) was studied by electroanalytical methods (cyclic voltammetry, chronoamperometry, chronocoulometry). Formal potentials were determined for the two steps of the reaction, which do not seem to be affected by structural rearrangements. The crystal structure of Cs₂[B₁₀Br₁₀] · 2 H₂O was analyzed by single‐crystal X‐ray diffraction. Cs₂[B₁₀Br₁₀] · 2 H₂O crystallizes monoclinic (space group I2/a, (no. 15), Z = 8, a = 1361.54(9) pm, b = 1215.89(5) pm, c = 3108.4(2) pm, α = 90°, β = 97.916(8)°, γ = 90°). The closo‐cluster B₁₀Br₁₀^2– has a bicapped square antiprismatic structure with idealized D_4d symmetry.     

A calorimetric and thermodynamic investigation of A2[(UO2)2(MoO4)O2] compounds with A = K and Rb and calculated phase relations in the system (K2MoO4 + UO3 + H2O)

A calorimetric and thermodynamic investigation of two alkali-metal uranyl molybdates with general composition A₂[(UO₂)₂(MoO₄)O₂], where A = K and Rb, was performed. Both phases were synthesized by solid-state sintering of a mixture of potassium or rubidium nitrate, molybdenum (VI) oxide and gamma-uranium (VI) oxide at high temperatures. The synthetic products were characterised by X-ray powder diffraction and X-ray fluorescence methods. The enthalpy of formation of K₂[(UO₂)₂(MoO₄)O₂] was determined using HF-solution calorimetry giving Δ_fH° (T = 298 K, K₂[(UO₂)₂(MoO₄)O₂], cr) = −(4018 ± 8) kJ · mol⁻¹. The low-temperature heat capacity, С_р°, was measured using adiabatic calorimetry from T = (7 to 335) K for K₂[(UO₂)₂(MoO₄)O₂] and from T = (7 to 326) K for Rb₂[(UO₂)₂(MoO₄)O₂]. Using these С_р° values, the third law entropy at T = 298.15 K, S°, is calculated as (374 ± 1) J · K⁻¹ · mol⁻¹ for K₂[(UO₂)₂(MoO₄)O₂] and (390 ± 1) J · K⁻¹ · mol⁻¹ for Rb₂[(UO₂)₂(MoO₄)O₂]. These new experimental results, together with literature data, are used to calculate the Gibbs energy of formation, Δ_fG°, for both phases giving: Δ_fG° (T = 298 K, K₂[(UO₂)₂(MoO₄)O₂], cr) = (−3747 ± 8) kJ · mol⁻¹ and Δ_fG° (T = 298 K, Rb₂[(UO₂)₂(MoO₄)], cr) = −3736 ± 5 kJ · mol⁻¹. Smoothed С_р°(Т) values between 0 K and 320 K are presented, along with values for S° and the functions [H°(T) − H°(0)] and [G°(T) − H°(0)], for both phases. The stability behaviour of various solid phases and solution complexes in the (K₂MoO₄ + UO₃ + H₂O) system with and without CO₂ at T = 298 K was investigated by thermodynamic model calculations using the Gibbs energy minimisation approach.     

Synthesis and Structural Characterization of Six Pentanuclear and Tetranuclear Mo/W‐Cu‐S Clusters with Bis(diphenylphosphanyl) Methane

Six heterothiometalic clusters, namely, [WS₄Cu₄(dppm)₄](ClO₄)₂ · 2DMF · MeCN ( 1 ), [MoS₄Cu₄(dppm)₄](NO₃)₂ · MeCN ( 2 ) [MoS₄Cu₃(dppm)₃](ClO₄) · 4H₂O ( 3 ), [WS₄Cu₃(dppm)₃](NO₃) · 4H₂O ( 4 ), [WS₄Cu₃(dppm)₃]SCN · CH₂Cl₂ ( 5 ), and [WS₄Cu₃(dppm)₃]I · CH₂Cl₂ ( 6 ) [dppm = bis (diphenylphosphanyl)methane] were synthesized. Compounds 1 – 4 were obtained by the reactions of (NH₄)₂MS₄ (M = Mo, W) with [Cu₂(μ₂‐dppm)₂(MeCN)₂(ClO₄)₂] {or [Cu(dppm)(NO₃)]₂} in the presence of 1,10‐phen in mixed solvent (CH₃CN/CH₂Cl₂/DMF for 1 and 2 , CH₂Cl₂/CH₃OH/DMF for 3 and 4 . Compounds 5 and 6 were obtained by one‐pot reactions of (NH₄)₂WS₄ with dppm and CuSCN (or CuI) in CH₂Cl₂/CH₃OH. These clusters were characterized by single‐crystal X‐ray diffraction as well as IR, ¹H NMR, and ³¹P NMR spectroscopy. Structure analysis showed that compounds 1 and 2 are “saddle‐shaped” pentanuclear cationic clusters, whereas compounds 3 – 6 are “flywheel‐shaped” tetranuclear cationic clusters. In 1 and 2 , the MS₄^2– unit (M = W, Mo) is coordinated by four copper atoms, which are further bridged by four dppm molecules. In compounds 3 – 6 , the MS₄^2– unit is coordinated by three copper atoms and each copper atom is bridged by three dppm ligands.     

