Imidazolium Salt Ion Pairs in Solution

The formation, stabilisation and reactivity of contact ion pairs of non‐protic imidazolium ionic liquids (ILs) in solution are conceptualized in light of selected experimental evidence as well theoretical calculations reported mainly in the last ten years. Electric conductivity, NMR, ESI‐MS and IR data as well as theoretical calculations support not only the formation of contact ion pairs in solution, but also the presence of larger ionic and neutral aggregates even when dissolved in solvents with relatively high dielectric constants, such as acetonitrile and DMSO. The presence of larger imidazolium supramolecular aggregates is favoured at higher salt concentrations in solvents of low dielectric constant for ILs that contain shorter N‐alkyl side chains associated with anions of low coordination ability. The stability and reactivity of neutral contact species are also dependent on the nature of the anion, imidazolium substituents, and are more abundant in ILs containing strong coordinating anions, in particular those that can form charge transfer complexes with the imidazolium cation. Finally, some ILs display reactivities as contact ion pairs rather than solvent‐separated ions.     

An ab initio quantum chemical investigation of solvent-induced effect on 14N-NQR parameters of alanine,glycine, valine,and serine using a polarizable continuum model

In this paper ab initio quantum mechanical calculations of the ¹⁴N-nuclear quadrupole resonance (NQR) parameters of alanine, glycine, valine, and serine obtained from an electric field gradient (EFG) tensor, such as quadrupole frequencies and asymmetry parameters in gas phase and different solvents, have been carried out with the Gaussian 98 software package and the solvent-induced effects on these parameters have been evaluated using density functional theory (DFT). Furthermore, direct and indirect solvent effects on asymmetry parameters have been also calculated. We determined that the NQR parameters of the nitrogen atoms of amino acids are highly sensitive to environmental effects and that the observed solvent-induced shielding variation is strongly related to the values of the dielectric constants of the solvent and whether it is protic or aprotic. For more investigation of the solvent effect, the relative energies of each amino acid in various solvents have been calculated and the graphs of the relative energies versus dielectric constants have been analyzed.     

Solvent effects on 17O nuclear magnetic shielding: N-methylformamide in polar and apolar solutions

The solvent effect on ¹⁷O isotropic shielding was computed by different methods: the polarizable continuum model and a mixed approach, including a few real solvent molecules treated as the solute. The experimental data show that the behavior of protic and aprotic solvents is markedly different: we found that the continuum approach describes well the observed shielding at various dielectric constants for aprotic solvents, while the mixed procedure is needed when hydrogen bonds to the magnetic centre are present.Contribution to the Jacopo Tomasi Honorary Issue     

Solvent effects in the GIAO‐DFT calculations of the 15N NMR chemical shifts of azoles and azines

The calculation of ¹⁵N NMR chemical shifts of 27 azoles and azines in 10 different solvents each has been carried out at the gauge including atomic orbitals density functional theory level in gas phase and applying the integral equation formalism polarizable continuum model (IEF‐PCM) and supermolecule solvation models to account for solvent effects. In the calculation of ¹⁵N NMR, chemical shifts of the nitrogen‐containing heterocycles dissolved in nonpolar and polar aprotic solvents, taking into account solvent effect is sufficient within the IEF‐PCM scheme, whereas for polar protic solvents with large dielectric constants, the use of supermolecule solvation model is recommended. A good agreement between calculated 460 values of ¹⁵N NMR chemical shifts and experiment is found with the IEF‐PCM scheme characterized by MAE of 7.1 ppm in the range of more than 300 ppm (about 2%). The best result is achieved with the supermolecule solvation model performing slightly better (MAE 6.5 ppm). Copyright © 2014 John Wiley & Sons, Ltd.     

