Covalent Adaptable Networks with Tunable Exchange Rates Based on Reversible Thiol–yne Cross-Linking

The design of covalent adaptable networks (CANs) relies on the ability to trigger the rearrangement of bonds within a polymer network. Simple activated alkynes are now used as versatile reversible cross-linkers for thiols. The click-like thiol–yne cross-linking reaction readily enables network synthesis from polythiols through a double Michael addition with a reversible and tunable second addition step. The resulting thioacetal cross-linking moieties are robust but dynamic linkages. A series of different activated alkynes have been synthesized and systematically probed for their ability to produce dynamic thioacetal linkages, both in kinetic studies of small molecule models, as well as in stress relaxation and creep measurements on thiol–yne-based CANs. The results are further rationalized by DFT calculations, showing that the bond exchange rates can be significantly influenced by the choice of the activated alkyne cross-linker.     

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions as a route to well‐defined mono and bis end‐functionalized poly(N‐isopropylacrylamide)

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used as a facile and quantitative method for modifying end‐groups on an N‐isopropylacrylamide (NIPAm) homopolymer. A well‐defined precursor of polyNIPAm (PNIPAm) was prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization in DMF at 70 °C using the 1‐cyano‐1‐methylethyl dithiobenzoate/2,2′‐azobis(2‐methylpropionitrile) chain transfer agent/initiator combination yielding a homopolymer with an absolute molecular weight of 5880 and polydispersity index of 1.18. The dithiobenzoate end‐groups were modified in a one‐pot process via primary amine cleavage followed by phosphine‐mediated nucleophilic thiol‐ene click reactions with either allyl methacrylate or propargyl acrylate yielding ene and yne terminal PNIPAm homopolymers quantitatively. The ene and yne groups were then modified, quantitatively as determined by ¹H NMR spectroscopy, via radical thiol‐ene and radical thiol‐yne reactions with three representative commercially available thiols yielding the mono and bis end functional NIPAm homopolymers. This is the first time such sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used in polymer synthesis/end‐group modification. The lower critical solution temperatures (LCST) were then determined for all PNIPAm homopolymers using a combination of optical measurements and dynamic light scattering. It is shown that the LCST varies depending on the chemical nature of the end‐groups with measured values lying in the range 26–35 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3544–3557, 2009     

Thiol‐Ene Cationic and Radical Reactions: Cyclization,Step‐Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol‐ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step‐growth polymerization between a dithiol and divinyl ether. p‐Toluenesulfonic acid (PTSA) induced a cationic thiol‐ene reaction to generate a thioacetal in high yield, whereas 2,2′‐azobisisobutyronitrile resulted in a radical thiol‐ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high‐dilution conditions, the cationic and radical reactions resulted in 16‐ and 18‐membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step‐growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Convenient Synthesis of Functionalized Bis‐ureidopyrimidinones Based on Thiol‐yne Reaction

The preparation of functionalized bis‐ureidopyrimidinones ( Bis‐UPy ) through the thiol‐yne reaction is described. Various Bis‐UPys with different functional groups were synthesized by using the readily available functionalized alkynes and UPy‐thiol to affirm the simplicity and versatility of the methodology.     

Thiol–Ene “Click” Reaction Triggered by Neutral Ionic Liquid: The “Ambiphilic” Character of [hmim]Br in the Regioselective Nucleophilic Hydrothiolation

Thiol–ene “click” chemistry has emerged as a powerful strategy to construct carbon–heteroatom (C? S) bonds, which generally results in the formation of two regioisomers. To this end, the neutral ionic liquid [hmim]Br has been explored as a solvent cum catalyst for the synthesis of linear thioethers from activated and inactivated styrene derivatives or secondary benzyl alcohols and thiols without the requirement of using a metal complex, base, or free radical initiator. Furthermore, detailed mechanistic investigations using ¹H NMR spectroscopy and quadrupole time‐of‐flight electrospray ionization mass spectrometry (Q‐TOF ESI‐MS) revealed that the “ambiphilic” character of the ionic liquid promotes the nucleophilic addition of thiol to styrene through an anti‐Markovnikov pathway. The catalyst recyclability and the extension of the methodology for thiol–yne click chemistry are additional benefits. A competitive study among thiophenol, styrene, and phenyl acetylene revealed that the rate of reaction is in the order of thiol–yne>thiol–ene>dimerization of thiol in [hmim]Br.     

