CAN-promoted, diastereoselective synthesis of fused 2,3-dihydrofurans and their transformation into tetrahydroindoles

The reaction between 1,3-cyclohexanediones and chalcones (or their vinilogs) in the presence of 2.5 equiv of cerium(IV) ammonium nitrate afforded trans-2-arylcarbonyl-3-aryl (or styryl)-2,3,6,7-tetrahydrobenzofuran-4(5H)-ones in good to excellent yields and in high diastereoselectivities. The method was also extended to the preparation of derivatives of the 5,6-dihydro-2H-cyclopenta[b]furan-4(3H)-one system. The fused 2,3-dihydrofuran derivatives were transformed into 1-alkyl-2-acyl-3-aryl-6,7-dihydroindole-4(5H)-ones by 2,3-dehydrogenation followed by reaction with primary amines. The direct reaction of the tetrahydrobenzofuran-4(5H)-one compounds derived from dimedone with amines gave 1-alkyl-2-alkylimino-3-aryl-6,7-dihydroindole-4(5H)-ones, while starting materials derived from 1,3-cyclohexanedione underwent an unprecedented 2-deacylation reaction and gave 1-alkyl-3-aryl-6,7-dihydroindole-4(5H)-ones.     

The reaction between [η5-C5H5M(CO)3]2, η5-C5H5M(CO)3I (M  Mo,W) and isonitriles

The reaction between η⁵-C₅H₅M(CO)₃I (M  Mo, W) and isonitriles, RNC, (RNC  PhCH₂NC, t-BuNC and 2,6-dimethylphenylisocyanide (XyNC)) is catalysed by the dimer [η⁵-C₅H₅M(CO)₃]₂ (M = Mo, W) to yield η⁵-C₅H₅M(CO)_3?n(RNC)_nI (n = 1–3) and [η⁵-C₅H₅Mo(RNC)₄]I. The complexes (η⁵-C₅H₅)₂Mo₂(CO)₆?n(RNC)_n (n = 1, RNC = MeNC, PhCH₂NC, XyNC, t-BuNC; n = 2, RNC = t-BuNC) have been prepared in moderate yield from the direct reaction between [η⁵-C₅H₅Mo(CO)₃]₂ and RNC, and also catalyse the above reaction. A reaction pathway involving a fast non-chain radical mechanism and a slower chain radical mechanism is proposed to account for the catalysed reaction.     

Stereoselective synthesis of β-substituted-l-threonines from enantiopure 5-acetyl-2-isoxazolines

Enantiomerically pure, 3-methyl- or 3-ethoxycarbonyl-substituted (5S)- and (5R)-5-acetyl-2-isoxazolines were obtained from the corresponding racemic mixtures by means of an enzymatic reduction with baker’s yeast, followed by the separation of the enantiopure syn- and anti-alcohols and oxidation of the alcohol group. The reaction between these ketones and (2R)-Schöllkopf’s bislactim ether azaenolate was studied: using (5S)- and (5R)-3-methyl derivatives, two diastereoisomeric adducts were obtained in good yield and stereoselectivity, whereas reaction with the (5S)- and (5R)-3-ethoxycarbonyl derivatives led to a complex mixture of products. Subsequent controlled hydrolysis of the pyrazine ring led to β-(3-methyl-4,5-dihydro-isoxazol-5-yl)-l-threonines methyl ester together with the corresponding (R)-valine dipeptides.     

Henry reaction catalyzed by recoverable enantioselective catalysts based on copper(II) complexes of α-methoxypoly(ethylene glycol)-b-poly(l-glutamic acid) and imidazolidine-4-one ligands

Herein we describe the preparation and characterization of a recoverable catalyst for a Henry reaction based on a Cu(II) complex of block copolymer α-methoxypoly(ethylene glycol)-b-poly(l-glutamic acid) with (2R,5S)- or (2S,5R)-5-isopropyl-5-methyl-2-(pyridine-2-yl)imidazolidine-4-one. The reactions of substituted aldehydes with nitromethane catalyzed by these catalysts proceed with high chemical yield (70–98%) and with high enantioselectivity (61–92% ee). The reaction mixture is in the form of a colloid system and is formed by self-organized aggregates of the catalysts with average hydrodynamic particle size of 189 ± 3 nm (DLS). After sevenfold recycling, the catalyst exhibited no decrease in the enantioselectivity and only a slight decrease (ca. 18%) in the yield for the Henry reaction of nitromethane with 2-methoxybenzaldehyde.     

