Spectrophotometric and gravimetric determination of sulfur in sebacate-base lubricants

Sulfur is determined in sebacate-base lubricants spectrophotometrically and gravimetrically. In the spectrophotometric method, a 0.2–0.3-g sample is treated with mixed acids, magnesium chloride is added, and the solution is evaporated to dryness. The sulfate is reduced to hydrogen sulfide by treatment with a mixture of hydriodic. hypophosphorous, and hydrochloric acids, and the hydrogen sulfide is distilled into ammonia solution. Lead citrate reagent is added and the brownish yellow color of lead sulfide sol is measured. An improved technique and apparatus for the distillation is described. In the gravimetric method, a 5-g sample is treated with mixed acids, antimony and tin are volatilized by treatment with hydrobromic acid, and sulfur is precipitated as barium sulfate. The recommended range of the spectrophotometric method is 0.005–0.15%,and that of the gravimetric method is 0.01–1% sulfur.     

用计算全息法检测卡塞格林系统主镜

为实现对卡塞格林光学系统中的非球面主镜表面面形的高精度检测,设计了一种二元位相型计算全息图(CGH)。介绍了工作原理,对CGH的相位模型参数的优化设计、衍射次级分离以及台阶位置与深度计算等关键问题进行了讨论。通过引入虚拟玻璃的概念快速建立非球面检测模型,针对卡塞格林系统主镜中心开孔的特点,通过加入同轴载波实现了衍射次级的完全分离,相比目前常用的倾斜载波方法简化了相位量化复杂度,数值仿真计算出了最优的台阶深度,降低了加工难度。给出了相应的设计方法及实例,研制投产了CGH。测试得到主镜面形的均方根误差为0.018λ,并与传统补偿器结果(RMS=0.019λ)进行对比,两者测试结果吻合,验证了该设计与检测方法的正确性,该设计方法简单快捷,适用于卡塞格林光学系统主镜面形检测。     

水性聚氨酯的制备及其性能的研究

本文以琥珀酸酐与三羟甲基丙烷反应,制得了含有羟基和羧基的酯类亲水性单体,并以此单体与ＴＤＩ和ＰＰＧ－１０００反应,制得了含有羧基的聚氨酯预聚体,在三乙醇胺水溶液中分散得到了水性聚氨酯（简称ＷＰＵ）。本文对预聚体的溶剂种类和用量,对乳胶粒的大小及形状的影响进行了研究,确认溶剂的用量越大,乳胶的粒径就越小;以丙酮作溶剂,乳胶粒为棒状或橄榄球状,而以丁酮为溶剂,得到的乳胶粒为圆球状。通过改变亲水单体的用     

山东省主栽果树生殖器官中稀土与微量营养元素的相关性研究

通过对山东省5大类主栽果树20余个树种的花粉、种子和果实稀土与微量元素自然含量进行分析比较, 认为稀土(RE)与微量元素在各树种花粉中平均含量顺序为Fe＞Zn＞B＞Cu＞Mn＞RE, 种子中B＞Fe＞Zn＞Mn＞Cu＞RE, 果实中Fe＞B＞Zn＞Cu＞Mn＞RE. 各元素在各生殖器官中的自然分布因树种而有很大差异. 但基本规律类同, 即花粉＞种子＞果实. 花粉富集各种微量营养元素的能力都很强. 花粉和果实稀土与微量元素之间绝大多数呈正相关, 种子大多呈负相关, 但相关性均不显著.     

Determination of free, total, and esterified cholesterol by high-performance liquid chromatography

A method is described for measuring free, total, and esterified cholesterol in blood serum in which reversed-phase liquid chromatography is used and the eluate is monitored at 200 nm. The sample for total cholesterol is prepared according to the Abell-Kendall procedure, and for free cholesterol an extract of serum--isopropanol (1:5, v/v) is used. The column is a muBondapak C18, 10 micrometers, and the mobile phase for total cholesterol is isopropanol--acetonitrile (50:50, v/v); for free cholesterol, it is isopropanol--acetonitrile--water (60:30:10). An approximation of the free cholesterol, triglycerides, and individual cholesteryl esters is obtained from single chromatograms of isopropanol extracts of serum if the first mobile phase is used. In a comparison study with the Abell-Kendall method for total cholesterol, the correlation is excellent and the precision is acceptable.     