Protic ionic liquids: solvents with tunable phase behavior and physicochemical properties

The phase behavior, including glass, devitrification, solid crystal melting, and liquid boiling transitions, and physicochemical properties, including density, refractive index, viscosity, conductivity, and air-liquid surface tension, of a series of 25 protic ionic liquids and protic fused salts are presented along with structure-property comparisons. The protic fused salts were mostly liquid at room temperature, and many exhibited a glass transition occurring at low temperatures between -114 and -44 degrees C, and high fragility, with many having low viscosities, down to as low as 17 mPa.s at 25 degrees C, and ionic conductivities up to 43.8 S/cm at 25 degrees C. These protic solvents are easily prepared through the stoichiometric combination of a primary amine and Br?nsted acid. They have poor ionic behavior when compared to the far more studied aprotic ionic liquids. However, some of the other physicochemical properties possessed by these solvents are highly promising and it is anticipated that these, or analogous protic solvents, will find applications beyond those already identified for aprotic ionic liquids. This series of protic fused salts was employed to determine the effect of structural changes on the physicochemical properties, including the effect of hydroxyl groups, increasing alkyl chain lengths, branching, and the differences between inorganic and organic anions. It was found that simple structural modifications provide a mechanism to manipulate, over a wide range, the temperature at which phase transitions occur and to specifically tailor physicochemical properties for potential end-use applications.     

Reactions of aromatic sulphonyl chlorides with anilines : Studies of solvent effects by the approach of multiparameter empirical correlations

The reaction kinetics of 5-substituted 2-thiophenesulphonyl chlorides with anilines were studied in fourteen pure solvents (protic and aprotic) and in mixed solvents at 25°. The approach of multiparameter equations to describe solvent effects according to the Palm-Koppel and Krygowski-Fawcett models was unsuccessful. Instead satisfactory single parameter linear correlations, one for protic solvents with positive slope and another for aprotic solvents with negative slope, were found by using the dielectric constant ?. An S_AN mechanism for these reactions was proposed, bond-making being the rate-determining step for protic solvents and bond-breaking for aprotic ones. The analysis of some data for the reactions of benzenesulphonyl chloride showed that the mechanism is analogous also for this substrate and the rate-determining step is depending on both solvent and nucleophile. Hammett ρ-values for the reactions of substituted 2-thiophenesulphonyl chlorides with aniline are in accord with the proposed mechanism. ?-Values for the reactions of 2-thiophenesulphonyl chloride with substituted anilines are related to the solvent effects by equation ? = ? 15.7 f(?) + 0.113E + 3.94. The solvent effects on these values can be interpreted by the effect of the dielectric constant and the influence of H-bonding. Mixed solvents are characterized by the presence of a maximum rate.     

Effect of substituents on activation parameters in aliphatic S(N)2 reactions. A DFT study

The activation parameters and optimized structures of the reactants and transition states in the S(N)2 reactions of substituted pyridines and N,N-dimethylanilines with methyl iodide were computed at the DFT level in different solvents. The measured and calculated deltaG/deltaH/deltaS versus sigma plots proved to be linear, and their slopes, the deltadeltaG, deltadeltaH, and deltadeltaS reaction constants, were determined. The least solvent-dependent deltadeltaG reaction constants can be computed with acceptable accuracy. The calculated deltadeltaS data decrease only very slightly with the jointly increasing electron-withdrawing effect of the substituents and tightness of the transition states. The measured deltadeltaS values are influenced mainly by the change of solvation in the reactions, and deltadeltaH is also influenced by the reorganization of the solvent. Consequently, the experimental and calculated deltadeltaS and deltadeltaH reaction constants may deviate considerably from each other. In dipolar aprotic solvents the measured deltadeltaS was less than zero, and in protic solvents it was greater than zero. The ordering of the solvent molecules around the transition state with increasing charge is increased in the former but decreased in the latter media, as compared to the bulk of the solvents. The calculated deltaG(o), deltaH(o), and deltaS(o) parameters of the unsubstituted compounds agree relatively well with the experimental data for reactions of neutral molecules in dipolar aprotic solvents (e.g., XC6H4N(CH3)2 + CH3I). On the other hand, the measured and calculated activation parameters may show considerable deviations for reactions of ions (e.g., XC5H4NCH3+ + I-) and for any reaction in protic solvents.     

Kinetics and Mechanism of Monomolecular Heterolysis of Commercial Organohalogen Compounds: XXXI. Solvent Effect on the Rate of 1-Methyl-1-chlorocyclopentane Heterolysis. Correlation Analysis of Solvation Effects

Heterolysis of 1-methyl-1-chlorocyclopentane in protic and aprotic solvents occurs by the E1 mechanism. The reaction rate in aprotic solvents or in a set of protic and aprotic solvents is satisfactorily described by the parameters of the polarity and electrophilicity or ionizing power of the solvents. In protic solvents, the reaction rate grows with increasing polarity or ionizing power of the solvent and decreases with increasing nucleophilicity.     