Synthesis of 5H-pyridazino[4,5-b]indoles and their benzofurane analogues utilizing an intramolecular Heck-type reaction

The title ring systems were prepared from pyridazin-3(2H)-one precursors in novel, efficient pathways. 2-Methylbenzo[b]furo[2,3-d]pyridazin-1(2H)-one was synthesized via a regioselective nucleophilic substitution reaction of a 2-methyl-4,5-dihalopyridazin-3(2H)-one with phenol followed by an intramolecular Heck-type reaction. The same molecule and its 6-phenyl analogue were also prepared via reaction of 2-methyl-5-iodopyridazin-3(2H)-one or 2-methyl-5-chloro-6-phenylpyridazin-3(2H)-one, respectively, with 2-bromophenol or 2-iodophenol followed by Pd-catalyzed cyclodehydrohalogenation. Moreover, a new approach for the synthesis of 2-methyl-2,5-dihydro-1H-pyridazino[4,5-b]indol-1-ones was also elaborated utilizing a Heck-type ring closure reaction on 5-[(2-bromophenyl)amino]-2-methylpyridazin-3(2H)-ones which were obtained via Buchwald-Hartwig amination of 2-methyl-5-halopyridazin-3(2H)-ones with 2-bromoaniline.     

Synthesis of glyco-1-ynitols via 1,1-dibromo-1-alkenes from partially and unprotected aldoses

We report the synthesis of 1,1-dibromo-1-alkenes from partially and unprotected aldoses and the synthesis of glyco-1-ynitols from these dibromocompounds. The 1,1-dibromo-1-alkenes were obtained by the reaction of dibromomethyl-triphenylphosphonium bromide in the presence of zinc in refluxing 1,4-dioxane. As an example, when the reaction is performed on 2-deoxy-5-O-trityl-d-ribofuranose (1) the corresponding 1,1-dibromo-1-olefin, (2R,3S)-6,6-dibromo-1-O-trityl-hex-5-ene-1,2,3-triol (12), is obtained in 89% yield. These smooth reaction conditions led also to the achievement of the other olefins from other sugars with good yields (44-90%). The reaction of these olefins with n-butyllithium in THF at low temperature afforded the corresponding alkynes. So the reaction of (2R,3S)-6,6-dibromo-1-O-trityl-hex-5-ene-1,2,3-triol (12) with this alkyllithium reagent led to (2R,3S)-1-O-trityl-hex-5-yne-1,2,3-triol (23) in 87% yield. Other glyco-1-ynitols were obtained with satisfying yields (64-87%).     

Hexafluorothioacetone based synthesis of fluorinated heterocycles

Cycloadducts of hexafluorothioacetone (HFTA) were prepared in high yield by a CsF catalyzed reaction between readily available 2,2,4,4-tetrakis-(trifluoromethyl)-1,3-dithietane (as a source of HFTA) with conjugated electron-rich hydrocarbon dienes, such as cyclopentadiene, 2,3-dimethylbuta-1,3-diene, cyclohexa-1,3-diene or (1Z,3Z)-cyclohepta-1,3-diene. Cyclohexa-1,4- and (1Z,5Z)-cycloocta-1,5-dienes, also undergo the reaction with in situ generated HFTA, but form the products of insertion of HFTA into the C-H bond of the diene as a result of ene-reaction. The highly selective reaction of HFTA with (1Z,3Z,5Z)-cyclohepta-1,3,5-triene and (1Z,3Z,5Z,7Z)-cycloocta-1,3,5,7-tetraene leads to the formation of cycloadducts derived from exclusive addition of thioacetone to the corresponding bicyclic isomers—bicyclo[4.1.0]hepta-2,4-diene or bicyclo[4.2.0]octa-2,4,7-triene, respectively. The corresponding cycloadducts of HFTA with 2,3-dimethylbutadiene-1,3-cyclohexa-1,3-cyclohexa-1,4-dienes and (1Z,3Z,5Z)-cyclohepta-1,3,5-triene were also prepared by direct reaction of sulfur/hexafluoropropene/KF and the corresponding hydrocarbon substrate at 35-45 °C in DMF.     