Spectrophotometric determination of pentaerythritol tetranitrate (PETN) in waste water from lead styphnate primer plants

An accurate spectrophotometric method is proposed for the determination of pentaerythritol tetranitrate (PETN) in waste water from lead styphnate primer plants by use of phenoldisulphonic acid. The waste water is filtered through a sintered glass crucible and the PETN is determined in the filtrate and the residue. In the determination of PETN in the filtrate, sodium hydroxide is added and the PETN is extracted with methylene chloride (in alkaline solution, styphnate and TNT are not extracted). The methylene chloride solution is then evaporated to dryness, the residue is treated with a solution of phenoldisulphonic acid in sulphuric acid, water and ammonia are added, and the yellow colour is measured. In the determination of PETN in the residue, the PETN is dissolved in acetone, an aliquot of the acetone solution is treated with water and sodium hydroxide, the PETN is extracted with methylene chloride and the colour is developed as above. Various factors affecting the determination were investigated. The solubility of PETN in water was studied.     

微波消解-ICP-MS测定电镀污泥中的重金属

采用微波消解系统对某电镀污泥进行消解,利用ICP-MS对污泥中的重金属进行测定。称取制备后样品,置于消解罐中充分反应后,赶酸、定容后利用电感耦合等离子体质谱法进行测定。电镀污泥中的铬为18845.2mg/kg、镉为10.3mg/kg、镍为5200.0mg/kg、铅为189.7mg/kg、铜为3271.7mg/kg、锌为49632.6mg/kg。测定结果表明所检测项目工作曲线线性关系好,相关系数r均大于0.999。铬加标回收率在91.6～97.7%之间、镉加标回收率在92.0～97.0%之间、镍加标回收率在95.1～98.0%之间、铅加标回收率在94.3～95.2%之间、铜加标回收率在97.1～102%之间、锌加标回收率在96.3～98.7%之间,均满足相关测定要求。计算的潜在生态危害系数、潜在生态危害指数结果表明,电镀污泥中的铬、镉、铅、铜、锌为轻微生态危害,镍为强生态危害;潜在生态危害指数RI计算值为216.69,属于中等生态危害。     

Wastewater treatment using nanomaterial quaternary photocatalyst ZrCdPbO4 - Removal of colour pollutant by an eco friendly process

Pollution of environment is a major issue and has drawn attention of researchers throughout the globe. Water is polluted by various means like excretion of various industries and house releases, for example release of yarn, paper, and cloth industries etc. Present investigation consists of removal of such a pollutant. For this, synthesis of a novel quaternary nano particle sized photocatalyst ZrCdPbO₄ is carried and its characterization by different analytical techniques is also carried out. This is further used for removal of colour pollutants from the environment and Erythrosine-B is considered as a role model. Effect of various operational parameters like pH, concentration of dye, amount of photocatalyst, irradiation power etc. is studied, maximum degradation condition is extracted, and it is observed that reaction follows pseudo first order kinetics. Scavenger study suggests the participation of OH free radical in the reaction. Complete degradation of the dye in presence of light and photocatalyst is reported here by. Reusability of the photocatalyst is tested and is found to work up to five cycles efficiently.     

聚苯胺薄膜电极上示差脉冲伏安法可逆波理论研究

本文提出了聚苯胺(PANI)薄膜电极上示差脉冲伏安法可逆波理论,经验证理论和实验结果相符合.     

Prospective study to assess the clinical efficacy of bone scintigraphy--some analyses of clinical data

The value of preoperative bone scans in patients with primary breast and prostate cancer was evaluated prospectively. Of 414 patients with breast cancer, clinical stage I is 14, II is 219, IIIA is 59, IIIB is 39 and IV is 14. Of 88 patients with prostate cancer, clinical stage I is 14, II is 15, III is 18 and IV is 41. 11 percent of patients with breast cancer and 54 percent of patients with prostate cancer had bone metastases. Clavicle, ribs, thoracic spine, lumbar spine and pelvis metastasized most frequently. The incidences of bone metastases were 18.4% with Scirrhous carcinoma, 15.4% with Medullary tubular carcinoma and 3.8% with Papillotubular carcinoma. The methodology and results of ROC analysis were described in our other papers. Some results of data analysis were described in this paper.     

D241树脂分离纯化黄芩总黄酮的研究

本文研究了用241树脂分离纯化黄芩总黄酮的方法和工艺。实验结果表明：D241树脂对黄芩总黄酮的静态交换容量是77mg/ml树脂。在pH11.0、流速2.0BV/h、提取液中总黄酮浓度17.5mg/ml条件下，D241树脂对黄芩总黄酮的动态交换容量为43.8mg/ml。用60％甲醇作为黄芩总黄酮洗脱剂，在PH4.0、洗脱流速1.5BV/h条件下，4．5BV洗脱剂即可完全洗脱被D241树脂交换的黄芩总黄酮。与酸沉淀法相比较，经过除去果胶，总黄酮纯度由33．34％提高到74．9％，粗品收得率由11.52%降低至4.83%；经过D241树脂分离纯化，其纯度达到91.5%，产品收得率3.54%。     

