多金属氧酸盐催化苯甲醇的选择性氧化：一个绿色可循环的高效催化氧化体系

以Keggin结构的几类杂多酸和三乙胺(TEA)为原料,通过简单的酸碱反应合成了相应杂多酸的TEA盐。并以它们作为催化剂,30%H2O2作氧化剂,在不使用长链相转移剂的条件下,研究了它们催化苯甲醇选择氧化制备苯甲醛的反应性能。结果表明,该类催化剂在苯甲醇的选择氧化反应中具有比相应杂多酸更高的催化活性或选择性。其中[TEAH]H2PW12O40为最佳催化剂,在适宜的反应条件下,该催化剂上苯甲醇转化率可达99.5%以上,苯甲醛选择性达～100%。催化剂可以被分离和循环使用多次,活性、选择性基本不变。用水作溶剂,避免了有机溶剂的使用,是一个高效、绿色的苯甲醛选择氧化体系。     

磷钼杂多蓝作为反应控制相转移催化剂

设计合成了第一个由磷钼杂多蓝作为反应控制相转移催化剂的反应体系，用于对环己烯进行催化环氧化，苯甲醇进行催化氧化．在体系中，催化剂以均相的方式催化反应，以多相的方式分离回收．催化剂显示了很高的催化活性和稳定性．在催化氧化苯甲醇的反应中，H2O2的利用率为100％，苯甲醛的选择性为100％．     

Pd/PMO-SBA-15 催化剂催化苯甲醇选择氧化反应性能

 研究了 PMO-SBA-15 材料负载的金属钯纳米粒子 (Pd/PMO-SBA-15) 在水相中催化苯甲醇选择氧化制苯甲醛的反应. 考察了纳米粒子种类、氧化剂用量、反应时间和反应温度等对苯甲醇转化率及苯甲醛选择性的影响. 结果表明, 以水为溶剂, 以 H2O2 (30%) 为氧化剂时, 可得到较高的苯甲醇转化率和苯甲醛选择性. 当以 0.05 g 的 2%Pd/PMO-SBA-15 为催化剂, H2O2 用量为 1.5 ml, 反应温度为 80 oC, 反应 4 h 时, 苯甲醇转化率和苯甲醛选择性分别达到 97.1% 和 100.0%. 对该催化体系的重复使用性能进行了考察. 结果发现, 随着使用次数的增加, 苯甲醇转化率有所下降, 但苯甲醛选择性保持不变.     

苯甲醇的绿色选择性氧化

醇的氧化是制备醛和酮的重要反应之一,也是有机化学理论教学和实验教学的一个重点内容。目前,大多数本科生实验教材安排了环己醇氧化合成环己酮的实验。虽然现有实验教材提供了一例将伯醇氧化为醛的方案,即采用Na₂WO₄·2H₂O/（C₄H₉）₄NHSO₄催化体系,在90°C用H₂O₂将苯甲醇选择性氧化为苯甲醛,但是存在着产率低、安全性不高和重金属污染等问题。本文采用Fe（NO₃）₃·9H₂O、4-羟基-2,2,6,6-四甲基哌啶氧化物（4-OH-TEMPO）和乙酸（HOAc）为催化剂、O₂为氧化剂,以H₂O为溶剂,在温和的反应条件下高选择性地将苯甲醇氧化为苯甲醛,分离产率可达91%,这为伯醇的选择性氧化提供了一个低成本且高效绿色的实验教学新方案。同时,在实验过程中引入薄层色谱、气相色谱、快速制...     

Zn取代的磷钨酸季铵盐无溶剂氧化苯甲醇合成苯甲醛

合成了一系列过渡金属Zn取代的Keggin型磷钨杂多酸的季铵盐,采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)等方法表征了杂多化合物的结构.并将其用于苯甲醇无溶剂氧化合成苯甲醛的反应,考察了催化剂种类、反应条件对苯甲醇氧化的影响.实验结果表明,在无任何溶剂的情况下,Zn取代的Keggin型磷钨四丁基铵盐具有最佳的催化活性,反应时间仅为30 min,苯甲醇的转化率可以达到95.6%,苯甲醛的选择性达到了96.4%.在对杂多酸季铵盐结构的研究基础上,对可能的反应机理进行了初步探讨.     

