Hard-Sphere Random Close-Packed Au47Cd2(TBBT)31 Nanoclusters with a Faradaic Efficiency of Up to 96 % for Electrocatalytic CO2 Reduction to CO

Metal nanoclusters have recently attracted considerable attention, not only because of their special size range but also because of their well-defined compositions and structures. However, subtly tailoring the compositions and structures of metal nanoclusters for potential applications remains challenging. Now, a two-phase anti-galvanic reduction (AGR) method is presented for precisely tailoring Au₄₄(TBBT)₂₈ to produce Au₄₇Cd₂(TBBT)₃₁ nanoclusters with a hard-sphere random close-packed structure, exhibiting Faradaic efficiencies of up to 96 % at −0.57 V for the electrocatalytic reduction of CO₂ to CO.     

An Unprecedented Kernel Growth Mode and Layer‐Number‐Odevity‐Dependent Properties in Gold Nanoclusters

Kernel atoms of Au nanoclusters are packed layer‐by‐layer along the [001] direction with every full (001) monolayer composed of 8 Au atoms (Au₈ unit) in nanoclusters with formula of Au_8n+4(TBBT)_4n+8 (n is the number of Au₈ units; TBBTH=4‐tert‐butylbenzenelthiol). It is unclear whether the kernel atoms can be stacked in a defective‐layer way along the [001] direction during growth of the series of nanoclusters and how the kernel layer number affects properties. Now, a nanocluster is synthesized that is precisely characterized by mass spectrometry and single‐crystal X‐ray crystallography, revealing a layer stacking mode in which a half monolayer composed of 4 atoms (Au₄ unit) is stacked on the full monolayer along the [001] direction. The size and the odevity of the kernel layer number influence the properties (polarity, photoluminescence) of gold nanoclusters. The obtained nanocluster extends the previous formula from Au_8n+4(TBBT)_4n+8 to Au_4n+4(TBBT)_2n+8 (n is the number of Au₄ units).     

Fcc versus Non‐fcc Structural Isomerism of Gold Nanoparticles with Kernel Atom Packing Dependent Photoluminescence

Structural isomerism allows the correlation between structures and properties to be investigated. Unfortunately, the structural isomers of metal nanoparticles are rare and genuine structural isomerism with distinctly different kernel atom packing (e.g., face‐centered cubic (fcc) vs. non‐fcc) has not been reported until now. Herein we introduce a novel ion‐induction method to synthesize a unique gold nanocluster with a twist mirror symmetry structure. The as‐synthesized nanocluster has the same composition but different kernel atom packing to an existing gold nanocluster Au₄₂(TBBT)₂₆ (TBBT=4‐tert‐butylbenzenethiolate). The fcc‐structured Au₄₂(TBBT)₂₆ nanocluster shows more enhanced photoluminescence than the non‐fcc‐structured Au₄₂(TBBT)₂₆ nanocluster, indicating that the fcc‐structure is more beneficial for emission than the non‐fcc structure. This idea was supported by comparison of the emission intensity of another three pairs of gold nanoclusters with similar compositions and sizes but with different kernel atom packings (fcc vs. non‐fcc).     

Phosphine-Triggered Structural Defects in Au44 Homologues Boost Electrocatalytic CO2 Reduction

The systematic induction of structural defects at the atomic level is crucial to metal nanocluster research because it endows cluster-based catalysts with highly reactive centers and allows for a comprehensive investigation of viable reaction pathways. Herein, by substituting neutral phosphine ligands for surface anionic thiolate ligands, we establish that one or two Au₃ triangular units can be successfully introduced into the double-stranded helical kernel of Au₄₄(TBBT)₂₈, where TBBT=4-tert-butylbenzenethiolate, resulting in the formation of two atomically precise defective Au₄₄ nanoclusters. Along with the regular face-centered-cubic (fcc) nanocluster, the first series of mixed-ligand cluster homologues is identified, with a unified formula of Au₄₄(PPh₃)_n(TBBT)_28−2n (n=0–2). The Au₄₄(PPh₃)(TBBT)₂₆ nanocluster having major structural defects at the bottom of the fcc lattice demonstrates superior electrocatalytic performance in the CO₂ reduction to CO. Density functional theory calculations indicate that the active site near the defects significantly lowers the free energy for the *COOH formation, the rate-determining step in the whole catalytic process.     

Au10(TBBT)10: the Begining and the End of Aun(TBBT)m Nanoclusters

Gold(I) thiolate compounds (i.e. Au^I-SR) are important precursors for the synthesis of atomically precise Au_n(SR)_m nanoclusters. However, the nature of the Au^I-SR precursor remains elusive. Here, we report that the Au₁₀(TBBT)₁₀ complex is a universal precursor for the synthesis of Au_n(TBBT)_m nanoclusters (where TBBT=4-tertbutylbenzenethiol/thiolate). Interestingly, the Au₁₀(TBBT)₁₀ complex is also found to be re-generated through extended etching of the Au_n(SR)_m nanoclusters with excess of TBBT thiol and O₂. The formation of well-defined Au₁₀(TBBT)₁₀ complex, instead of polymeric Au^I-SR, is attributed to the bulkiness of the TBBT thiol. Through 1D and 2D NMR characterization, the structure of Au₁₀(TBBT)₁₀ is correlated with the previously reported X-ray structure, which contains two inter-penetrated Au₅(TBBT)₅ rings. The photophysical property of Au₁₀(TBBT)₁₀ complex is further probed by femtosecond transient absorption spectroscopy. The accessibility of the precise Au₁₀(TBBT)₁₀ precursor improves the efficiency of the synthesis of the Au_n(TBBT)_m nanoclusters and is expected to further facilitate excellent control and understanding of the reaction mechanisms of nanocluster synthesis.     

Homoleptic Alkynyl‐Protected Gold Nanoclusters: Au44(PhC≡C)28 and Au36(PhC≡C)24

For the first time total structure determination of homoleptic alkynyl‐protected gold nanoclusters is reported. The nanoclusters are synthesized by direct reduction of PhC≡CAu, to give Au₄₄(PhC≡C)₂₈ and Au₃₆(PhC≡C)₂₄. The Au₄₄ and Au₃₆ nanoclusters have fcc‐type Au₃₆ and Au₂₈ kernels, respectively, as well as surrounding PhC≡C‐Au‐C₂(Ph)Au‐C≡CPh dimeric “staples” and simple PhC≡C bridges. The structures of Au₄₄(PhC≡C)₂₈ and Au₃₆(PhC≡C)₂₄ are similar to Au₄₄(SR)₂₈ and Au₃₆(SR)₂₄, but the UV/Vis spectra are different. The protecting ligands influence the electronic structures of nanoclusters significantly. The synthesis of these two alkynyl‐protected gold nanoclusters indicates that a series of gold nanoclusters in the general formula Au_x (RC≡C)_y as counterparts to Au_x (SR)_y can be expected.     

An Unprecedented Kernel Growth Mode and Layer-Number-Odevity-Dependent Properties in Gold Nanoclusters

Kernel atoms of Au nanoclusters are packed layer-by-layer along the [001] direction with every full (001) monolayer composed of 8 Au atoms (Au₈ unit) in nanoclusters with formula of Au_8n+4(TBBT)_4n+8 (n is the number of Au₈ units; TBBTH=4-tert-butylbenzenelthiol). It is unclear whether the kernel atoms can be stacked in a defective-layer way along the [001] direction during growth of the series of nanoclusters and how the kernel layer number affects properties. Now, a nanocluster is synthesized that is precisely characterized by mass spectrometry and single-crystal X-ray crystallography, revealing a layer stacking mode in which a half monolayer composed of 4 atoms (Au₄ unit) is stacked on the full monolayer along the [001] direction. The size and the odevity of the kernel layer number influence the properties (polarity, photoluminescence) of gold nanoclusters. The obtained nanocluster extends the previous formula from Au_8n+4(TBBT)_4n+8 to Au_4n+4(TBBT)_2n+8 (n is the number of Au₄ units).     

Isomerization-induced enhancement of luminescence in Au28(SR)20 nanoclusters

Understanding the origin and structural basis of the photoluminescence (PL) phenomenon in thiolate-protected metal nanoclusters is of paramount importance for both fundamental science and practical applications. It remains a major challenge to correlate the PL properties with the atomic-level structure due to the complex interplay of the metal core (i.e. the inner kernel) and the exterior shell (i.e. surface Au(i)-thiolate staple motifs). Decoupling these two intertwined structural factors is critical in order to understand the PL origin. Herein, we utilize two Au₂₈(SR)₂₀ nanoclusters with different –R groups, which possess the same core but different shell structures and thus provide an ideal system for the PL study. We discover that the Au₂₈(CHT)₂₀ (CHT: cyclohexanethiolate) nanocluster exhibits a more than 15-fold higher PL quantum yield than the Au₂₈(TBBT)₂₀ nanocluster (TBBT: p-tert-butylbenzenethiolate). Such an enhancement is found to originate from the different structural arrangement of the staple motifs in the shell, which modifies the electron relaxation dynamics in the inner core to different extents for the two nanoclusters. The emergence of a long PL lifetime component in the more emissive Au₂₈(CHT)₂₀ nanocluster reveals that its PL is enhanced by suppressing the nonradiative pathway. The presence of long, interlocked staple motifs is further identified as a key structural parameter that favors the luminescence. Overall, this work offers structural insights into the PL origin in Au₂₈(SR)₂₀ nanoclusters and provides some guidelines for designing luminescent metal nanoclusters for sensing and optoelectronic applications.

Two Au₂₈(SR)₂₀ nanoclusters with an identical core but different shells exhibit a ∼15-fold difference in photoluminescence.     

Fluorescent Gold Nanoclusters with Interlocked Staples and a Fully Thiolate‐Bound Kernel

The structural features that render gold nanoclusters intrinsically fluorescent are currently not well understood. To address this issue, highly fluorescent gold nanoclusters have to be synthesized, and their structures must be determined. We herein report the synthesis of three fluorescent Au₂₄(SR)₂₀ nanoclusters (R=C₂H₄Ph, CH₂Ph, or CH₂C₆H₄^tBu). According to UV/Vis/NIR, differential pulse voltammetry (DPV), and X‐ray absorption fine structure (XAFS) analysis, these three nanoclusters adopt similar structures that feature a bi‐tetrahedral Au₈ kernel protected by four tetrameric Au₄(SR)₅ motifs. At least two structural features are responsible for the unusual fluorescence of the Au₂₄(SR)₂₀ nanoclusters: Two pairs of interlocked Au₄(SR)₅ staples reduce the vibration loss, and the interactions between the kernel and the thiolate motifs enhance electron transfer from the ligand to the kernel moiety through the Au?S bonds, thereby enhancing the fluorescence. This work provides some clarification of the structure–fluorescence relationship of such clusters.     

Lattice Compression Revealed at the ≈1 nm Scale

Lattice tuning at the ≈1 nm scale is fascinating and challenging; for instance, lattice compression at such a minuscule scale has not been observed. The lattice compression might also bring about some unusual properties, which waits to be verified. Through ligand induction, we herein achieve the lattice compression in a ≈1 nm gold nanocluster for the first time, as detected by the single-crystal X-ray crystallography. In a freshly synthesized Au₅₂(CHT)₂₈ (CHT=S-c−C₆H₁₁) nanocluster, the lattice distance of the (110) facet is found to be compressed from 4.51 to 3.58 Å at the near end. However, the lattice distances of the (111) and (100) facets show no change in different positions. The lattice-compressed nanocluster exhibits superior electrocatalytic activity for the CO₂ reduction reaction (CO₂RR) compared to that exhibited by the same-sized Au₅₂(TBBT)₃₂ (TBBT=4-tert-butyl-benzenethiolate) nanocluster and larger Au nanocrystals without lattice variation, indicating that lattice tuning is an efficient method for tailoring the properties of metal nanoclusters. Further theoretical calculations explain the high CO₂RR performance of the lattice-compressed Au₅₂(CHT)₂₈ and provide a correlation between its structure and catalytic activity.     

