The nucleophilic living ring‐opening polymerization of N‐substituted glycine N‐carboxyanhydrides using solid‐phase synthesis resins is reported. By variation of experimental parameters, products with near Poisson distributions are obtained. As opposed to reversible deactivation radical polymerization, the living polymerization is demonstrated to be viable to high monomer conversion and through multiple monomer addition steps. Successful preparation of a multiblock copolypeptoid is proof for a highly living and robust character of the solid‐phase peptoid polymerization.
The synthesis of poly(β‐alanine) by Candida antarctica lipase B immobilized as novozyme 435 catalyzed ring‐opening of 2‐azetidinone is reported. After removal of cyclic side products and low molecular weight species pure linear poly(β‐alanine) is obtained. The formation of the polymer is confirmed with 1H NMR spectroscopy and MALDI‐TOF mass spectrometry. The average degree of polymerization of the obtained polymer is limited to = 8 by its solubility in the reaction medium. Control experiments with β‐alanine as a substrate confirmed that the ring structure of the 2‐azetidinone is necessary to obtain the polymer.
Summary: Epoxy nanocomposites containing rod‐like silicate (attapulgite) were prepared using a simple organic modification to the nanorods. The modification led to effective interfacial adhesion between the ceramic nanorods and the epoxy resin and hence good load transfer. Scanning electron microscopy examination revealed a uniform dispersion of nanorods in the epoxy resin. Compared to the neat resin, nanocomposites with 7.47 vol.‐% nanorods exhibited an increase in the (rubbery state) storage modulus of 122.5%. In addition, the nanocomposites exhibited improved dimensional stability both above and below the Tg.
Storage modulus of the neat resin and nanocomposites. 相似文献
Polymer hydrogels with characteristics distinct from those of solid materials are one of the most promising candidates for smart materials. Here, we report that a nanocomposite hydrogel (NC gel) consisting of a unique polymer/clay network structure, can exhibit complete self‐healing through autonomic reconstruction of crosslinks across a damaged interface. Mechanical damage in NC gels can be repaired without the use of a healing agent, and even sections of NC gels separated by cutting, from whichever the same or different kinds of NC gel, perfectly (re‐)combine by just contacting the cut surfaces together at mildly elevated temperatures. In NC gels, the autonomic fusion of cut surfaces as well as the self‐healing could be achieved not only immediately after being cut but also after a long waiting time.
Well‐defined diblock condensation copolymers composed of an aromatic polyamide and an aromatic polyether have been synthesized by means of successive chain‐growth condensation polymerizations. Polymerization of a polyamide monomer with an orthogonally difunctional initiator is accompanied with side reactions. On the other hand, polymerization with a monofunctional initiator afforded well‐defined polyamide, which has been converted into a macroinitiator by introduction of a terminal 4‐fluorobenzophenone unit. Well‐defined diblock copolymers are obtained by polymerization of a polyether monomer in the presence of this macroinitiator.
Hollow polyphosphazene microcapsules have been fabricated by the covalent layer‐by‐layer assembly of polydichlorophosphazene (PDCP) and hexamethylenediamine (HDA) on aminosilanized silica particles, followed by core removal in a HF/NH4F solution. The hollow and intact microcapsules in both wet and dry states have been characterized by transmission electron microscopy and confocal laser scanning microscopy. The chemical structure of the microcapsules has been verified by FT‐IR spectroscopy. The microcapsules could be hydrolytically degraded in a phosphate buffer at biological pH.
A new class of biodegradable cationic macromolecules for DNA binding and condensation was developed by end‐group‐functionalization of poly(trimethylene carbonate). A series of one‐ and two‐armed structures was synthesized and their interaction with DNA was evaluated. To aid data interpretation, a non‐linear modeling method was applied to show efficient DNA binding that was intimately related to cationic charge density and macromolecular architecture. One‐armed, low charge density structures were consistently found to bind to DNA at lower charge ratios than their two‐armed, high charge density counterparts. This suggests that polymer backbone structure and characteristics are important considerations in the development of efficient cationic polymer systems for DNA condensation and delivery.
This paper highlights the powerful combination of reversible addition–fragmentation chain transfer (RAFT) radical polymerization and various click/coupling chemistries. This is not an exhaustive review but rather an overview demonstrating the impressive possibilities that the “marriage” of these two synthetic approaches offers in modern macromolecular design and synthesis.
