制备方法对超细Cu／ZnO／Al2O3催化剂上CO2＋H2合成甲醇的影响

制备方法对超细Ｃｕ／ＺｎＯ／Ａｌ_２Ｏ_３催化剂上ＣＯ_２＋Ｈ_２合成甲醇的影响张玉龙，王欢，邓景发（复旦大学化学系，上海，２００４３３）关键词超细粒子，合成甲醇，Ｃｕ／ＺｎＯ／Ａｌ_２Ｏ_３催化剂，ＣＯ_２＋Ｈ_２ＣＯ２＋Ｈ２合成甲醇是目前的热门课题［１～...     

CO／H2合成甲醇CuO—ZnO—ZrO2催化剂的研究

通过活性测定，ＸＲＤ、ＴＧ－ＤＴＡ表征，考察了共沉淀法制备的铜锌锆合成甲醇催化剂中ＺｒＯ２对物相结构、催化活性及热稳定性的影响。结果表明，ＺｒＯ２能显著提高ＣＯ／Ｈ２合成甲醇的催化活性和热稳定性。催化剂母体、氧化态和还原态的物相并未发生变化，仍分别为：Ｃｕ２（ＯＨ）３ＮＯ３，（Ｃｕ，Ｚｎ）５（ＣＯ３）２（ＯＨ）６，（Ｃｕ，Ｚｎ）２ＣＯ３（ＯＨ）２，Ｚｎ５（ＣＯ３）２（ＯＨ）６；ＣｕＯ、ＺｎＯ；Ｃｕ     

CO2加H2合成甲醇Cu—Zn—O催化剂表面化学态研究

应用ＸＲＤ、ＥＳＲ、ＵＲＤＳ、ＸＰＳ及ＸＡＥＳ等手段研究了ＣＯ２加Ｈ２合成甲醇Ｃｕ－Ｚｎ－Ｏ催化剂在还原后和反应状态下的表面化学状态。结果表明，在还原及反应状态下，催化剂表面仅能检测到ＣＵ＾０，而未发现稳定的Ｃｕ＾２＋和Ｃｕ＾＋存在；ＺｎＯ被 部分还原产生低价锌Ｚｎ＾（２－δ）＋（０＜δ＜２）。关联活性测试结果认为：Ｃｕ＾ｏ／Ｚｎ＾（２－δ）＋Ｏ构成ＣＯ２加Ｈ２合成甲醇反应的活性中心。     

CuO-ZnO基CO2/H2合成甲醇催化剂的反应活性中心

应用 ＸＰＳ，ＸＡＥＳ和紫外漫反射光谱法研究了ＣｕＯ－ＺｎＯ／氧化物上ＣＯ２／Ｈ２合成甲醇的反应活性中心。ＣｕＯ－ＺｎＯ／氧化物催化剂上的反应活性中心是存在于ＣｕＯ－ＺｎＯ固溶体中的Ｃｕ－口－Ｚｎ－Ｏ（＂口＂为氧空位），活性中心的Ｃｕ价态为Ｃｕ＾＋和Ｃｕ＾０。反应活性中心在ＣｕＯ－ＺｎＯ－Ｚｒｏ２催化剂上比在其它ＣｕＯ－ＺｎＯ／氧化物催化剂如ＣｕＯ－ＺｎＯ，ＣｕＯ－ＺｎＯ－ＭｇＯ，ＣｕＯ－ＺｎＯ－     

CO／H_2合成甲醇CuO－ZnO－ZrO_2催化剂的研究

通过活性测定，ＸＲＤ、ＴＧ－ＤＴＡ表征，考察了共沉淀法制备的铜锌锆合成甲醇催化剂中ＺｒＯ＿２对物相结构、催化活性及热稳定性的影响。结果表明，ＺｒＯ＿２能显著提高ＣＯ／Ｈ＿２合成甲醇的催化活性和热稳定性。催化剂母体、氧化态和还原态的物相并未发生变化，仍分别为：Ｃｕ＿２（ＯＨ）＿３ＮＯ＿３，（Ｃｕ，Ｚｎ）＿５（ＣＯ＿３）＿２（ＯＨ）＿６，（Ｃｕ，Ｚｎ）＿２ＣＯ＿３（ＯＨ）＿２，Ｚｎ＿５（ＣＯ＿３）＿２（ＯＨ）＿６；ＣｕＯ、２ｎＯ；Ｃｕ，ＺｎＯ。ＺｒＯ＿２使催化剂各组分的结晶度变得更差，晶粒更细。实验证明催化剂中ＺｒＯ＿２主要以无定形状态存在，也不排除与其它组分形成固溶体。本文还探讨了ＺｒＯ＿２提高催化活性和热稳定性的原因。认为ＺｒＯ＿２既起了载体的高分散作用，间隔活性组分作用，又起了增加和稳定活性中心的促进剂作用。     

CO_2加H_2合成甲醇Cu－Zn－O催化剂表面化学态研究

应用ＸＲＤ、ＥＳＲ、ＵＲＤＳ、ＸＰＳ及ＸＡＥＳ等手段研究了ＣＯ_２加Ｈ_２合成甲醇Ｃｕ－Ｚｎ－Ｏ催化剂在还原后和反应状态下的表面化学状态，结果表明，在还原及反应状态下，催化剂表面仅能检测到Ｃｕ~０，而未发现稳定的Ｃｕ~（２＋）和Ｃｕ~＋存在；ＺｎＯ被部分还原产生低价锌Ｚｎ~（２－δ）（０＜δ＜２）。关联活性测试结果认为，Ｃｕ~０／Ｚｎ~（（２－δ）＋）Ｏ构成ＣＯ_２加Ｈ_２合成甲醇反应的活性中心。     

