Thermoreversible cis-cisoidal to cis-transoidal isomerization of helical dendronized polyphenylacetylenes

High cis content (81-99%) cis-transoidal polyphenylacetylene (PPA) jacketed with amphiphilic self-assembling dendrons, poly[(3,4-3,5)mG2-4EBn] with m = 8, 10, 12, 14, 16, and (S)-3,7-dimethyloctyl, were synthesized by Rh(C triple bond CPh)(nbd)(PPh(3))(2) (nbd = 2,5-norbornadiene)/N,N-(dimethylamino)pyridine (DMAP) catalyzed polymerization of macromonomers. The resulting cylindrical PPAs self-organize into hexagonal columnar lattices with intracolumnar order (Phi(h)(io)) and without (Phi(h)). The polymers with m = 12, 14, and 16 exhibit also a hexagonal columnar crystal phase (Phi(h,k)). The reversible Phi(h,k)-to-Phi(h)(io)-to- Phi(h) phase transition in these dendronized PPAs was analyzed by a combination of differential scanning calorimetry and small and wide-angle X-ray diffraction experiments performed on powder and oriented fibers. In the Phi(h,k) and Phi(h)(io) phases, the dendronized PPAs form helical porous columns. The helical pore disappears in the Phi(h) phase. This change is accompanied by a decrease of the external column diameter that is induced by stretching of the polymer backbone along the axis of the cylinder. The helix sense of the porous PPA is selected by homochiral alkyl dendritic tails. This transition is generated by an unprecedented conversion of the PPA backbone from the cis-cisoidal conformation in the Phi(h,k) and Phi(h)(io) phases to the cis-transoidal conformation in the Phi(h) phase. Under the same conditions, the pristine cis-PPA undergoes cis-trans isomerization and irreversible intramolecular 6pi electrocyclization of 1,3-cis,5-hexatriene sequences followed by chain cleavage. These processes are eliminated in the dendronized cis-PPA below its decomposition temperature.     

Synthesis, structural analysis, and visualization of a library of dendronized polyphenylacetylenes

A library of eleven high cis-content cis-transoidal polyphenylacetylenes (PPAs) dendronized with self-assembling dendrons was prepared from a library of fifteen convergently synthesized macromonomers. Using [Rh(C triple bond CPh)(nbd)(PPh(3))(2)] (nbd=2,5-norbornadiene) in the presence of 10 equiv of N,N-dimethylaminopyridine, predictive control over molecular weight and narrow molecular weight distribution are obtained. The PPA backbone serves as a helical scaffold for the self-assembling dendrons. The dendron primary structure dictates the diameter of the cylindrical PPAs in bulk, both in the self-organized hexagonal columnar (Phi(h)) lattice determined by X-ray diffraction (XRD) and in monolayers on highly ordered pyrolytic graphite (HOPG) and mica visualized by atomic force microscopy (AFM). Thermal and bulk phase characteristics of the cylindrical PPAs reinforces the generality that flexible polymer backbones adopt a helical conformation within the cylindrical macromolecules generated by polymers jacketed with self-assembling dendrons.     

Steric communication of chiral information observed in dendronized polyacetylenes

Structural and retrostructural analysis of helical dendronized polyacetylenes (i.e., self-organizable polyacetylenes containing first generation dendrons or minidendrons as side groups) synthesized by the polymerization of minidendritic acetylenes with [Rh(nbd)Cl]2 (nbd = 2,5-norbornadiene) reveals an approximately 10% change in the average column stratum thickness (l) of the cylindrical macromolecules with a chiral periphery, through which a strong preference for a single-handed screw-sense is communicated. The cylindrical macromolecules reversibly interconvert between a three-dimensional (3D) centered rectangular lattice (Phi r-c,k) exhibiting long-range intracolumnar helical order at lower temperatures and a two-dimensional (2D) hexagonal columnar lattice (Phi h) with short-range helical order at higher temperatures. A polymer containing chiral, nonracemic peripheral alkyl tails is found to have a larger l as compared to the achiral polymers. In methyl cyclohexane solution, the same polymer exhibits an intense signal in circular dichroism (CD) spectra, whose intensity decreases upon heating. The observed change in l indicates that the chiral tails alter the polymer conformation from that of the corresponding polymer with achiral side chains. This change in conformation results in a relatively large free energy difference (DeltaGh) favoring one helix-sense over the other (per monomer residue). The capacity to distort the polymer conformation and corresponding free energy is related to the population of branches in the chiral tails and their distance from the polymer backbone by comparison to recently reported first and second generation dendronized polyphenylacetylenes.     