1,3- versus 1,4-[π4+π2] Cycloadditions between methyl glyoxylate oxime and cyclopentadiene or cyclopentene

The acid catalyzed cycloaddition reaction of methyl glyoxylate oxime with cyclopentadiene (CPD) afforded the corresponding aza-Diels–Alder adducts, the endo and exo isomers of (±)-methyl 2-hydroxy-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylates, and as the major product a 1,3-cycloadduct, methyl (1RS,4RS,5RS)-(2-oxa-3-azabicyclo[3.3.0]oct-7-ene)-4-carboxylate. The similar reaction using cyclopentene (CP) provided only the 1,3-cycloadduct methyl (1SR,4RS,5SR)-(2-oxa-3-azabicyclo[3.3.0]octane)-4-carboxylate. The influence of various parameters on the reaction outcome was studied and, based on the results obtained, a mechanism for the formation of both 1,3- and 1,4-cycloadducts is proposed. The structure of all adducts was confirmed by NMR spectroscopic data and/or by X-ray crystallography.     

An investigation into the mechanism of the imidazolidinone catalyzed cascade reaction

The cascade reaction of α,β-unsaturated butyric aldehydes with 2-methyl furan and chlorinated quinone catalyzed by a (2S,5S)-5-benzyl-2-tert-butyl-3-methylimidazolidin-4-one·TFA was investigated by using density functional theory (DFT) calculations at the PCM(EtOAc)/B3LYP/6-311++G(d,p)//B3LYP/6-31G(d) level to (a) confirm the detailed reaction mechanism and key factors controlling the enantioselectivity; and (b) check the models of the iminium ion formation and hydrolysis process that were carried out in another reaction. Two favorable reaction channels, corresponding to the enantioselectivity of the (2R,3S)-product and (2S,3S)-product, have been characterized. The enantioselectivity is controlled by the steps involved in the formation of the C–C bond and the C–Cl bond in the iminium catalysis and the enamine catalysis, respectively. The calculated results explain the reaction mechanism and the enantioselectivity, which are in agreement with experimental observations, and may be helpful for understanding the reaction mechanism of similar cascade reactions.     

The hydrogenation of α-methylstyrene by tricarbonyl(cyclopentadienyl)hydride compounds of tungsten and molybdenum; support for a radical mechanism

Rates of reaction of the hydrides of tungsten and molybdenum of the form HM(η5-C₅H₅(CO)₃, with β-methylstyrene have been determined. The rate law is first order in olefin and in hydride. A mechanism involving a rate limiting step of hydrogen atom transfer to the olefin is consistent with the rate law, isotope effect and the absence of CO inhibition. The activation enthalpy for the reactions of HW(η5-C₅H₅)(CO)₃ and HMo(η5-C₅H₅)(CO)₃ are 97.5 ± 4.2 and 89.1 ± 3.3 kJ/mol, respectively. The rate constant for the reaction of styrene and HW(β5-C₅H₅)(CO)₃ is approximately that of β-methylstyrene, while β-methylstyrene was not observed to react under the conditions of the previous determinations. This suggests that attack by the hydride occurs at the β-carbon and this process is inhibited by substituents at that location.     

Three-component sequential synthesis of N,N′-disubstituted 5-arylidenedihydropyrimidine-2,4-dione

A three-component sequential process consisting in (1) in situ formation of carbodiimides by Staudinger reaction, (2) reaction with 2-(bromomethyl)-3-aryl-2-propenoic acids, and (3) final cyclization of the resulting N-acylurea intermediates in order to obtain the synthesis of an array of N,N′-disubstituted 5-arylidenedihydropyrimidine-2,4-dione under mild conditions is presented.     

Synthesis of 5-alkyl-1,3,5-triazinan-2-ones and 5-alkyl-1,3,5-triazinane-2-thiones using Cu- and Sm-containing catalysts

Efficient procedures have been developed for the synthesis of 5-alkyl-1,3,5-triazinan-2-ones and 5-alkyl-1,3,5-triazinane-2-thiones by reaction of urea (thiourea) with primary alkylamines and N,N,N′,N′-tetramethylmethylenediamine and by reaction of primary amines with N,N′-bis(dimethylaminomethyl)urea(thiourea) in the presence of Cu- and Sm-containing catalysts.     

Nitropyrazoles 22. On reactivity of 3,5-dinitro-4-(phenylsulfonyl)pyrazole and its N-methyl derivative

3,5-Dinitro-4-(phenylsulfonyl)pyrazole (5) obtained by oxidation of 3,5-dinitro-4-(phenylthio)pyrazole with 30% H₂O₂ in AcOH was involved into nucleophilic substitution reaction with thiophenol, which proceeded with substitution of the phenylsulfonyl group at position 4. N-Methyl-3,5-dinitro-4-(phenylsulfonyl)pyrazole obtained by methylation of 5 with dimethyl sulfate was involved into nucleophilic substitution reaction with thiophenol, p-bromophenol, and morpholine with the regioselective substitution of the nitro group at position 5 to form 5-R-3-nitro-4-(phenylsulfonyl)pyrazoles.     

Synthesis of (zinc(II) phthalocyanine)-containing cellulose derivative using phthalocyanine-ring formation reaction

2,3-Di-O-myristyl-6-O-(zinc(II) phthalocyaninyl) cellulose (5) was synthesized from cellulose (1) by five reaction steps via 6-O-(3′,4′-dicyanophenyl)-2,3-di-O-myristyl cellulose (4). The key reaction was phthalocyanine-ring formation on a cellulose backbone, that is, the reaction of compound 4 with o-phthalodinitrile in the presence of hexamethyldisilazane and zinc acetate in DMF afforded to compound 5 in 35.4 % yield. Consequently, the degree of substitution with phthalocyanine moieties of compound 5 was 0.38. The LB monolayer film of compound 5 on an indium tin oxide (ITO) electrode was found to show photocurrent generation performance at 680 nm.     

Novel and efficient synthesis of triazolobenzodiazepine analogues through the sequential Ugi 4CR-click-N-arylation reactions

An efficient approach for the synthesis of N-alkyl-2-aryl-2-(6-oxo-4H-benzo[f][1,2,3]triazolo[1,5-a][1,4]diazepin-5(6H)-yl)acetamides is described. The protocol involves Ugi four-component reaction of 2-bromobenzoic acid, propargylamine, aldehydes and isocyanides followed by in situ sequential click reaction of azide ion with triple bond and N-arylation reaction to afford desired products in good to excellent yields.     

Preparation of 2-aminosubstituted 3H-imidazo[4,5-c]quinolin-4(5H)-ones by palladium-assisted internal biaryl coupling reaction

Representatives of the 3H-imidazo[4,5-c]quinolin-4(5H)-ones have shown interesting biological activity. We have found 2-aminosubstituted 3H-imidazo[4,5-c]quinolin-4(5H)-one as a potent dipeptidyl peptidase 4 inhibitor. However effective synthesis of this nucleus with various substituents at the 6-9-positions has not been reported. We report herein the development of a novel and efficient synthesis of 2-aminosubstituted 3H-imidazo[4,5-c]quinolin-4(5H)-ones by palladium-assisted internal biaryl coupling reaction. Our optimization of the reaction conditions revealed that the most important factors for this reaction are use of silver carbonate as a base and high reaction temperature.     