Thiol–Anhydride Dynamic Reversible Networks

The reaction of thiols and anhydrides to form ring opened thioester/acids is shown to be highly reversible and it is accordingly employed in the fabrication of covalent adaptable networks (CANs) that possess tunable dynamic covalent chemistry. Maleic, succinic, and phthalic anhydride derivatives were used as bifunctional reactants in systems with varied stoichiometries, catalyst, and loadings. Dynamic characteristics such as temperature‐dependent stress relaxation, direct reprocessing and recycling abilities of a range of thiol–anhydride elastomers, glasses, composites and photopolymers are discussed. Depending on the catalyst strength, 100 % of externally imposed stresses were relaxed in the order of minutes to 2 hours at mild temperatures (80–120 °C). Pristine properties of the original materials were recovered following up to five cycles of a hot‐press reprocessing technique (1 h/100 °C).     

Synthesis and postfunctionalization of well‐defined star polymers via “double” click chemistry

In this article, the synthesis and the functionalization of well‐defined, narrow polydispersity (polydispersity index < 1.2) star polymers via reversible addition‐fragmentation chain transfer polymerization is detailed. In this arm first approach, the initial synthesis of a poly(pentafluorophenyl acrylate) polymer, and subsequent, cross‐linking using bis‐acrylamide to prepare star polymers, has been achieved by reversible addition fragmentation chain transfer polymerization. These star polymers were functionalized using a variety of amino functional groups via nucleophilic substitution of pentafluorophenyl activated ester to yield star polymers with predesigned chemical functionality. This approach has allowed the synthesis of star glycopolymer using a very simple approach. Finally, the core of the stars was modified via thiol‐ene click chemistry reaction using fluorescein‐o‐acrylate and DyLigh 633 Maleimide. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile and Efficient Fabrication of Photoresponsive Microgels via Thiol–Michael Addition

A photoresponsive microgel is designed by the combination of a noncovalent assembly strategy with a covalent cross‐linking method. End‐functionalized poly(ethylene glycol) with azobenzene [(PEG‐(Azo)₂)] was mixed with acrylate‐modified β‐CD (β‐CD‐MAA) to form photoresponsive inclusion complex through host–guest interaction. The above photoresponsive complex was cross‐linked by thiol‐functionalized PEG (PEG‐dithiol) via Michael addition click reaction. The photoreversibility of resulted microgel was studied by TEM, UV–Vis spectroscopy, and ¹H NMR measurements. The characterization results indicated that the reversible size changes of the microgel could be achieved by alternative UV–Vis irradiations with good repeatability.     

5‐exo versus 6‐endo Thiyl‐Radical Cyclizations in Organic Synthesis

Since the discovery of the radical mediated thiol‐ene and thiol‐yne reactions, these reactions have been employed in an intramolecular manner for the synthesis of sulfur‐containing heterocycles. Although closely related on a mechanistic basis, the thiol‐ene and thiol‐yne cyclization can differ greatly in regioselectivity and product distribution, with the thiol‐ene process being more predictable and thus attracting greater utilization. Herein, we review intramolecular thiyl‐radical addition reactions and the factors leading to the observed regioselectivity in examples in which both the 5‐exo and 6‐endo mode of cyclization are feasible. We highlight the applications of these important reactions for organic synthesis in the recent literature.     

Building and Breaking Bonds via a Compact S‐Propargyl‐Cysteine to Chemically Control Enzymes and Modify Proteins

Analogous to reversible post‐translational protein modifications, the ability to attach and subsequently remove modifications on proteins would be valuable for protein and biological research. Although bioorthogonal functionalities have been developed to conjugate or cleave protein modifications, they are introduced into proteins on separate residues and often with bulky side chains, limiting their use to one type of control and primarily protein surface. Here we achieved dual control on one residue by genetically encoding S‐propargyl‐cysteine (SprC), which has bioorthogonal alkyne and propargyl groups in a compact structure, permitting usage in protein interior in addition to surface. We demonstrated its incorporation at the dimer interface of glutathione transferase for in vivo crosslinking via thiol–yne click chemistry, and at the active site of human rhinovirus 3C protease for masking and then turning on enzyme activity via Pd‐cleavage of SprC into Cys. In addition, we installed biotin onto EGFP via Sonogashira coupling of SprC and then tracelessly removed it via Pd cleavage. SprC is small in size, commercially available, nontoxic, and allows for bond building and breaking on a single residue. Genetically encoded SprC will be valuable for chemically controlling proteins with an essential Cys and for reversible protein modifications.     

Exploring Network Formation of Tough and Biocompatible Thiol‐yne Based Photopolymers

This work deals with the in‐depth investigation of thiol‐yne based network formation and its effect on thermomechanical properties and impact strength. The results show that the bifunctional alkyne monomer di(but‐1‐yne‐4‐yl)carbonate ( DBC ) provides significantly lower cytotoxicity than the comparable acrylate, 1,4‐butanediol diacrylate ( BDA ). Real‐time near infrared photorheology measurements reveal that gel formation is shifted to higher conversions for DBC /thiol resins leading to lower shrinkage stress and higher overall monomer conversion than BDA . Glass transition temperature (T_g), shrinkage stress, as well as network density determined by double quantum solid state NMR, increase proportionally with the thiol functionality. Most importantly, highly cross‐linked DBC /dipentaerythritol hexa(3‐mercaptopropionate) networks (T_g ≈ 61 °C) provide a 5.3 times higher impact strength than BDA , which is explained by the unique network homogeneity of thiol‐yne photopolymers.

     

A novel polymerization approach via thiol‐yne addition

The ability of thiyl radicals to add to terminal unsaturations in an efficient way made them considered being one of the click reactions. Recently, thiol‐yne addition reactions have been used extensively for the synthesis of crosslinked networks and dendrimers and postpolymerization functionalization protocols. Herein, we report a novel step‐growth type reaction for highly functional linear polymers using a monoalkyne and dithiol compound. First, we investigated the model reaction between 1‐octyne and 1‐octanethiol as well as 1,4‐butanedithiol compounds, which were initiated via self‐, thermal‐, and UV‐initiation; the UV‐initiation was found to be the most efficient method and completed within 2‐h reaction time. The same conditions were applied for the polymerization of four different functional alkynes bearing different functional groups with two dithiol compounds. All polymerizations resulted in highly functional linear polymers with number averaged molecular weights ranging from 5 to 30 kDa, except for propargylic acid and its methyl ester, where only oligomers formed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

One‐pot synthesis of soluble and fluorescent aliphatic hyperbranched poly(amide‐imide) with solvent‐dependent emission

Aliphatic hyperbranched poly(amide‐imide) was facilely prepared by employing a functional thiolactone‐maleimide monomer. Highly efficient, selective and quantitative properties of amine‐maleimide Michael addition and aminolysis of a thiolactone guaranteed the generation of an ABB' thiol‐yne intermediate without side products, followed by consecutive thiol‐yne click reaction in one‐pot. The hyperbranched structure of the poly(amide‐imide) was confirmed by NMR spectroscopy and triple‐detector GPC/SEC analysis. Additionally, due to the presence of aminosuccinimide fluorophores and intrinsic physical property of hyperbranched polymers, this aliphatic hyperbranched poly(amide‐imide) possessed solvent‐dependent emission and presented good solubility in various organic solvents. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2053–2060     

Azidopropylvinylsulfonamide as a New Bifunctional Click Reagent for Bioorthogonal Conjugations: Application for DNA–Protein Cross‐Linking

N‐(3‐Azidopropyl)vinylsulfonamide was developed as a new bifunctional bioconjugation reagent suitable for the cross‐linking of biomolecules through copper(I)‐catalyzed azide–alkyne cycloaddition and thiol Michael addition reactions under biorthogonal conditions. The reagent is easily clicked to an acetylene‐containing DNA or protein and then reacts with cysteine‐containing peptides or proteins to form covalent cross‐links. Several examples of bioconjugations of ethynyl‐ or octadiynyl‐modified DNA with peptides, p53 protein, or alkyne‐modified human carbonic anhydrase with peptides are given.     

Exploring thiol‐yne based monomers as low cytotoxic building blocks for radical photopolymerization

The last decade has seen a remarkable interest in the development of biocompatible monomers for the realization of patient specific medical devices by means of UV‐based additive manufacturing technologies. This contribution deals with the synthesis and investigation of novel thiol‐yne based monomers with a focus on their biocompatibility and also the mechanical properties in their cured state. It could be successfully shown that propargyl and but‐1‐yne‐4‐yl ether derivatives have a significant lower cytotoxicity than the corresponding (meth)acrylates with similar backbones. Together with appropriate thiol monomers, these compounds show reactivities in the range of (meth)acrylates and almost quantitative triple bond conversions. A particular highlight is the investigation of the network properties of photo cured alkynyl ether/thiol resins by means of low field solid state nuclear magnetic resonance spectroscopy. Additionally, dynamic mechanical analysis of those polymers revealed that monomers containing rigid backbones lead to moduli and glass transition temperatures (T_g's), sufficiently high for the fabrication of medical devices by UV based additive manufacturing methods. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3484–3494     

Reactive Polymer Coatings: A General Route to Thiol‐ene and Thiol‐yne Click Reactions

Reactive polymer coatings were synthesized via chemical vapor deposition (CVD) polymerization process. These coatings decouple surface design from bulk properties of underlying materials and provide a facile and general route to support thiol‐ene and thiol‐yne reactions on a variety of substrate materials. Through the reported technique, surface functions can be activated through a simple design of thiol‐terminated molecules such as polyethylene glycols (PEGs) or peptides (GRGDYC), and the according biological functions were demonstrated in controlled and low‐fouling protein adsorptions as well as accurately manipulated cell attachments.     