[Fc2B2(Br)(μ‐NPEt3)2]+Br– – ein Ferrocenyl‐substituierter Phosphaniminato‐Komplex des Bors

[Fc₂B₂(Br)(μ‐NPEt₃)₂]⁺Br^– – a Ferrocenyl‐substituted Phosphoraneiminato Complex of Boron [Fc₂B₂(Br)(μ‐NPEt₃)₂]⁺Br^– has been prepared from ferrocenylboron dibromide, [Fe(η⁵‐C₅H₅)(η⁵‐C₅H₄BBr₂)], and the silylated phosphoraneimine Me₃SiNPEt₃ in dichloromethane solution to give orange‐red single crystals which were characterized by IR, NMR and ⁵⁷Fe Mössbauer spectra, as well as by a crystal structure determination. [Fc₂B₂(Br)(μ‐NPEt₃)₂]⁺Br^– · 3 CH₂Cl₂ ( 1 · 3 CH₂Cl₂): Space group P2₁/n, Z = 4, lattice dimensions at –50 °C: a = 1370.6(3), b = 2320.9(5), c = 1454.4(2), β = 95.38(1)°, R₁ = 0.061. In the cation of 1 the ferrocenyl‐substituted boron atoms are connected by the nitrogen atoms of the [NPEt₃]^– groups to form a planar B₂N₂ four‐membered ring. One of the boron atoms having planar, the other tetrahedral coordination.     

Ni(II) and Pd(II) complexes bearing benzocyclohexane–ketoarylimine for copolymerization of norbornene with 5‐norbornene‐2‐carboxylic ester

A serial of late transition metal complexes, which bearing Benzocyclohexane–ketoarylimine ligand and named as Mt(benzocyclohexane–ketoarylimino)₂ {Mt(bchkai)₂: Mt=Ni or Pd; bchkai=C₁₀H₈(O)CN(Ar)CH₃; Ar=naphthyl or fluoryl}, have been synthesized and characterized. The molecular structures of the ligands and nickel complex have been confirmed by X‐ray single‐crystal analyses. The nickel complexes exhibited very high activity up to 2.7 × 10⁵ g_polymer/mol_Ni·h and palladium complexes showed high activity up to 2.3 × 10⁵ g_polymer/mol_Pd·h for norbornene (NB) homo‐polymerization with tris(pentafluorophenyl)borane as cocatalyst. The four complexes were effective for copolymerization of NB and 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃) in relatively high activities (0.1–2.4 × 10⁵ g_polymer/mol_Mt·h) and produced the addition‐type copolymers with relatively high molecular weights (0.5 × 10⁵–1.2 × 10⁵ g/mol) as well as narrow molecular weight distributions (PDI < 2 for all polymers). Influences of the metals and comonomer feed content on the polymerization activity as well as on the incorporation rates (20.9–42.6%) were investigated. The achieved NB/NB‐COOCH₃ copolymers were confirmed to be noncrystalline, exhibited good thermal stability (T_d > 400°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thiochlorowolframate von Wolfram(V) und -(VI). Die Kristallstrukturen von PPh4[WSCl4] und (PPh4)2[WS2Cl4] · 2 CH2Cl2

