Preparation and characterization of core-shell nanoparticles hardened by gamma-ray

Core-shell nanoparticles have been prepared by irradiation of gamma-ray on block copolymer micelles consisting of hydrophilic polyacrylic acid and hydrophobic polyisoprene with each 40 monomer units. The structure was determined by means of dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The size distribution of the core-shell nanoparticles determined by DLS and AFM was very narrow. The average diameter of the particles decreased from 48 nm for the original micelles to 26 nm by the irradiation of 30 kGy. The core size determined by SAXS combined with DLS was roughly constant of 10 nm, irrespective of irradiation dose, whereas the shell thickness of the micelles was twice as large as the core size, and decreased with increasing irradiation dose.     

Micellar Behavior of Polystyrene-Poly(Ethylene Oxide) Diblock Copolymers in Aqueous Media: Effect of Copolymer Composition,Temperature, Salt,and Surfactants

Formation and structure of micelles from two amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers (PS mol.wt. 1000; PEO mol.wt. 3000 and 5000) were examined by surface tension, viscosity, steady state fluorescence, dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryo-transmission electron microscopy (cryo-TEM). The critical micelle concentration (CMC) of the copolymers in aqueous solution was ca. 0.05%; micelle hydrodynamic diameter was 30–35 nm with a narrow size distribution. SANS studies show that the copolymers form ellipsoidal micelles with semi major axis ～23 nm and semi minor axis ～8 nm. No significant change in the structure was found with temperature and presence of salt. The copolymer micelles interaction with the ionic surfactants sodium dodecyl sulphate (SDS) and dodecyltrimethylammonium bromide (DTAB) was also examined by DLS and SANS.     

Micelle Formation and Aggregate Morphology Transition from Vesicle to Rod Micelle for Allyl Alkyldimethylammonium Bromide Cationic Surfactant

A series of cationic surfactants of allyl alkyldimethylammonium bromide (AA_nDB), where n=12, 16, 18, were synthesized, and the adsorption behavior of AA_nDB at the air–water interface and the aggregation morphology in bulk solution were reported. The critical micelle concentration (CMC) was determined by the drop volume technique and steady state fluorescence. The surface excess concentration of AA_nDB surfactants was calculated from the surface tension versus log concentration curves by applying the Gibbs' adsorption isotherm. The values of surface area per molecule calculated by using Gibbs' equation were 2.9–1.4 nm², indicating the relatively large size of the AA_nDB surfactants. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements reveal that, at low surfactant concentration of allyl dodecyl dimethylammonium bromide (AA₁₂DB) above CMC, vesicles can be spontaneously formed. However, with increasing surfactant concentration, vesicles tend to be transformed into rod‐like micelles.     

Self-Assembly of Trisiloxane-Tailed Sugar Surfactant in Aqueous Solution

Abstract

A lactobionamide-based trisiloxane surfactant (Si3N2–LA) was prepared via a two-step method. Structure characterization of Si3N2–LA was performed by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). Surface activity and aggregation behavior in aqueous solution of Si3N2–LA were investigated by surface tension measurements, dynamic light scattering (DLS) and negative-stained transmission electron microscopy (TEM). The results show that the surfactants can self-assemble into spherical vesicles with diameters in the range from 50 to 150 nm due to the introduction of trisiloxane tail.     

Aggregation behavior of amphiphilic random copolymer of 2‐(acrylamido)‐2‐methylpropanesulfonic acid and tris(trimethylsiloxy)silylpropylmethacrylate in aqueous solution

