Synthesis,Characterization, and Highly Selective Ethylene Dimerization to 1‐Butene of [O−NX]Ni(II) Complexes

A series of nickel(II) complexes have been synthesized and characterized. Molecular structure analysis exhibits that a square planar geometry around nickel is adopted. Upon activation with MAO, these nickel(II) complexes are efficient in catalyzing the ethylene dimerization, providing 1‐butene with an activity of up to 1.4×10⁷ g/(mol·h·atm). The heteroatoms of the sidearm in the complexes were proved to have great impact on the activity and selectivity of 1‐butene.     

N‐(2‐benzimidazolylquinolin‐8‐yl)benzamidate half‐titanocene chlorides: Synthesis,characterization and their catalytic behavior toward ethylene polymerization

A series of N‐(2‐benzimidazolyquinolin‐8‐yl)benzamidate half‐titanocene chlorides, Cp′TiLCl ( C1 – C8 : Cp′ = C₅H₅, MeC₅H₄, or C₅Me₅; L = N‐(benzimidazolyquinolin‐8‐yl)benzamides)), was synthesized by the KCl elimination reaction of half‐titanocene trichlorides with the correspondent potassium N‐(2‐benzimidazolyquinolin‐8‐yl)benzamide. These half‐titanocene complexes were fully characterized by elemental and NMR analyses, and the molecular structures of complexes C2 and C8 were determined by the single‐crystal X‐ray diffraction. The high stability of the pentamethylcyclopentadienyl complex ( C8 ) was evident by no decomposing nature of its solution in air for one week. The oxo‐bridged dimeric complex ( C9 ) was isolated from the solution of the corresponding cyclopentadienyl complex ( C3 ) solution in air. Complexes C1 – C8 exhibited good to high catalytic activities toward ethylene polymerization and ethylene/α‐olefin copolymerization in the presence of methylaluminoxane (MAO) cocatalyst. In the typical catalytic system of C1/ MAO, the polymerization productivities were enhanced with either elevating reaction temperature or increasing the ratio of MAO to titanium precursor. In general, it was observed that higher the catalytic activity of the catalytic system lower the molecular weight of polyethylene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3154–3169, 2009     

Copolymerization of ethylene with cyclopentene or 2‐butene with half titanocenes‐based catalysts

Half titanocenes (CpCH₂CH₂O)TiCl₂ (1), (CpCH₂CH₂OCH₃)TiCl₃ (2), and CpTiCl₃ (3), activated by methylaluminoxane (MAO) were tested in copolymerization of ethylene with internal olefins such as cyclopentene. All the catalysts were able to give incorporation of cyclopentene in polyethylene matrix. ¹³C NMR analysis of obtained copolymers showed that the catalytic systems have low regiospecificity. In fact, in ethylene–cyclopentene copolymers, cyclic olefin inserts with both 1,2 and 1,3‐enchainment. X‐ray powder diffraction analysis of these copolymers confirmed that 1,2 inserted cyclopentene units are excluded from crystalline phase, whereas 1,3‐cyclopentene units are included, giving rise to expansion of unit cell of crystalline polyethylene. Titanium‐based catalysts were investigated also in the copolymerization of ethylene with E and Z‐2‐butene. Only complex (1) was able to give copolymers and ¹³C NMR analysis of products showed 2‐3, 1‐3, and 1‐2 insertion of 2‐butene. Differential scanning calorimetry analysis displayed that ethylene–cyclopentene, as well as ethylene‐2‐butene, copolymers are crystalline and their melting point decreases by increasing the comonomer content. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4725–4733, 2008     

Synthesis and characterization of Ni (II) complexes supported by phenoxy/naphthoxy‐imine ligands with pendant N‐ and O‐donor groups and their use in ethylene oligomerization