Helix formation in linear achiral dendronized polymers: a computer simulation study

We present a molecular simulation study of the structure of linear dendronized polymers. We use excluded volume interactions in the context of a generic coarse grained molecular model whose geometrical parameters are tuned to represent a poly(paraphenylene) backbone with benzyl ether, Frechet-type dendrons. We apply Monte Carlo sampling in order to investigate the formation of packing-induced chiral structures along the polymer backbone of these chemically achiral systems. We find that helical structures can be formed, usually with defects consisting of domains with reversed helical handedness. Clear signs of helical arrangements of the dendrons begin to appear for dendritic generation g=4, while for g=5 these arrangements dominate and perfect helices can be observed as equilibrium structures obtained from certain types of starting configurations.     

Light-controlled supramolecular helicity of a liquid crystalline phase using a helical polymer functionalized with a single chiroptical molecular switch

Control over the preferred helical sense of a poly(n-hexyl isocyanate) (PHIC) by using a single light-driven molecular motor, covalently attached at the polymer's terminus, has been accomplished in solution via a combination of photochemical and thermal isomerizations. Here, we report that after redesigning the photochromic unit to a chiroptical molecular switch, of which the two states are thermally stable but photochemically bistable, the chiral induction to the polymer's backbone is significantly improved and the handedness of the helical polymer is addressable by irradiation with two different wavelengths of light. Moreover, we show that the chiral information is transmitted, via the macromolecular level of the polyisocyanate, to the supramolecular level of a lyotropic cholesteric liquid crystalline phase consisting of these stiff, rodlike polymers. This allows the magnitude and sign of the supramolecular helical pitch of the liquid crystal film to be fully controlled by light.     

Synthesis,structural, and retrostructural analysis of helical dendronized poly(1‐naphthylacetylene)s

Structural and retrostructural analysis of chiral, nonracemic ( poly [(3,4,5)dm8G1‐1EN] ), and achiral ( poly[(3,4,5)12G1‐1EN] ) poly(1‐naphthylacetylene)s demonstrates new design principles for helical dendronized polyarylacetylenes. The oblate cylindrical dendronized polymers self‐organize in a c2mm centered rectangular columnar (Φ_r‐c) lattice. An all cis‐polyene backbone microstructure with very high cisoid character is introduced to rationalize features from small‐ and wide‐angle X‐ray diffraction experiments. More compact helical conformations are ideal for efficient communication or amplification of chirality over long distances. Peripheral chiral tails select a preferred helical screw sense of the polyene backbone. In solution, the preferred helical conformation persists over a wide temperature range. In bulk, the naphthyl moiety facilitates a longer correlation length for helical order compared to an analogous minidendritic poly(phenylacetylene). These attributes suggest that the naphthyl moiety may be better suited for expressing helical chirality in monolayer domains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4974–4987, 2007     

A rigid, chiral, dendronized polymer with a thermally stable, right-handed helical conformation

