Novel benzoferrocenyl chiral ligands: Synthesis and evaluation of their suitability for asymmetric catalysis

Four benzoferrocenyl phosphorus chiral ligands were conveniently prepared in good overall yields. These ligands were found to be stable in solid form and in solution. Two of the four ligands were resolved by chiral HPLC. Unlike a reported bis(phosphino-η⁵-indenyl)iron(II) complex, in which the indenyl ligands undergo ring flipping through an η¹-intermediate, these two ligands were found to be configurationally stable in solution and in solid state. The suitability of these ligands for enantioselective catalysis was assessed in studies on allylic alkylation reactions. When the two less sterically hindered ligands were used, excellent chemical yields were obtained, but the other two more sterically hindered ones gave lower yields. When the two enantiopure ligands were used, enantioselectivity of up to 51% ee was observed. These findings suggest that benzoferrocene derivatives may be used as chiral ligands for asymmetric catalysis.     

The synthesis of P-stereogenic MOP analogues and their use in rhodium catalysed asymmetric addition

The synthesis is reported of novel P-stereogenic binaphthyl substituted monophosphines via a short five-step synthesis using a nickel coupling reaction with separation of the borane-protected diastereomeric products. Extensive coordination studies of these ligands with a number of well-known metal precursors were performed to more effectively understand their behaviour during catalysis.These ligands and some previously reported P-stereogenic ligands were tested in the rhodium catalysed asymmetric addition of phenyl boronic acid to napthaldehyde. These studies in asymmetric catalysis were used to compare the chiral induction of ligands that combine both axial and central chirality with ligands lacking P-stereogenicity.     

New chiral diamide ligands containing redox-active hydroquinone groups. Synthesis and results in the palladium(II)-catalyzed 1,4-diacetoxylation of 1,3-dienes

Chiral ligands 8-11, 22 and 23 were synthesized from different chiral diamines as a new class of ligands for the Pd(II)-catalyzed 1,4-diacetoxylation of 1,3-dienes. The synthesis from the diamines and protected benzoic acids was performed in a few simple steps and gave the ligands in high overall yields. The hydroquinone groups present in the ligands are in situ oxidized to benzoquinone to give the active ligands. Application of these ligands in the 1,4-diacetoxylation reaction afforded the oxidation product with high regio- and diastereoselectivity and an enantiomeric excess up to 42% was obtained. Possible coordination modes of the metal to the ligand are discussed, and experiments were made to investigate the coordination by varying the reaction conditions or making changes to the ligands.     

Isoselective Polymerization of rac-Lactide by Highly Active Sequential {ONNN} Magnesium Complexes

The coordination chemistry and the activities in the ring-opening polymerization catalysis of racemic lactide (LA) of magnesium complexes of a series of {ONNN}-type sequential monoanionic ligands are described. All ligands include pyridyl and substituted-phenolate as peripheral groups. The ligands bearing either chiral or meso-bipyrrolidine cores led to single diastereomeric complexes, whereas the ligands bearing a diaminoethane core led to diastereomer mixtures. All {ONNN}Mg-X complexes [X=Cl, HMDS (hexamethyldisilazide)] led to highly active and isoselective catalysts. The complexes bearing the chiral bipyrrolidine core exhibited the highest activities (full consumption of 5000 equiv. of rac-LA at RT within 5 min) and highest isoselectivities (P_m=0.91), as well as a living character. The complexes of the meso-bipyrrolidine based ligands were almost as active and slightly less stereoselective, while those of the diaminoethane based ligands exhibited reduced activities and isoselectivities.     

Palladium complexes of phosphinamine ligands in the intramolecular asymmetric Heck reaction

The synthesis of two novel cyclisation substrates for the asymmetric intramolecular Heck reaction is reported. Their cyclisation, in addition to a known substrate for cis-decalin formation, were tested with palladium complexes of BINAP and heterobidentate oxazoline-containing ligands. In general BINAP provides a more active catalyst system for the range of substrates tested although excellent enantioselectivities of up to 85% were obtained with the P,N ligands studied. A trend was noted whereby the t-leucine-derived oxazoline ligands were more reactive and enantioselective than the valine-derived analogues. Similarly, the diphenylphosphinoferrocenyloxazoline ligands were more reactive and selective than the corresponding diphenylphosphinophenyloxazoline ligands.     