A series of new Ni(II) complexes of general formula Ni{ZNO} Br ( 2a‐i ) (ZNO = phenoxy/naphthoxy‐imine with pendant N‐ and O‐donor groups) were prepared and characterized by elemental analysis, IR spectroscopy, ESI‐HRMS, and by X‐ray crystallography for 2e . In the solid state, 2e features a monomeric structure with κ³ coordination of the monoanionic naphthoxy‐imine‐quinoline ligand onto the nickel center. Upon activation with MAO, both classes of nickel catalysts were able to produce selectively 1‐butene (81.5–92.1 wt%) with turnover frequencies (TOFs) varying from 3,100 to 24,300 mol(C₂H₄) mol (Ni)^?1 h^?1. Nickel precatalysts bearing phenoxy‐imine ligands were much more active than its naphthoxy analogous under the same conditions. The use of a mixture of cocatalysts (MAO/TMA or MAO/TiBA) resulted in poor activities; however the presence of TiBA in the milieu led to a significant improvement on selectivity for 1‐hexene (25.5 wt%). Under optimized conditions ([Ni] = 10 μmol, 30 °C, oligomerization time = 5 min, 20 bar ethylene, [Al]/[Ni] = 600), precatalyst 2c led to TOF = 59,900 mol(C₂H₄) mol(Ni)^?1 h^?1 and selectivity for 1‐butene of 89.5 wt%.     

Synthesis,Characterization and Ethylene Oligomerization Behavior of Neutral Nickel Complexes Bearing N‐Fluorinated Phenyl Salicylaldiminato Chelate Ligands

A series of neutral nickel complexes featuring N‐fluorinated phenyl salicylaldiminato chelate ligands was synthesized, and the novel molecular structure of complex C14 was further confirmed by X‐ray crystallographic analysis. The neutral nickel complexes showed high activity up to 9.96×10⁵ g oligomers/(mol Ni·h) and high selectivity of C₆ in catalyzing ethylene oligomerization using methylaluminoxane (MAO) as cocatalyst. It was observed that the strong electron‐withdrawing effect of the fluorinated salicylaldiminato ligand was able to significantly increase the catalytic activity for oligomerization of ethylene. In addition, the influence of reaction parameters such as Al/Ni molar ratio, reaction temperature, a variety of cocatalyst and ethylene pressure on catalytic activity was investigated.     

Imino‐indolate half‐titanocene chlorides: Synthesis and their ethylene (co‐)polymerization

A series of imino‐indolate half‐titanocene chlorides, Cp′Ti(L)Cl₂ ( C1 – C7 : Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = imino‐indolate ligand), were synthesized by the reaction of Cp′TiCl₃ with sodium imino‐indolates. All complexes were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. Moreover, the molecular structures of two representative complexes C4 and C6 were confirmed by single crystal X‐ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activities for ethylene polymerization (up to 7.68 × 10⁶ g/mol(Ti)·h) and ethylene/1‐hexene copolymerization (up to 8.32 × 10⁶ g/mol(Ti)·h), producing polyolefins with high molecular weights (for polyethylene up to 1808 kg/mol, and for poly(ethylen‐co‐1‐hexene) up to 3290 kg/mol). Half‐titanocenes containing ligands with alkyl substituents showed higher catalytic activities, whereas the half‐titanocenes bearing methyl substituents on the cyclopentadienyl groups showed lower productivities, but produced polymers with higher molecular weights. Moreover, the copolymerization of ethylene and methyl 10‐undecenoate was demonstrated using the C1 /MAO catalytic system. The functionalized polyolefins obtained contained about 1 mol % of methyl 10‐undecenoate units and were fully characterized by several techniques such as FT‐IR, ¹H NMR, ¹³C NMR, DSC, TGA and GPC analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 357–372, 2009     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Cobalt complexes based on hyperbranched salicylaldimine ligands as catalyst precursors for ethylene oligomerization

