由脂肪族二酰胺二醇合成聚酯酰胺及表征

利用脂肪族二元酸酯与乙醇胺反应容易获得的对称二酰胺二醇,经缩聚合成聚酯酰胺预聚体,并针对端羧基和端羟基同时扩链来提高分子量,获得可生物降解的聚酯酰胺.首先将N,N′-二(2-羟乙基)草酰胺(HEOA)或N,N′-二(2-羟乙基)己二酰胺(HEHA)与己二酸和丁二醇缩聚,制备同时带有端羧基及端羟基的脂肪族聚酯酰胺预聚体,通过1,4-双(2-噁唑啉)苯及己二酰双己内酰胺混合扩链剂扩链,获得高分子量脂肪族聚酯酰胺,并通过红外、1H-NMR、DSC及TGA对其结构和热性能进行了表征.结果表明,预聚体在制备过程发生了一定的酯-酰胺交换反应;扩链后聚合物的熔点、熔融焓和热稳定性有所下降;但热稳定性仍接近或略高于聚己二酸丁二酯.     

长链脂肪族二元酸的合成及其在缩聚反应中的应用

长链脂肪族二元酸一般是指含有10个或以上碳原子的饱和直链二元酸,其两端带有羧基官能团,可用于合成香料、特种尼龙工程塑料、热熔胶、涂料、增塑剂、高级润滑油等众多化工产品;由于其链段中含有长烷烃链段,具有优于短链二元酸的性质,使得相应的合成材料具有优越的性能,因此广泛应用于化工、轻工、国防、汽车工业、工程材料等领域;同时,还可用于开发新的聚合物产品。长链脂肪族二元酸在自然界中不单独存在,目前工业上主要通过化学合成法和生物发酵法生产。本文主要对长链脂肪族二元酸的合成方法进行综述,包括传统有机合成、生物技术转化、烯烃复分解、异构化-氢氧羰基化及聚乙烯端基功能化等,并简要概述长链脂肪族二元酸在缩聚反应(聚酯和聚酰胺)中的应用。最后,对合成方法待解决的问题进行了总结,并对未来发展方向进行了展望。     

尿素催化醇解合成长碳链脂肪族碳酸二酯

氧化锌;尿素催化醇解合成长碳链脂肪族碳酸二酯     

聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

脂肪族聚酯及共聚酯的生物降解性研究

以酯交换法或直接缩聚法合成了一系列脂肪族聚酯，经二异氰酸酯(HDI)扩链得到含氨酯键的聚酯及共聚酯，用DSC、X射线衍射等分析表征了聚酯及共聚物的结构和性能。用土埋试验、CO2释放试验和黑曲霉降解试验着重研究了这些聚合物的生物降解性，详细讨论了聚酯结构、组成及聚酯分子量对生物降解性的影响。     

癸二酸己二醇酯/己二酸二醇酯共聚物的合成及热性能

脂肪族聚酯被认为是完全生物降解材料,是传统塑料理想的替代品[1～4]。目前,已商业化的聚酯材料主要通过微生物合成,或由开环反应制得[1]。由于生产规模小,单体选择范围小,应用受到限制。由二元酸和二元醇直接缩合制备满足性能要求的高分子聚脂,受到反应热力学的限制而难以工业化[5,6]。本文用溶液聚合方法制备了高分子量聚己二酸己二醇酯(PHA)和聚癸二酸己二醇酯(PHSe),这2种聚酯均具有较高的拉伸强度和延伸率。将它们共聚不仅有可能提高其生物降解速度,也有可能进一步提高其延伸率。该合成方法勿需高温、高真空,所用溶剂(十氢萘)无毒、…     

链段相容性对聚酯-聚醚多嵌段共聚物组成均一性的影响

<正> 由结晶型芳族聚酯为硬链段,无定型脂肪族聚醚为软链段的聚酯-聚醚多嵌段共聚物,是一类性能优良的热塑弹性体,本文研究链段相容性对这类聚合物组成均一性的影响,因此,合成了一系列不同链段结构的聚酯-聚醚多嵌段共聚物。 如硬链为聚对苯二甲酸乙二醇酯(PET)和丁二醇酯(PBT);软链段有聚乙二醇醚(PET)、聚丁二醇醚(PTMG)、聚二醇醚(PPG)和四氢呋喃同环氧丙烷的共聚醚二醇     

