SnO2 纳米棒的氧化还原特性

 利用室温固相反应在 NaCl-KCl 熔盐介质中, 通过焙烧含 SnO2 纳米颗粒前驱体合成了 SnO2 纳米棒, 并采用 X 射线衍射、扫描电镜、透射电镜、选区电子衍射和 X 射线光电子能谱对 SnO2 纳米棒进行了表征. 结果表明, SnO2 纳米棒是表面光滑、结晶完整的金红石结构单晶体, 直径为 10~20 nm, 长度为几百纳米到几个微米. 程序升温还原结果表明, SnO2 纳米棒具有较好的氧化还原性能和催化活性. 探讨了 SnO2 纳米棒的氧化还原机理.     

Crystallization of SnO2 Produced by Sol-Gel Technique from Salts of Tin in Different Oxidation States

SnO₂ xerogels were obtained by the sol-gel technique from alcoholic solutions of tin(II) and (IV) salts and used as model systems for studying the behavior of SnO₂—the main material of gas sensors, in the course of formation and operation under the action of temperature.     

Wafer-Level Fabrication and Gas Sensing Properties of miniaturized gas sensors based on Inductively Coupled Plasma Deposited Tin Oxide Nanorods

SnO₂ nanorods were successfully deposited on 3” Si/SiO₂ wafers by inductively coupled plasma-enhanced chemical vapor deposition (PECVD) and a wafer-level patterning of nanorods layer for miniaturized solid state gas sensor fabrication were performed. Uniform needle-shape SnO₂ nanorods in situ grown were obtained under catalyst- and high temperature treatment-free growth condition. These nanorods have an average diameter between 5 and 15 nm and a length of 160 to 300 nm. The SnO₂-nanords based gas sensors were tested towards NH₃ and CH₃OH and gas sensing tests show remarkable response, showing promising and repeatable results compared with the SnO₂ thin films gas sensors.     

Hydrothermal synthesis of hierarchical SnO2 nanomaterials for high-efficiency detection of pesticide residue

Acephate pesticide contamination in agricultural production has caused serious human health problems. Metal oxide semiconductor (MOS) gas sensor can be used as a portable and promising alternative tool for efficiently detection of acephate. In this study, hierarchical assembled SnO₂ nanosphere, SnO₂ hollow nanosphere and SnO₂ nanoflower were synthesized respectively as high efficiency sensing materials to build rapid and selective acephate pesticide residues sensors. The morphologies of different SnO₂ 3D nanostructures were characterized by various material characterization technology. The sensitive performance test results of the 3D SnO₂ nanomaterials towards acephate show that hollow nanosphere SnO₂ based sensor displayed preferable sensitivity, selectivity, and rapid response (9 s) properties toward acephate at the optimal working temperature (300 °C). This SnO₂ hollow nanosphere based gas sensor represents a useful tool for simple and highly effective monitoring of acephate pesticide residues in food and environment. According to the characterization results, particularly Brunauer-Emmett-Teller (BET) and Ultraviolet-Visible Spectroscopy (UV–vis), the obvious and fast response can be attributed to the mesoporous hollow nanosphere structure and appropriate band gap of SnO₂ hollow nanosphere.     

Sensing mechanism of Pd-doped SnO2 sensor for LPG detection

In the present work, studies have been made to analyze the sensitivity, response, recovery time and sensing mechanism of Pd-doped thick film SnO₂ sensor for detection of LPG. To achieve this, thick film Pd-doped (0.25 and 1% by weight in available Indium doped SnO₂ thick film paste supplied by ESL, USA) along with an undoped (Indium doped) SnO₂ sensors were fabricated on a 1″ × 1″ alumina substrate. It consists of a gas sensitive layer (doped SnO₂), a pair of electrodes underneath the gas sensing layer serving as a contact pad for sensor. Also, a heater element on the backside of the substrate was printed for generating appropriate operating temperature at the substrate necessary for acquiring gas sensing properties. The sensor doped with 1% palladium showed the maximum sensitivity of 72% at 350 °C for 0.5% concentration of LPG. Possible detailed sensing mechanism of Pd-doped SnO₂ sensor for LPG detection has been proposed.     