Three hyperbranched salicylaldimine ligands with tetradecyl as core, with hexadecyl as core and with octadecyl as core were synthesized in good yields. These ligands were reacted with cobalt chloride hexahydrate to form three complexes ( C1 – C3 ). The compounds were characterized using Fourier transform infrared, ¹H NMR, mass and UV spectroscopies and thermogravimetric and differential thermal analyses. The catalytic properties of the hyperbranched cobalt complexes were evaluated for ethylene oligomerization. The effects of solvent and reaction parameters (Al/Co molar ratio, temperature and reaction pressure) on ethylene oligomerization were studied using the cobalt complex C3 as pre‐catalyst and methylaluminoxane (MAO) as co‐catalyst. Under these conditions ([Co] = 5 μmol, Al/Co = 500, 25 °C, 0.5 MPa ethylene, 30 min), the catalytic activity of complex C3 in toluene was 1.85 × 10⁵ g (mol Co)⁻¹ h⁻¹ and the selectivity for C₈₊ oligomers was 55.72%. The complex structure also had a significant influence on both the catalytic activity and selectivity. All three cobalt complexes, activated with MAO, showed moderate activities towards ethylene oligomerization and the activity of cobalt complex C1 was up to 1.99 × 10⁵ g (mol Co)⁻¹ h⁻¹. The kinds of metal center of complexes (cobalt complex C1 and nickel complex with tetradecyl as core) and their catalytic properties were investigated in detail under the same conditions.     

Novel Dendritic PNP Chromium Complexes: Synthesis,Characterization, and Performance on Ethylene Oligomerization

Three dendritic PNP ligands with ethylenediamine, 1,4‐butanediamine, 1,6‐diaminohexane as bridged groups are synthesized in good yields, respectively. Three dendritic PNP chromium complexes ( C1  –  C3 ) are prepared with the ligands and chromium(III ) chloride tetrahydrofuran complex (CrCl₃(THF )₃) as materials. The dendritic PNP ligands and the synthetic chromium complexes are fully characterized by spectroscopic and analytical methods. All chromium complexes activated with methylaluminoxane (MAO ) exhibited moderate activities on ethylene oligomerization (7.90 × 10⁴ – 2.15 × 10⁵ g (mol Cr h)⁻¹] and had better selectivity for C₆ and C₈ oligomer, reaching up to 81%. The chromium complex ( C1 ) activated with diethylaluminium chloride (Et₂AlCl) has higher catalytic activity than the chromium complex C1 activated with MAO , although the chromium complex ( C1 ) activated with Et₂AlCl had lower selectivity for C₆ and C₈ oligomer. The effects of solvent and reaction parameters on ethylene oligomerization are also studied using the chromium complex C1 as pre ‐ catalyst and MAO as co ‐ catalyst. Under optimized conditions ([complex] = 2 μmol, Al/Cr = 500, 25 °C, 0.9 MP a ethylene, 30 min), the catalytic activity of complex C1 in toluene is 2.15 × 10⁵ g (mol Cr h)⁻¹ and the selectivity for C₆ and C₈ oligomer is 36.76%. In addition, the structure of complexes significantly affects both the catalytic activity and the selectivity on ethylene oligomerization.     

Synthesis and characterization of ethylene‐propylene‐1‐pentene terpolymers

Ethylene (E), propylene (P), and 1‐pentene (A) terpolymers differing in monomer composition ratio were produced, using the metallocenes rac‐ethylene bis(indenyl) zirconium dichloride/methylaluminoxane (rac‐Et(Ind)₂ZrCl₂/MAO), isopropyl bis(cyclopentadienyl)fluorenyl zirconium dichloride/methylaluminoxane (Me₂C(Cp)(Flu)ZrCl₂/MAO, and bis(cyclopentadienyl)zirconium dichloride, supported on silica impregnated with MAO (Cp₂ZrCl₂/MAO/SiO₂/MAO) as catalytic systems. The catalytic activities at 25 °C and normal pressure were compared. The best result was obtained with the first catalyst. A detailed study of ¹³C NMR chemical shifts, triad sequences distributions, monomer‐average sequence lengths, and reactivity ratios for the terpolymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 947–957, 2008     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