A new class of SN2 reactions catalyzed by protic solvents: Facile fluorination for isotopic labeling of diagnostic molecules

Aprotic solvents are usually preferred for the SN2 reactions, because nucleophilicity and hence SN2 reactivity are severely retarded by the influence of the partial positive charge of protic solvents. In this work, we introduce a remarkable effect of using tertiary alcohols as a reaction medium for nucleophilic fluorination with alkali metal fluorides. In this novel synthetic method, the nonpolar protic tert-alcohol enhances the nucleophilicity of the fluoride ion dramatically in the absence of any kind of catalyst, greatly increasing the rate of the nucleophilic fluorination and reducing formation of byproducts (such as alkenes, alcohols, or ethers) compared with conventional methods using dipolar aprotic solvents. The great efficacy of this method is a particular advantage in labeling radiopharmaceuticals with [18F]fluorine (t1/2 = 110 min) for positron emission tomographic (PET) imaging, and it is illustrated by the synthesis of four [18F]fluoride-radiolabeled molecular imaging probes-[18F]FDG, [18F]FLT, [18F]FP-CIT, and [18F]FMISO-in high yield and purity and in shorter times compared to conventional syntheses.     

Solvent effect on photoisomerisation of 3-methyl-1-phenylbutane-1,2-dione 2-oxime

Photoisomerisation of (2E)- and (2Z)-3-methyl-1-phenylbutane-1,2-dione 2-oxime (MPBDO) in several solvents was studied. With increasing dielectric constants of solvents, kinetic constants of forward reactions (E-form-->Z-form) did not change appreciably but those of reverse reactions (Z-form-->E-form) decreased. The positive correlation was found between equilibrium constants of photoisomerisation and dielectric constants of solvents.     

Molecular interpretation for the solvation of poly(acrylamide)s. I. Solvent-dependent changes in the C=O stretching band region of poly(N,N-dialkylacrylamide)s

The solvation of poly(N,N-dimethylacrylamide) (PNdMA) and poly(N,N-diethylacrylamide) (PNdEA) in various protic and aprotic solvents has been studied by using infrared (IR) spectroscopy. Because PNdMA and PNdEA have the same polar functional group, their IR spectra show quite similar solvent effects. Unexpectedly, the solvent-dependent changes of the C=O stretching vibration (nu(C=O)) bands of the two polymers cannot be explained only by dielectric constants of the solvents. Then, infrared spectra of N,N-dimethylacetamide (NdMA) and N,N-diethylacetamide (NdEA), monomer models for PNdMA and PNdEA, respectively, in the same solvents as the polymer solutions have also been examined. Interestingly, the solvent-dependent spectra in the nu(C=O) band region of NdMA and NdEA are correlated with those of PNdMA and PNdEA, respectively, except for slight deviations, which may be ascribed to molecular mobility and/or exclusive volume. These correlations permit one to regard the solvation of the polymers as that of the corresponding monomers. As a result, we have proposed the assignments of nu(C=O) bands for the PNdMA and PNdEA solutions regarding the interactions between solvents and NdMA and NdEA as hydrogen bondings. In the IR spectra of PNdMA and PNdEA in the protic solvents, two C=O bands are mainly observed; one appears at a similar frequency to that of a C=O band observed for the monomer solution, and the other is characteristic of the polymer systems. The former band is likely to reflect the solvation behavior of PNdMA and PNdEA. The results clearly show that the solvation of a polymer can be interpreted at the molecular level using infrared spectroscopy sensitive to solvent effects.     

Metal‐Free Intermolecular Azide–Alkyne Cycloaddition Promoted by Glycerol

Metal‐free intermolecular Huisgen cycloadditions using nonactivated internal alkynes have been successfully performed in neat glycerol, both under thermal and microwave dielectric heating. In sharp contrast, no reaction occurs in other protic solvents, such as water, ethanol, or diols. DFT calculations have shown that the BnN₃/glycerol adduct promotes a more important stabilization of the corresponding LUMO than that produced in the analogous BnN₃/alcohol adducts, favoring the reactivity with the alkyne in the first case. The presence of copper salts in the medium did not change the reaction pathway (Cu(I) acts as spectator), except for disubstituted silylalkynes, for which desilylation takes place in contrast to the metal‐free system.     

Triethylborane-induced bromine atom-transfer radical addition in aqueous media: study of the solvent effect on radical addition reactions.