One‐Pot Synthesis of Phenylmethanethiolate‐Protected Au20(SR)16 and Au24(SR)20 Nanoclusters and Insight into the Kinetic Control

We report two synthetic routes for concurrent formation of phenylmethanethiolate (‐SCH₂Ph)‐protected Au₂₀(SR)₁₆ and Au₂₄(SR)₂₄ nanoclusters in one‐pot by kinetic control. Unlike the previously reported methods for thiolate‐protected gold nanoclusters, which typically involve rapid reduction of the gold precursor by excess NaBH₄ and subsequent size focusing into atomically monodisperse clusters of a specific size, the present work reveals some insight into the kinetic control in gold–thiolate cluster synthesis. We demonstrate that the synthesis of ‐SCH₂Ph‐protected Au₂₀ and Au₂₄ nanoclusters can be obtained through two different, kinetically controlled methods. Specifically, route 1 employs slow addition of a relatively large amount of NaBH₄ under slow stirring of the reaction mixture, while route 2 employs rapid addition of a small amount of NaBH₄ under rapid stirring of the reaction mixture. At first glance, these two methods apparently possess quite different reaction kinetics, but interestingly they give rise to exactly the same product (i.e., the coproduction of Au₂₀(SCH₂Ph)₁₆ and Au₂₄(SCH₂Ph)₂₀ clusters). Our results explicitly demonstrate the complex interplay between the kinetic factors that include the addition speed and amount of NaBH₄ solution as well as the stirring speed of the reaction mixture. Such insight is important for devising synthetic routes for different sized nanoclusters. We also compared the photoluminescence and electrochemical properties of PhCH₂S‐protected Au₂₀ and Au₂₄ nanoclusters with the PhC₂H₄S‐protected counterparts. A surprising 2.5 times photoluminescence enhancement was observed for the PhCH₂S‐capped nanoclusters when compared to the PhC₂H₄S‐capped analogues, thereby indicating a drastic effect of the ligand that is merely one carbon shorter.     

An Atomic‐Level Strategy for Unraveling Gold Nanocatalysis from the Perspective of Aun(SR)m Nanoclusters

An atomic‐level strategy is devised to gain insight into the origin of nanogold catalysis by using atomically monodisperse Au_n(SR)_m nanoclusters as well‐defined catalysts for styrene oxidation. The Au_n(SR)_m nanoclusters are emerging as a new class of gold nanocatalyst to overcome the polydispersity of conventional nanoparticle catalysts. The unique atom‐packing structure and electronic properties of Au_n(SR)_m nanoclusters (<2 nm) are rationalized to be responsible for their extraordinary catalytic activity observed in styrene oxidation. An interesting finding is that quantum size effects of Au_n(SR)_m nanoclusters, rather than the higher specific surface area, play a major role in gold‐catalyzed selective oxidation of styrene. For example, Au₂₅(SR)₁₈ nanoclusters (≈1 nm) are found to be particularly efficient in activating O₂, which is a key step in styrene oxidation, and hence, the ultrasmall Au₂₅ catalyst exhibits higher activity than do larger sizes. This atomic‐level strategy has allowed us to obtain an important insight into some fundamental aspects of nanogold catalysis in styrene oxidation. The ultrasmall yet robust Au_n(SR)_m nanoclusters are particularly promising for studying the mechanistic aspects of nanogold catalysis and for future design of better catalysts with high activity and selectivity for certain chemical processes.     

Quasi‐Dual‐Packed‐Kerneled Au49(2,4‐DMBT)27 Nanoclusters and the Influence of Kernel Packing on the Electrochemical Gap

Although face‐centered cubic (fcc), body‐centered cubic (bcc), hexagonal close‐packed (hcp), and other structured gold nanoclusters have been reported, it was unclear whether gold nanoclusters with mix‐packed (fcc and non‐fcc) kernels exist, and the correlation between kernel packing and the properties of gold nanoclusters is unknown. A Au₄₉(2,4‐DMBT)₂₇ nanocluster with a shell electron count of 22 has now been been synthesized and structurally resolved by single‐crystal X‐ray crystallography, which revealed that Au₄₉(2,4‐DMBT)₂₇ contains a unique Au₃₄ kernel consisting of one quasi‐fcc‐structured Au₂₁ and one non‐fcc‐structured Au₁₃ unit (where 2,4‐DMBTH=2,4‐dimethylbenzenethiol). Further experiments revealed that the kernel packing greatly influences the electrochemical gap (EG) and the fcc structure has a larger EG than the investigated non‐fcc structure.     