钛钨改性HMS的合成及催化氧化苯甲醇合成苯甲醛

通过改变硅钛摩尔比和硅钨摩尔比合成了Ti-HMS和Ti/W-HMS型分子筛,并进行了NH3-TPD测试分析. 结果表明,当n(Si)∶ n(Ti)=30∶ 1、n(Si)∶ n(W)=400∶ 1时,分子筛的酸量最大. 利用上述不同HMS为催化剂,ω(H2O2)=30%的H2O2水溶液为氧化剂,在无有机溶剂及相转移催化剂条件下,氧化苯甲醇制备苯甲醛. 结果表明,Ti/W-HMS可选择性氧化苯甲醇制备苯甲醛;催化剂的酸量和酸强度越大,越有利于提高催化活性和选择性. 利用Ti(30)/W(400)-HMS为催化剂,当n(醇)∶ n(H2O2)=1∶ 2、ω(催化剂)=4%、反应时间为5 h时,苯甲醇的转化率和苯甲醛的选择性分别为72.6%、96.9%. 催化剂重复使用4次后,苯甲醇的转化率和苯甲醛的选择性分别为63.2%、89.1%.     

钨过氧酸盐离子液体催化过氧化氢氧化苯甲醇制苯甲酸

用甲基三辛基氯化铵和钨酸钠一步法合成甲基三辛基季铵钨酸盐离子液体[(CH3)N(n-C8H17)3]2W2O11,以该离子液体为催化剂,在无反应溶剂条件下催化过氧化氢氧化苯甲醇生成苯甲酸。考察了反应温度、催化剂用量以及氧化剂过氧化氢用量对苯甲酸产率的影响。确定优化条件:反应温度70℃,苯甲醇用量5 mmol,催化剂用量是底物的0.4%(摩尔分数),30%过氧化氢用量2 mL,苯甲醇的转化率可达99%,苯甲酸选择性为98%。该方法具有反应条件温和、产率高和选择性好的优点。     

金属卟啉/MgAl水滑石催化醇选择性氧化制备羰基化合物

将MgAl水滑石引入到金属四苯基卟啉(MTPPs,M=Co,Fe,Mn,Ni)催化氧化体系中,实现了醇的选择性氧化。 结果表明,在分子氧/异丁醛体系中,CoTPP在苯甲醇氧化制苯甲醛反应中表现出优异的催化活性,MgAl水滑石添加剂可有效地提高醛的选择性。 在苯甲醇1 mmol、乙腈2 mL、CoTPP 5 mg、MgAl水滑石18 mg、异丁醛5 mmol、反应温度60 ℃、氧气气氛下反应2 h,苯甲醇的转化率和苯甲醛的选择性分别达到94%和92%。 另外,此催化体系在其它醇类化合物的氧化反应中也具有较好催化活性。     

5,7-二甲氧基-4-甲基苯酞和5,7-二羟基-4-甲基苯酞的新合成方法

以3,5-二甲氧基苯甲醇为起始原料, 经过五步反应, 合成了5,7-二甲氧基-4-甲基苯酞和5,7-二羟基-4-甲基苯酞这两个用于合成霉酚酸的重要中间体, 产率分别达到80%和72%. 6-氯甲基-2,4-二甲氧基苯甲醛经过亚氯酸钠氧化成酸的同时发生内酯化反应生成5,7-二甲氧基苯酞是最关键的一步.     

WS_2/WO_3光催化选择性氧化苯甲醇制备苯甲醛

采用H2S高温硫化WO3的方法制备了一系列WS2/WO3光催化剂,利用X射线粉末衍射仪、紫外可见光谱仪分析了产物的结构及光吸收性能,考察了WS2/WO3光催化剂光催化选择性氧化苯甲醇制备苯甲醛的性能,讨论了WS2的含量、反应时间、反应液pH对光催化选择性氧化反应过程的影响.结果表明:与WO3和经深度硫化的WO3相比,适当的硫化能显著改善催化剂对苯甲醇的选择性氧化行为,反应时间及pH对苯甲醇的转化率及生成苯甲醛的选择性均有重要影响.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.