Was braucht man für eine Super‐Batterie?

Without lithium ion batteries todays society is not imaginable. Mobile phones, notebooks, tablet PCs, photo cameras or handheld consoles, all these battery powered devices equipment have become essential for our daily lives. Only the high energy density, the proven reliability and the long life of the lithium ion battery (LIB) technology make it possible, to operate portable consumer electronics devices in that manner that we are used to. LIBs are also considered for application in electro mobility and for stationary storage of renewable energy. Here significant advances in R&D as well as in application have been made in the last years, and the expectations for the future of this technology are still growing. Can the LIB or an alternative battery system fulfill these expectations? Will there be a new “super battery” chemistry? Are there new fields of research in battery chemistry and – technology for tomorrow and where?. These questions will be addressed by two articles on “High energy density accumulators”.     

Lithium Azide as an Electrolyte Additive for All‐Solid‐State Lithium–Sulfur Batteries

Of the various beyond‐lithium‐ion battery technologies, lithium–sulfur (Li–S) batteries have an appealing theoretical energy density and are being intensely investigated as next‐generation rechargeable lithium‐metal batteries. However, the stability of the lithium‐metal (Li°) anode is among the most urgent challenges that need to be addressed to ensure the long‐term stability of Li–S batteries. Herein, we report lithium azide (LiN₃) as a novel electrolyte additive for all‐solid‐state Li–S batteries (ASSLSBs). It results in the formation of a thin, compact and highly conductive passivation layer on the Li° anode, thereby avoiding dendrite formation, and polysulfide shuttling. It greatly enhances the cycling performance, Coulombic and energy efficiencies of ASSLSBs, outperforming the state‐of‐the‐art additive lithium nitrate (LiNO₃).     

TiO2 Microboxes with Controlled Internal Porosity for High‐Performance Lithium Storage

Titanium dioxide (TiO₂) is considered a promising anode material for high‐power lithium ion batteries (LIBs) because of its low cost, high thermal/chemical stability, and good safety performance without solid electrolyte interface formation. However, the poor electronic conductivity and low lithium ion diffusivity of TiO₂ result in poor cyclability and lithium ion depletion at high current rates, which hinder them from practical applications. Herein we demonstrate that hierarchically structured TiO₂ microboxes with controlled internal porosity can address the aforementioned problems for high‐power, long‐life LIB anodes. A self‐templating method for the synthesis of mesoporous microboxes was developed through Na₂EDTA‐assisted ion exchange of CaTiO₃ microcubes. The resulting TiO₂ nanorods were organized into microboxes that resemble the microcube precursors. This nanostructured TiO₂ material has superior lithium storage properties with a capacity of 187 mAh g⁻¹ after 300 cycles at 1 C and good rate capabilities up to 20 C.     

Structure Design and Performance of LiNixCoyMn1‐x‐yO2 Cathode Materials for Lithium‐ion Batteries: A Review

Lithium‐ion batteries are now considered to be the technology of choice for future hybrid electric and full electric vehicles to address global warming. One of the challenges for improving the performance of lithium ion batteries to meet increasingly demanding requirements for energy storage is the development of suitable cathode materials. The recent advancement of lithium nickel cobalt manganese oxides are investigated as advanced positive cathode materials for lithium‐ion batteries. This review aims at providing the reader with an understanding of the critical scientific challenges facing the development of LiNi_xCo_yMn_1‐x‐yO₂ materials, the latest developments in crystal structure, synthesis methods, and structure designs to unravel the mechanisms of charge and mass transport processes associated with battery performance, and the outlook for future‐generation batteries that exploit gradient structures materials for significantly improved performance to meet the ever‐increasing demands of emerging technologies.     

From Lithium‐Ion to Sodium‐Ion Batteries: Advantages,Challenges, and Surprises

Mobile and stationary energy storage by rechargeable batteries is a topic of broad societal and economical relevance. Lithium‐ion battery (LIB) technology is at the forefront of the development, but a massively growing market will likely put severe pressure on resources and supply chains. Recently, sodium‐ion batteries (SIBs) have been reconsidered with the aim of providing a lower‐cost alternative that is less susceptible to resource and supply risks. On paper, the replacement of lithium by sodium in a battery seems straightforward at first, but unpredictable surprises are often found in practice. What happens when replacing lithium by sodium in electrode reactions? This review provides a state‐of‐the art overview on the redox behavior of materials when used as electrodes in lithium‐ion and sodium‐ion batteries, respectively. Advantages and challenges related to the use of sodium instead of lithium are discussed.     