The power of thiol‐ene chemistry

As a tribute to Professor Charlie Hoyle, we take the opportunity to review the impact of thiol‐ene chemistry on polymer and materials science over the past 5 years. During this time, a renaissance in thiol‐ene chemistry has occurred with recent progress demonstrating its unique advantages when compared with traditional coupling and functionalization strategies. Additionally, the robust nature of thiol‐ene chemistry allows for the preparation of well‐defined materials with few structural limitations and synthetic requirements. To illustrate these features, the utility of thiol‐ene reactions for network formation, polymer functionalization, dendrimer synthesis, and the decoration of three‐dimensional objects is discussed. Also, the development of the closely related thiol‐yne chemistry is described. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 743–750, 2010     

Cross‐Linking Density and Temperature Effects on the Self‐Assembly of SiO2—PNIPAAm Core–Shell Particles at Interfaces

SiO₂–PNIPAAm core–shell microgels (PNIPAAm=poly(N‐isopropylacrylamide)) with various internal cross‐linking densities and different degrees of polymerization were prepared in order to investigate the effects of stability, packing, and temperature responsiveness at polar–apolar interfaces. The effects were investigated using interfacial tensiometry, and the particles were visualized by cryo‐scanning electron microscopy (SEM) and scanning force microscopy (SFM). The core–shell particles display different interfacial behaviors depending on the polymer shell thickness and degree of internal cross‐linking. A thicker polymer shell and reduced internal cross‐linking density are more favorable for the stabilization and packing of the particles at oil–water (o/w) interfaces. This was shown qualitatively by SFM of deposited, stabilized emulsion droplets and quantitatively by SFM of particles adsorbed onto a hydrophobic planar silicon dioxide surface, which acted as a model interface system. The temperature responsiveness, which also influences particle–interface interactions, was investigated by dynamic temperature protocols with varied heating rates. These measurements not only showed that the particles had an unusual but very regular and reversible interface stabilization behavior, but also made it possible to assess the nonlinear response of PNIPAAm microgels to external thermal stimuli.     

Instant Locking of Molecular Ordering in Liquid Crystal Elastomers by Oxygen‐Mediated Thiol–Acrylate Click Reactions

Liquid crystal elastomers (LCEs) with intrinsic anisotropic strains are reversible shape‐memory polymers of interest in sensor, actuator, and soft robotics applications. Rapid gelation of LCEs is required to fix molecular ordering within the elastomer network, which is essential for directed shape transformation. A highly efficient photo‐cross‐linking chemistry, based on two‐step oxygen‐mediated thiol–acrylate click reactions, allows for nearly instant gelation of the main‐chain LCE network upon exposure to UV light. Molecular orientation from the pre‐aligned liquid crystal oligomers can be faithfully transferred to the LCE films, allowing for preprogrammed shape morphing from two to three dimensions by origami‐ (folding‐only) and kirigami‐like (folding with cutting) mechanisms. The new LCE chemistry also enables widely tunable physical properties, including nematic‐to‐ isotropic phase‐transition temperatures (T_N‐I), glassy transition temperatures (T_g), and mechanical strains, without disrupting the LC ordering.     

Stimuli‐Responsive Particle‐Based Amphiphiles as Active Colloids Prepared by Anisotropic Click Chemistry

Amphiphiles alter the energy of surfaces, but the extent of this feature is typically constant. Smart systems with amphiphilicity as a function of an external, physical trigger are desirable. As a trigger, the exposure to a magnetic field, in particular, is attractive because it is not shielded in water. Amphiphiles like surfactants are well known, but the magnetic response of molecules is typically weak. Vice‐versa, magnetic particles with strong response to magnetic triggers are fully established in nanoscience, but they are not amphiphilic. In this work colloids with Janus architecture and ultra‐small dimensions (25 nm) have been prepared by spatial control over the thiol‐yne click modification of organosilica‐magnetite core–shell nanoparticles. The amphiphilic properties of these anisotropically modified particles are proven. Finally, a pronounced and reversible change in interfacial stabilization results from the application of a weak (<1 T) magnetic field.