Enhanced gas sensing by assembling Pd nanoparticles onto the surface of SnO2 nanowires

SnO₂ nanowires with an average 0.6 μm in length and about 25 nm in diameter were prepared by a hydrothermal method. The sensors were fabricated using SnO₂ nanowires assembled with Pd nanocrystals. The sensing properties of the sensors such as selectivity, response-recovery time and stability were tested at 290 °C. After assembling Pd nanocrystals onto the surface of SnO₂ nanowires, the gas sensing properties of the sensors toward H₂S were improved. The sensors based on Pd nanoparticle@SnO₂ nanowires exhibit high stability owing to stable single crystal structure. The mechanism of promoting sensing properties with Pd nanoparticles is discussed.     

Catalytic properties of SnO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> compositions in total methane oxidation

Tin and titanium dioxides and their compositions were studied as catalysts for the reaction of complete oxidation of methane. The catalytic activity of the test samples was compared in terms of first-order reaction rate constants with reference to the unit surface area of a catalyst. The crystal structures and specific surface areas of the obtained compositions were characterized. The thermal stability of SnO₂ was investigated. Data on the temperature-programmed reduction of SnO₂ and the composition Sn_0.70Ti_0.30O₂ in hydrogen were given.     

Hierarchically Structure SnO2/ZnO Nanocomposites: Preparation,Growth Mechanism and Gas Sensing Property

SnO₂/ZnO nanocomposite was synthesized from mixed ethanol and water systems and the ethanol-sensing properties of sensors based on SnO₂/ZnO were investigated. The structure and morphology of the products was characterized by x-ray diffraction (XRD) and a field emission scanning electron microscope (FE-SEM). The results showed that the diameter of the liked pine needle SnO₂ was about 40 nm with a length about 300 nm, which are uniformly dispersed on the surface of the ZnO nanosheets. The growth process of the SnO₂/ZnO nanocomposite was discussed. The results of gas sensing properties of SnO₂/ZnO nanocomposite sensor showed high and quick response to ethanol vapor at 5.0 v. This sensor showed the advantages of high selectivity, strong stability, and prompt response/recovery characteristics in detecting ethanol vapor at 5.0 v.     

Stability of semiconductor sensors based on nanosized SnO2 and Pd/SnO2

Adsorption semiconductor hydrogen sensors were created from nanosized SnO₂ and Pd/SnO₂ materials by the sol-gel method. The sensors were shown to be stable over a long time of operation.     

Surface engineering of one-dimensional tin oxide nanostructures for chemical sensors

Nanostructured materials are promising candidates for chemical sensors due to their fascinating physicochemical properties. Among various candidates, tin oxide (SnO₂) has been widely explored in gas sensing elements due to its excellent chemical stability, low cost, ease of fabrication and remarkable reproducibility. We are presenting an overview on recent investigations on 1-dimensional (1D) SnO₂ nanostructures for chemical sensing. In particular, we focus on the performance of devices based on surface engineered SnO₂ nanostructures, and on aspects of morphology, size, and functionality. The synthesis and sensing mechanism of highly selective, sensitive and stable 1D nanostructures for use in chemical sensing are discussed first. This is followed by a discussion of the relationship between the surface properties of the SnO₂ layer and the sensor performance from a thermodynamic point of view. Then, the opportunities and recent progress of chemical sensors fabricated from 1D SnO₂ heterogeneous nanostructures are discussed. Finally, we summarize current challenges in terms of improving the performance of chemical (gas) sensors using such nanostructures and suggest potential applications. Contains 101 references.

Schottky barrier and catalytic effect induced high gas sensing of one-step synthesized Pd–SnO2 nanorods

Uniformly loaded Pd–SnO₂ nanorods are synthesized via a simple one-step hydrothermal route. The gas sensors fabricated from Pd–SnO₂ nanorods exhibit high sensitivity and fast response. The sensor response at 300 °C is up to 9.9, 36.8, 55.6, 89.1 and 168.2 upon exposure to 100, 200, 300, 500 and 1000 ppm ethanol, respectively. And the work temperature can be lowered down to 200 °C. Such behaviors can be attributed to Schottky barrier at Pd/SnO₂ interface and catalytic effect of Pd nanoparticles. Our results open a way for uniform modification of SnO₂ nanorods with Pd nanoparticles and enhancing their gas sensing performance.     

