Water diffusion in polyethylene modified by ion irradiation

Water diffusion in polyethylene (PE) modified by irradiation with 40keV Ar⁺ ions to fluences of 1 × l0¹² to 1 × l0¹⁵cm⁻² was studied. The diffusion experiments were performed in a temperature interval from 25 to 100 °C and for diffusion times of up to 3 h. The water incorporated was detected by infra-red spectroscopy, microgravimetry and by measuring contact angles. Maximum water uptake observed for the ion fluence of 1 × 10¹³cm⁻² may be connected with an increase in free volume fraction and oxidative processes in the PE surface layer modified by ion irradiation. For higher ion fluences, the available free volume is reduced owing to carbonization and crosslinking of the polymer and, accordingly, the water content decreases. The water incorporated in PE is mostly in the form of isolated molecules. At elevated temperature rediffusion of water is observed.     

New aspects of the reaction of silver(I) cations with the ethylenediaminetetraacetate ion

The highly neutralized ethylenediaminetetraacetate (EDTA) titrant (95–99% as Y⁴⁻ anion) precipitates with Ag⁺ cations to form the Ag₄Y species, in aqueous medium, which is well characterized from conductometric titration, thermal analysis and potentiometric titration of the silver content of the solid. The precipitate dissolves in excess Y⁴⁻ to form a complex, AgY³⁻. Equilibrium studies at 25°C and ionic strength 0.50 M (NaNO₃) have shown from solubility and potentiometric measurements that the formation constant (95% confidence level) β₁ = (1.93 ± 0.07) × 10⁵ M⁻¹ and the solubility products are K_S0 = [Ag +]⁴[Y⁴⁻] = (9.0 ± 0.4) × 10⁻¹⁸ M⁵ and K_S1 = [Ag +]³[AgY³⁻] = (1.74 ± 0.08) × 10⁻¹² M⁴. The presence of Na⁺, rather than ionic strength, markedly affects the equilibrium; the data at ionic strength 0.10 M are: β₁ = (1.19 ± 0.03) × 10⁶ M⁻¹, K_S0 = (1.6 ± 0.4) × 10⁻¹⁹ M⁵ and K_S1 = (1.9 ± 0.5) × 10⁻¹³ M⁴; at ionic strength tending to zero; β₁ = (1.82 ± 0.05) × 10⁷ M⁻¹, K_S0 = (2.6 ± 0.8) × 10⁻²² M⁵ and K_S1 = (5 ± 1) × 10⁻¹⁵ M⁴. The intrinsic solubility is 2.03 mM silver (I) in 0.50 M NaNO₃. Well-defined potentiometric titration curves can be taken in the range 1–2 mM with the Ag indicator electrode. Thermal analysis revealed from differential scanning calorimetry a sharp exothermic peak at 142°C; thermal gravimetry/differential thermal gravimetry has shown mass loss due to silver formation and a brown residue, a water-soluble polymeric acid (decomposition range 135–157°C), tending to pure silver at 600°C, consistent with the original Ag₄Y salt.     

Acidity constants of benzidine in aqueous solutions

The acidity constants of benzidine (Bz) in aqueous solutions determined potentiometrically at 25° were K_a1 = (1.11 ± 0.08) × 10⁻⁵, K_a2 = (1.45 ± 0.12) × 10⁻⁴. The apparent mixed constants in 0.1M sodium nitrate are K_a1 = (5.37 ± 0.28) × 10⁻⁶ and K_a2 = (1.14 ± 0.09) × 10⁻⁴. The ultraviolet spectra were recorded as a function of pH and analysed with these constants to obtain the absorption spectra of H₂Bz²⁺, HBz⁺ and Bz; the corresponding wavelengths of maximal absorption are 247, 273 and 278 nm, and molar absorptivities 1.63 × 10⁴, 1.76 × 10⁴ and 2.26 × 10⁴ 1.mole⁻¹.cm⁻¹.     