三元锂离子电池容量衰减机理研究进展

三元锂离子电池主要是指使用镍钴锰酸锂（NCM）或镍钴铝酸锂（NCA）作为正极材料的锂离子电池,三元锂离子电池广泛应用于电动汽车、3C电子产品、储能等领域。然而,三元锂离子电池的循环寿命已成为其进一步发展的最大障碍,因此了解三元锂离子电池的容量衰退机理具有重要意义。三元锂离子电池的衰退机理主要包括五个方面：晶体结构的改变和相变、活性材料的损失、电解质的分解和消耗、可脱嵌锂离子的损耗以及固体电解质界面的形成。本文总结了近年来相关方面的研究进展,以期更全面地总结三元锂离子电池的容量衰减机理,并对三元锂离子电池的应用前景进行了展望。     

The advance of fiber-shaped lithium ion batteries

With the development of wearable devices, much attention has been paid to the energy supply for these devices. Traditional batteries are not suitable for wearable devices due to their rigidity and high-density. Meanwhile, flexible and lightweight planar batteries cannot be fitted to the fabric well and have poor permeability, which lower the degree of the wearing comfort of the fabric. Therefore, the fiber-shaped lithium ion battery (LIB) becomes one of the best energy storage devices which can solve all the problems mentioned above because of its light-weight, flexibility, weavability and stretchability. However, the capacity of fiber-shaped LIBs is always lower than the capacity of planar batteries because of the low loading of active materials, and the circuit connection will be very complicated in further weaving. In this review article, we introduce the development of the fiber-shaped LIB, summarize the main challenges and finally point out the future direction of this field.     

An Electrolytic Zn–MnO2 Battery for High‐Voltage and Scalable Energy Storage

Zinc‐based electrochemistry is attracting significant attention for practical energy storage owing to its uniqueness in terms of low cost and high safety. However, the grid‐scale application is plagued by limited output voltage and inadequate energy density when compared with more conventional Li‐ion batteries. Herein, we propose a latent high‐voltage MnO₂ electrolysis process in a conventional Zn‐ion battery, and report a new electrolytic Zn–MnO₂ system, via enabled proton and electron dynamics, that maximizes the electrolysis process. Compared with other Zn‐based electrochemical devices, this new electrolytic Zn–MnO₂ battery has a record‐high output voltage of 1.95 V and an imposing gravimetric capacity of about 570 mAh g^?1, together with a record energy density of approximately 409 Wh kg^?1 when both anode and cathode active materials are taken into consideration. The cost was conservatively estimated at <US$ 10 per kWh. This result opens a new opportunity for the development of Zn‐based batteries, and should be of immediate benefit for low‐cost practical energy storage and grid‐scale applications.     

金属锂电池的热失控与安全性研究进展

锂离子电池在便携式储能器件及电动汽车领域得到了广泛应用,然而频繁发生的电池起火爆炸事故,使热失控和热安全问题备受人们关注,目前已有多篇综述报道了缓解锂离子电池热失控的措施。相比于已经接近理论比能极限的锂离子电池,金属锂负极具有更高的比容量、更低的电势和高反应活性,但是不可控的锂枝晶生长,使得金属锂电池的热失控问题更为复杂和严重。针对金属锂电池的热失控问题,本文首先介绍了热失控的诱因及基本过程和阶段,其次从材料层面综述了提高电池热安全性的多种策略,包括使用阻燃性电解质、离子液体电解质、高浓电解质和局域高浓电解质等不易燃液态电解质体系,开发高热稳定性隔膜、热响应隔膜、阻燃性隔膜和具有枝晶检测预警与枝晶消除功能的新型智能隔膜,以及研究热响应聚合物电解质,最后对金属锂电池热失控在未来的进一步研究进行了展望。     

Realizing both High Energy and High Power Densities by Twisting Three Carbon‐Nanotube‐Based Hybrid Fibers

Energy storage devices, such as lithium‐ion batteries and supercapacitors, are required for the modern electronics. However, the intrinsic characteristics of low power densities in batteries and low energy densities in supercapacitors have limited their applications. How to simultaneously realize high energy and power densities in one device remains a challenge. Herein a fiber‐shaped hybrid energy‐storage device (FESD) formed by twisting three carbon nanotube hybrid fibers demonstrates both high energy and power densities. For the FESD, the energy density (50 mWh cm^?3 or 90 Wh kg^?1) many times higher than for other forms of supercapacitors and approximately 3 times that of thin‐film batteries; the power density (1 W cm^?3 or 5970 W kg^?1) is approximately 140 times of thin‐film lithium‐ion battery. The FESD is flexible, weaveable and wearable, which offers promising advantages in the modern electronics.     