A mixture of ethyl bromoacetate and 1-octene was treated with triethylborane in water at ambient temperature to provide ethyl 4-bromodecanoate in good yield. The bromine atom-transfer radical addition in benzene was not satisfactory. The addition proceeded smoothly in polar solvents such as DMF and DMSO, protic solvents such as 2,2,2-trifluoroethanol and 1,1,1,3,3,3-hexafluoro-2-propanol, and aqueous media. Ab initio calculations were conducted to reveal the origin of the solvent effect of water in the addition reaction. The polar effect of solvents, which is judged by the dielectric constant, on the transition states in the bromine atom-transfer and radical addition steps is moderately important. Calculations show that a polar solvent tends to lower the relative energies of the transition states. The coordination of a carbonyl group to a proton in a protic solvent, like a Lewis acid, would also increase the efficiency of the propagation.     

Spectral and acid-base features of 3,7-dihydroxy-2,8-diphenyl-4H,6H-pyrano[3,2-g]chromene-4,6-dione (diflavonol)--a potential probe for monitoring the properties of liquid phases

Diflavonol is a molecule that can exist in neutral or anionic form and in several tautomeric forms in ground and excited states. Absorption and emission spectroscopy combined with theoretical calculations have shown that only one tautomer of neutral diflavonol exists in the ground state, but two exist in the excited state. In the latter case, one is the tautomer originating from the ground state tautomer, which exists in strongly protic solvents, the other is the phototautomer occurring in weakly protic or aprotic solvents as a result of the intramolecular transfer of one proton. The OH groups present in diflavonol and involved in weak intramolecular hydrogen bonds exhibit a proton-donating ability reflected by the experimental values of acidity constants or theoretical enthalpies and free energies of proton detachment. The electronically excited molecule is a relatively strong acid when it loses one proton. With increasing basicity of the medium, monoanionic and dianionic forms occur which exhibit spectral characteristics and an emission ability different from those of neutral diflavonol. These interesting features of diflavonol open up possibilities for the analytical use of the compound and its application as a spectral probe sensitive to the properties of liquid phases.     

Competitive C-I versus C-CN reductive elimination from a Rh(III) complex. Selectivity is controlled by the solvent

The RhIII complex [(PNP)Rh(CN)(CH3)][I] 5, obtained by oxidative addition of methyl iodide to [(PNP)Rh(CN)] 2, reacts selectively in two pathways: In aprotic solvents C-I reductive elimination of methyl iodide followed by its electrophilic attack on the cyano ligand takes place, giving the methyl isonitrile RhI complex [(PNP)Rh(CNCH3)][I] 3, while in protic solvents C-C reductive elimination of acetonitrile takes place forming an iodo RhI complex [(PNP)RhI] 9. Reaction of 2 with ethyl iodide in aprotic solvents gave the corresponding isonitrile complex, while in protic solvents no reactivity was observed. The selectivity of this reaction is likely due to a hydrogen bond between the cyano ligand and the protic solvent, as observed by X-ray diffraction, which retards electrophilic attack on this ligand.     

1-(Pyrimidin-4-yl)pyrazol-5(4<Emphasis Type="Italic">H</Emphasis>)-one derivatives: III. The medium properties effect on the position and mobility of the labile proton of 5-hydroxy-3-methyl-1-(6-methyl-2-methylthio-4-yl)pyrazole

Position and mobility of the labile proton in the 5-hydroxy-3-methyl-1-(6-methyl-2-methylthiopyrimidin-4-yl)pyrazole is determined by the medium protic properties, basicity and dielectric constant. In solvents possessing amphiprotic properties the oxypyrazole exists as a mixture of lactim and its ionized form. Basic highly polar environment contributes to the stabilization of the lactam form. In the solvents not prone to the formation of hydrogen bonds and characterized by low dielectric constant the preferred form of oxypyrazole is lactim.     

