对季鏻与季鉮离子具有电位响应的二元酸酯PVC膜电极

研究发现二元酸酯PVC膜电极对季鏻和季鉮盐均具有能斯特响应。电极的响应机理是由于季鏻、季鉮阳离子的正电中心与电子云密度较大的酯中苯环产生次级力作用所致。     

Systematic Study of Quaternary Ammonium Cations for Bromine Sequestering Application in High Energy Density Electrolytes for Hydrogen Bromine Redox Flow Batteries

Bromine complexing agents (BCAs) are used to reduce the vapor pressure of bromine in the aqueous electrolytes of bromine flow batteries. BCAs bind hazardous, volatile bromine by forming a second, heavy liquid fused salt. The properties of BCAs in a strongly acidic bromine electrolyte are largely unexplored. A total of 38 different quaternary ammonium halides are investigated ex situ regarding their properties and applicability in bromine electrolytes as BCAs. The focus is on the development of safe and performant HBr/Br₂/H₂O electrolytes with a theoretical capacity of 180 Ah L⁻¹ for hydrogen bromine redox flow batteries (H₂/Br₂-RFB). Stable liquid fused salts, moderate bromine complexation, large conductivities and large redox potentials in the aqueous phase of the electrolytes are investigated in order to determine the most applicable BCA for this kind of electrolyte. A detailed study on the properties of BCA cations in these parameters is provided for the first time, as well as for electrolyte mixtures at different states of charge of the electrolyte. 1-ethylpyridin-1-ium bromide [C2Py]Br is selected from 38 BCAs based on its properties as a BCA that should be focused on for application in electrolytes for H₂/Br₂-RFB in the future.     

ANTIBACTERIAL ACTIVITY OF SINGLE AND MIXED AMMONIUM AND PHOSPHONIUM SALTS GRAFTED ON "GEL-TYPE" STYRENE-DIVINYLBENZENE COPOLYMERS*

1.INTRODUCTIONThesynthesisofpolymer-supported"onium"salts(ammoniumandphosphonium)(1~5(wasdiscussedindetailduetothewidefieldofutilizationas:polarstationaryphasesforanionchromatography(6(,polymericreagentsfortrans-quaternizationreactions(7,8(,phase-transfercatalysts(9~13(andpolycationicbiocides(14~17(.Manychemicalmaterialssuchasozone,liquidchlorine,sodiumhydrochloride,s.a.,havebeenlargelyusedtosterilizeairandwater.Suchmaterialsrequirespecialequipmentandcarelessusemaycauseenvironmentalpolluti…     

Fast migration of fluoride ions in growing anodic titanium oxide

The rapid inward migration of fluoride ions in growing anodic titanium oxide under a high electric field has been elucidated by anodizing a Ti–12 at% silicon alloy, where film growth proceeds at nearly 100% efficiency in selected electrolytes. Further, incorporated silicon species in the anodic film are immobile, acting as marker species. The migration rate of fluoride ions is determined precisely by three-stage anodizing, consisting of initial anodic film formation at a constant current density to 50 V in ammonium pentaborate electrolyte, subsequent incorporation of fluoride ions by reanodizing to 55 V in ammonium fluoride electrolyte and, finally, anodizing again in ammonium pentaborate electrolyte at high current efficiency. The resultant films were analyzed by glow discharge optical emission spectroscopy to reveal the depth distribution of fluoride ions and the location of the silicon marker species. The fluoride ions migrate inward at twice the rate of O²⁻ ions. Consequently, anodizing of titanium in fluoride-containing electrolytes develops a fluoride-rich layer that separates the alloy substrate from the anodic oxide, with eventual detachment of the film from the substrate.     

季鏻盐定域体制备阴离子膜电极的研究

本文合成了数种季鏻盐,并用于制成阴离子膜电极;比较了不同链长的季鏻盐和电活性物含量对电极性能的影响;研究了电极的电位选择性系数与阴离子性质的关系。     

Synthesis of arsonium salts and betaines based on triphenylarsine and ω-bromoalkanoic acids

The reactions between Ph₃As and ω-bromoalkanoic acids with the length of polymethylene fragment n = 5, 7, 9 afford quaternary arsonium salts. Their treatment with alkali gives biologically active arsenobetaines. Solvent-free reactions of Ph₃P or Ph₃As with 2,3-dibromopropionic acid lead to the corresponding arsonium and phosphonium salts bearing (CH₂)₂COOH substituent.     

