Synthesis,molecular structure,non-isothermal decomposition kinetics and adiabatic time to explosion of 3,3-dinitroazetidinium 3,5-dinitrosalicylate

The title compound 3,3-dinitroazetidinium (DNAZ) 3,5-dinitrosalicylate (3,5-DNSA) was prepared and the crystal structure has been determined by a four-circle X-ray diffractometer. The thermal behavior of the title compound was studied under a non-isothermal condition by DSC and TG/DTG techniques. The kinetic parameters were obtained from analysis of the TG curves by Kissinger method, Ozawa method, the differential method and the integral method. The kinetic model function in differential form and the value of E _a and A of the decomposition reaction of the title compound are f(α)=4α^3/4, 130.83 kJ mol⁻¹ and 10_13.80s⁻¹, respectively. The critical temperature of thermal explosion of the title compound is 147.55 °C. The values of ΔS ^≠, ΔH ^≠ and ΔG ^≠ of this reaction are −1.35 J mol⁻¹ K₋₁, 122.42 and 122.97 kJ mol⁻¹, respectively. The specific heat capacity of the title compound was determined with a continuous C _p mode of mircocalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was obtained.     

Thermal behavior study and decomposition kinetics of salbutamol under isothermal and non-isothermal conditions

The thermal decomposition of salbutamol (β₂ — selective adrenoreceptor) was studied using differential scanning calorimetry (DSC) and thermogravimetry/derivative thermogravimetry (TG/DTG). It was observed that the commercial sample showed a different thermal profile than the standard sample caused by the presence of excipients. These compounds increase the thermal stability of the drug. Moreover, higher activation energy was calculated for the pharmaceutical sample, which was estimated by isothermal and non-isothermal methods for the first stage of the thermal decomposition process. For isothermal experiments the average values were E _act=130 kJ mol⁻¹ (for standard sample) and E _act=252 kJ mol⁻¹ (for pharmaceutical sample) in a dynamic nitrogen atmosphere (50 mL min⁻¹). For non-isothermal method, activation energy was obtained from the plot of log heating rates vs. 1/T in dynamic air atmosphere (50 mL min⁻¹). The calculated values were E _act=134 kJ mol⁻¹ (for standard sample) and E _act=139 kJ mol⁻¹ (for pharmaceutical sample).     

Kinetics of the exothermic decomposition of 1-nitro-3-(β,β,β-trinitroethyl)-4,5-dinitroiminoimidazolidine-2-one

The kinetic parameters of the exothermic decomposition of the title compound in a temperatureprogrammed mode have been studied by means of DSC. The DSC data obtained are fitted to the integral, differential, and exothermic rate equations by the linear least-squares, iterative, combined dichotomous, and least-squares methods, respectively. After establishing the most probable general expression of differential and integral mechanism functions by the logical choice method, the corresponding values of the apparent activation energy (E _a), preexponential factor (A), and reaction order (n) are obtained by the exothermic rate equation. The results show that the empirical kinetic model function in differential form and the values of E _a and A of this reaction are (1 − α)^−4.08, 149.95 kJ mol⁻¹, and 10^14.06 s⁻¹, respectively. With the help of the heating rate and kinetic parameters obtained, the kinetic equation of the exothermic decomposition of the title compound is proposed. The critical temperature of thermal explosion of the compound is 155.71°C. The above-mentioned kinetic parameters are quite useful for analyzing and evaluating the stability and thermal explosion rule of the title compound. The text was submitted by the authors in English.     

Thermal behavior of copper(II) 4-nitroimidazolate

The thermal behavior of copper(II) 4-nitroimidazolate (CuNI) under static and dynamic states are studied by means of high-pressure DSC (PDSC) and TG with the different heating rates and the combination technique of in situ thermolysis cell with rapid-scan Fourier transform infrared spectroscopy (thermolysis/RSFTIR). The results show that the apparent activation energy and pre-exponential factor of the major exothermic decomposition reaction of CuNI obtained by Kissinger’s method are 233.2 kJ mol⁻¹ and 10^17.95 s⁻¹, respectively. The critical temperature of the thermal explosion and the adiabatic time-to-explosion of CuNI are 601.97 K and 4.4∼4.6 s, respectively. The decomposition of CuNI begins with the split of the C-NO₂ and C-H bonds, and the decomposition process of CuNI under dynamic states occurs less readily than those under static states because the dynamic nitrogen removes the strong oxidative decomposition product (NO₂). The above-mentioned information on thermal behavior is quite useful for analyzing and evaluating the stability and thermal charge rule of CuNI.     