Solvent effect on analyte charge state,signal intensity,and stability in negative ion electrospray mass spectrometry; implications for the mechanism of negative ion formation

Department of Chemistry, University of New Orleans, New Orleans, Louisiana, USA The effect of solvent composition on negative ion electrospray ionization (ESI) mass spectrometry was examined. The onset potentials for ES1 of a series of chlorinated solvents and methanol were found to be within the range predicted by D. P. H. Smith, based on differences in the surface tension of the solvents used. The tendency toward electric discharge decreased with increasing percent weight of chlorine in the solvent. This effect has been attributed to an increasing propensity for electron capture for more highly chlorinated solvents. Addition of the electron scavenger gas SF, was even more effective at suppressing corona discharge phenomena. In a comparison of ultimate signal intensity obtainable for a test analyte in 10% methanol, the highest signal, which was stable over the widest range of temperatures, was exhibited by chloroform compared to dichloromethane, 1,2-dichloroethane, carbon tetrachloride, and methanol (100%). Chloroform, thus, is a recommended solvent for negative ion electrospray mass spectrometry (ES/MS) when solubility is not a limiting issue. Solvent polarity was shown to exhibit a profound influence on the distribution of charge states in negative ion ES/MS. For both chlorinated and nonchlorinated organic solvents, the higher the solution dielectric constant, the more the charge-state distribution is shifted toward higher charge states. These observations build on the “electrophoretic” mechanism of droplet charging. Solvents with high solution dielectric constants are considered to be most effective at stabilizing multiply charged ions (where charge separation is greatest), and they are likely to increase the level of droplet charging. Solvents with high basicities (gas phase and solution phase) and high proton affinities, yet low dielectric constants, favor lower charge states in ES mass spectra of lipid A and cardiolipin from Escherichia coli. This indicates that gas-phase processes and solvent basicity contribute much less toward ion formation than solution-phase solvation via preferred orientation of the solvent dipole.     

溶剂对聚(苯乙烯-环氧乙烷)嵌段大单体与某些烯基单体自由基共聚活性的影响

本文研究了溶剂对聚(苯乙烯-环氧乙烷)嵌段大单体(Poly(St-b-EO)-MAMacromer)与苯乙烯(St)、甲基丙烯酸甲酯(MMA)、甲基丙烯酸(MA)自由基共聚活性的影响。其共聚活性同时受溶剂的介电常数(ε)、增长活性链与溶剂二者溶度参数差值(△σ)的影响,并存在一定的线性关系。     

Solvent polarity induced structural changes in 2,6-diamino-9,10-anthraquinone dye

Photophysical properties of 2,6-diamino-9,10-anthraquinone (2,6-DAAQ) dye have been investigated in different solvents and solvent mixtures. The fluorescence quantum yields, fluorescence lifetimes, radiative rate constants, nonradiative rate constants and absorption and fluorescence spectral characteristics show unusual deviations in the lower polarity aprotic solvents in comparison to those in other aprotic solvents of medium to higher polarities. The results indicate that the dye exists in different structural forms in the lower and in the medium to higher polarity solvents. Drawing an analogy with the results reported for other amino-substituted dyes, it is inferred that 2,6-DAAQ dye adopts a planar intramolecular charge transfer (ICT) structure in medium to higher polarity solvents, where the amino lone pairs are in good resonance with the anthraquinone pi-cloud. In the lower polarity solvents, however, the dye is inferred to exist in a nonplanar structure where the amino lone pairs are not in good resonance with the anthraquinone pi-cloud. Due to these structural differences, the dye displays significantly different photophysical behavior in the lower polarity solvents than in the other solvents of medium to higher polarities. Supportive evidence for the above structural changes has been obtained from ab initio quantum chemical calculations on the structures of the dye under different conditions. Unusual deviations in the photophysical properties of 2,6-DAAQ dye in protic solvents in comparison to those in aprotic solvents of similar polarities are attributed to the intermolecular hydrogen bonding effect involving the OH groups of the protic solvents and the quinonoid oxygens of the dye.     

Synthesis,thermal and lyotropic liquid crystalline properties of protic ionic salts

A series of protic ionic salts were synthesised by a simple acid–base reaction from various pyridine derivatives and dodecylbenzenesulfonic acid in a common organic solvent and characterised in terms of their thermal and lyotropic liquid crystalline properties using various experimental techniques. All of them exhibited lyotropic liquid crystalline phases in toluene, methanol, acetonitrile, dimethyl sulfoxide and water. Their critical concentrations for the formation of biphasic solutions and concentrations for the formation of lyotropic solutions were quite broad depending on the dielectric constants of the solvents. Their lyotropic phases were identified as lamellar phases, since their textures exhibited bâtonnets, oily streaks and mosaic textures. They can potentially be used for many organic transformations, which may have implications in green chemistry.