Synthesis and structure of the products of the reactions of 3-chloro-5-methoxy-4-[(4-methylphenyl)sulfanyl]-2(5H)-furanone with N,N-binucleophilic agents

Reactions of 3-chloro-5-methoxy-4-[(4-methylphenyl)sulfanyl]-2(5H)-furanone with different nitrogen-containing binucleophilic agents were studied. The reaction with hydrazine monohydrate resulted in the formation of 1,5-dihydro-2H-pyrrol-2-one and pyridazin-3(2H)-one derivatives, whereas the reaction with phenylhydrazine led exclusively to 1-phenylamino-1,5-dihydro-2H-pyrrol-2-one. The reaction with ethylenediamine resulted in the isolation of 1,2-bis[2-oxo-1,5-dihydro-2H-pyrrol-1-yl]ethane: the enantiomeric dl-pair and two poly-morphic modifications of meso-form, which were characterized by X-ray crystallography.     

Aerobic oxidation of cumene to cumene hydroperoxide catalyzed by metalloporphyrins

A protocol for the aerobic oxidation of cumene to cumene hydroperoxide (CHP) catalyzed by metalloporphyrins is reported herein. Typically, the reaction was performed in an intermittent mode under an atmospheric pressure of air and below 130°C. Several important reaction parameters, such as the structure and concentration of metalloporphyrin, the air flow rate, and the temperature, were carefully studied. Analysis of the data obtained showed that the reaction was remarkably improved by the addition of metalloporphyrins, in terms of both the yield and formation rate of CHP while high selectivity was maintained. It was discovered that 4 or 5 h was the optimal reaction time when the reaction was catalyzed by monomanganese-porphyrin ((p-Cl)TPPMnCl) (7.20 × 10^?5 mol/l) at 120°C with the air flow rate being 600 ml/min. From the results, we also found that higher concentration of (p-Cl)TPPMnCl, longer reaction time and higher reaction temperature were all detrimental to the production of CHP from cumene. Studies of the reaction kinetics revealed that the activation energy of the reaction (E) is around 38.9 × 10⁴ kJ mol^?1. The low apparent activation energy of the reaction could explain why the rate of cumene oxidation to CHP in the presence of metalloporphyrins was much faster than that of the non-catalyzed oxidation.     

High-efficacy antimicrobial cellulose grafted by a novel quaternarized N-halamine

A novel quaternarized N-halamine precursor (3-chloro-2-hydroxypropyl)-(5, 5-dimethylhydantoinyl-1-ylmethyl)-dimethylammonium chloride (CDDAC), has been synthesized by a very facile two-step reaction. The two-step synthesis of CDDAC occurred at room temperature with common reactors, so the production of CDDAC could be easily enlarged to an industrial scale. Without any work-up, the final reaction solution which contained CDDAC could be directly used as grafting solution. CDDAC could be effectively grafted onto the surface of cellulose by a dehydrochlorination reaction. CDDAC grafted on cellulose was converted to N-halamine structure which showed powerful antimicrobial property by a chlorination reaction in the diluted NaClO solution. The antimicrobial tests showed that the chlorinated cellulose grafted with CDDAC was capable of 5-log inactivation of S. aureus and E. coli within 5 min. Also, the washing durability and storage stability of chlorinated cellulose grafted with CDDAC were investigated.     

Diastereoselective Mukaiyama aldol reaction of (N-alkyl) isatins with 2-(trimethylsilyloxy)furan by using lanthanum triflate

An efficient vinylogous Mukaiyama aldol reaction (VMAR) of 2-(trimethylsilyloxy)furan with various (N-alkyl)isatins is described in the presence of lanthanum(III) triflates (5 mol %). The reaction proceeds rapidly and affords the corresponding 3-hydroxy-(5-oxo-2,5-dihydrofuran-2-yl)indolin-2-one in high yields with good diastereoselectivities (threo:erythro ratio up to ≤95:5).