Collisional quenching of electronically excited germanium atoms, Ge[4p(S0)], by small molecules investigated by time-resolved atomic resonance absorption spectroscopy

The collisional quenching of electronically excited germanium atoms, Ge[4p²(¹S₀)], 2.029 eV above the 4p²(³P₀) ground state, has been investigated by time-resolved atomic resonance absorption spectroscopy in the ultraviolet at λ = 274.04 nm [4d(¹P₁⁰) ← 4p²(¹S₀)]. In contrast to previous investigations using the ‘single-shot mode’ at high energy, Ge(¹S₀) has been generated by the repetitive pulsed irradiation of Ge(CH₃)₄ in the presence of excess helium gas and added gases in a slow flow system, kinetically equivalent to a static system. This technique was originally developed for the study of Ge[4p²(¹D₂)] which had eluded direct quantitative kinetic study until recently. Absolute second-order rate constants obtained using signal averaging techniques from data capture of total digitised atomic decay profiles are reported for the removal of Ge(¹S₀) with the following gases (k_R in cm³ molecule⁻¹ s⁻¹, 300 K): Xe, 7.1 ± 0.4 × 10⁻¹³; N₂, 4.7 ± 0.6 × 10⁻¹²; O₂, 3.6 ± 0.9 × 10⁻¹¹; NO, 1.5 ± 0.3 × 10⁻¹¹; CO, 3.4 ± 0.5 × 10⁻¹²; N₂O, 4.5 ± 0.5 × 10⁻¹²; CO₂, 1.1 ± 0.3 × 10⁻¹¹; CH₄, 1.7 ± 0.2 × 10⁻¹¹; CF₄, 4.8 ± 0.3 × 10⁻¹²; SF₆, 9.5 ± 1.0 × 10⁻¹³; C₂H₄, 3.3 ± 0.1 × 10⁻¹⁰; C₂H₂, 2.9 ± 0.2 × 10⁻¹⁰; Ge(CH₃)₄, 5.4 ± 0.2 × 10⁻¹¹. The results are compared with previous data for Ge(¹S₀) derived in the single-shot mode where there is general agreement though with some exceptions which are discussed. The present data are also compared with analogous quenching rate data for the collisional removal of the lower lying Ge[4p²(¹D₂)] state (0.883 eV), also characterized by signal averaging methods similar to that described here.     

Temperature dependence of the rate constant for reactions of hydrated electrons with H, OH and H2O2

The temperature dependence of the rate constants, for the reactions of hydrated electrons with H atoms, OH radicals and H₂O₂ has been determined. The reaction with H atoms, studied in the temperature range 20–250°C gives k(20°C) = 2.4 × 10¹⁰M^-1s¹ and the activation energy E_A = 14.0 kJ mol^-1 (3.3 kcal mol^-1). For reaction with OH radicals the corresponding values are, k(20°C) = 3.1 × 10¹⁰M^-1s^-1 and E_A = 14.7 kJ mol^-1 (3.5 kcal mol^-1) determined in the temperature range 5–175°C. For reaction with H₂O₂ the values are, k(20°C) = 1.2 × 10¹⁰M^-1s^-1 and E_A = 15.6 kJ mol^-1 (3.7 kcal mol^-1) measured from 5–150°C. Thus, the activation energy for all three fast reactions is close to that expected for diffusion controlled reactions. As phosphates were used as buffer system, the rate constant and activation energy for the reaction of hydrated electron with H₂PO₄^- was determined to k(20°C) = 1.5 × 10⁷M^-1s^-1 and E_A = 7.4 kJ mol^-1 (1.8 kcal mol^-1) in the temperature range 20–200°C.     

Kinetics of the autoxidation of vitamin A catalysed by cobalt ion

Vitamin A,dissolved in liquid paraffin, is stable below room temperature, but suffers oxidative decomposition at 80°, giving its epoxide as the main product. The rate of decomposition of vitamin A (V_A) at 80° in the presence of oxygen (partial pressure of p) and a small amount of cobaltous stearate (Co) is expressed as: d[V_A]/dt = 3·15 × 10⁻¹:[V_A][Co] p^1·48 + 1·51 × 10⁻⁵[V_A]p^0·33 + 0·33 × 10⁻⁵[V_A], where the last term represents the spontaneous thermal decomposition.     