Pyrolysis kinetics of polypropylene

The pyrolysis of oil shale and plastic wastes is being presently considered as an alternative means of partial substitution of fossil fuels to generate the necessary energy to supply the increasing energy demand and as well as new technology to reduce the negative environment of plastic wastes. However, Knowledge of pyrolysis kinetics is of great imponrtance for the design and simulation of the reactor and in order to establish the optimum process conditions. In this study, the thermal decomposition of polypropylene, oil shale and their mixture was studied by TG under a nitrogen atmosphere. Experiments were carried out for various heating rates (2, 10, 20, 50 K min⁻¹) in the temperature range 300–1273 K. The values of the obtained activation energies are 207 kJ mol⁻¹ for polyethylene, 57 kJ mol⁻¹ for the organic matter contained in the oil shale and 174 kJ mol⁻¹ for the mixture. The results indicate that the decomposition of these materials depends on the heating rate, and that polypropylene acts as catalyst in the degradation of the oil shale in the mixture.     

Binding properties and structural changes of human growth hormone upon interaction with cobalt ion

Binding properties and structural changes of human growth hormone (hGH) due to the interaction by cobalt ion (Co²⁺) were done at 27°C in NaCl solution, 50 mM, using different techniques of UV-Vis spectroscopy, circular dichroism (CD), isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC) techniques. There is a set of three identical and non-interacting binding sites for cobalt ions. The intrinsic association equilibrium constant and the molar enthalpy of binding obtained by ITC are 0.80 mM⁻¹ and −16.70 kJ mol⁻¹, respectively. The intrinsic association equilibrium constant obtained by a standard isothermal titration UV-Vis spectrophotometry method is also 0.79 mM⁻¹, which is in good agreement with the value obtained from ITC. The Gibbs free energy and entropy changes due to the binding of cobalt ion on hGH are −16.67 kJ mol⁻¹ and −0.1 J K⁻¹ mol⁻¹, respectively. Energetic domains analysis by DSC shows that phase transition of hGH in the presence of cobalt occurs at one main transition. Deconvolution of the main transition provides two sub-transitions with different values of the melting point and enthalpy of unfolding (33°C and 164 kJ mol⁻¹ for the first and 49°C and 177 kJ mol⁻¹ for the second, respectively). Interaction of cobalt ions with hGH prevents aggregation by an affect on the hydrophobicity of the protein macromolecule and provide useful information about its structure due to becoming reversible of protein thermal denaturation.     

Synthesis and thermal behavior of 4,5-dihydroxyl-2-(dinitromethylene)-imidazolidine (DDNI)

A novel energetic material, 4,5-dihydroxyl-2-(dinitromethylene)-imidazolidine (DDNI), was synthesized by the reaction of FOX-7 and glyoxal in water at 70 °C. Thermal behavior of DDNI was studied with DSC and TG-DTG methods, and presents only an intense exothermic decomposition process. The apparent activation energy and pre-exponential factor of the decomposition reaction were 286.0 kJ mol⁻¹ and 10^31.16 s⁻¹, respectively. The critical temperature of thermal explosion of DDNI is 183.78 °C. Specific heat capacity of DDNI was studied with micro-DSC method and theoretical calculation method, and the molar heat capacity is 217.76 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time-to-explosion was also calculated to be a certain value between 14.54 and 16.34 s. DDNI presents lower thermal stability, for its two ortho-hydroxyl groups, and its thermal decomposition process becomes quite intense.     