Highly Robust but Surface‐Active: An N‐Heterocyclic Carbene‐Stabilized Au25 Nanocluster

Surface organic ligands play a critical role in stabilizing atomically precise metal nanoclusters in solutions. However, it is still challenging to prepare highly robust ligated metal nanoclusters that are surface‐active for liquid‐phase catalysis without any pre‐treatment. Now, an N‐heterocyclic carbene‐stabilized Au₂₅ nanocluster with high thermal and air stabilities is presented as a homogenous catalyst for cycloisomerization of alkynyl amines to indoles. The nanocluster, characterized as [Au₂₅(ⁱPr₂‐bimy)₁₀Br₇]²⁺ (ⁱPr₂‐bimy=1,3‐diisopropylbenzimidazolin‐2‐ylidene) ( 1 ), was synthesized by direct reduction of AuSMe₂Cl and ⁱPr₂‐bimyAuBr with NaBH₄ in one pot. X‐ray crystallization analysis revealed that the cluster comprises two centered Au₁₃ icosahedra sharing a vertex. Cluster 1 is highly stable and can survive in solution at 80 °C for 12 h, which is superior to Au₂₅ nanoclusters passivated with phosphines or thiols. DFT computations reveal the origins of both electronic and thermal stability of 1 and point to the probable catalytic sites. This work provides new insights into the bonding capability of N‐heterocyclic carbene to Au in a cluster, and offers an opportunity to probe the catalytic mechanism at the atomic level.     

Ag2Au50(PET)36 Nanocluster: Dimeric Assembly of Au25(PET)18 Enabled by Silver Atoms

The assembly of atomically precise metal nanoclusters offers exciting opportunities to gain fundamental insights into the hierarchical assembly of nanoparticles. However, it is still challenging to control the assembly of individual nanoclusters at a molecular or atomic level. Herein, we report the dimeric assembly of Au₂₅(PET)₁₈ (PET=2‐phenylethanethiol), where two Au₂₅(PET)₁₈ monomers are bridged together by two Ag atoms to form the Ag₂Au₅₀(PET)₃₆ dimer. The Ag₂Au₅₀(PET)₃₆ dimer is a unique mesomer, which has not been found in any other chiral metal nanoclusters. Furthermore, the Ag₂Au₅₀(PET)₃₆ dimer is distinct from the Au₂₅(PET)₁₈ monomer in its optical, electronic, and catalytic properties. This study is expected to provide a feasible strategy to precisely modulate the assembly of metal nanoclusters with controllable structures and properties.     

Carbon Monoxide: A Mild and Efficient Reducing Agent towards Atomically Precise Gold Nanoclusters

In recent years, thiolate‐protected gold nanoclusters (or thiolated Au NCs) with a core size below 2 nm have emerged as a new class of multifunctional nanoparticles because of their unique molecular‐like properties and the potential to use these properties in many practical applications. A general synthesis of Au NCs may involve the use of a strong reducing agent (e.g., sodium borohydride (NaBH₄)), which often leads to the formation of mix‐sized Au NCs if no delicate control is applied. To obtain atomically precise Au NCs, additional physical or chemical selection processes (e.g., high‐resolution separation or size‐focusing) are required, which are difficult to be scaled up or are limited to only thermodynamically stable products. By introducing a milder reducing agent – carbon monoxide (CO) – both stable and metastable thiolated Au NCs, including Au_10–12, Au₁₅, Au₁₈, Au₂₅, and Au₂₉, can be synthesized in a one‐pot manner. In addition, CO reduction also enables the synthesis of a highly luminescent Au₂₂(SG)₁₈ NC. Furthermore, the intermediates of Au NC growth can be tracked in the CO‐reduction system due to the mild and readily stoppable nature of CO reduction. Therefore, the use of CO reduction may bring new flexibilities in designing synthetic strategies and understanding the growth mechanism of atomically precise Au NCs, which could contribute to a better design of functional Au NCs, further paving their way towards practical applications in various fields.     

Co‐Adsorption of O2 and CO on Au2−: Infrared Photodissociation Spectroscopy and Theoretical Study of [Au2O2(CO)n]− (n=2–6)

The co‐adsorption of O₂ and CO on anionic sites of gold species is considered as a crucial step in the catalytic CO oxidation on gold catalysts. In this regard, the [Au₂O₂(CO)_n]^? (n=2–6) complexes were prepared by using a laser vaporization supersonic ion source and were studied by using infrared photodissociation spectroscopy in the gas phase. All the [Au₂O₂(CO)_n]^? (n=2–6) complexes were characterized to have a core structure involving one CO and one O₂ molecule co‐adsorbed on Au₂^? with the other CO molecules physically tagged around. The CO stretching frequency of the [Au₂O₂(CO)]^? core ion is observed around =2032–2042 cm^?1, which is about 200 cm^?1 higher than that in [Au₂(CO)₂]^?. This frequency difference and the analyses based on density functional calculations provide direct evidence for the synergy effect of the chemically adsorbed O₂ and CO. The low lying structures with carbonate group were not observed experimentally because of high formation barriers. The structures and the stability (i.e., the inertness in a sense) of the co‐adsorbed O₂ and CO on Au₂^? may have relevance to the elementary reaction steps on real gold catalysts.     

The Magic Au60 Nanocluster: A New Cluster‐Assembled Material with Five Au13 Building Blocks

Herein, we report the synthesis and atomic structure of the cluster‐assembled [Au₆₀Se₂(Ph₃P)₁₀(SeR)₁₅]⁺ material. Five icosahedral Au₁₃ building blocks from a closed gold ring with Au–Se–Au linkages. Interestingly, two Se atoms (without the phenyl tail) locate in the center of the cluster, stabilized by the Se‐(Au)₅ interactions. The ring‐like nanocluster is unprecedented in previous experimental and theoretical studies of gold nanocluster structures. In addition, our optical and electrochemical studies show that the electronic properties of the icosahedral Au₁₃ units still remain unchanged in the penta‐twinned Au₆₀ nanocluster, and this new material might be a promising in optical limiting material. This work offers a basis for deep understanding on controlling the cluster‐assembled materials for tailoring their functionalities.     

Template‐Free Supracolloidal Self‐Assembly of Atomically Precise Gold Nanoclusters: From 2D Colloidal Crystals to Spherical Capsids

We report supracolloidal self‐assembly of atomically precise and strictly monodisperse gold nanoclusters involving p‐mercaptobenzoic acid ligands (Au₁₀₂‐pMBA₄₄) under aqueous conditions into hexagonally packed monolayer‐thick two‐dimensional facetted colloidal crystals (thickness 2.7 nm) and their bending to closed shells leading to spherical capsids (d ca. 200 nm), as controlled by solvent conditions. The 2D colloidal assembly is driven in template‐free manner by the spontaneous patchiness of the pMBA ligands around the Au₁₀₂‐pMBA₄₄ nanoclusters preferably towards equatorial plane, thus promoting inter‐nanocluster hydrogen bonds and high packing to planar sheets. More generally, the findings encourage to explore atomically precise nanoclusters towards highly controlled colloidal self‐assemblies.     

The Origin of the Photoluminescence Enhancement of Gold‐Doped Silver Nanoclusters: The Importance of Relativistic Effects and Heteronuclear Gold–Silver Bonds

The weak photoluminescence of silver nanoclusters prevents their broad application as luminescent nanomaterials. Recent experiments, however, have shown that gold doping can significantly enhance the photoluminescence intensity of Ag₂₉ nanoclusters but the molecular and physical origins of this effect remain unknown. Therefore, we have computationally explored the geometric and electronic structures of Ag₂₉ and gold‐doped Ag_29?xAu_x (x=1–5) nanoclusters in the S₀ and S₁ states. We found that 1) relativistic effects that are mainly due to the Au atoms play an important role in enhancing the fluorescence intensity, especially for highly doped Ag₂₆Au₃, Ag₂₅Au₄, and Ag₂₄Au₅, and that 2) heteronuclear Au?Ag bonds can increase the stability and regulate the fluorescence intensity of isomers of these gold‐doped nanoclusters. These novel findings could help design doped silver nanoclusters with excellent luminescence properties.