Adsorption and structure of hydrocarbons in MCM-41: a computational study

The adsorption of linear, branched, and cyclic hydrocarbons in MCM-41 is studied using Configurational Bias Monte Carlo simulations. A new computational model for MCM-41 is proposed which, although simple, is able to predict adsorption isotherms which are in agreement with the scarce experimental data. The structure of the adsorbed phase is analyzed and found to be similar to that of studies using small, hard spheres trapped in pores. The adsorption of mixtures is investigated, and the adsorption hierarchy is discussed. The structure of the adsorbed mixture is revealed and shows that all components of the mixture exhibit structure, even if they are only adsorbed in small quantities. Finally, the model is modified to include surface roughness and the effect on the adsorption isotherms and structure of the adsorbed phase is discussed.     

Precolumn,Capillary Column,Electron Capture G-AS Chromatography For High Efficiency Trace Determination

Abstract

A method for gas chromatographic trace determination is described in which the sample solution is injected into a packed precolumn which is connected to an EC-detector. When solvent and low boiling compounds have been eluted, the precolumn is connected to the cold entry of a capillary column with another EC-detector and the trace compound is collected as a narrow band at the entry of this column. The precolumn is then reconnected to its own detector, the capillary column is heated and the trace compound is eluted and measured. Meanwhile high boiling compounds are swept out of the precolumn. When the base line of the precolumn is stable the next sample is injected and the capillary column is cooled again, and so on. In order to avoid background plateaus and ghost peaks the carrier gas must be purified, which is easily achieved with cooling traps with dry-ice and acetone.     

Chronoamperometric current at finite disk electrodes

The chronoamperometric current at a stationary finite disk electrode is studied using both analytical and digital simulation techniques. The exact long-time expansion of the current is obtained and its short-time behavior is considered. Digital simulation of the current using an explicit hopscotch algorithm is presented. In contrast to the usual explicit difference method, the ‘hopscotch’ algorithm is unconditionally stable, and thus, it is particularly suited for studying electrochemical problems at intermediate and long times. A simple analytic expressions for the current, which is accurate to 0.6% for all times, is presented.     

A Study on Alkyl Polyglycosides of the Starch

The alkyl polyglycosides (APG) is new type the surfactants that is made by regenerationresource of the starch and the grease, since the nineties of 20th century it is energetically exploited ininternational extent. APG not only good in surface activity, but also plenty on bubble, thin greasyand stabilization, there are good decontamination, compatibility, innocuity, not incitation and uniquefunction that organism decomposition of swiftness and downrightness, and so on.APG is to get production that loses one molecule water with half condensation aldehyde hydroxyand sebum alcohol hydroxy under acid catalysis. The production not is one simplicity compound, butis one of sugar polymerization degree, so it is mixture of the alkyl single glucoside, the alkyl twoglucoside and the alkyl three glucoside.Author synthesizes the surfactants of the alkyl polyglycosides, with the oleaster and potato starchand sebum alcohol, that was chosen to use duality system activator of plant acid and p-toluene-sulfoacid for the first time. The adoption way is that the lower alkyl polyglycosides is firstly formed byreaction of lower alcohol with starch then exchanged with high alcohol to obtain APG. The study isto make certain most technics condition, determining capillary tension and the pastern sheafdeepness of critical, calculating HLB value, determining construction by 1R.To synthesize principium:Peroration :[1]Duality system activator of plant acid and p-toluene-sulfo acid is compare idea activator that was the lower alkyl polyglycosides is firstly formed by reaction of lower alcohol with glucose then exchanged with high alcohol to obtain high alkyl polyglycosides. The advantage is that it overcomes agglomeration, there is reaction entirety, high of sugar transform ratio, reaction time short.[2]Most good reaction temperature is 90～ 170℃, the dosage of activator is 0.5%～0.9%, the mated ratio: The APG of glucose basic butane ratio starch is 5:1, the APG of potato starch basic glycol ratio starch is 6:1, the APG of the oleaster starch basic glycol ratio starch is 12:1, the APG of the mealiest starch basic glycol ratio starch is 6:1, the product of complex is good property.[3]The alkyl polyglycosides is the products of surfactant. IR determines the functional group of the products. On the basis of group of the hydrophile and to close on oil, that the feature peak of α-1, 4- glucoside.[4]The capillary tension of the APG is 26.8～31.0mN/m, the HLB value is 16～18, the products is better emulsifying agent of water- solubility. (O/W).     