Thermal behavior and thermal safety on 3,3-dinitroazetidinium salt of perchloric acid

3,3-Dinitroazetidinium (DNAZ) salt of perchloric acid (DNAZ·HClO₄) was prepared, it was characterized by the elemental analysis, IR, NMR, and a X-ray diffractometer. The thermal behavior and decomposition reaction kinetics of DNAZ·HClO₄ were investigated under a non-isothermal condition by DSC and TG/DTG techniques. The results show that the thermal decomposition process of DNAZ·HClO₄ has two mass loss stages. The kinetic model function in differential form, the value of apparent activation energy (E _a) and pre-exponential factor (A) of the exothermic decomposition reaction of DNAZ·HClO₄ are f(α) = (1 − α)⁻¹/2, 156.47 kJ mol⁻¹, and 10^15.12 s⁻¹, respectively. The critical temperature of thermal explosion is 188.5 °C. The values of ΔS ^≠, ΔH ^≠, and ΔG ^≠of this reaction are 42.26 J mol⁻¹ K⁻¹, 154.44 kJ mol⁻¹, and 135.42 kJ mol⁻¹, respectively. The specific heat capacity of DNAZ·HClO₄ was determined with a continuous C _p mode of microcalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was evaluated as 14.2 s.     

Titanium(IV)–EDTA complex

This work aims the evaluation of the kinetic triplets corresponding to the two successive steps of thermal decomposition of Ti(IV)–ethylenediaminetetraacetate complex. Applying the isoconversional Wall–Flynn–Ozawa method on the DSC curves, average activation energy: E=172.4±9.7 and 205.3±12.8 kJ mol^–1, and pre-exponential factor: logA=16.38±0.84 and 18.96±1.21 min^–1 at 95% confidence interval could be obtained, regarding the partial formation of anhydride and subsequent thermal decomposition of uncoordinated carboxylate groups, respectively. From E and logA values, Dollimore and Málek methods could be applied suggesting PT (Prout–Tompkins) and R3 (contracting volume) as the kinetic model to the partial formation of anhydride and thermal decomposition of the carboxylate groups, respectively.     

The thermal decomposition of N , N -dimethyl-3-oxaglutaramic acid and the kinetics of its second-stage thermal decomposition reaction

N,N-dimethyl-3-oxa-glutaramic acid was purified and characterized by ¹H-NMR, Fourier transform infrared spectroscopy (FT-IR) and elemental analysis. The thermal decomposition of the title compound was studied by means of thermogravimetry differential thermogravimetry (TG-DTG) and FT-IR. The kinetic parameters of its second-stage decomposition reaction were calculated and the decomposition mechanism was discussed. The kinetic model function in a differential form, apparent activation energy and pre-exponential constant of the reaction are 3/2 [(1−α)^1/3−1]⁻¹, 203.75 kJ·mol⁻¹ and 10^17.95s⁻¹, respectively. The values of ΔS ^≠, ΔH ^≠ and ΔG ^≠ of the reaction are 94.28 J·mol⁻¹·K⁻¹, 203.75 kJ·mol⁻¹ and 155.75 kJ·mol⁻¹, respectively. Supported by the National Natural Science Foundation of China (Grant No. 20106009)     

Investigation of the thermal properties of [Cd(hydet-en)2Pd(CN)4] AND [Zn(hydet-en)2Pd(CN)4] single crystals

Thermal properties of the single crystals have been investigated by thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. The thermodynamic parameters such as activation energy and enthalpy and thermal stability temperature of the samples were calculated from the differential thermal analysis (DTA) and TG data. The activation energies for first peak of DTA curves were found as 496.65 (for Cd–Pd) and 419.37 kJ mol^–1 (for Zn–Pd). For second peak, activation energies were calculated 116.56 (for Cd–Pd) and 173.96 kJ mol^–1 (for Zn–Pd). The thermal stability temperature values of the Cd–Pd and Zn–Pd compounds at 10°C min^–1 heating rate are determined as approximately 220.7 and 203°C, respectively. The TG results suggest that thermal stability of the Cd–Pd complex is higher than that of the Zn–Pd complex.     

Non-isothermal kinetic analysis and feasibilty study of medium grade crude oil field

In this research, non-isothermal kinetics and feasibility study of medium grade crude oil is studied in the presence of a limestone matrix. Experiments were performed at a heating rate of 10°C min⁻¹, whereas the air flow rate was kept constant at 50 mL min⁻¹ in the temperature range of 20 to 600°C (DSC) and 20 to 900°C (TG). In combustion with air, three distinct reaction regions were identified in all crude oil/limestone mixtures, known as low temperature oxidation (LTO), fuel deposition (FD) and high temperature oxidation (HTO). The activation energy values were in the order of 5–9 kJ mol⁻¹ in LTO region and 189–229 kJ mol⁻¹ in HTO region. It was concluded that the medium grade crude oil field was not feasible for a self-sustained combustion process.     