Far-UV laser flash photolysis in solution. A study of the chemistry of 1,1-dimethylsilene in hydrocarbon solvents

The far-UV (193 nm) laser flash photolysis of nitrogen-saturated isooctane solutions of 1,1-dimethylsiletane allows the direct detection of 1,1-dimethylsilene as a transient species, which (at low laser intensities) decays with pseudo-first-order kinetics (τ 10 μs) and exhibits a UV absorption spectrum with λ_max 255 nm. Characteristic rapid quenching is observed for the silene with methanol (k_McOH = (4.9 ± 0.2) × 10⁹ M⁻¹ s⁻¹), tert-butanol (k_BuOH = (1.8 ± 0.1) × 10⁹ M⁻¹ s⁻¹) and oxygen (k_O2 = (2.0 ± 0.5) × 10⁸ M⁻¹ s⁻¹). The Arrhenius activation parameters for the reaction with methanol have been determined to be E_a = −2.6 ± 0.6 kcal mol⁻¹ and log A = 7.7 ± 0.3.     

TEMPO-initiated oxidation of 2-aminophenol to 2-aminophenoxazin-3-one

The oxidation reaction of 2-aminophenol (OAP) to 2-aminophenoxazin-3-one (APX) initiated by 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) has been investigated in methanol at ambient temperature. The oxidation of OAP was followed by electronic spectroscopy and the rate constants were determined according to the rate law −d[OAP]/dt=k_obs[OAP][TEMPO]. The rate constant, activation enthalpy and entropy at 298 K are as follows: k_obs (dm³ mol⁻¹ s⁻¹)=(1.49±0.02)×10⁻⁴, E_a=18±5 kJ mol⁻¹, ΔH^‡=15±4 kJ mol⁻¹, ΔS^‡=−82±17 J mol⁻¹ K⁻¹. The results of oxidation of OAP show that the formation of 2-aminophenoxyl radical is the key step in the activation process of the substrate.     

Kinetic study of gas-phase Lu(D3/2) with O2, N2O and CO2

The second-order rate constants of gas-phase Lu(²D_3/2) with O₂, N₂O and CO₂ from 348 to 573 K are reported. In all cases, the reactions are relatively fast with small barriers. The disappearance rates are independent of total pressure indicating bimolecular abstraction processes. The bimolecular rate constants (in molecule⁻¹ cm³ s⁻¹) are described in Arrhenius form by k(O₂)=(2.3±0.4)×10⁻¹⁰exp(−3.1±0.7 kJmol⁻¹/RT), k(N₂O)=(2.2±0.4)×10⁻¹⁰exp(−7.1±0.8 kJmol⁻¹/RT), k(CO₂)=(2.0±0.6)×10⁻¹⁰exp(−7.6±1.3 kJmol⁻¹/RT), where the uncertainties are ±2σ.     

Calorimetric study on oxidation of alumina supported rhodium by dioxygen

Rhodium particles in nanometer size were prepared by impregnating alumina powders with aqueous solutions containing rhodium salts. The dispersion (D) of rhodium crystallites on the prepared samples was estimated by dioxygen adsorption measured at 300 K. Phenomena of oxidizing the supported crystallites with 2.5 × 10⁴ Pa O₂ in a temperature range between 280 and 870 K were calorimetrically studied. Extent of oxidation may be distinguished into three stages, i.e., adsorption on surface (T < 300 K), progressive penetration into bulk, and formation of a stable bulk oxide (T> 700 K), on raising the oxidation temperature. Heat of dioxygen adsorption varies only slightly with the dispersion (D) of rhodium and has a value of 294 ± 6 kJ (mol O₂)⁻¹. Chemical stoichiometry of the bulk oxide formed, however, varies with the dispersion of rhodium crystallites. A dioxide (RhO₂) (_f H = 225 ± 3 kJ (mol O₂)⁻¹) and a sesquioxide (Rh₂O₃) (_f H = 273 ± 3 kJ (mol O₂)⁻¹) was formed at D < 60% and D> 80%,     

One-electron oxidation of mitomycin C and its corresponding peroxyl radicals. A steady-state and pulse radiolysis study