First- and second-generation dendronized polymethacrylates PG1 and PG2 carrying chiral 4-aminoproline-based dendrons were obtained on the half-gram scale in high molar masses (PG1: M(n)=5 x 10(6) g mol(-1), PG2: M(n)=1x10(6) g mol(-1)) by spontaneous (radical) polymerization of the corresponding vinyl macromonomers. NMR spectroscopic studies on PG2 together with its unprecedented high glass transition temperature (T(g)>200 degrees C, decomp) and structural parameters provided by atomistic MD simulations show this polymer to be rather rigid. Optical rotation and CD measurements revealed that PG2 adopts a helical conformation that remains unchanged over wide ranges of temperature and solvent polarity. It is also retained when the polymer is deprotected (and thus positively charged, de-PG2) at its terminal amino groups, by which the mass and steric demand of the dendrons is reduced by roughly 50 %. Molecular dynamics simulations on models of PG2 reveal its helical conformation to be right-handed, irrespective of backbone tacticity, and initial results also indicate that de-PG2 retains the right-handedness.     

Self-organizable vesicular columns assembled from polymers dendronized with semifluorinated Janus dendrimers act as reverse thermal actuators

The synthesis and structural analysis of polymers dendronized with self-assembling Janus dendrimers containing one fluorinated and one hydrogenated dendrons are reported. Janus dendrimers were attached to the polymer backbone both from the hydrogenated and from the fluorinated parts of the Janus dendrimer. Structural analysis of these dendronized polymers and of their precursors by a combination of differential scanning calorimetry, X-ray diffraction experiments on powder and oriented fibers, and electron density maps have demonstrated that in both cases the dendronized polymer consists of a vesicular columnar structure containing fluorinated alkyl groups on its periphery. This vesicular columnar structure is generated by a mechanism that involves the intramolecular assembly of the Janus dendrimers into tapered dendrons followed by the intramolecular self-assembly of the resulting dendronized polymer in a vesicular column. By contrast with conventional polymers dendronized with self-assembling tapered dendrons this new class of dendronized polymers acts as thermal actuators that decrease the length of the supramolecular column when the temperature is increased and therefore, are called reverse thermal actuators. A mechanism for this reversed process was proposed.     

Two-dimensional surface chirality control by solvent-induced helicity inversion of a helical polyacetylene on graphite

We report the direct evidence for the macromolecular helicity inversion of a helical poly(phenylacetylene) bearing l- or d-alanine pendants with a long alkyl chain in different solvents by atomic force microscopy observations of the diastereomeric helical structures. The diastereomeric helical poly(phenylacetylene)s induced in polar and nonpolar solvents self-assembled into ordered, two-dimensional helix bundles with controlled molecular packing, helical pitch, and handedness on graphite upon exposure of each solvent. The macromolecular helicity deposited on graphite from a polar solvent further inverted to the opposite handedness by exposure to a specific nonpolar solvent, and these changes in the surface chirality based on the inversion of helicity could be visualized by atomic force microscopy with molecular resolution, and the results were quantified by X-ray diffraction of the oriented liquid crystalline, diastereomeric helical polymer films.     

Rodlike macromolecules through spatial overlapping of thiophene dendrons

Two novel dendritic macromonomers 7 and 8 functionalized with electroactive conjugated thiophene oligomers were synthesized by stepwise cross‐coupling reactions and the introduction of a vinyl group at the focal point. Both macromonomers were polymerized into dendronized polymers 9 and 10 by using a radical polymerization method. The photophysical and redox behaviors of dendronized polymers 9 and 10 are significantly different from those of the corresponding macromonomers. This difference may result from the spatial overlapping of thiophene dendrons through π–π interactions when the dendrons are connected to a polymer backbone. The dendronized polymers can organize into large‐area two‐dimensional sheets with a thickness of 4.8 nm. Polymer 9 , which has all‐dendritic thiophene side chains, exhibited enhanced conductivity by partial doping with iodine or nitrosonium tetrafluoroborate (NOBF₄). The novel amphiphilic dendronized polymer 15 was synthesized by the atom‐transfer radical polymerization of macromonomer 7 from a poly(ethylene glycol) (PEG) macroinitiator and was found to have a self‐organized structure in water.     