Thermogravimetric Analysis of Cobalt(II)-dothiepin Complexes

The complexes of cobalt(II) with dothiepin (DOT) hydrochloride have been studied for kinetics of thermal degradation by thermogravimetric analysis (TG) and derivative thermogravimetric studies (DTG) in a static nitrogen atmosphere at a heating rate of 10° C min⁻¹. A general mechanism of thermal decomposition is advanced involving dehydration and decomposition process for both organic and inorganic ligands. The thermal degradation reactions were found to proceed in three steps having an activation energy in the range 6.75–170 kJ mol⁻¹. Thermal decomposition kinetics parameters were computed on the basis of thermal decomposition data. This revised version was published online in July 2006 with corrections to the Cover Date.     

Pyrolysis of petroleum fractions

Dynamic kinetic analyses were performed on different Brazilian petroleum fractions by thermogravimetry. The data were treated by a multiple heating rate methodology. The apparent activation energies for the light and middle fractions within the range of 62–74 kJ mol⁻¹ and for heavy distillation residues were within the range of 80–100 kJ mol⁻¹ at lower conversions and 100–240 kJ mol⁻¹ at higher conversions. The kinetic study can be a criterion for tells apart the main phenomena involved in the thermal behavior of the refinery feedstock.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Thermal Analysis Studies on Isopropylnitrate

Isopropylnitrate (IPN) is described as a detonable material used in propellants and explosives. While there is considerable information available on its sensitivity and compatibility with other materials, very little is known about its thermochemical properties. This paper will describe the results obtained from some DSC, heat flux calorimetry (HFC) and accelerating rate calorimetry (ARC) measurements. The ASTM DSC method using a hermetic aluminum pan having a lid with a laser-produced pin hole was used to determine the vapour pressure of IPN₁. Results calculated from an Antoine equation are in substantial agreement with those determined from DSC measurements. From the latter measurements, the enthalpy of vaporization was determined to be 35.32±0.62 kJ mol⁻¹. Attempts to determine vapour pressures above about 0.8 MPa resulted in significant decomposition of IPN_g. The enthalpy change for decomposition in sealed glass systems was found to be -3.43±0.09 kJ g⁻¹ and -3.85±0.03 kJ g⁻¹, respectively from DSC and HFC measurements on IPN₁ samples loaded in air. Slightly larger exotherms were observed for the HFC results in air than those in inert gas, suggesting some oxidation occurs. In contrast, no significant difference in the observed onset temperature of about 150°C was observed for both the HFC and ARC results. From DSC measurements, an Arrhenius activation energy for decomposition of 126±4 kJ mol⁻¹ was found. These measurements were also conducted in sealed glass systems and decomposition appeared to proceed primarily from the liquid phase. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal Decomposition of Some Chemical Compounds Used As Food Preservatives and Kinetic Parameters of This Process

Thermal decomposition processes of selected chemicals used as food preservatives such as sodium formate, sodium propionate, sodium nitrates(V and III) and sodium sulphate(IV) were examined by the derivatographic method. Based on the curves obtained, the number of decomposition stages and characteristic temperatures of these compounds have been found. Mass decrements calculated from TG curves ranged from 28.9% for sodium formate to 77.8% for sodium nitrate(V), while sodium sulphate showed a mass increment of 5.6%. Kinetic parameters such as activation energy (E _a ), frequency factor (A ) and reaction order (n ) were calculated from TG, DTG and T curves. Sodium formate shows the highest values of E _a and A which amount to 171.7 kJ mol^–1 and 5.8⋅10¹⁴ s^–1 , respectively, while the lowest ones, E _a =28.2 kJ mol^–1 and A =3.65⋅10² s^–1 belong to sodium nitrate(V). This revised version was published online in August 2006 with corrections to the Cover Date.     