Spectrophotometric determination of bismuth in copper and cartridge brass by the iodide method

An improved spectrophotometric method is proposed for the determination with iodide of trace amounts of bismuth in copper and cartridge brass. The sample is dissolved in nitric acid and the bismuth is separated from the copper by an ammoniacal precipitation in the presence of iron(III) hydroxide as a gathering agent. The hydroxide precipitate is dissolved in hydrochloric acid, sulfuric acid is added, the solution is evaporated to a few ml, hydrobromic acid is added to volatilize the antimony and tin, and the solution is evaporated to fumes of sulfuric acid. The bismuth iodide color is then developed with a composite potassium iodide—sodium hypophosphite reagent. Factors affecting the bismuth iodide color are investigated.     

A rapid solvent extraction method for the determination of caesium-137 in environmental materials

A solvent extraction method for the quantitative determination of caesium-137 in environmental samples is described. Caesium carrier is added to the ashed sample, which is dissolved with hydrochloric acid. The solution is filtered to remove any carbon and the pH is adjusted to 2.0. Sodium dodecylbenzene sulphonate is added and the extraction is done with phenol-nitrobenzene mixture. The organic phase is washed with EDTA solution and the caesium is stripped from the washed solvent with 6 M hydrochloric acid. The caesium is precipitated as caesium chlorostannate to ensure absolute decontamination from potassium-40. Recovery from standard solution is about 85% and from vegetation, rainwater and effluent samples about 80%. The method is applicable in the presence of large quantities of interfering ions, and decontamination factors for many nuclides are greater than 10³.     

Facile Electrochemical Hydrogenation and Chlorination of Glassy Carbon to Produce Highly Reactive and Uniform Surfaces for Stable Anchoring of Thiolated Molecules

Carbon is a highly adaptable family of materials and is one of the most chemically stable materials known, providing a remarkable platform for the development of tunable molecular interfaces. Herein, we report a two‐step process for the electrochemical hydrogenation of glassy carbon followed by either chemical or electrochemical chlorination to provide a highly reactive surface for further functionalization. The carbon surface at each stage of the process is characterized by AFM, SEM, Raman, attenuated total reflectance (ATR) FTIR, X‐ray photoelectron spectroscopy (XPS), and electroanalytical techniques. Electrochemical chlorination of hydrogen‐terminated surfaces is achieved in just 5 min at room temperature with hydrochloric acid, and chemical chlorination is performed with phosphorus pentachloride at 50 °C over a three‐hour period. A more controlled and uniform surface is obtained using the electrochemical approach, as chemical chlorination is observed to damage the glassy carbon surface. A ferrocene‐labeled alkylthiol is used as a model system to demonstrate the genericity and potential application of the highly reactive chlorinated surface formed, and the methodology is optimized. This process is then applied to thiolated DNA, and the functionality of the immobilized DNA probe is demonstrated. XPS reveals the covalent bond formed to be a C?S bond. The thermal stability of the thiolated molecules anchored on the glassy carbon is evaluated, and is found to be far superior to that on gold surfaces. This is the first report on the electrochemical hydrogenation and electrochemical chlorination of a glassy carbon surface, and this facile process can be applied to the highly stable functionalization of carbon surfaces with a plethora of diverse molecules, finding widespread applications.     

Determination of streptomycin residues in food by solid-phase extraction and liquid chromatography with post-column derivatization and fluorometric detection

A reliable and sensitive procedure is presented for the analysis of streptomycin (STP) in food of animal origin, like meat, milk and honey. The method is based on a separation by ion-pair liquid chromatography with β-naphthoquinone-4-sulfonate (NQS) postderivatization and fluorescence detection. The clean-up of the extract is done by solid-phase extraction, firstly with a cation-exchange cartridge and secondly with an octadecyl cartridge. The selectivity is very good and not many interfering peaks are observed for various food matrices. The streptomycin recovery of the total procedure is superior to 80%. The procedure is quantitatively characterized and repeatability, linearity, detection and quantification limits are very satisfactory. A special focus is given to STP residues in honeys and a survey on 64 commercial honeys is presented. For honey analysis, the HPLC method is compared with an immunoassay test (ELISA), and the possibility of using this test for screening with and without solid-phase extraction clean-up is also discussed.     

电感耦合等离子体质谱法测定氧化钕中砷含量

建立草酸沉淀分离氧化钕,用校正方程消除残余钕离子产生的双电荷离子干扰,电感耦合等离子体质谱法测定砷含量的方法。选择了溶解样品条件,硝酸溶解样品即能满足检测要求;优化了仪器条件,功率1500W,雾化器流量0.86L/min;进行了内标元素的选择,确定Rh为最佳校正内标元素;确定用草酸分离基体并结合干扰校正方程消除钕的双电荷离子干扰;方法检出限为0.029 ng/mL,定量限为0.097 ng/mL。采用方法对实际样品进行测定,回收率(n=11)为94%～104%,相对标准偏差(RSD,n=11)为0.56%～5.82%。