Dinuclear PdII complexes bearing mixed NHC/Py/PPh3 donor set ligands: Catalytic applications and electrochemical investigations

Bimetallic palladium(II) complexes containing classical NHC donor ligands are becoming increasingly popular owing to their various catalytic applications. However, examples of the aforementioned complexes with mixed NHC/PPh₃ ligands are still rare. Bimetallic palladium(II) complexes possessing these mixed ligands are described starting from a C2-symmetric bis-imidazolium salt containing 4,4′-substituted central biphenyl ring. All the palladium(II) complexes have been tested as precatalysts in α-arylation of oxindole and Suzuki–Miyaura coupling reactions. The complex composed of mixed NHC/PPh₃ donor ligands shows superior catalytic activity compared with the corresponding PEPPSI type complexes when applied in α-arylation of oxindole. The dinuclear complexes display better activity compared with the mononuclear complexes. The preliminary electrochemical measurements show the facile oxidation of Pd^II in the presence of combined NHC/PPh₃ ligands compared with a combination of NHC/Py ligands.     

Synthesis and structures of cadmium(II) complexes of a series of multinucleating N/S donor ligands

The coordination chemistry of a series of bis-bidentate ligands with cadmium(II) ions has been investigated. The ligands, containing two N,S-donor chelating (pyrazolyl/thioether) fragments, have afforded complexes of a variety of structural types (dinuclear M₂L₂ ‘mesocate’ complexes, a one-dimensional chain coordination polymer and a simple mononuclear complex) according to whether the bis-bidentate ligands act as bridges spanning two metal ions, or a tetradentate chelate to a single metal ion. The p-phenylene and m-biphenyl spaced ligands L¹ and L³ form dinuclear M₂L₂ complexes where the ligands are arranged in a ‘side-by-side’ fashion. In contrast the m-phenylene spaced ligand L² forms a one-dimensional coordination polymer where the ligands adopt a highly folded conformation. The 1,8-naphthalene spaced ligand L⁴ adopts a tetradendate chelating mode and affords a simple mononuclear complex.     

Helical binuclear Co complexes of pyriporphyrin analogue for sensing homochiral carboxylic acids

A hybrid macrocycle composed of two bipyridines and two dipyrrins gave biscobalt complexes of figure eight macrocycle conformation with κ²-carboxylate ligands and water ligands at the axial sites. The axial acetate ligands of the biscobalt complex are readily exchanged with carboxylates of α-hydroxyl acids and α-amino acids. The chiral center of the axial carboxylate ligands controls the helical handedness of the macrocycle as evidenced by a typical CD couplet at 550 nm. The substitution labile nature of the biscobalt complex plays a key role for helical chirality induction on the macrocycle upon co-ordination of chiral carboxylate anions.     

Alkyl,Silyl, and Phosphane Ligands—Classical Ligands in Nonclassical Bonding Modes

Alkyl, silyl, and phosphane ligands are amongst the most familiar and ubiquitous ligands in organometallic and coordination chemistry. The C, Si, and P donor atoms of these ligands are sp³‐hybridized and the ligands are related to each other by the isolobal analogy: (CR₃)−(SiR₃)−PR₃. Herein, we demonstrate that although a number of unusual observations concerning the reactivity and bonding of these ligands appears unrelated at first sight, they in fact provide offer an exiting and consistent picture that may form the basis for new paradigms. The characterization of stable complexes in which alkyl, silyl, and phosphane ligands behave as symmetrical bridges confirms that there is no inherent thermodynamic instability associated with these bonding situations, and, in fact, reactivity studies suggest that these ligands should be able to bridge between metal centers in reaction intermediates or transition states.     

Supraphos: A supramolecular strategy to prepare bidentate ligands

Herein, we report a new strategy for the preparation of chelating bidentate ligands, which involves the mixing of two mondentate ligands functionalized with complementary binding sites. The assembly process is based on selective metal-ligand interactions employing phosphite zinc(II) porphyrins 1-6 and the nitrogen-containing phosphorus ligands b-i (Scheme 1). Only 14 monodentate ligands were utilized to generate a library of 48 palladium catalysts based on supraphos-type bidentate ligands. The characterization of rhodium complexes based on representative Supramolecular bidentate ligands and the comparison of their performance in the hydroformylation of styrene will be presented. The current library of catalysts was tested in the asymmetric palladium-catalyzed alkylation of rac-1,3-diphenyl-2-propenyl acetate, which resulted in a large variety in the observed enantioselectivity for the different catalysts. Importantly, small variations in the supraphos building blocks, lead to large differences in the enantioselectivity imposed by the catalyst, the most selective catalyst producing 97% ee.     

Planar 2‐Pyridyl‐1,2,3‐triazole Derived Metallo‐ligands: Self‐assembly with PdCl2 and Photocatalysis

Self‐assembled metallosupramolecular architectures (MSAs) with built‐in functionalities such as light‐harvesting metal centers are a promising approach for developing emergent properties within discrete molecular systems. Herein we describe the synthesis of two new but simple “click” ligands featuring a bidentate 2‐pyridyl‐1,2,3‐triazole chelate pocket linked to a monodentate pyridyl (either 3‐ or 4‐substituted, L1 and L2 ) unit. The ligands and the corresponding four Pd^IIand Pt^IImetallo‐ligands ( Pd1 , Pd2 , Pt1 and Pt2 ) were synthesized and characterized using nuclear magnetic resonance (NMR) spectroscopy, electrospray ionization mass spectrometry (ESI‐MS), and X‐ray crystallography. Solid‐state characterization of the series of ligands and metallo‐ligands revealed that these compounds display a co‐planar conformation of all the aryl units. The Pt^IIcontaining metallo‐ligands ( Pt1 and Pt2 ) were found to assemble into square ( Sqr ) and triangular ( Tri ) shaped architectures when combined with neutral PdCl₂ linker units. Additionally, the ability of the Pt^IImetallo‐ligands and Tri to photocatalyze the cycloaddition of singlet oxygen to anthracene was investigated.     

Synthesis and photoluminescence properties of BF2 complexes with 1,3-diketone ligands

BF₂ complexes with 1,3-diketone ligands were synthesized, and their optical and electrochemical properties were studied. The colors of the complexes varied depending on the structures of the 1,3-diketone ligands. The absorption and emission maxima of the complexes with 1,3-diaryl-1,3-diketone ligands were considerably red shifted as compared to those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands, suggesting an extended π-conjugation of the 1,3-diaryl-1,3-diketone moieties. The molar absorption coefficients and quantum yields of the complexes with 1,3-diaryl-1,3-diketone ligands were larger than those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands. Cyclic voltammetry measurements revealed that the reduction potentials of the BF₂ complexes were higher than those of the free ligands. These complexes exhibited various emission colors in the solid states due to the intermolecular interactions.     

Poly­[manganese(II)‐μ2‐benzidine‐κ2N:N′‐μ3‐bi­phenyl‐2,2′‐di­carboxylato‐κ4O:O′,O′′:O′′′]

The title compound, [Mn(C₁₄H₈O₄)(C₁₂H₁₂N₂)]_n, with a novel three‐dimensional framework, has been prepared by a hydro­thermal reaction at 433 K. Each Mn atom lies on a twofold axis in a slightly distorted octahedral geometry, coordinated by two N atoms from two benzidine ligands and four O atoms from three symmetry‐related biphenyl‐2,2′‐dicarboxylate (bpdc) ligands. The benzidine ligands lie about inversion centres and the bpdc ligands about twofold axes. Each bpdc ligand is bonded to three Mn ions to form a continuous chain of metal ions. The bpdc ligands are accommodated in a series of distorted holes resembling hexagonal prisms.     

Mössbauer studies of iron(III)-(indole-3-alkanoic acids) systems in frozen aqueous solutions

Summary This paper describes the M?ssbauer investigations of iron(III) salts in aqueous solutions in the presence of indole-3-alkanoic acid ligands. The measurements showed two parallel reactions between the ligands and ferric ions: a complex formation and a redox process. The oxidation process takes place in the ligands, and a part of Fe³⁺is reduced to Fe²⁺.     

Syntheses and mesomorphic properties of new oxygen-bridged dicopper complex homologous derived from azo-containing salicylaldimine Schiff base ligands

The synthesis, characterization and liquid crystal properties of a homologous series of new tridentate 5-((4-ⁿalkoxyphenyl) azo)-N-(3-ydroxypropyl) salicylaldimine ligands (alkoxy = octloxy, decyloxy, dodecyloxy and tetradecyloxy) and their dicopper(II) complexes are reported. These ligands were prepared by the condensation of the 5-((4-ⁿalkoxyphenyl)azo)salicylaldehydes homologous with 3-amino-1-propanol. The ligands and their dicopper complexes have been characterized by IR, ¹H NMR, mass spectroscopy and elemental analyzes. The liquid crystalline properties of the ligands and the related dicopper complexes were studied by differential scanning calorimetry (DSC) and by using a polarizing microscope equipped with a heating and cooling stage. None of the free ligands exhibit liquid crystalline behavior but all of the dicopper complexes demonstrate a smectic A mesophase.     

Synthetic, structural, and antimicrobial studies of organotin(IV) complexes of semicarbazone, thiosemicarbazone derived from 4-hydroxy-3-methoxybenzaldehyde

Reaction of dibutyltin dichloride, dimethyltin dichloride, and tributyltin chloride with ligands derived from thiosemicarbazone and semicarbazone leads to the formation of a new series of organotin(IV) complexes of general formula R₂SnCl₂·L and R₃SnCl·L (where L ligands derived from the condensation of thiosemicarbazide and semicarbazide with 4-hydroxy-3-methoxybenzaldehyde). The authenticity of these ligands and their metal complexes have been established on the basis of elemental analysis, conductance measurements, molecular weight determinations, infrared, ¹H NMR, ¹³C NMR, ¹¹⁹Sn NMR, and UV spectral studies. These studies showed that the ligands coordinate to the metal atom in a bidentate. An octahedral structure is proposed for the organotin(IV) complexes. The ligands and its metal complexes are screened for their antimicrobial activities against some Gram-positive and Gram-negative bacteria, and fungus. The studies demonstrated that metalation can increase the antimicrobial activity rather than the free ligands.     

Control of structure and particle size of iron oxide on carrier oxide by the sol-gel method using organic polydentate ligands

It was tried to control the structure and particle size of iron oxide supported on a carrier by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands. The iron oxide/carrier composites were prepared by calcining carrier oxides impregnated with organic ligands and Fe(NO₃)₃·9H₂O. When ligands were diacetone alcohol and ethanol, the structure of the iron oxide was exclusively corundum. But, with ligands such as ethylene glycol, citric acid and galacturonic acid, the structure of the iron oxide changed from corundum to spinel as the amount of ligands used increased. With both series of ring and straight chain saccharides, size of the iron oxide particles changed depending on saccharides used. It was thus concluded that the structure and particle size of iron oxide supported on a carrier can be regulated by using organic polydentate ligands.     

Electrochemistry and complexation of Josiphos ligands

The oxidative electrochemistry of 11 chiral bis-phosphinoferrocene ligands, all within the Josiphos class of ligands, was examined in methylene chloride. The oxidation of these ligands displays multiple waves of varying chemical reversibility. Palladium(II) and platinum(II) complexes with the general formula [MCl₂(P-P)] (M = Pd or Pt; P-P = Josiphos) were prepared, characterized by NMR and cyclic voltammetry. The electrochemistry simplifies greatly upon coordination of the Josiphos ligands. The X-ray structures of a palladium(II) and platinum(II) complex of the same Josiphos ligand are reported.     

Effect of P-Containing Ligands on the Structural and Optical Properties of (CdSe)<Subscript>n</Subscript> (n = 3, 6, 10) Clusters

The effect of phosphorus-containing ligands on the structure, energetics and properties of the (CdSe)_n clusters (n = 3, 6, and 10) with different number of PH₃ and PMe₃ ligands were studied by using density functional theory calculations. The P atom in the ligand interacts with Cd and forms a strong Cd–P coordination bond. The introduction of ligands does not change the cluster architecture, but leads to considerable changes in Cd–Se bondlength, charge distribution, binding energy, HOMO–LUMO gap and optical absorption. The ligand influence is enhanced with increasing ligand coverage. A blueshift in absorption band was predicted for the clusters with increasing ligands, resulting from the electron donating characteristics of the ligands that hamper electron transition from Se to Cd. As P-containing ligands are often used in the preparation of CdSe nanocrystals, our calculations reveal the influence of ligand-cluster interaction on the cluster geometrical and electronic properties, which would be helpful for the nanocrystal design and synthesis.     

Synthesis of chiral sulfonamide/Schiff base ligands

We report a facile two step synthesis of chiral ligands for bonding to transition metals. The ligands are easily prepared from trans-1,2-diaminocyclohexane by reaction with sulfonyl chlorides to give amino-sulfonamide compounds. These intermediates are then condensed with salicylaldehyde derivatives to provide sulfonamide/Schiff base compounds which represent a new class of chiral ligands.