Ion-pair formation in the outer-sphere electron transfer reactions between tris-(1, 10) phenanthroline iron(II) and the halopentacyanocobaltate(III) complexes in aqueous acidic solutions

The kinetics of the reactions between Fe(phen) ₃ ²⁺ [phen = tris–(1,10) phenanthroline] and Co(CN)₅X³⁻ (X = Cl, Br or I) have been investigated in aqueous acidic solutions at I = 0.1 mol dm⁻³ (NaCl/HCl). The reactions were carried out at a fixed acid concentration ([H⁺] = 0.01 mol dm⁻³) and the second-order rate constants for the reactions at 25 °C were within the range of (0.151–1.117) dm³ mol⁻¹ s⁻¹. Ion-pair constants K _ip for these reactions, taking into consideration the protonation of the cobalt complexes, were 5.19 × 10⁴, 3.00 × 10² and 4.02 × 10⁴ mol⁻¹ dm⁻³ for X = Cl, Br and I, respectively. Activation parameters measured for these systems were as follows: ΔH* (kJ K⁻¹ mol⁻¹) = 94.3 ± 0.6, 97.3 ± 1.0 and 109.1 ± 0.4; ΔS* (J K⁻¹) = 69.1 ± 1.9, 74.9 ± 3.2 and 112.3 ± 1.3; ΔG* (kJ) = 73.7 ± 0.6, 75.0 ± 1.0 and 75.7 ± 0.4; E _a (kJ) = 96.9 ± 0.3, 99.8 ± 0.4, and 122.9 ± 0.3; A (dm³ mol⁻¹ s⁻¹) = (7.079 ± 0.035) × 10¹⁶, (1.413 ± 0.011) × 10¹⁷, and (9.772 ± 0.027) × 10²⁰ for X = Cl, Br, and I respectively. An outer – sphere mechanism is proposed for all the reactions.     

The self-heating effect in the process of KMnO4 decomposition in vacuum

It has been shown that the exothermic decomposition of KMnO₄ in vacuum is accompanied by a significant self-heating effect. It manifests itself in the reduction of the molar enthalpy of the reaction, determined by the third-law method. In comparison with the value 138.3±0.6 kJ mol⁻¹ that is valid for the decomposition of KMnO₄ under atmospheric pressure at 493–553 K, the molar enthalpy in vacuum (10⁻⁴-10⁻⁷ bar) at 484–511 K varies in the range of 136 to 126 kJ mol⁻¹. This is related to the reduction of the thermal conductivity of residual air in the furnace and, as a result, to the self-heating of the reactant, that accelerates the exothermic reaction. A simple method of evaluation of the self-heating effect has been developed. By analogy with the known method for evaluation of the self-cooling effect, it is based on the determination of the molar enthalpy by the third-law method at two different temperatures. The increase of sample temperature above the furnace temperature Tf in the case of the exothermic decomposition of KMnO₄ in a high vacuum and T _f≥490 K reaches a few tens of degrees.     

The thermal dehydration and decomposition of Ba[Cu(C2O4)2(H2O)]·5H2O

The thermal behaviour of Ba[Cu(C₂O₄)₂(H₂O)]·5H₂O in N₂ and in O₂ has been examined using thermogravimetry (TG) and differential scanning calorimetry (DSC). The dehydration starts at relatively low temperatures (about 80°C), but continues until the onset of the decomposition (about 280°C). The decomposition takes place in two major stages (onsets 280 and 390°C). The mass of the intermediate after the first stage corresponded to the formation of barium oxalate and copper metal and, after the second stage, to the formation of barium carbonate and copper metal. The enthalpy for the dehydration was found to be 311±30 kJ mol^–1 (or 52±5 kJ (mol of H₂O)^–1). The overall enthalpy change for the decomposition of Ba[Cu(C₂O₄)₂] in N₂ was estimated from the combined area of the peaks of the DSC curve as –347 kJ mol^–1. The kinetics of the thermal dehydration and decomposition were studied using isothermal TG. The dehydration was strongly deceleratory and the -time curves could be described by the three dimensional diffusion (D3) model. The values of the activation energy and the pre-exponential factor for the dehydration were 125±4 kJ mol^–1 and (1.38±0.08)×10¹⁵ min^–1, respectively. The decomposition was complex, consisting of at least two concurrent processes. The decomposition was analysed in terms of two overlapping deceleratory processes. One process was fast and could be described by the contracting-geometry model withn=5. The other process was slow and could also be described by the contracting-geometry model, but withn=2.The values ofE _a andA were 206±23 kJ mol^–1 and (2.2±0.5)×10¹⁹ min^–1, respectively, for the fast process, and 259±37 kJ mol^–1 and (6.3±1.8)×10²³ min^–1, respectively, for the slow process.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthday