自生纳米纤维增强SiO2气凝胶的制备及性能研究

采用溶胶-凝胶法和乙醇超临界干燥工艺制备ZrO_X/SiO₂复合气凝胶,再经1200℃高温热处理得到自生纳米纤维增强SiO₂复合气凝胶。利用扫描电子显微镜、透射电子显微镜、X射线衍射、热重和氮气吸附等手段对气凝胶的结构和性能进行了分析,并且测试了样品的压缩强度及真密度。实验结果表明：自生纳米纤维增强SiO₂复合气凝胶具有均匀的多孔网络结构,锆氧纳米纤维是以化学键连接复合的方式无序穿插在气凝胶中,对复合气凝胶的机械强度和隔热性能有明显的改善。经1200℃热处理后的ZrO_X/SiO₂复合气凝胶比表面积为827.22m₂·g^-1,压缩强度为9.68MPa,真密度为0.23g·cm^-3。     

添加三甲基乙氧基硅烷制备耐高温硅/铝复合气凝胶

以仲丁醇铝(ASB)和三甲基乙氧基硅烷(TMEO)为前驱体,采用溶胶-凝胶法,经乙醇超临界干燥制备了耐温高、成型性好的硅/铝复合气凝胶。用透射电子显微镜、N₂吸附分析仪、红外光谱仪、X射线衍射仪、hot disk热分析仪等仪器表征了气凝胶的形貌、孔结构、表面基团、晶相、热学等性能。在溶胶-凝胶过程中,通过添加TMEO在氧化铝纳米颗粒表面引入了-Si-(CH₃)₃基团,该基团经高温热处理后会在Al₂O₃表面形成SiO₂纳米颗粒,有效地抑制了Al₂O₃纳米颗粒在高温下的晶体生长,使得该复合气凝胶具有优异的耐温性能。在1 200 ℃高温处理后,线性收缩低至16%,比表面积可达141 m²·g^-1,这将进一步促进气凝胶材料在高温保温隔热、吸附、催化等领域的广泛应用。     

中空纳米二氧化硅复合微球的制备及其对蛋白的亲和分离

利用水热法合成了中空巯基纳米二氧化硅微球(SiO₂-SH), 然后在其表面修饰亚氨基二乙酸基团(-IDA), 形成了中空SiO₂-SH/IDA双功能化纳米微球。利用该纳米微球表面的-SH和-IDA双功能团, 可以更多的吸附溶液中的Ni²⁺, 形成SiO₂-SH/IDA-Ni²⁺复合微球从而可以更好的分离以六聚组氨酸为标签的(His-tagged)蛋白。结果显示制备的样品对分离His-tagged蛋白具有广谱性, 并且具有较好的再生能力。     

Fe2O3/Al2O3二元气凝胶合成高质量单壁纳米碳管

通过溶胶和超临界干燥方法制得了Fe₂O₃/Al₂O₃二元气凝胶，其比表面积和孔隙体积分别为246 m²·g^-1和1.89 cm³·g^-1，并具有较宽的孔径分布。以Fe₂O₃/Al₂O₃二元气凝胶作催化剂，通过甲烷催化裂解成功地合成了高质量的单壁纳米碳管。利用FESEM、TEM和HRTEM、Raman光谱等分析手段研究了反应温度对单壁纳米碳管生长的影响。结果表明在900 ℃时合成单壁纳米碳管的质量较高，并且合成的炭产物为毡状，该炭产物主要为高质量的单壁纳米碳管。     

中空纳米二氧化硅复合微球的制备及其对蛋白的亲和分离

利用水热法合成了中空巯基纳米二氧化硅微球(SiO₂-SH), 然后在其表面修饰亚氨基二乙酸基团(-IDA), 形成了中空SiO₂-SH/IDA双功能化纳米微球。利用该纳米微球表面的-SH和-IDA双功能团, 可以更多的吸附溶液中的Ni²⁺, 形成SiO₂-SH/IDA-Ni²⁺复合微球从而可以更好的分离以六聚组氨酸为标签的(His-tagged)蛋白。结果显示制备的样品对分离His-tagged蛋白具有广谱性, 并且具有较好的再生能力。     

SiO2气凝胶负载的Ni催化剂在甲烷部分氧化制合成气反应中的催化性能及稳定性

以常压有机溶剂置换(A)和溶剂置换-表面改性(B)方式制备的两种SiO₂气凝胶(SiO₂-A(或B)型气凝胶,记为SiO₂-A(or B)G)为载体, 采用常规浸渍法和聚乙烯吡咯烷酮(PVP)添加浸渍法合成不同SiO₂气凝胶负载的Ni/SiO₂催化剂, 并考察其催化的甲烷部分氧化(POM)制合成气的反应性能. 结果表明, 各催化剂的初始反应性能相近, 但Ni/SiO₂-BG的POM稳定性明显较Ni/SiO₂-AG的差, 而PVP添加制备的催化剂稳定性则获明显改善, Ni/SiO₂-AG-PVP、Ni/SiO₂-BG-PVP上POM稳定性相近. 结合X射线衍射(XRD)、程序升温还原反应(H₂-TPR)、高分辨透射电镜(TEM)和Brunauer-Emmett-Teller (BET)等表征结果的分析发现: (1) SiO₂-AG表面上存在一定量的羟基, 可促进亲水性金属物种与其的相互作用, 而SiO₂-BG表面上基本为有机基团, 与亲水性金属物种几乎无作用; (2) PVP的存在可使金属物种进入亲/疏水载体孔道深处, 抑制焙烧中载体骨架的收缩和金属颗粒的生长, 进而促进金属-载体的相互作用. 这二者均能有效地提高催化剂的POM反应稳定性.     

Fe3O4@SiO2@mTiO2介孔多功能纳米复合颗粒的制备及载药能力

以溶剂热法制备氨基功能化的Fe₃O₄纳米颗粒为磁核,结合溶胶-凝胶法和模板法在其表面先后包覆上致密的SiO₂层和介孔TiO₂层,制备了磁性-发光-微波热转换性-介孔结构为一体的多功能核-壳结构纳米复合颗粒,并对其结构、性能及载药能力进行了研究。XRD分析表明:Fe₃O₄表面包覆上了无定形结构的SiO₂和TiO₂。TEM照片表明:所得的纳米复合颗粒具有明显的核壳结构和完美的球形,构成核的Fe₃O₄颗粒的尺寸在40~50 nm之间,Fe₃O₄@SiO₂@mTiO₂核壳结构纳米复合颗粒的尺寸为60~70 nm,壳层厚度约10 nm,并可观察到壳层中清晰的孔状结构。磁性、荧光光谱和微波热转换特性分析表明:该复合颗粒同时具有良好的发光性、磁性和微波热转换特性。N₂气吸附及药物负载率分析表明,该复合颗粒具有较高的比表面积(640 m²·g^-1)和介孔结构(孔径约2.8 nm)并且具有较高的药物负载率。     

明胶/PEG制备多孔块状SiO2载体及葡萄糖淀粉酶的固定

本文通过溶胶-凝胶法，以正硅酸乙酯、聚乙二醇和明胶为主要原料，制得了孔径约为20 nm的生物酶载体用多孔SiO₂块状材料，并着重研究了热处理温度对多孔SiO₂载体的结构和酶活力的影响。明胶的加入能有效地防止SiO₂表面羟基在烧结过程中的失活现象，提高了多孔材料的吸附能力。制备过程中未加入明胶样品(G0)的酶吸附量和初始酶活力回收率的最高值分别为90 mg·g^-1和11%；加入质量分数为15%明胶的样品(G15)的酶吸附量和初始酶活力回收率分别提高到115 mg·g^-1和38%以上。经过5次重复使用后，G15载酶块体所显示的酶活力还高于G0载酶块体的初始酶活力。600 ℃热处理后所制得的G15样品表现出较好的综合性能，此类多孔块体材料便于酶的回收、保存和再利用。     

SiO2气凝胶的制备及微孔分布

本文以正硅酸乙酯(TEOS)为原料，水和乙醇为溶剂，盐酸和氨水为催化剂，采用溶胶-凝胶，水热合成和低温冷冻干燥等工艺，制备了SiO₂气凝胶，研究了pH值、TEOS浓度及焙烧温度对气凝胶的比表面积、孔径分布的影响。结果表明：在碱性条件下，制得的气凝胶比表面积较大，孔径较窄。气凝胶在较高温度下，比表面积有所下降，孔径略微变粗。     

疏水性对溶胶-凝胶SiO2薄膜抗真空污染及抗激光损伤能力的影响

以正硅酸乙酯作为前驱体, 利用碱催化方式制备了SiO₂溶胶, 通过在溶胶中添加含疏水基团(-CH₃)的六甲基二硅氮烷(HMDS)对溶胶进行改性, 使用添加不同物质的量比HMDS改性后的溶胶用提拉法在K9基片上镀膜, 获得了具有疏水性能的SiO₂薄膜。采用自制接触角测量仪、紫外-可见-近红外分光光度计研究了薄膜的水接触角和透过率。测试了薄膜的激光损伤阈值, 并观察了激光辐照后薄膜的损伤形貌。通过真空污染实验对薄膜的抗污染能力及抗激光损伤能力进行了研究。实验结果表明:经疏水改性的溶胶所镀制的薄膜激光损伤阈值由未改性样品的24.3 J·cm^-2增加到37 J·cm^-2(1 064 nm, 10 ns), 且抗真空污染能力大大加强:在真空环境下保存168 h后, 未改性样品的峰值透过率下降了2%, 而疏水改性后的样品峰值透过率仅下降了0.25%, 并保持了较高的激光损伤阈值(30.8 J·cm^-2)。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.