Coordination-driven inversion of handedness in ligand-modified PNA

Peptide nucleic acid (PNA) is a synthetic analogue of DNA, which has the same nucleobases as DNA but typically has a backbone based on aminoethyl glycine (Aeg). PNA forms duplexes by Watson Crick hybridization. The Aeg-based PNA duplexes adopt a chiral helical structure but do not have a preferred handedness because they do not contain a chiral center. An L-lysine situated at the C-end of one or both strands of a PNA duplex causes the duplex to preferably adopt a left-handed structure. We have introduced into the PNA duplexes both a C-terminal L-lysine and one or two PNA monomers that have a γ-(S)-methyl-aminoethyl glycine backbone, which is known to induce a preference for a right-handed structure. Indeed, we found that in these duplexes the γ-methyl monomer exerts the dominant chiral induction effect causing the duplexes to adopt a right-handed structure. The chiral PNA monomer had a 2,2':6',2'-terpyridine (Tpy) ligand instead of a nucleobase and PNA duplexes that contained one or two Tpys formed [Cu(Tpy)(2)](2+) complexes in the presence of Cu(2+). The CD spectroscopy studies showed that these metal-coordinated duplexes were right-handed due to the chiral induction effect exerted by the S-Tpy PNA monomer(s) except for the cases when the [Cu(Tpy)(2)](2+) complex was formed with Tpy ligands from two different PNA duplexes. In the latter case, the metal complex bridged the two PNA duplexes and the duplexes were left-handed. The results of this study show that the preferred handedness of a ligand-modified PNA can be switched as a consequence of metal coordination to the ligand. This finding could be used as a tool in the design of functional nucleic-acid based nanostructures.     

Processable hybrids of ferrocene-containing poly(phenylacetylene)s and carbon nanotubes: fabrication and properties

A group of ferrocene-containing poly(phenylacetylene)s (PPAs) with different alkyl spacers were synthesized by using organorhodium complexes [Rh(diene)Cl](2) and Rh (+)(nbd)[C(6)H(5)B (-)(C(6)H(5))(3)] as catalysts. With the aid of pi-pi interactions between the walls of carbon nanotubes (CNTs) and the PPA skeleton together with the ferrocene pendants, the polymer (P 1, P2(5) and P2(10)) chains effectively wrapped round the shells of both single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs). The "additive effect" of the PPA skeleton and the ferrocene pendants in dispersing the SWNTs and MWNTs resulted in the generation of highly soluble hybrids. The solubilities of P 1-functionalized SWNTs and MWNTs in tetrahydrofuran (THF) are up to 633 mg/L and 967 mg/L, respectively. They are much higher than the solubilities of M 1-modified SWNTs and MWNTs, which are only 167 mg/L and 133 mg/L in THF. The results indicate the existence of a powerful polymer effect on dispersing CNTs. The high solubilities of the hybrids in organic solvents allowed us to fabricate high-quality and large-area films. Meanwhile, the desirable loading of ferrocene-containing PPAs onto the CNTs offered polymer/CNTs hybrids with multiple redox centers and ferrocene-featured electrochemical properties. The P 1/MWNT hybrid exhibits evident optical-limiting properties. At high incident laser fluence, the optical-limiting power of P 1/MWNT is higher than that of C(60), a well-known optical limiter. Thermal analyses indicate that the decomposition temperatures ( T(d), the temperature at which a sample loses its 5% weight) for P1 and P1/MWNT are 342 and 346 degrees C, respectively, much higher than that for PPA (225 degrees C). Thus the attachment of a ferrocene pendant to a PPA backbone, followed by hybridization with CNTs, improved the thermal stability. Upon pyrolysis, both the polymer and the polymer/CNTs hybrid gave rise to superparamagnetic ceramics; the saturation magnetizations ( M(s)) of the ceramics derived from P1 and P1/MWNT are 29.9 and 26.9 emu/g, respectively. The latter datum is in the list of the best results reported for the magnetic nanocomposites obtained by the attachment of magnetic nanoparticles onto CNTs.     