Thermal and structural investigation of SnO<Subscript>2</Subscript>/Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> obtained by the polymeric precursor method

SnO₂-based materials are used as sensors, catalysts and in electro–optical devices. This work aims to synthesize and characterize the SnO₂/Sb₂O₃-based inorganic pigments, obtained by the polymeric precursor method, also known as Pechini method (based on the metallic citrate polymerization by means of ethylene glycol). The precursors were characterized by thermogravimetry (TG) and differential thermal analysis (DTA). After characterization, the precursors were heat-treated at different temperatures and characterized by X-ray diffraction. According to the TG/DTA curves basically two-step mass loss process was observed: the first one is related to the dehydration of the system; and the second one is representative to the combustion of the organic matter. Increase of the heat treatment temperature from 500 to 600°C and 700°C resulted higher crystallinity of the formed product.     

Sensitivity of semiconductor metal oxides (SnO2, WO3, ZnO) to hydrogen sulfide in dry and humid gas media

The sensitivity of semiconductor sensors based on tin (SnO₂), tungsten (WO₃), and zinc (ZnO) oxides and SnO₂ with catalytic admixtures of La₂O₃ and CuO to hydrogen sulfide is studied at H₂S concentration 50 ppm in dry air in the temperature range 100–600°C. Concentration dependences for oxides are studied in the temperature range 350–450°C and H₂S concentration range 0.5–100 ppm at the humidity of gas media 0–80 rel. %. It is shown that, under the specified conditions, the resistance and of sensors to H₂S in air weakly depends on humidity. It was found that sensors based on SnO₂ with an admixture of 3% La₂O₃ working at 350°C are the best for the registration of H₂S by the set of performance and operation characteristics. A presumable mechanism of H₂S interaction with oxide surfaces is considered, according to which each H₂S molecule releases seven electrons to the conductivity zone of the oxide and molecules of metal oxides in the surface layer are, possibly, partially replaced by sulfide molecules.     

Synthesis and study of solid acid materials SnO<Subscript>2</Subscript>/B<Subscript>2</Subscript>O<Subscript>3</Subscript>

SnO₂/B₂O₃ samples were produced by a reaction between SnCl₄, H₃BO₃, and (NH₂)₂CO in a boiling aqueous solution. The Sn: B molar ratio in these samples was 1: 1, 1: 2, and 1: 3. The phase composition and degree of crystallinity of these materials was studied. The surface acidity of the samples was analyzed by the method based on a temperature-programmed reaction of dehydration of 2-methyl-3-butyn-2-ol. Thermal transformations of SnO₂/B₂O₃ samples were examined by means of differential-thermal analysis.     

Resistive-type sensors based on few-layer MXene and SnO2 hollow spheres heterojunctions: Facile synthesis,ethanol sensing performances

High-performance and low-cost gas sensors are highly desirable and involved in industrial production and environmental detection. The combination of highly conductive MXene and metal oxide materials is a promising strategy to further improve the sensing performances. In this study, the hollow SnO₂ nanospheres and few-layer MXene are assembled rationally via facile electrostatic synthesis processes, then the SnO₂/Ti₃C₂T_x nanocomposites were obtained. Compared with that based on either pure SnO₂ nanoparticles or hollow nanospheres of SnO₂, the SnO₂/Ti₃C₂T_x composite-based sensor exhibits much better sensing performances such as higher response (36.979), faster response time (5 s), and much improved selectivity as well as stability (15 days) to 100 ppm C₂H₅OH at low working temperature (200 °C). The improved sensing performances are mainly attributed to the large specific surface area and significantly increased oxygen vacancy concentration, which provides a large number of active sites for gas adsorption and surface catalytic reaction. In addition, the heterostructure interfaces between SnO₂ hollow spheres and MXene layers are beneficial to gas sensing behaviors due to the synergistic effect.     

SnOx thin films with tunable conductivity for fabrication of p–n homo‐junction

Tin oxide (SnO_x) has been widely used for the fabrication of transparent and flexible devices because of its excellent optical and electronic properties. In this work, we established a methodology for the synthesis of SnO_x thin films with p‐type and n‐type tunable conductivity by direct currecnt (DC) magnetron sputtering. The SnO_x thin films changed from p‐type to n‐type by increasing the relative oxygen partial pressure (ppO₂) from 4.8% to 18.5% and by varying the working pressure between 1.8 and 2.5 mTorr. The SnO_x thin films were annealed at 160°C, 180°C, and 200°C for 30 min to promote the formation of the desired crystalline structures. At the annealing temperature of 180°C in air ambient, the SnO_x thin films showed a tetragonal structure with Sn traces. Having found the optimal conditions, we deposited both types of SnO_x thin films with the same tetragonal structure and similar chemical stoichiometry. Also, the conditions to obtain thin films with the highest mobility values for p‐type (1.10 cm²/Vs) and n‐type (22.20 cm²/Vs) were used for fabricating the device. Finally, the implementation of a SnO_x‐based p–n diode was demonstrated using transparent SnO_x thin films developed in this work, illustrating their potential use in transparent electronics.     