锂金属负极人造保护膜的研究进展

金属锂因其具有极高的理论容量(3860 mAh·g^?1)、最低的电极电位(?3.04 V vs.标准氢电极)和低的密度(0.534 g·cm^?3),被认为是最具潜力的负极材料。但循环过程中不可控的枝晶生长及不稳定的固体电解质相界面膜所引起的安全隐患和电池库伦效率低等问题严重阻碍了锂金属负极的发展。通过在电极表面构建人造保护膜可以有效调控锂离子沉积行为,因此人造保护膜的构建是一种简单高效抑制锂枝晶生长的策略。本综述将从聚合物保护膜、无机保护膜、有机-无机复合保护膜和合金保护膜总结了人造保护膜的构建方法、抑制锂枝晶生长机理,为促进高比能锂金属电池的商业化应用提供借鉴参考作用。     

High‐Performance Lithium–Air Battery with a Coaxial‐Fiber Architecture

The lithium–air battery has been proposed as the next‐generation energy‐storage device with a much higher energy density compared with the conventional lithium‐ion battery. However, lithium–air batteries currently suffer enormous problems including parasitic reactions, low recyclability in air, degradation, and leakage of liquid electrolyte. Besides, they are designed into a rigid bulk structure that cannot meet the flexible requirement in the modern electronics. Herein, for the first time, a new family of fiber‐shaped lithium–air batteries with high electrochemical performances and flexibility has been developed. The battery exhibited a discharge capacity of 12 470 mAh g^?1 and could stably work for 100 cycles in air; its electrochemical performances were well maintained under bending and after bending. It was also wearable and formed flexible power textiles for various electronic devices.     

Self‐Healable Solid Polymeric Electrolytes for Stable and Flexible Lithium Metal Batteries

The key issue holding back the application of solid polymeric electrolytes in high‐energy density lithium metal batteries is the contradictory requirements of high ion conductivity and mechanical stability. In this work, self‐healable solid polymeric electrolytes (SHSPEs) with rigid‐flexible backbones and high ion conductivity are synthesized by a facile condensation polymerization approach. The all‐solid Li metal full batteries based on the SHSPEs possess freely bending flexibility and stable cycling performance as a result of the more disciplined metal Li plating/stripping, which have great implications as long‐lifespan energy sources compatible with other wearable devices.     

锂离子电容器(LIC)产业前沿技术研究进展

新能源战略体系的建设和电子技术的飞速发展对储能器件的性能提出了更高的要求,锂离子电容器是将锂离子电池和双电层电容器“内部交叉”的新型混合储能器件,兼具高能量密度和高功率密度,近年来引起了国内外的广泛关注.本文阐述了锂离子电容器的工作原理和国内外产业发展现状,总结了碳负极的预赋锂技术、电极材料与体系匹配性研究等关键技术前沿的研究成果,并提出了后续产业化研究中所需要解决的实际问题.     

Towards K‐Ion and Na‐Ion Batteries as “Beyond Li‐Ion”

Li‐ion battery commercialized by Sony in 1991 has the highest energy‐density among practical rechargeable batteries and is widely used in electronic devices, electric vehicles, and stationary energy storage system in the world. Moreover, the battery market is rapidly growing in the world and further fast‐growing is expected. With expansion of the demand and applications, price of lithium and cobalt resources is increasing. We are, therefore, motivated to study Na‐ and K‐ion batteries for stationary energy storage system because of much abundant Na and K resources and the wide distribution in the world. In this account, we review developments of Na‐ and K‐ion batteries with mainly introducing our previous and present researches in comparison to that of Li‐ion battery.     

Halide‐Based Materials and Chemistry for Rechargeable Batteries

Rechargeable batteries are considered one of the most effective energy storage technologies to bridge the production and consumption of renewable energy. The further development of rechargeable batteries with characteristics such as high energy density, low cost, safety, and a long cycle life is required to meet the ever‐increasing energy‐storage demands. This Review highlights the progress achieved with halide‐based materials in rechargeable batteries, including the use of halide electrodes, bulk and/or surface halogen‐doping of electrodes, electrolyte design, and additives that enable fast ion shuttling and stable electrode/electrolyte interfaces, as well as realization of new battery chemistry. Battery chemistry based on monovalent cation, multivalent cation, anion, and dual‐ion transfer is covered. This Review aims to promote the understanding of halide‐based materials to stimulate further research and development in the area of high‐performance rechargeable batteries. It also offers a perspective on the exploration of new materials and systems for electrochemical energy storage.     