生物降解高分子材料聚丁二酸丁二醇酯的改性研究进展

生物降解高分子材料被公认为是聚丙烯、聚乙烯等传统高分子材料造成"白色污染"的问题的重要解决方法之一。聚丁二酸丁二醇酯是重要的可生物降解的脂肪族聚酯之一,因与传统的聚丙烯、聚乙烯高分子材料具有相近的物理和力学性能,从而引起科学与工业界的广泛重视。然而,与大多数脂肪族聚酯一样,PBS材料也存在着加工、种类少、性能应用上的缺点。因此,对其通过改性拓宽用途范围的研究报道也随之增多。本文从化学、物理等改性的手段方法为着眼点,分类阐述了近些年来生物降解高分子材料聚丁二酸丁二醇酯改性研究现状与进展。     

聚酯酸酐的合成及其药物释放性能研究

将对羟乙氧基苯甲酸分别与己二酰氯、癸二酰氯和对苯二甲酰氯反应，制备了含酯键的二羧酸．经熔融缩聚，合成了主链含酯键的新型聚酯酸酐．通过１ＨＮＭＲ、ＩＲ及元素分析对单体及聚酯酸酐的结构进行了表征．研究了聚酯酸酐的体外降解和药物释放性能，其降解速率和释药速率次序为：聚４，４′－（己二酰氧二乙氧基）双对苯二甲酸＞聚４，４′－（癸二酰氧二乙氧基）双对苯二甲酸＞聚４，４′－（对苯二甲酰氧二乙氧基）双对苯二甲酸．     

乙交酯/丙交酯/己内酯三元共聚物的合成及表征

生物降解性高分子具有在生理条件下可以自行降解、最终被降解为单体或成为二氧化碳和水,从而或被机体吸收、或通过代谢途径排出体外的特性,已被广泛用作药物释放体系的载体、手术缝合线、外科手术及组织修复材料等各个方面,是当前生物医用高分子的一个重要分支．脂肪族聚酯由于具有良好生物相容性而成为最引人注意和有发展前途的一类生物降解性高分子,其中聚乙交酯（ＰＧＡ）、聚丙交酯（ＰＬＡ）及丙交酯／乙交酯共聚物（ＰＬＧＡ）是这一类聚酯中应用最为广泛的几种．Ｍｉｌｌｅｒ等［１］研究发现乙交酯（ＧＡ）和丙交酯（ＬＡ）共聚…     

Crystallization Kinetics of Polypropylene and Poly (butyl methacrylate-co-hydroxyethyl methacrylate) Blend

The crystallization kinetics of polypropylene and poly (butyl methacrylate-co-hydroxyethyl methacrylate) blend was investigated with differential scanning calorimetry. The isothermal crystallization analysis based on the Avrami theory indicated a heterogeneous nucleating effect from the copolymer. A systematic study of the nonisothermal crystallization kinetics was undertaken using the Avrami equation and its later modifications by Ozawa, Mo, and Zhang. The results demonstrated that the linear relationship failed in the different cooling rates because the Avrami method did not take into account that the crystallization temperature was lowered continuously. The Ozawa and Mo methods could be successful in describing the overall nonisothermal process of polypropylene and the blend. In addition, the nonisothermal crystallization energy values were estimated by the Kissinger and Freidman models. There are two mutually opposite effects on the crystallization behavior of the blend: nucleation ability and growth retardation.     

Influence of graphene nanosheets on stereocomplex crystallization behaviors of star‐shaped poly (D(L)‐lactide) stereoblock copolymer

The nanocompsites of star‐shaped poly(D‐lactide)‐co‐poly(L‐lactide) stereoblock copolymers (s‐PDLA‐PLLA) with two‐dimensional graphene nanosheets (GNSs) were prepared by solution mixing method. Crystallization behaviors were investigated using differential scanning calorimetry, polarized optical microscopy, and wide angle X‐ray diffraction. The results of isothermal crystallization behaviors of the nanocompsites clearly indicated that the GNS could remarkably accelerate the overall crystallization rate of s‐PDLA‐PLLA copolymer. Unique stereocomplex crystallites with melting temperature about 207.0°C formed in isothermal crystallization for all samples. The crystallization temperatures of s‐PDLA‐PLLAs shifted to higher temperatures, and the crystallization peak shapes became sharper with increasing GNS contents. The maximum crystallization temperature of the sample with 3 wt% GNS was about 128.2°C, ie, 15°C higher than pure s‐PDLA‐PLLA. At isothermal crystallization processes, the halftime of crystallization (t_0.5) of the sample with 3 wt% GNS decreased to 6.4 minutes from 12.9 minutes of pure s‐PDLA‐PLLA at 160°C.The Avrami exponent n values for the nanocomposites samples were 2.6 to 3.0 indicating the crystallization mechanism with three‐dimensional heterogeneous nucleation and spherulites growth. The morphology and average diameter of spherulites of s‐PDLA‐PLLA with various GNS contents were observed in isothermal crystallization processes by polarized optical microscopy. Spherulite growth rates of samples were evaluated by using combined isothermal and nonisothermal procedures and analyzed by the secondary nucleation theory. The results evidenced that the GNS has acceleration effects on the crystallization of s‐PDLA‐PLLA with good nucleation ability in the s‐PDLA‐PLLA material.     

Crystallization kinetics and morphology of biodegradable poly(butylene succinate‐co‐propylene succinate)s

The crystallization behavior of biodegradable poly(butylene succinate) and copolyesters poly(butylene succinate‐co‐propylene succinate)s (PBSPS) was investigated by using ¹H NMR, DSC and POM, respectively. Isothermal crystallization kinetics of the polyesters has been analyzed by the Avrami equation. The 2.2‐2.8 range of Avrami exponential n indicated that the crystallization mechanism was a heterogeneous nucleation with spherical growth geometry in the crystallization process of polyesters. Multiple melting peaks were observed during heating process after isothermal crystallization, and it could be explained by the melting and recrystallization model. PBSPS was identified to have the same crystal structure with that of PBS by using wide‐angle X‐ray diffraction (WAXD), suggesting that only BS unit crystallized while the PS unit was in an amorphous state. The crystal structure of polyesters was not affected by the crystallization temperatures, too. Besides the normal extinction crosses under the POM, the double‐banded extinction patterns with periodic distance along the radial direction were also observed in the spherulites of PBS and PBSPS. The morphology of spherulites strongly depended on the crystallization temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 420–428, 2007     

PEEK-PEDEK嵌段共聚物非等温结晶动力学研究

PEEK以其优异的热稳定性和耐溶剂性被广泛应用在航空航天和电子电气等领域[1].经过增强后的PEEK长期使用温度(UL温度指数)可达523 K.但在温度高于523 K的情况下,模量下降较快,这在一定程度上限制了其应用.在PEEK的分子链上引入刚性较强地联苯基团,可以有效的提高分子链的刚性,使聚合物的玻璃化转变温度得以提高[2,3].我们曾合成了一系列含有刚性单体联苯二酚的嵌段共聚物,并对其热性能进行了研究[4],本文着重对这一系列共聚物的非等温结晶动力学进行研究.     

Crystallization kinetics and morphology of poly(butylene succinate‐co‐adipate)

The crystallization kinetics of biodegradable poly(butylene succinate‐co‐adipate) (PBS/A) copolyester was investigated by using differential scanning calorimetry (DSC) and polarized optical microscopy (POM), respectively. The Avrami and Ozawa equations were used to analyze the isothermal and nonisothermal crystallization kinetics, respectively. By using wide‐angle X‐ray diffraction (WAXD), PBS/A was identified to have the same crystal structure with that of PBS. The spherulitic growth rates of PBS/A measured in isothermal conditions are very well comparable with those measured by nonisothermal procedures (cooling rates ranged from 0.5 to 15 °C/min). The kinetic data were examined with the Hoffman–Lauritzen nucleation theory. The observed spherulites of PBS/A with different shapes and textures strongly depend on the crystallization temperatures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3231–3241, 2005     

聚丙烯-g-聚氨酯共聚物的非等温结晶动力学研究

用DSC法研究了聚丙烯 (PP)和聚丙烯接枝聚氨酯的共聚物 (PP g PU)在不同冷却速率下的非等温结晶动力学 .用Avrami方程和莫志深改进法对DSC测定结果进行了处理 ,结果表明 ,PP g PU的动力学参数能很好的符合Avrami方程和莫志深改进方程 .PP接枝了聚氨酯支链后 ,结晶速率增大 ,球晶的生长和成核机制也相应发生改变 ,而其变化规律与接枝物的组成和结构密切相关     

磺化间规聚苯乙烯和间规聚苯乙烯的非等温结晶动力学

对磺化度分别为 1 6 0mol% ,3 0 5mol% ,4 41mol%的磺化间规聚苯乙烯和间规聚苯乙烯的非等温结晶动力学进行了研究 ,用DSC测试了四种样品的非等温结晶过程 ,对所得数据分别用Mandelkern方法和莫志深方法进行了处理 ,发现磺化间规聚苯乙烯和间规聚苯乙烯的非等温结晶动力学参数差别较大 ,说明磺酸基团的引入对sPS结晶行为有较大的影响 ,磺酸基团之间的氢键相互作用使SsPS的结晶速率降低 ,结晶度减小 .此外 ,SsPS和sPS的Avrami指数n值均在 2～ 3之间 ,且为非整数 ,说明它们主要是以混合成核的方式结晶 .SsPS的成核与生长活化能ΔE值高于sPS的 ,并且随磺化度的增加而递增 ,sPS的ΔE值为 2 40 5 0kJ/mol,磺化度为 1 6 0mol% ,3 0 5mol%和 4 41mol%的SsPS的ΔE值分别为 2 5 1 70kJ/mol,2 72 33kJ/mol和2 90 79kJ/mol.     

Crystallization and morphology of poly(vinylidene fluoride)/poly(3‐hydroxybutyrate) blends. III. Crystallization and phase diagram by differential scanning calorimetry

The crystallization of poly(vinylidene fluoride) (PVDF)/poly(3‐hydroxybutyrate) (PHB) blends was studied with differential scanning calorimetry, from which the phase diagram was derived. Strong miscibility was underlined by the large negative Flory–Huggins interaction parameter (?0.25). The crystallization of the blend components differed remarkably. Whereas PVDF always crystallized in the surroundings of a homogeneous melt, PHB crystallized in a volume that was confined by the already existing PVDF spherulites, partly in their surroundings and partly inside. Under isothermal conditions, PVDF usually crystallized regularly in three dimensions with predominant quench‐induced athermal nucleation. The Avrami exponent for PVDF dendritic spherulitic growth was, however, distinctly smaller than that for compact growth, and this revealed the two‐dimensional lamellar growth inside. This deviation from ideal Avrami behavior was caused by the development of compositional inhomogeneities as PVDF crystallization proceeded, and this decelerated the kinetics. PHB crystallized three‐dimensionally with mixed thermal and athermal nucleation outside the PVDF spherulites. Inside the PVDF spherulites, PHB crystallization proceeded in a fibrillar fashion with thermal nucleation; the growth front followed the amorphous paths inside the dendritic PVDF spherulites. The crystallization was faster than that in the melt of uncrystallized PVDF. Solid PVDF acts possibly heterogeneously nucleating, accelerating PHB crystallization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 287–295, 2005     

Free poly(l‐lactic acid) spherulites grown from thermally induced phase separation and crystallization kinetics

Free poly(L‐lactic acid) (PLLA) sheaves and spherulites were prepared by thermally induced phase separation method from its tetrahydrofuran solution without the assistance of other additives. The effects of variables such as polymer concentration, quenching temperature and time on the morphology of PLLA spherulites were studied. The morphology, size, degree of crystallinity, and crystal structure of spherulites were characterized by SEM, DSC and XRD, and so forth. No obvious sheaves or spherulites were observed at quenching temperature of 8 and 0 °C, whereas sheaves composed of fluffy nanofibers with diameter of about 250 nm were formed at quenching temperature range of ?10 to ?40 °C. With increasing quenching time, the PLLA morphology changed from small sheaves to big sheaves (cauliflower‐like) to spherulites. Low concentration (3 and 5 wt %) solutions were favorable for the formation of sheaves, whereas high concentration (7 wt %) solution as good for the formation of spherulites. The mechanism for the formation of PLLA sheaves or spherulites was examined by the isothermal and nonisothermal crystallization of PLLA/tetrahydrofuran solutions using DSC. The Avrami equation was used to analyze the data and good linear double‐logarithmic plots were obtained. The Avrami exponent n and rate constant K indicated the crystal growth mechanism was intermediate between completely instantaneous and completely sporadic types of nucleation and growth, and the spherulites were there dimensional. Compared to the spherulites embedded in the bulky film obtained from the melt processing, this study provided a feasible technique for the fabrication of free PLLA spherulites. The PLLA spherulites composed of fluffy nanofibers with a high porosity (≥90%) may be potentially applied as functional materials such as catalyst support, adsorption and biomedical materials, and so forth. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1476–1489