Mild Synthesis of Pt/SnO2/Graphene Nanocomposites with Remarkably Enhanced Ethanol Electro‐oxidation Activity and Durability

We have designed a new Pt/SnO₂/graphene nanomaterial by using L ‐arginine as a linker; this material shows the unique Pt‐around‐SnO₂ structure. The Sn²⁺ cations reduce graphene oxide (GO), leading to the in situ formation of SnO₂/graphene hybrids. L ‐Arginine is used as a linker and protector to induce the in situ growth of Pt nanoparticles (NPs) connected with SnO₂ NPs and impede the agglomeration of Pt NPs. The obtained Pt/SnO₂/graphene composites exhibit superior electrocatalytic activity and stability for the ethanol oxidation reaction as compared with the commercial Pt/C catalyst owing to the close‐connected structure between the Pt NPs and SnO₂ NPs. This work should have a great impact on the rational design of future metal–metal oxide nanostructures with high catalytic activity and stability for fuel cell systems.     

Correlation between XPS, Raman and TEM measurements and the gas sensitivity of Pt and Pd doped SnO2 based gas sensors

Nanocrystalline thick-film SnO₂ sensors with different dopants were fabricated by an optimized screen printing process and subsequent annealing. Powders were used as starting materials which were prepared by a wet chemical process from SnCl₄. Microanalysis was performed of both, the precursors and the final sensor materials with their different annealing conditions. Gas sensing tests with CO, CH₄ and NO₂ in air with controlled humidity were correlated with results from X-ray photoemission spectroscopy (XPS), Raman spectroscopy and transmission electron microscopy (TEM). As an interesting result, the distribution of the transition metal dopants Pd and Pt (as deduced from TEM and XPS data) rules out the existence of metallic clusters or even atoms in the metallic state at the surface. This finding does not allow to explain the sensor effects on SnO₂ based materials as usually done by means of spill-over effects or Fermi energy control.     

Engineering of SnO2/TiO2 heterojunction compact interface with efficient charge transfer pathway for photocatalytic hydrogen evolution

Fabricating an efficient charge transfer pathway at the compact interface between two kinds of semiconductors is an important strategy for designing hydrogen production heterojunction photocatalysts. In this work, we prepared a compact, stable and oxygen vacancy-rich photocatalyst (SnO₂/TiO₂ heterostructure) via a simple and reasonable in-situ synthesis method. Briefly, SnCl₂–2H₂O is hydrolyzed on the TiO₂ precursor. After the pyrolysis process, SnO₂ nanoparticles (5 nm) were dispersed on the surface of ultrathin TiO₂ nanosheets uniformly. Herein, the heterojunction system can offer abundant oxygen vacancies, which can act as active sites for catalytic reactions. Meanwhile, the interfacial contact of SnO₂/TiO₂ grading semiconductor oxide is uniform and tight, which can promote the separation and migration of photogenerated carriers. As shown in the experimental results, the hydrogen production rate of SnO₂/TiO₂ is 16.7 mmol h^?1 g^?1 (4.4 times higher than that of TiO₂), which is owing to its good dynamical properties. This work demonstrates an efficient strategy of tight combining SnO₂/TiO₂ with abundant oxygen vacancies to improve catalytic efficiency.     

Template synthesis of tin-doped indium oxide (ITO)/polymer and the corresponding carbon composite hollow colloids

SnO₂, In₂O₃, and Sn-doped In₂O₃ (ITO)/polymer and the corresponding carbon composite hollow colloids are template synthesized. It is essential that the sulfonated gel shell of the cross-linked polystyrene hollow colloid can favorably induce adsorption of target precursors. After being calcined in air to remove the template, SnO₂, In₂O₃, and ITO hollow colloids are obtained. Because the cross-linked polymer gel can be transformed into carbon in nitrogen at higher temperature such as 800 °C, metal oxide/carbon hollow colloids are consequently derived, whose shells are mesoporous. The SnO₂-, In₂O₃-, and ITO-containing polymer or carbon composite hollow colloids will be promising in sensors, catalysts, and fuel cells as electrode materials. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.