Synthesis of a novel series of polymerizable surfactants and application in emulsion polymerization

A series of polymerization surfactants (surfmers) was synthesized, whose structures combined the characteristics of polyoxyethylene as nonionic group and quaternary ammonium a as cationic group. The structures of the product were confirmed by MS, and the content of cationic‐activity matter was determined by two‐phase titration. The surfmers were then used with constant addition profiles in semicontinuous polymerization of vinyl acetate–butyl acrylate–Veova 10–hexafluorobutyl methacrylate, and the polydispersity indexes (PDI) were lower than 0.1. The particle size, amount of coagulum, and stability against electrolyte and freeze/thaw were evaluated. As a reference, an unreactive surfactant cetyl trimethyl ammonium bromide (CTAB) was also used for the polymerization. Compared to CTAB, the surfmers behaved much better. Not only stabilities to electrolyte and water resistance were improved, but also freeze/thaw stability got a superior performance. Copyright © 2008 John Wiley & Sons, Ltd.     

Salts of acyl halides and 3, 5-di-tert-butyl-4-hydroxy-N,N-dimethylbenzylamine in benzylation reactions

The interaction of 3, 5-di-tert-butyl-4-hydroxy-N, N-dimethylbenzyiamine with various acyl halides has been studied. The N-acyl quaternary ammonium salts obtained can be used to introduce a sterically hindered phenol fragment into organic compounds containing an active methylene group.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 526–529, March, 1993.     

Cationic Phosphonolipids Containing Quaternary Phosphonium and Arsonium Groups for DNA Transfection with Good Efficiency and Low Cellular Toxicity**

Replacing the ammonium polar head in cationic lipids 1 (A=N) by a phosphonium or an arsonium group (A=P, As) improves their properties as synthetic vectors for DNA transfection. The increased volume of the cationic head is supposed to modify the interactions of the vector with the solvent and DNA.     

A simple access to metallic or onium bistrifluoromethanesulfonimide salts

Numerous salts of the (CF₃SO₂)₂N⁻ anion, called TFSI, were prepared according to an original one-pot procedure. First, N-benzyl trifluoromethanesulfonimide (N-benzyl triflimide) was treated with ethanol to form an oxonium intermediate, which was then neutralized by various bases to provide metallic or trialkylammonium triflimides salts. Alternatively, N-benzyl triflimide was directly treated with trialkyl sulfonium, quaternary ammonium or phosphonium halides to deliver the corresponding triflimide derivatives. N-Benzyl triflimide can be also reacted with di- or tri-alkylamines and phosphines to get benzyl onium salts. Analogous reactions can be carried out with N-allyl triflimide. Therefore, the TFSI anion can be very easily and expediently associated with a wide range of metallic or organic cations. Such salts can find applications as electrolytes for batteries and fuel cells, ionic liquids or Lewis acids.     

Potentiometric determination of penicillins with ion-selective electrodes

Quaternary ammonium, phosphonium and arsonium membrane electrodes sensitive to benzylpenicillin, ampicillin and oxacillin have been investigated. The order of merit of electrode performance is cetyltrioctylammonium> cetyltrioctylphosphonium> cetyltrioctylarsonium. The electrodes are suggested for use in rapid determination of penicillin drugs by direct potentiometry.     

Electroinitiated Polymerization of 3,3-BIS(N-Carbazolylmethyl)Oxetane

Abstract

3,3-Bis(N-carbazolylmethyl)oxetane, a cyclic compound with carbazolyl substituents closely linked to the oxetane ring, was polymerized by electrochemical initiation in aprotic polar solvents using a quaternary ammonium salt as electrolyte. Colored polymers were obtained as thin films deposited on the anode and were characterized by IR, ¹H NMR, and thermogravimetry. The data obtained refute the classical cationic polymerization of oxetanes.     

Physical and electrochemical properties of low-viscosity phosphonium ionic liquids as potential electrolytes

A new group of room temperature ionic liquids based on triethylalkylphosphonium cations together with a bis(trifluoromethylsulfonyl)imide anion as a novel electrolyte is presented in this report. It was found that phosphonium ionic liquids showed lower viscosities and higher conductivities than those of the corresponding ammonium ionic liquids. Particularly, phosphonium ionic liquids containing a methoxy group, triethyl(methoxymethyl)phosphonium bis(trifluoromethylsulfonyl)imide and triethyl(2-methoxyethyl)phosphonium bis(trifluoromethylsulfonyl)imide, exhibited quite low viscosities (35 and 44 mPa s at 25 °C, respectively). Linear sweep voltammetry measured in neat phosphonium ionic liquids at a glassy carbon electrode indicated wide potential windows (at least −3.0 to +2.3 V vs. Fc/Fc⁺). Thermogravimetric analysis suggested that phosphonium ionic liquids were thermally stable up to nearly 400 °C, showing slower gravimetric decreases at high temperature compared to those of the corresponding ammonium ionic liquids.     