An Intrinsic Flame‐Retardant Organic Electrolyte for Safe Lithium‐Sulfur Batteries

Safety concerns pose a significant challenge for the large‐scale employment of lithium–sulfur batteries. Extremely flammable conventional electrolytes and dendritic lithium deposition cause severe safety issues. Now, an intrinsic flame‐retardant (IFR) electrolyte is presented consisting of 1.1 m lithium bis(fluorosulfonyl)imide in a solvent mixture of flame‐retardant triethyl phosphate and high flashpoint solvent 1,1,2,2‐tetrafluoroethyl‐2,2,3,3‐tetrafluoropropyl (1:3, v/v) for safe lithium–sulfur (Li?S) batteries. This electrolyte exhibits favorable flame‐retardant properties and high reversibility of the lithium metal anode (Coulombic efficiency >99 %). This IFR electrolyte enables stable lithium plating/stripping behavior with micro‐sized and dense‐packing lithium deposition at high temperatures. When coupled with a sulfurized pyrolyzed poly(acrylonitrile) cathode, Li?S batteries deliver a high composite capacity (840.1 mAh g^?1) and high sulfur utilization of 95.6 %.     

State-of-the-art anodes of potassium-ion batteries: synthesis,chemistry, and applications

The growing demand for green energy has fueled the exploration of sustainable and eco-friendly energy storage systems. To date, the primary focus has been solely on the enhancement of lithium-ion battery (LIB) technologies. Recently, the increasing demand and uneven distribution of lithium resources have prompted extensive attention toward the development of other advanced battery systems. As a promising alternative to LIBs, potassium-ion batteries (KIBs) have attracted considerable interest over the past years owing to their resource abundance, low cost, and high working voltage. Capitalizing on the significant research and technological advancements of LIBs, KIBs have undergone rapid development, especially the anode component, and diverse synthesis techniques, potassiation chemistry, and energy storage applications have been systematically investigated and proposed. In this review, the necessity of exploring superior anode materials is highlighted, and representative KIB anodes as well as various structural construction approaches are summarized. Furthermore, critical issues, challenges, and perspectives of KIB anodes are meticulously organized and presented. With a strengthened understanding of the associated potassiation chemistry, the composition and microstructural modification of KIB anodes could be significantly improved.

State-of-the-art tendency, present critical issues and future opportunities of anode active materials in potassium ion batteries are systematically summarized.     

Strategies towards Low‐Cost Dual‐Ion Batteries with High Performance

Rocking‐chair based lithium‐ion batteries (LIBs) have extensively applied to consumer electronics and electric vehicles (EVs) for solving the present worldwide issues of fossil fuel exhaustion and environmental pollution. However, due to the growing unprecedented demand of LIBs for commercialization in EVs and grid‐scale energy storage stations, and a shortage of lithium and cobalt, the increasing cost gives impetus to exploit low‐cost rechargeable battery systems. Dual‐ion batteries (DIBs), in which both cations and anions are involved in the electrochemical redox reaction, are one of the most promising candidates to meet the low‐cost requirements of commercial applications, because of their high working voltage, excellent safety, and environmental friendliness compared to conventional rocking‐chair based LIBs. However, DIB technologies are only at the stage of fundamental research and considerable effort is required to improve the energy density and cycle life further. We review the development history and current situation, and discuss the reaction kinetics involved in DIBs, including various anionic intercalation mechanism of cathodes, and the reactions at the anodes including intercalation and alloying to explore promising strategies towards low‐cost DIBs with high performance.     

A Bipolar and Self‐Polymerized Phthalocyanine Complex for Fast and Tunable Energy Storage in Dual‐Ion Batteries

Bipolar redox organics have attracted interest as electrode materials for energy storage owing to their flexibility, sustainability and environmental friendliness. However, an understanding of their application in all‐organic batteries, let alone dual‐ion batteries (DIBs), is in its infancy. Herein, we propose a strategy to screen a variety of phthalocyanine‐based bipolar organics. The self‐polymerizable bipolar Cu tetraaminephthalocyanine (CuTAPc) shows multifunctional applications in various energy storage systems, including lithium‐based DIBs using CuTAPc as the cathode material, graphite‐based DIBs using CuTAPc as the anode material and symmetric DIBs using CuTAPc as both the cathode and anode materials. Notably, in lithium‐based DIBs, the use of CuTAPc as the cathode material results in a high discharge capacity of 236 mAh g^?1 at 50 mA g^?1 and a high reversible capacity of 74.3 mAh g^?1 after 4000 cycles at 4 A g^?1. Most importantly, a high energy density of 239 Wh kg^?1 and power density of 11.5 kW kg^?1 can be obtained in all‐organic symmetric DIBs.