A new dendritic heteroarm star copolymer that contains multi‐alternating arms of poly(ethylene oxide‐tetrahydrofuran) (P(EO‐THF)) and poly(methyl methacrylate) (PMMA) on a dendritic polyester core has been synthesized by a ‘core‐first’ approach by combination of sequential cationic ring‐opening polymerization (CROP) and reversible addition–fragmentation transfer (RAFT) polymerization initiated by a dendritic macroinitiator ( 3 ) capped with multi‐alternating terminal carboxylic acid groups (used directly to initiate the ROP of THF in the presence of EO as a polymerization promoter to attain P(EO‐THF) arms) and dithiobenzoate groups (used to initiate RAFT polymerization of MMA to attain PMMA arms). The structures of the products were confirmed by NMR spectroscopy, GPC‐MALLS, and DSC measurements.
An organosilane with an alkyne group at the non‐condensable end, [(2‐propynylcarbamate)propyl]triethoxysilane, has been synthesized. Condensation of this organosilane with tetraethoxysilane can be achieved by a co‐condensation strategy to produce silica nanoparticles with surface alkyne functionality. The size and uniformity of size distribution of the silica nanoparticles are influenced by varying the concentration of the added organosilane. The alkyne‐functionalized silica nanoparticles are coupled directly with azide‐modified polymers by ‘click chemistry’ to yield organic–inorganic hybrid nanomaterials.
We applied 1,3‐dipolar cycloaddition to bind ethynylferrocene onto 6I‐azido‐6I‐deoxycyclomaltoheptaose under microwave assisted conditions. The process was investigated by 1H NMR, FT‐IR spectroscopy, and MALDI‐TOF mass spectrometry. The ability of the synthesized compound to self‐organize to cyclic supramolecular structures was investigated by dynamic light scattering measurements and cryo‐transmission electron microscopy.
A PFS/PLA block copolymer was studied to probe the effect of strong surface interactions on pattern formation in PFS block copolymer thin films. Successful synthesis of PFS‐b‐PLA was demonstrated. Thin films of these polymers show phase separation to form PFS microdomains in a PLA matrix, and ultrathin films (<5 nm) formed SINPATs on silicon and mica. The SINPATs consisted of strongly surface‐adsorbed PLA blocks on top of which the PFS blocks dewetted into sphere‐like features. The lateral spacing between these features was regular, and was typically much larger than the length scale associated with regular block copolymer phase separation.
The dextran‐allyl isocyanate/poly(N‐isopropylacrylamide) (Dex‐AI/PNIPAAm) hydrogel was designed and prepared by copolymerization of the modified dextran with N‐isopropylacrylamide (NIPAAm). This novel Dex‐AI/PNIPAAm hydrogel is biodegradable and intelligent due to its biodegradable dextran linkage and thermosensitive PNIPAAm moiety. With an increase in dextran content, it exhibits the increased lower critical solution temperature (LCST) and decreased porous microstructure. Also, the thermosensitivity of this hydrogel is also controllable and adjustable depending on the different compositions.
SEM micrographs of the Dex‐AI/PNIPAAm hydrogels. 相似文献
Bis(2,2′:6′,2″‐terpyrid‐4′‐yl) diethylene glycol was synthesized as a monomer unit and further utilized for polymerization with FeCl2 in order to form water‐soluble coordination polymers. Viscosity measurements and film‐forming properties indicate the formation of linear coordination polymers or larger ring structures. The terpyridine/iron(II) complexes are stable up to temperatures of 210 °C, but can be uncomplexed by the addition of an excess of a strong competitive ligand (HEDTA) under mild conditions.
The distinct polymeric nanocapsule hybrid‐structures consisting of LCs in the core and PMMA or polystyrene in the corona domain were prepared by one‐step miniemulsion polymerization. Nematic LCs (4′‐pentyl‐4‐biphenylcarbonitrile and 4′‐heptyloxy‐4‐biphenylcarbonitrile) were especially adopted as hydrophobes that can suppress Ostwald ripening and had an important role to stabilize the miniemulsion droplets and control the size distributions of the latexes. The polymeric nanocapsule structures with narrow size distributions were confirmed by TEM and DLS measurements.
This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.