Nickel-based ethylene oligomerization catalysts supported by PNSiP ligands

A series of nickel (II) complexes bearing silicon bridged diphosphines ligands (PNSiP) have been synthesized and characterized. All nickel precatalysts, activated with ethylaluminum dichloride (EtAlCl₂), exhibited moderate to high activities for ethylene dimerization to butylene. The in situ nickel precatalysts formed by mixing N-cyclopentyl-N-((diphenylphosphanyl)dimethylsilyl)-1,1-diphenylphosphanamine (L2) with NiBr₂(DME) showed high catalytic activity (2.40 × 10⁸ g/(mol_Ni·h)) and high product selectivity (88.6%) towards butene using methylcyclohexane as solvent at 1.0 MPa ethylene pressure and 45°C temperature, no polyethylene(PE) was observed. Ligand backbone tuning of PNSiP-based catalytic systems help in precise understanding of steric bulk variation effects on catalytic performance.     

Crystal Structure and Ethylene Oligomerization Catalytic Activity of {2-Carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2

The unsymmetric precursor ethyl 6-acetylpyridine-2-carboxylate （4） was synthesized from 2,6-dimethylpyridine （1）. On the basis of this precursor, a new mono（imino）pyridine ligand （5） and the corresponding Co（Ⅱ） complex {2-carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2 （6） were prepared. The crystal structure of complex indicates that the 2-carbethoxy-6-iminopyridine is coordinated to the cobalt as a tridentate ligand using [N, N, O] atoms, and the coordination geometry of the central cobalt is a distorted trigonal bipyramid, with the pyridyl nitrogen atom and the two chlorine atoms forming the equatorial plane. Being applied to the ethylene oligomedzation, this cobalt complex shows catalytic activity of 1.820× 10^4 g/mol-Cooh at 101325 Pa of ethylene at 15.5℃ for 1 h, when 1000 equiv, of methylaluminoxane （MAO） is employed as the cocatalyst.     

Thermo‐stable 2‐(arylimino)benzylidene‐9‐arylimino‐5,6,7,8‐tetrahydro cyclohepta[b]pyridyliron(II) precatalysts toward ethylene polymerization and highly linear polyethylenes

A series of 2‐(arylimino)benzylidene‐9‐arylimino‐5,6,7,8‐tetrahydrocyclohepta[b] pyridyliron(II) chlorides was synthesized and characterized using FT‐IR and elemental analysis, and the molecular structures of complexes Fe3 and Fe4 have been confirmed by the single‐crystal X‐ray diffraction as a pseudo‐square‐pyramidal or distorted trigonal‐bipyramidal geometry around the iron core. On activation with methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all iron precatalysts exhibited high activities toward ethylene polymerization with a marvelous thermo‐stability and long lifetime. The Fe4 /MAO system showed highest activity of 1.56 × 10⁷ gPE·mol^?1(Fe)·h^?1 at 70 °C, which is one of the highest activities toward ethylene polymerization by iron precatalysts. Even up to 80 °C, Fe3 /MAO system still persist high activity as 6.87 × 10⁶ g(PE)·mol^?1(Fe)·h^?1, demonstrating remarkable thermal stability for industrial polymerizations (80–100 °C). This was mainly attributing to the phenyl modification of the framework of the iron precatalysts. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 830–842     

Syntheses of Some New Group 4 non-Cp Complexes Bearing Schiff-base, Thiophene Diamide Ligands Respectively and Their Catalytic Activities for a-Olefin Polymerization