Aggregation behavior including dilute solution property and surface‐activity of the amphiphilic random copolymer composed of 2‐(acrylamido)‐2‐methylpropanesulfonic acid and tris(trimethylsiloxy)silylpropylmethacrylate (AMPS/TRIS copolymer) in aqueous solution were studied by static light scattering (SLS), dynamic light scattering (DLS), surface tension measurement, and transmission electron microscopy (TEM). The surface tension measurement made it clear that AMPS/TRIS copolymer exhibited weaker surface‐activity than a typical low‐molecular weight surfactant sodium dodecyl sulfate in water, that is, there were no plateau of surface tension γ versus concentration and no critical micelle concentration (CMC) in the whole concentration studied. SLS and DLS analyses, and TEM revealed that AMPS/TRIS copolymer self‐associated into imperfect core‐shell micelles having hydrophobic TRIS core surrounded by hydrophilic AMPS shell in water. AMPS shell was considered as a hard shell due to the stiffness of AMPS chain in water. TRIS chain could not densely aggregate in water due to the large steric hindrance between bulky trimethylsiloxy groups despite its hydrophobic nature, thereby providing TRIS core with less‐dense structure. The balance between the spreading force of stiff AMPS chain and the cohesion force of bulky TRIS chain provides the driving force for forming the unique micelle having less‐dense TRIS core and hard AMPS shell. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Influence of surfactant structure on reverse micelle size and charge for nonpolar electrophoretic inks

Electrophoretic inks, which are suspensions of colorant particles that are controllably concentrated and dispersed by applied electric fields, are the leading commercial technology for high-quality reflective displays. Extending the state of the art for high-fidelity color in these displays requires improved understanding and control of the colloidal systems. In these inks, reverse micelles in nonpolar media play key roles in media and particle charging. Here we investigate the effect of surfactant structure on reverse micelle size and charging properties by synthesizing different surfactants with variations in polyamine polar head groups. Small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) were used to determine the micelle core plus shell size and micelle hydrodynamic radius, respectively. The results from SAXS agreed with DLS and showed that increasing polyamines in the surfactant head increased the micelle size. The hydrodynamic radius was also calculated on the basis of transient current measurements and agreed well with the DLS results. The transient current technique further determined that increasing polyamines increased the charge stabilization capability of the micelles and that an analogous commercial surfactant OLOA 11000 made for a lower concentration of charge-generating ions in solution. Formulating magenta inks with the various surfactants showed that the absence of amine in the surfactant head was detrimental to particle stabilization and device performance.     

Synthesis and Properties of Gluconamide-Based Trisiloxane Surfactant

A gluconamide-based trisiloxane surfactant (Si3N2-GA) was prepared via a two-step method. Structure characterization of the Si3N2-GA was performed by fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). Surface activity and aggregation behavior in aqueous solution of the Si3N2-GA were investigated by surface tension measurements, dynamic light scattering (DLS), and negative-stained transmission electron microscopy (TEM). The results show that the critical micelle concentration (CAC) and surface tension (γ_CAC) at the cmc in aqueous solution of the Si3N2-GA are 3.77 × 10^?4 M and 20.5 mN · m^?1, respectively, and the surfactants can self-assemble into spherical vesicle with diameters in the range from 50 to 150 nm.     

Self-assembly of amphiphilic glycoconjugates into lectin-adhesive nanoparticles

This work describes the synthesis and self-assembly of carbohydrate-clicked rod-coil amphiphilic systems. Copper-catalyzed Huisgen cycloaddition was efficiently employed to functionalize the hydrophilic extremity of PEG-b-tetra(p-phenylene) conjugates by lactose and N-acetyl-glucosamine ligands. The resulting amphiphilic systems spontaneously self-assembled into nanoparticles when dissolved in aqueous media, as evidenced by dynamic light scattering (DLS), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). The formation of highly monodisperse micelles having a mean diameter of 10 nm was observed for systems containing a PEG 900 core, and a decrease in the hydrophilic moiety (PEG 600) led to the formation of vesicles with a broader size distribution. The presence of carbohydrate residues on the surfaces of the micelles and their ability to establish specific interactions with wheat germ agglutinin (WGA) and peanut agglutinin (PNA) were further highlighted by light-scattering measurements, thus confirming the attractive applications of such sugar micelles in biosensor devices.     