The one-electron oxidation of Mitomycin C (MMC) as well as the formation of the corresponding peroxyl radicals were investigated by both steady-state and pulse radiolysis. The steady-state MMC-radiolysis by OH-attack followed at both absorption bands showed different yields: at 218 nm G_i (-MMC) = 3.0 and at 364 nm G_i (-MMC) = 3.9, indicating the formation of various not yet identified products, among which ammonia was determined, G(NH₃) = 0.81. By means of pulse radiolysis it was established a total κ (OH + MMC) = (5.8 ± 0.2) × 10⁹ dm³ mol⁻¹ s⁻¹. The transient absorption spectrum from the one-electron oxidized MMC showed absorption maxima at 295 nm (ε = 9950 dm³ mol⁻¹ cm^t-1), 410 nm (ε = 1450 dm³ mol⁻¹ cm⁻¹) and 505 nm ( ε = 5420 dm³ mol⁻¹ cm⁻¹). At 280–320 and 505 nm and above they exhibit in the first 150 μs a first order decay, κ₁ = (0.85 ± 0.1) × 10³ s⁻¹, and followed upto ms time range, by a second order decay, 2κ = (1.3 ± 0.3) × 10⁸ dm³ mol^-1 s⁻¹. Around 410 nm the kinetics are rather mixed and could not be resolved.

The steady-state MMC-radiolysis in the presence of oxygen featured a proportionality towards the absorbed dose for both MMC-absorption bands, resulting in a G_i (-MMC) = 1.5. Among several products ammonia-yield was determined G(NH₃) = 0.52. The formation of MMC-peroxyl radicals was studied by pulse radiolysis, likewise in neutral aqueous solution, but saturated with a gas mixture of 80% N₂O and 20% O₂. The maxima of the observed transient spectrum are slightly shifted compared to that of the one-electron oxidized MMC-species, namely: 290 nm (ε = 10100 dm³ mol⁻¹ cm⁻¹), 410 nm (ε = 2900 dm³ mol⁻¹ cm⁻¹) and 520 nm (ε = 5500 dm³ mol⁻¹ cm⁻¹). The O₂-addition to the MMC-one-electron oxidized transients was found to be at 290 to 410 nm gk(MMC·OH + O₂) = 5 × 10⁷ dm³ mol⁻¹ s⁻¹, around 480 nm κ = 1.6 × 10⁸ dm³ mol⁻¹ s⁻¹ and at 510 nm and above, κ = 3 × 10⁸ dm³ mol⁻¹ s⁻¹. The decay kinetics of the MMC-peroxyl radicals were also found to be different at the various absorption bands, but predominantly of first order; at 290–420 nm κ₁ = 1.5 × 10³ s⁻¹ and at 500 nm and above, κ = 7.0 × 10³ s⁻¹.

The presented results are of interest for the radiation behaviour of MMC as well as for its application as an antitumor drug in the combined radiation-chemotherapy of patients.     

Time-resolved vibrational cemiluminescence: Rate constants for the reaction F + HC1 → HF + Cl and for the relaxtion of HF(v = 3) by HCl, CO2, N2O, CO, N2 and O2

The reaction: F + HCl→ HF (v 3) + Cl (1), has been initiated by photolysing F₂ using the fourth-harmonic output at 266 nm from a repetitively pulsed Nd: YAG laser By analysing the time-dependence of the HF(3,0) vibrational chemiluminescence, rate constants have been determined at (296 ± 5) K for reaction (1), k₁ = (7.0 ± 0.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹, and for the relaxation of HF(v = 3) by HCl, CO₂, N₂O, CO, N₂ and O₂: k_HCl = (1.18 ±0.14) × 10⁻¹¹ k_CO2 = (1.04 ± 0. 13) × 10⁻¹², k_N2O = (1.41 ± 0.13) × 10⁻¹¹ k_CO = (2.9 ± 0.3) × (10⁻¹², k_N2 = (7.1 ± 0.6) × 10⁻¹⁴ and k_O2 = (1.9 ± 0.6) × 10⁻¹⁴ cm³molecule⁻¹s⁻¹.     