Solvent polarity driven helicity inversion and circularly polarized luminescence in chiral aggregation induced emission fluorophores

Development of functional materials capable of exhibiting chirality tunable circularly polarized luminescence (CPL) is currently in high demand for potential technological applications. Herein we demonstrate the formation of both left- and right-handed fluorescent helical superstructures from each enantiomer of a chiral tetraphenylethylene derivative through judicious choice of the solution processing conditions. Interestingly, both the aggregation induced emission active enantiomers exhibit handedness inversion of their supramolecular helical assemblies just by varying the solution polarity without any change in their molecular chirality. The resulting helical supramolecular aggregates from each enantiomer are capable of emitting circularly polarized light, thus enabling both right- and left-handed CPL from a single chiral material. The left- and right-handed supramolecular helical aggregates in the dried films have been characterized using spectroscopy, scanning electron microscopy, and transmission electron microscopy techniques. These new chiral aggregation induced emission compounds could find applications in devices where CPL of opposite handedness is required from the same material and would facilitate our understanding of the formation of helical assemblies with switchable supramolecular chirality.

The formation of both left- and right-handed helical superstructures with circularly polarized luminescence has been achieved in a chiral tetraphenylethylene derivative just by varying the solution polarity without any change in molecular chirality.     

Spectroscopic evidence for diastereomeric helical segments of polysilane bearing enantiopure (S)- and (R)-3,7-dimethyloctyl groups

We synthesized two optically active helical polysilanes, poly[(S)-3,7-dimethyloctyl-3-phenylpropylsilane] (PS1) and poly[(R)-3,7-dimethyloctyl-3-phenylpropylsilane] (PS2), bearing a flexible and rodlike silicon main chain and enantiopure alkyl side chains with (S)- and (R)-chiral centers, respectively, at the γ-positions. PS1 and PS2 underwent a thermodriven helix–helix transition at 10 °C in isooctane. Circular dichroism (CD) and UV studies demonstrated the transition characteristics, such as the transition temperature, population of right- and left-handed helical motifs, global shape, and screw pitch. At −80 °C, the dissymmetry ratio suggested that a preferential right-handed or left-handed screw sense was present in the polymer chains of PS1 and PS2, respectively. However, above the transition temperature, the appearance of a bisignate cotton band in the CD spectra suggested that both right-handed screw-sense, tight helical segments and left-handed screw-sense, loose helical segments coexisted in the same chains of PS1 and PS2. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4518–4527, 2004     

Synthesis and chiroptical properties of helical polyallenes bearing chiral cholesteryl pendant groups

A cholesteryloxyallene (1) bearing chiral cholesteryl pendant group was designed and synthesized. Living polymerization of this monomer with an allylnickel complex as a catalyst give poly(cholesteryloxyallene)s (poly‐ 1 _ms) in high yields with controllable molecular weights and narrow molecular weight distributions. These polymers were found to possess a dynamic helical conformation with a preferred handedness in n‐hexane as confirmed by circular dichroism and absorption spectra as well as optical ratios. The helical conformation of the polymers was revealed to stabilize as the number of repeat units increased until the degree of polymerization reached 100. The helical conformation of poly‐ 1 ₁₀₀ could be controlled by altering the temperature of solutions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2227–2233     

Synthesis and Conformations of Dendronized Poly(L-lysine)

Dendronized polymers based on a poly(L-lysine) backbone have been synthesized up to the fourth generation. The hydroxyl-terminated polymers are completely water-soluble, which makes them good candidates for drug delivery applications. The dendronized polypeptide backbones are helical at lower generations, but undergo a dramatic conformational change from alpha-helical to disordered upon increasing the dendron size to the third generation. This conformational change, attributed to steric repulsions between dendrons, is supported by spectroscopic measurements while chain extension upon dendronization is confirmed by scanning force microscopy.     