Micelles of poly(styrene-b-2-vinylpyridine-b-ethylene oxide) with blended polystyrene core and their application to the synthesis of hollow silica nanospheres

Core-shell-corona (CSC) micelles of asymmetric triblock copolymer, poly(styrene-b-2-vinylpyridine-b-ethylene oxide) (PS-PVP-PEO), containing polystyrene homopolymer (homo-PS) in the core were successfully prepared in aqueous media. The influence of homo-PS contents over the formation of the micelles was investigated thoroughly by various techniques such as dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and fluorescence spectroscopy. It was found that the size of the PS core of the micelle was increased by the addition of homo-PS as observed by DLS and TEM techniques. The SEM and TEM measurements confirm the spherical morphology of the micelles and enlargement of PS core over the addition of homo-PS. The increase in the PS core volume of the PS-PVP-PEO micelles is attributed to the insertion of homo-PS in the PS core. The micelles have also been demonstrated as facile soft templates for synthesis of hollow silica nanospheres. The average diameter of the spherical hollow particles could be tuned between 30.6 and 38.8 nm with cavity sizes ranging from 20.7 to 28.5 nm using tetramethoxysilane as silica precursors under mild acidic conditions. The facile synthesis of hollow silica using the CSC micelles with different homo-PS contents indicates that the hollow void size can be controlled within a range of several nanometers.     

Fabrication and morphology control of hollow polymer particles by altering core particle size

Particles with various morphologies were fabricated by changing the size of carboxyl-containing core particles and performing seeded emulsion polymerization as well as alkali posttreatment. The distribution of carboxyl groups, size, and morphology of the resultant particles were characterized with conductometric titration, dynamic light scattering (DLS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Results indicated that the size of carboxyl-containing core latex particles could be varied from 95 to 240 nm by adjusting the concentration of sodium dodecyl sulfate (SDS). The percentage of carboxyl groups buried inside particles increased clearly along with the encapsulation of core by interlayer and shell polymers, and seeded emulsion copolymerization performed smoothly except the system using core particles with size less than 99 nm. After alkali posttreatment, the morphologies of corresponding particles showed porous, hollow, and bowl-like structure, respectively. Moreover, the relationship between core particle size and alkali-treated particle morphology was elucidated briefly.     

Effect of Increasing Concentration of Each of Three Polar Solvents (1,4-Dioxane, Dimethyl Sulfoxide, N,N-Dimethylformamide) on Changes in the Shape of Polysorbate 20 Micelles

The effect of increasing concentration of each of three polar solvents [0–40 % (v/v) 1,4-dioxane, 0–40 % (v/v) dimethyl sulfoxide (DMSO), and 0–60 % (v/v) N,N-dimethylformamide (DMF)] on changes in the shape of the surfactant polysorbate 20 (Tween 20) micelles in the aqueous, polar solvent, sodium phosphate buffer solutions (pH = 7.2, ionic strength 2.44 mmol·L^?1) were investigated by using small-angle X-ray scattering. The effect of increasing concentration of 1,4-dioxane is that the micelle shape changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 10 and 20 % (v/v) 1,4-dioxane, and then from core–shell disc micelles to core–shell elliptic disc micelles between concentrations of 30 and 40 % (v/v) 1,4-dioxane. The effect of increasing concentration of DMSO is that the micelles changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 0 and 10 % (v/v) DMSO. The effect of increasing concentration of DMF is that it changed the core–shell cylindrical micelles to core–shell disc micelles between concentrations of 30 and 40 % (v/v) DMF. The common effect is that the solvents shortened the height of the micelle, that is, they squashed the micelle. Moreover, the specific effect of 1,4-dioxane is that this solvent squashed and squeezed the micelle.     