On the conformational stability and dimerization of phosphotransferase enzyme I from Escherichia coli

The activity of enzyme I (EI), the first protein in the bacterial PEP:sugar phosphotransferase system, is regulated by a monomer–dimer equilibrium where a Mg²⁺-dependent autophosphorylation by PEP requires the homodimer. Using inactive EI(H189A), in which alanine is substituted for the active-site His189, substrate binding effects can be separated from those of phosphorylation. Whereas 1 mM PEP (with 2 mM Mg²⁺) strongly promotes dimerization of EI(H189A) at pH 7.5 and 20 °C, 5 mM pyruvate (with 2 mM Mg²⁺) has the opposite effect. A correlation between the coupling of N- and C-terminal domain unfolding, measured by differential scanning calorimetry, and the dimerization constant for EI, determined by sedimentation equilibrium, is observed. That is, when the coupling between N- and C-terminal domain unfolding produced by 0.2 or 1.0 mM PEP and 2 mM Mg²⁺ is inhibited by 5 mM pyruvate, the dimerization constant for EI(H189A) decreases from >10⁸ to <5 × 10⁵ or 3 × 10⁷ M⁻¹, respectively. With 2 mM Mg²⁺ at 15–25 °C and pH 7.5, PEP has been found to bind to one site/monomer of EI(H189A) with K_A′10⁶ M⁻¹ (ΔG′=−33.7±0.2 kJ mol⁻¹ and ΔH=+16.3 kJ mol⁻¹ at 20 °C with ΔC_p=−1.4 kJ K⁻¹ mol⁻¹). The binding of PEP to EI(H189A) is synergistic with that of Mg²⁺. Thus, physiological concentrations of PEP and Mg²⁺ increase, whereas pyruvate and Mg²⁺ decrease the amount of dimeric, active, dephospho-enzyme I.     

First steps in radiation-induced hydrogel synthesis: radical formation and oligomerization in dilute aqueous N-isopropylacrylamide solutions

The reactions of hydroxyl radical, hydrogen atom and hydrated electron intermediates of water radiolysis with N-isopropylacrylamide (NIPAAm) were studied by pulse radiolysis in dilute aqueous solutions. OH, H and e_aq⁻ react with NIPAAm with rate coefficient of (6.9±1.2)×10⁹, (6.6±1)×10⁹, and (1.0±0.2)×10¹⁰ mol⁻¹ dm³ s⁻¹. In OH and H radical addition to the double bond mainly -carboxyalkyl type radicals form, (OHCH₂CH^√C(N-i-C₃H₇)O and CH₃CH^√C(N-i-C₃H₇)O). In reaction of e_aq⁻ oxygen atom centered radical anion is produced (CH₂CHC^√(N-i-C₃H₇)O⁻), the anion undergoes reversible protonation with pK_a=8.7. There is also an irreversible protonation on the β-carbon atom that produces the same radical as forms in H atom reaction (CH₃CH^√C(N-i-C₃H₇)O). The -carboxyalkyl type radicals at low NIPAAm concentration (0.1–1 mmol dm⁻³) mainly disappear in self-termination reactions, 2k_t,m=8.4×10⁸ mol⁻¹ dm³ s⁻¹. At higher concentrations the decay curves reflect the competition of the self-termination and radical addition to monomer (propagation). The termination rate coefficient of oligomer radicals containing a few monomer units is 2k_t≈2×10⁸ mol⁻¹ dm³ s¹.     

Anodic characterization of mercury microelectrodes for determinations of anions in real samples

The anodization of mercury microelectrodes was investigated in synthetic samples containing several strong and weak electrolytes at different concentrations. In particular, the effects on mercury anodization due to the presence of NaOH, HClO₄, NaCl, NaI, NaF, Na₂SO₄, NaHCO₃, Na₂CO₃, tartaric and citric acids, were studied in solutions containing either each species or mixtures of them, and without addition of supporting electrolyte. Some of the electrode processes studied led to linear calibration plots e.g. 1 × 10⁻⁵ − 1 × 10⁻⁴M Cl⁻, 1 × 10⁻⁶ − 1 × 10⁻⁵M I⁻, 5 × 10⁻⁴ − 3 × 10⁻³M SO₄²⁻, 5 × 10⁻⁴ − 2 × 10⁻²M HCO₃⁻, with typical correlation coefficients of 0.998–0.999. The anodization of mercury microelectrodes was also investigated directly in wine, rain, tap and mineral water, without pretreatment and without addition of supporting electrolyte. In the real samples only the ions Cl⁻ and HCO₃⁻ could be quantified, and the values found were in agreement, within 3–5%, with the reference values obtained by using Italian standard methods for food.     