A correlation between the absolute configuration of alkyl aryl sulfoxides and their helical twisting powers in nematic liquid crystals

In this paper, for the first time, a systematic experimental and theoretical analysis of the cholesteric induction due to solutes whose chirality is originated only by a single stereogenic center has been carried out. The twisting power beta of a series of alkyl aryl sulfoxides has been determined in several nematic solvents. The sign of beta, which reflects the handedness of the induced helical arrangement of the solvent molecules, correlates with the configuration of the stereogenic sulfur in the nematic solvents E7, Phase 1083, and ZLI 2359: (S)-configurated dopants induce (M)-chiral nematics. (S)-Configurated cyclic sulfoxides, which are forced to adopt a different conformation with respect to the parent acyclic compounds, induce, instead, right-handed chiral nematics. The experimental data have been interpreted in the light of the surface chirality model, which allows the calculation of beta in terms of the molecular properties of the dopant, namely, the anisotropy and helicity of its molecular surface. The calculations reliably reproduce the behavior experimentally observed. The more flexible, open-chain compounds investigated induce chiral nematics of opposite handedness in MBBA and Phase 1053: temperature-dependent experiments point out the importance of the conformation in determining the effective sign of beta. The results have been discussed in terms of different conformation populations in these latter solvents with respect to E7, Phase 1083, and ZLI 2359.     

Noncovalent domino effect on helical screw sense of chiral peptides possessing C-terminal chiral residue

Recently, a novel chiral intermolecular interaction was found in an N-deprotected achiral nonapeptide that undergoes the predominance of one-handed screw sense through the addition of chiral small carboxylic acid (Inai, Y.; Tagawa, K.; Takasu, A.; Hirabayashi, T.; Oshikawa, T.; Yamashita, M. J. Am. Chem. Soc. 2000, 122, 11731). We here clarify to what extent such noncovalent chiral domino effect affects the helical screw sense of an N-deprotected chiral peptide. Two chiral peptides consisting of C-terminal L-Leu (1) or L-Leu(2) (2) and the preceding achiral helical octapeptide segment were employed. NMR and IR spectroscopy, and energy calculation indicated that both peptides adopt a helical conformation in chloroform. Peptide 1 showed a small excess of a left-handed screw sense for the achiral helical octapeptide, but peptide 2 strongly preferred a right-handed screw sense. The addition of chiral Boc amino acid to a chloroform solution of peptide 1, depending on its chirality, underwent a unique helix-to-helix transition or led to remarkable stabilization of the original left-handed screw sense. Peptide 2 retained the original right-handed screw sense on addition of chiral Boc-amino acid, but its helical stability changed to some extent depending on its added chirality. Therefore, the importance of noncovalent domino effect for controlling the helical screw sense or helical stability of a chiral peptide has been demonstrated here for the first time. In addition, we here have presented a unique system that both N-terminal noncovalent and C-terminal covalent domino effects operate simultaneously on the helical screw sense of a single achiral segment and have compared both powers for inducing the screw sense bias.     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

Temperature‐Induced Chiroptical Changes in a Helical Poly(phenylacetylene) Bearing N,N‐Diisopropylaminomethyl Groups with Chiral Acids in Water

A stereoregular poly(phenylacetylene) bearing an N,N‐diisopropylaminomethyl group as the pendant (poly‐ 1 ) changed its structure into the prevailing one‐handed helical conformation upon complexation with optically active acids in water. The complexes exhibited induced circular dichroism (ICD) in the UV/Vis region of the polymer backbone. Poly‐ 1 is highly sensitive to the chirality of chiral acids and can detect a small enantiomeric imbalance in these acids, in particular, phenyl lactic acid in water. For example, a 0.005 % enantiomeric excess of phenyl lactic acid can be detected by CD spectroscopy. The observed ICD intensity and pattern of poly‐ 1 were dependent on the temperature and concentration of poly‐ 1 , probably due to aggregations of the polymer at high temperature as revealed by dynamic light scattering and AFM. On the basis of the temperature‐dependent ICD changes, the preferred chiral helical sense of poly‐ 1 was found to be controlled by noncovalent bonding interactions by using structurally different enantiomeric acids.