A Study of the Emulsified Microemulsion by SAXS,Cryo‐TEM,SD‐NMR,and Electrical Conductivity

A water‐in‐oil microemulsion was further dispersed in an aqueous phase containing Pluronic F127 as a steric stabilizer, to form a specific type of double emulsion termed emulsified microemulsion (EME). The inner microemulsion phase was made from glycerol‐monooleate (GMO), R(+)‐limonene, ethanol and glycerol. SAXS (small x‐ray scattering), PGSE‐NMR (pulse gradient spin echo‐NMR), electrical conductivity, and cryo‐TEM (cryogenic‐transmission electron microscopy) imaging techniques were used to confirm the existence of inner W/O nano‐droplets after second emulsification step and upon EME aging. Spherical globules of EME without long‐range internal order were observed by the SAXS measurements and the cryo‐TEM images. The average globule size of about 200–300 nm remained intact for at least 6 months.     

Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions

The mechanism of silica particle formation in monomer microemulsions is studied using dynamic light scattering (DLS), atomic force microscopy, small-angle X-ray scattering (SAXS), and conductivity measurements. The hydrolysis of tetraethylorthosilicate (TEOS) in methylmethacrylate (MMA) microemulsions (MMA = methylmethacrylate) is compared with the formation of SiO₂ particles in heptane microemulsions. Stable microemulsions without cosurfactant were found for MMA, the nonionic surfactant Marlophen NP10, and aqueous ammonia (0.75 wt%). In the one-phase region of the ternary phase diagram, the water/surfactant ratio (R _w) could be varied from 6 to 18. The DLS and SAXS measurements show that reverse micelles form in these water-in-oil (w/o) microemulsions. The minimum water-to-surfactant molar ratio required for micelle formation was determined. Particle formation is achieved from the base-catalyzed hydrolysis of TEOS. According to atomic force microscopy measurements of particles isolated from the emulsion, the particle size can be effectively tailored in between 20 and 60 nm by varying R _w from 2–6 in heptane w/o microemulsions. For MMA-based microemulsions, the particle diameter ranges from 25 to 50 nm, but the polydispersity is higher. Tailoring of the particle size is not achieved with R _w, but adjusting the particle growth period produces particles between 10 and 70 nm.     

Surfactant/nonionic copolymer interaction: a SLS, DLS, ITC, and NMR investigation

The interactions between an oxyphenylethylene-oxyethylene nonionic diblock copolymer with the anionic surfactant sodium dodecyl sulfate (SDS) have been studied in dilute aqueous solutions by static and dynamic light scattering (SLS and DLS, respectively), isothermal titration calorimetry (ITC), and 13C and self-diffusion nuclear magnetic resonance techniques. The studied copolymer, S20E67, where S denotes the hydrophobic styrene oxide unit and E the hydrophilic oxyethylene unit, forms micelles of 15.6 nm at 25 degrees C, whose core is formed by the styrene oxide chains surrounded by a water swollen polyoxyethylene corona. The S20E67/SDS system has been investigated at a copolymer concentration of 2.5 g dm(-3), for which the copolymer is fully micellized, and with varying surfactant concentration up to approximately 0.15 M. When SDS is added to the solution, two different types of complexes are observed at various surfactant concentrations. From SLS and DLS it can be seen that, at low SDS concentrations, a copolymer-rich surfactant mixed micelle or complex is formed after association of SDS molecules to block copolymer micelles. These interactions give rise to a strong decrease in both light scattering intensity and hydrodynamic radius of the mixed micelles, which has been ascribed to an effective reduction of the complex size, and also an effect arising from the increasing electrostatic repulsion of charged surfactant-copolymer micelles. At higher surfactant concentrations, the copolymer-rich surfactant micelles progressively are destroyed to give surfactant-rich-copolymer micelles, which would be formed by a surfactant micelle bound to one or very few copolymer unimers. ITC data seem to confirm the results of light scattering, showing the dehydration and rehydration processes accompanying the formation and subsequent destruction of the copolymer-rich surfactant mixed micelles. The extent of interaction between the copolymer and the surfactant is seen to involve as much as carbon 3 (C3) of the SDS molecule. Self-diffusion coefficients corroborated light scattering data.     