Determination of absorptivity and formation constant of a chalcone association complex

A UV spectrometric method was developed to determine the molar absorptivity (_C) and formation constant (K_c) of the association complex of unsubstituted chalcone in cyclohexane, in the concentration range from 4.00·10⁻⁴ to 2.00·10⁻² mol dm⁻³. The thermodynamic and spectroscopic magnitudes such as K_c and _C contribute to the understanding of the physicochemical behavior of several ,β-unsaturated carbonylic compounds, of low solubility in water, as it is the case of numerous flavonoids of chemical and biological importance. The studied association complex, formed by two chalcone molecules, is characterized by the constants _C (300.8 nm)=4.98·10⁴ dm³ mol⁻¹ cm⁻¹ and K_c=5.58·10³. The method proposed is convenient for the study of solute–solute molecular associations particularly those due to dipole–dipole interactions.     

The effects of molecular reorientation on the absorption of intense light by organic-dye solutions

Equations are presented for the spectral and orientational distribution of unexcited dye molecules in the field of an intense giant laser pulse. The solute dye molecules are linear oscillators that may be broadened either homogeneously or inhomogeneously, and may reorient by sudden jumps over large angles or by small angular steps (brownian rotational motion). The equations are employed to analyze the intensity dependence of fluorescence polarization observed by Mourou and Denariez-Roberge for the system cryptocyanine-glycerin. Their data are consistent with an excited-state deactivation time T₁ = 0.4 ± 1.0 ns and a rotational diffusion constant D = 20/T₁ = 5.0 × 10⁹ s⁻¹     

Phosphorescence of biacetyl sensitized by benzene in gas phase pulse radiolysis

The phophorescence of biacetyl induced by an energy transfer to biacetyl from triplet benzene produced in the pulse radiolysis of benzene-biacetyl mixtures has been studied. The time required to reach the maximum intensity of phosphorescence, t_max, after the electron pulse, varies as a function of biacetyl pressure at constant benzene pressure (40 torr), which gives the lifetime of triplet benzene τ = (6.7 ± 3.2) × 10⁻⁶ s and the rate constant of the energy transfer k_{C6H6^*(T1) + biacetyl} = (1.6 ± 0.7) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹.     

S2 → S0 fluorescence in an aromatic thioketone, xanthione

In addition to the red phosphorescence (T₁(³ A₂n, π^*) → S₀) xanthione exhibits in solution an emission with a maximum at ≈ 23 000 cm⁻¹ and φ_f(298°) = 5 × 10⁻³. It is shown that this emission is fluorescence from the second excited singlet state (S₂ (¹A₁ π, π^*) → S₀).     

Oxygen potential and phase equilibria in the Te-Sb2O3-Sb2O4 pseudoternary part of the Sb-Te-O system at elevated temperatures

Employing the electrochemical cells with the solid oxide electrolyte

Kanthal + Re, Te(l), TeO₂(s)O⁻² air, Pt

Pt + Re, Sb₂O₃(s), Sb₂O₄(s)O⁻² air, Pt

Pt + Re, Sb₂O₃(s), Sb₂O₄(s), Te(l)O⁻² air, Pt

the equilibrium oxygen potential in the pseudobinary Te-TeO₂, Sb₂O₃-Sb₂O₄ and in the Sb₂O₃-Sb₂O₄-Te pseudoternary systems was determined in the temperature range 700-1173 K. In addition, the pseudobinary sections Sb₂O₃-Te, Sb₂O₃-Sb₂O₄ (1:1)-Te and Sb₂O₄-Te were examined by DTA in the temperature range 500-1300 K. Using these results the evolution of the pseudoternary system with temperature can be suggested. It was found that, at 718 K, a ternary eutectic with a composition close to pure Te appears in the system. At a higher temperature, 920 K, another liquid phase is formed, which is characteristic of the ternary four-phase equilibrium L₂ + Sb₂O₄(s) + Sb₂O₃(s) = L₁.