Mechanisms of polymer-supported catalysis. 5. Solvation of quaternary onium ions in polystyrene gels by 13C-NMR spectroscopy

¹³C-NMR linewidths and spin-lattice relaxation times have been determined for soluble and crosslinked polystyrenes containing quaternary phosphonium and ammonium ions. Solubilities and NMR linewidths show that the solvating abilities toward tri-n-butylphosphonium ions are CDCl₃ > CH₃OH > D₂O > benzene, toluene, toward the trimethylammonium ions, CH₃OH > CDCl₃ > D₂O > toluene, and toward the nonpolar polymer backbone, CDCl₃, benzene > toluene > CH₃OH > D₂O.     

POLYMER—SUPPORTED SINGLE AND MIXED AMMONIUM AND PHOSPHONIUM SALTS AS CATALYSTS FOR PHASE—TRANSFER REACTIONS

In this study was to investigate,by phase-transfer catalysis,the activity of single and mixed ammonium and phosphonium salts grafted on a “gel-type“ stryene-7% divinylbenzene copolymer in the oxidation of benzyl alcohol with hydrogen peroxide.A wide variety of catalysts with different quaternary groups and different quaternary chain length substitutents were examined.The activity of single“onium“salts increases as a consequence of the association of ammonium and phosphonium salts grafted onn the same polymeric support.The activity of polymer-supported ammonium and phosphonium salts increases with the number of carbon atoms contained in the alkyl radicals of the -onium and of the functionalization degree with phosphonium groups.     

Conductivity and thermal behavior of proton conducting polymer electrolyte based on poly (N-vinyl pyrrolidone)

The polymer electrolytes based on poly N-vinyl pyrrolidone (PVP) and ammonium thiocyanate (NH₄SCN) with different compositions have been prepared by solution casting technique. The amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The shift in T_g values and the melting temperatures of the PVP-NH₄SCN electrolytes shown by DSC thermo-grams indicate an interaction between the polymer and the salt. The dependence of T_g and conductivity upon salt concentration have been discussed. The conductivity analysis shows that the 20 mol% ammonium thiocyanate doped polymer electrolyte exhibit high ionic conductivity and it has been found to be 1.7 × 10⁻⁴ S cm⁻¹, at room temperature. The conductivity values follow the Arrhenius equation and the activation energy for 20 mol% ammonium thiocyanate doped polymer electrolyte has been found to be 0.52 eV.     

Polymerization of methylmethacrylate with cetyl benzyl dimethyl ammonium chloride and benzoyl peroxide as redox initiator system

Polymerization of methylmethacrylate was studied using benzoyl peroxide and cetyl benzyl dimethyl ammonium chloride (CBDAC) combination as the redox initiator at 40°. Equilibrium complexation between the redox components precedes the radical generation process, and the complex acts as the actual initiating species. Initiator exponent was 0.5 under various conditions of homogeneous polymerization. Kinetics of polymerization in diluted systems were variable in respect of order with respect to monomer depending on the nature of the solvent or additive. DMF, acetonitrile and pyridine produced rate enhancing effects through actively influencing the initiation step; cyclohexanone, acetone, chloroform, methanol and benzene behaved as (normal) inert diluents, while formamide and acetamide produced retardation. Termination of polymerization occurred exclusively bimolecularly. As a redox component, the quaternary chloride salt, CBDAC behaved somewhat differently from quaternary bromide salts cetyl trimethyl ammonium bromide and cetyl pyridinium bromide.     

Allylation of 5-Methylfurfural Catalyzed by Phase-Transfer Reagents in Aqueous Media

Allylation of 5-methylfurfural with allyl halide and zinc was performed by using quaternary ammonium and phosphonium salts as phase-transfer catalysts. The phosphonium salt showed higher activity than the ammonium salt. Excellent yields were obtained with both catalysts.     

Choline chloride/CuCl as an effective homogeneous catalyst for palladium-free Sonogashira cross-coupling reactions

Choline chloride–CuCl (ChCl–CuCl) has been employed as an efficient catalytic system in the palladium-free Sonogashira-type cross-coupling reactions of phenylacetylene with a variety of aryl halides. Choline chloride, as an effective ligand and a quaternary ammonium salt, demonstrated an efficient stabilizing effect on the Cu(I) species during the reaction. This homogeneous catalytic system is attractive in view of its ease of application and low cost.     

四丁基氢氧化鏻(TBPH)的制备及其催化性质

有机硅氧烷聚合成硅油和硅橡胶所用的瞬时催化剂在完成聚合后,适当升高温度即可分解,失去催化活性,否则催化剂的存在会在升温时引起高聚物的分解,目前均以四甲基氢氧化铵为瞬时催化剂,其受热(约130℃)后可分解生成甲醇和三甲胺：