Green Synthesis and Characterization of Silver Nanoparticles Using Ascomycota Fungi Penicillium nalgiovense AJ12

A new method for green synthesis of silver nanoparticles using the cell-free filtrate of Penicillium nalgiovense AJ12 as reducing and protecting agent was described. The pathway is based on the reduction of Ag¹⁺ by protein(s). Various techniques such as UV–Vis spectroscopy, transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared and Zeta potential measurements were used to characterize the silver nanoparticle obtained. The results revealed synthesis of the spherical silver nanoparticles coated with protein(s). The average size of the particles obtained from TEM was 15.2 ± 2.6 nm. DLS measurements showed that the particle size was higher than that estimated from TEM measurements and was 25.2 ± 2.8 nm. Studies on the role of the cell-free filtrate proteins in the synthesis of silver nanoparticles indicated that the process is non-enzymatic but involves amino acids interactions with silver ions. It was found that the aqueous silver nanoparticles suspensions exhibited excellent stability over a wide range of ionic strength, pH and temperature.     

Synthesis and Characterization of Thermo-responsive Poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) Micelles

A novel thermo-responsive diblock copolymer of poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) (PNVP-b-PNIPAM) was synthesized. FT-IR, ¹H-NMR and SEC results confirmed the successful synthesis of PNVP-b-PNIPAM diblock copolymer via anionic polymerization. The polymeric micelles formed from PNVP-b-PNIPAM copolymer in aqueous solution were developed and characterized as a potential thermo-responsive and biocompatible drug delivery system. Micellization of the diblock copolymer in aqueous solution was characterized by dynamic laser scattering (DLS), turbidity measurement, tension measurement and transmission electron microscopy (TEM). The thermo-responsive polymeric micelles with the size ranges of 200 to 260 nm and thickness of 30 nm are localized, selected and targeted for drug release, having a great potential in response to external-stimulus such as temperatures from 35 to 39°C. The critical micellization concentration (cmc) of PNVP-b-PNIPAM in aqueous solution is 0.0026 wt% determined by turbidity measurement. The size of micelles determined by DLS increased from 163 to 329 nm with increasing concentration of PNVP-b-PNIPAM from 0.25 to 0.5 wt% in aqueous solution at 40°C, which is determined by DLS.     

Synthesis and Characterization of Silicone Modified Polyurethane Surfactant Useable at High Temperature

A series of novel silicone modified polyurethane (Si-PU) surfactants were successfully synthesized by using hydroxypropyl-terminated polydimethylsiloxane (HPMS), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and isophoronediisocyanate (IPDI). The chemical structure of the surfactant was confirmed by FTIR and ¹H-NMR. TEM photographs showed that the micelles of the Si-PU surfactants dispersed in aqueous solution were spherical with the particle size in the range of 100–400 nm. Surface tension measurements indicated that these surfactants had low surface tension to 29.9 mN·m^?1and a definite critical micelle concentration to, approximately 5.0×10^?4–7.5×10^?4mol·L^?1. When the content of HPMS was 20 wt%, the surfactant's, emulsifying performance was superior to the traditionally available Span80/Tween80 mixed emulsifiers. In addition to that, no phase transition temperature was detected from 20°C to 90°C by fluorescence probe and DSC measurements, confirming the high thermal stability of the micelles.     