Totally sixteen new titanium and zirconium non-Cp complexes supported by Schiff-base, or thiophene diamide ligands have been synthesized. The complexes are obtained by the reaction of M(OPr-i)4(M=Ti,Zr) with the corresponding Schiff-base ligand in 1:1 molar ratio in good yield. The thiophene diamide titanium complex has been prepared from trimethylsilyl amine [N,S,N] ligand and TiCl4 in toluene at 120℃. All complexes are well charac-terized by ^1H NMR, IR, MS and elemental analysis. When activated by excess methylaluminoxane (MAO), complexes show moderate catalytic activity for ethylene polymerization, and complex If (R^1=CH3,R^2=Br) exhibits the highest activity for ethylene and styrene polymerization. When the complexes were preactivated by triethylaluminum (TEA), both polymerization activities and syndiotacticity of the polymers were greatly improved.     

Synthesis of ethylene‐1‐hexene copolymers from ethylene stock by tandem action of bis(2‐dodecylsulfanyl‐ethyl) amine‐CrCl3 and Et(Ind)2ZrCl2

In this work, ethylene‐1‐hexene copolymers were synthesized with a tandem catalysis system that consisted of a new trimerization catalyst bis(2‐dodecylsulfanyl‐ethyl) amine‐CrCl₃/MAO ( 1 /MAO) and copolymerization catalyst Et(Ind)₂ZrCl₂/MAO ( 2 /MAO) at atmosphere pressure. Catalyst 1 trimerized ethylene with high activity and excellent selectivity in the presence of a relatively low amount of MAO. Catalyst 2 incorporated the 1‐hexene content and produced ethylene‐1‐hexene copolymer from an ethylene‐only stock in the same reactor. Adjusting the Cr/Zr ratio and reaction temperature yielded various branching densities and thus melting temperatures. However, broad DSC curves were observed when low temperatures and/or high Cr/Zr ratios were employed due to an accumulation of 1‐hexene component and composition drifting during the copolymerization. It was found that a short pretrimerization period resulted in more homogeneous materials that gave unimodal DSC curves. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3562–3569, 2007     

Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008     

The bridged cyclopentadienyl indenyl (fluorenyl) zirconocene complexes for polyethylene macromonomers

The synthesis of long‐chain branched polyethylene includes the generation of vinyl‐terminated polyethylene macromonomers and the copolymerization of these macromonomers with ethylene. Four new bridged cyclopentadienyl indenyl (fluorenyl) zirconocene complexes 1a–b, 2a–b were prepared and showed high activities for ethylene homopolymerization upon the activation of methylaluminoxane. The steric bulk of bridged substituent has a profound effect on the catalytic activity as well as on the molecular weight of resulting polyethylene. Complex 1b showed the highest activity of up to 5.32 × 10⁶ g PE/(mol Zr h) for ethylene homopolymerization at 70 °C, which was higher than that of Cp₂ZrCl₂. The polyethylenes produced with complexes 1a–d/MAO are mostly vinyl‐terminated, possess low molecular weight and fit as macromonomers. The (p‐MePh)₂C‐bridged cyclopentadienyl indenyl zirconocene complex 1a could produce polyethylene macromonomer with selectivity for the vinyl‐terminal as high as 94.9%. Copyright © 2010 John Wiley & Sons, Ltd.     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007     

Ethylene Oligomerization by 8—Aminoquinoline Nickel Dichloride Complex Supported on β—Cyclodextrin

IntroductionSincetheexcellentcapabilityoflatetransitionmetalcomplexesforolefinpolymerization ,wasdiscoveredbyBrookhart1andGibson2 ,theinterestinthesecatalystshasgreatlyincreasedinbothacademicandindustrialresearches.3Unfortunately,intheolefinpolymerizationprocessinitiatedbylatetransitionmetalcomplexes,thepolyolefinsproducedoftendepositatthereactorwallsandstirringdevice ,whichwillbedisadvantageoustothefurtherapplicationofthesecat alysts.Inordertoovercometheseproblems,theheteroge nizationoftheho…