Thiochlorowolframates with Tungsten(V) and (VI). Crystal Structures of PPh₄[WSCl₄] and (PPh₄)₂[WS₂Cl₄] · 2 CH₂Cl₂ Diamagnetic (NEt₄)₂[WSCl₄]₂, having tungsten atoms linked via sulfur atoms, is obtained by the reaction of WCl₅ with NEt₄SH as well as by the reduction of WSCl₄ with NEt₄I in dichloromethane. If the reduction is performed with PPh₄I, PPh₄[WSCl₄] with monomer anions is formed. Reaction of WCl₆ with H₂S in dichloromethane yields brown, insoluble WS₂Cl₂ which has terminal W?S groups and bridging W? S? W groups according to its IR spectrum. WS₂Cl₂ and PPh₄Cl react to afford PPh₄[WS₂Cl₃] · 2 CH₂Cl₂ and (PPh₄)₂[WS₂Cl₄] · 2 CH₂Cl₂. IR spectra are reported. The crystal structures of PPh₄[WSCl₄] and (PPh₄)₂[WS₂Cl₄] · 2 CH₂Cl₂ were determined by X-ray diffraction. PPh₄[WSCl₄]: tetragonal, space group P4/n, Z = 2, a = 1292.3 pm, c = 763.2 pm; R = 0.054 for 898 observed reflexions. The [WSCl₄]^? ion has the structure of a square pyramid with a rather short W?S bond of 206 pm length. (PPh₄)₂[WS₂Cl₄] · 2 CH₂Cl₂: triclinic, space group P1 , a = 1017.7, b = 1114.5, c = 1243.4 pm, α = 70.61, β = 79.73, γ = 80.80°; R = 0.076 for 1804 reflexions. The [WS₂Cl₄]^2? has cis configuration; as it is situated on an inversion center it shows positional disorder.     

Kinetics of the reactions of C2H5, n‐C3H7, and n‐C4H9 radicals with Cl2 at the temperature range 190–360 K

The kinetics of the C₂H₅ + Cl₂, n‐C₃H₇ + Cl₂, and n‐C₄H₉ + Cl₂ reactions has been studied at temperatures between 190 and 360 K using laser photolysis/photoionization mass spectrometry. Decays of radical concentrations have been monitored in time‐resolved measurements to obtain reaction rate coefficients under pseudo‐first‐order conditions. The bimolecular rate coefficients of all three reactions are independent of the helium bath gas pressure within the experimental range (0.5–5 Torr) and are found to depend on the temperature as follows (ranges are given in parenthesis): k(C₂H₅ + Cl₂) = (1.45 ± 0.04) × 10^?11 (T/300 K)^{?1.73 ± 0.09} cm³ molecule^?1 s^?1 (190–359 K), k(n‐C₃H₇ + Cl₂) = (1.88 ± 0.06) × 10^?11 (T/300 K)^{?1.57 ± 0.14} cm³ molecule^?1 s^?1 (204–363 K), and k(n‐C₄H₉ + Cl₂) = (2.21 ± 0.07) × 10^?11 (T/300 K)^{?2.38 ± 0.14} cm³ molecule^?1 s^?1 (202–359 K), with the uncertainties given as one‐standard deviations. Estimated overall uncertainties in the measured bimolecular reaction rate coefficients are ±20%. Current results are generally in good agreement with previous experiments. However, one former measurement for the bimolecular rate coefficient of C₂H₅ + Cl₂ reaction, derived at 298 K using the very low pressure reactor method, is significantly lower than obtained in this work and in previous determinations. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 614–619, 2007     

Determination of the rate constants for the reaction Fe + O<Subscript>2</Subscript> = FeO + O in the forward and reverse directions

The results of our experimental studies and an analysis of the published data on the rate constant for the reaction Fe + O₂ = FeO + O in the forward (I) and reverse (−I) direction are reported. The data obtained in this work are described by the expressions k ₁ = 6.2 × 10¹⁴exp(−11100 K/T) cm³ mol⁻¹ s⁻¹ and k ₋₁ = 6.0 × 10¹³exp(−588 K/T) cm³ mol⁻¹ s⁻¹ (T = 1500–2500 K). The generalized expressions for the temperature dependences of these rate constants derived by combining our results with the literature data can be presented as k ₁ = 9.4 × 10¹⁴(T/1000)^0.022exp(−11224 K/T) cm³ mol⁻¹ s⁻¹ (T = 1500–2500 K) and k ₋₁ = 1.8 × 10¹⁴(1000/T)^0.37exp(−367 K/T) cm³ mol⁻¹ s⁻¹ (T = 200–2500 K).