The Effects of Salts and Ionic Surfactants on the Micellar Structure of Tri‐Block Copolymer PEO‐PPO‐PEO in Aqueous Solution

The micelles of two poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) block copolymers, P123 and F127 (same mol wt of PPO but different % PEO) in aqueous solution in the absence and presence of salts as well as ionic surfactants were mainly examined by dynamic light scattering (DLS). The study is further supported by cloud point and viscosity measurements. The change in cloud point (CP), as well as the size of micelles in aqueous solution in presence of salts obeys the Hofmeister lyotropic series. Addition of both cationic cetylpyridinium chloride (CPC) and anionic sodium dodecylsulfate (SDS) surfactants in the aqueous solution of P123 show initial decrease of micellar size from 20 nm to nearly 7 nm and then increasing with a double relaxation mode, further in the presence of NaCl this double relaxation mode vanishes. The effect of surfactant on F127, which has much bigger hydrophilic part is different than P123 and have no double relaxation. The relaxation time distributions is obtained using the Laplace inversion routine REPES. Two relaxation modes for P123 are explained on the bases of Pluronic rich mixed micelles containing ionic surfactants and the other smaller, predominantly surfactant rich micelles domains.     

Synthesis,thermo-responsive micellization and caffeine drug release of novel PBMA-<Emphasis Type="Italic">b</Emphasis>-PNIPAAm block polymer brushes

Brush-like block copolymers with poly(t-butyl methacrylate) (PBMA) and poly(N-isopropylacrylamide) (PNIPAAm) as side arms, PBMA-b-PNIPAAm, were designed and synthesized via a simple free radical polymerization route. The chemical structure and molecular weight of these polymer brushes were characterized and determined by nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectrometry (FTIR) and gel permeation chromatography (GPC). The micellar formation by these polymer brushes in aqueous solutions were detected by a surface tension technique, and the critical micelle concentration (CMC) ranged from 1.53 to 8.06 mg L⁻¹. The morphology and geometry of polymer micelles were investigated by transmission electron microscope (TEM) and dynamic light scattering (DLS). The polymer micelles assume the regularly-spherical core-shell structure with well-dispersed individual nanoparticles, and the particle size was in the range from 36 to 93 nm. The PNIPAAm segments exhibited a thermoreversible phase transition, so the resulting block polymer brushes were temperature-sensitive and the low critical solution temperature (LCST) was determined by UV-vis spectrometer at about 28.82–29.40°C. The characteristic parameters of the polymer micelles such as CMC, micellar size and LCST values were affected by their compositional ratios and the length of hydrophilic or hydrophobic chains. The evaluation for caffeine drug release behavior of the block polymer micelles demonstrated that the self-assembled micelles exhibited thermal-triggered properties in controlled drug release.     

Facile fabrication of thermally responsive Pluronic F127-based nanocapsules for controlled release of doxorubicin hydrochloride

Novel core–shell-structured Pluronic-based nanocapsules with thermally responsive properties were successfully prepared using a modified emulsification/solvent evaporation method. The nanocapsules were constructed through the cross-linking reaction between p-nitrophenyl-activated Pluronic F127 and hyaluronic acid (HA) (named Pluronic F127/HA) or poly(ε-lysine) (PL) (named Pluronic F127/PL) at the organic/aqueous interface. The formation, size, and thermal responsiveness of the nanocapsules were characterized by ¹H NMR, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The resultant shell-cross-linked nanocapsules exhibit a larger volume transformation (26 times change in volume for Pluronic F127/HA and 31 times for Pluronic F127/PL) over a temperature range of 4–37 °C because of the temperature-dependent dehydration of cross-linked Pluronic F127 polymer chains. The nanocapsules are about 72?±?4 nm (polydispersity index [PDI]?=?0.08) for Pluronic F127/PL (69?±?5 nm, PDI?=?0.10 for Pluronic F127/HA) at 37 °C with narrow size distribution and expand to about 226?±?23 nm (PDI?=?0.34) for Pluronic F127/PL (206?±?20 nm, PDI?=?0.3) for Pluronic F127/HA at 4 °C with broad size distribution in aqueous solutions. The nanocapsules were used to encapsulate and control the release of doxorubicin hydrochloride (DOX·HCl) in aqueous solution. DOX·HCl was physically encapsulated in the nanocapsules using a soaking–freeze-drying–heating procedure. The release curve and release kinetics disclosed that the thermally responsive hollow nanocapsules are good carries for drug delivery.