在Cu-Zn-Al和Cu-Zn-Al-Li催化剂上CO/CO_2氢化制甲醇的研究(英文)

制备了Ｃｕ－Ｚｎ－Ａｌ （４／５０／５）催化剂（Ｃａｔ）和Ｃｕ－Ｚｎ－Ａｌ－Ｌｉ（４０／５０／５／５）催化剂（Ｃａｔ－Ｌｉ）．并将其分别用于由ＣＯ／Ｈ_２和ＣＯ_２／Ｈ_２合成甲醇。诸如ＴＰＤ、ＴＰＲ、ＴＰＳＲ、脉冲、ＣＤ３Ｉ－捕获、同位素标记、ＥＰＲ及原位ＤＲＩＦＴ等技术和方法被用来表征这两种催化剂及研究反应机理,对处于去氢、含氢及含氧态催化剂进行了对比研究以期阐明表面氧和表面氢对ＣＯ_２和ＣＯ活化所起的作用。提出了一个由甲酸根和甲醛氢化及甲醇氧化结果为证的ＣＯ／ＣＯ_２氢化机理。由于通过Ｌｉ 取代ＣｕＯ晶格上的Ｃｕ２＋形成的氢空位,在Ｃａｔ中添加Ｌｉ＋改善了甲醇合成活性。ＣＯ_２能被一捕获的电子（Ｆ-中心）活化,生成的ＣＯ2-能容易地被氢化成甲酸根和亚甲基双草酰,后者分解生成Ｈ２ＣＯ和表面氧。ＣＯ能被表面氧活化,生成的ＣＯ２－将遵循ＣＯ_２氢化的途径。在ＣＤ３Ｉ－捕获的实验中,我们捕获了表面氧。在无表面氧时,ＣＯ可能直接氢化成甲酸基,即ＣＯ_２氢化中的一途径。由亚甲基双草酰产生的Ｈ２ＣＯ表面模型可能与由甲醛吸附或ＣＯ氢化生成的Ｈ２ＣＯ表面模型不同。     

Fe－Mn－K催化剂FT合成反应的研究

研究了Ｆｅ－Ｍｎ－Ｋ催化剂ＦＴ合成动力学及产物分布规律，并探讨了反应条件对（ＣＯ＋Ｈ＿２）转化率及α－己烯／正己烷比的影响。结果表明，该催化剂的产物分布需用两个α才能较好地描述；反应温度及反应气氛下Ｈ＿２／ＣＯ比对α－己烯／正己烷比具有较大影响：最后获得的动力学方程为：－ｒ＿（Ｈ＿２＋ＣＯ）＝ａＰ＿（ＣＯ）Ｐ＿（Ｈ＿２）／（Ｐ＿（ＣＯ）＋ｂＰ＿（Ｈ＿２Ｏ）），从活化能的角度看，该粒度催化剂存在着内扩散效应。     

掺杂Cu^2＋离子水滑石[CdxMg6—xAl2（OH）16]^2＋[S·2H2O…

合成了掺杂Ｃｕ＾２＋离子水滑石〔ＣｄｘＭｇ６－ｘＡｌ２（ＯＨ）１６〕＾２＋〔Ｓ·２Ｈ２Ｏ〕＾２－，研究了它的导电性质及其影响因素，计算得到了３８３￣５２３Ｋ时的导电活化能为７．１８ｋＪ／ｍｏｌ。     

H2,CO和H2/CO在ZrO2催化剂上吸附行为研究

用ｉｎ ｓｉｔｕＦＴＩＲ法研究了Ｈ２、ＣＯ及ＣＯ／Ｈ２在ＺｒＯ２表面的吸附行为。结果表明,Ｈ２在ＺｒＯ２表面吸附存在两种形态的羟基（即ＺｒＯＨ和ＺｒＯＨＺｒ）,吸附温度增加,羟基数量增加。ＣＯ在２００℃易与ＺｒＯ２表面羟基作用形成甲酸盐物种,吸附温度升高时,该物种逐渐分解生成ＣＯ和ＺｒＯＨ。当ＣＯ和Ｈ２共存时,表面甲酸盐的量明显增加,并随温度增加,逐渐加氢形成甲氧基,最后生成甲烷。甲氧基的加氢过程     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.     

Adaptation o Cu／ZnO／Al2O3 to Temperature Change in Methanol Synthesis from CO2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change,The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation,and that this tendency was related to the difference in Cu/Cu^n ration caused by CO2 and CO produced at different reaction temperatures,However,the reverse water-gas shift reaction (BWGS) induced at four temperatures was completely different from that of methanol synthesis,It implied that the two so-called competitive reactions in CO2 H2,RWGS and methanol synthesis,have different, active centers.     

Adaptation of Cu/ZnO/Al2O3 to Temperature Change in Methanol Synthesis from CO2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperatureto investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The resultsindicated that a used catalyst had a tendency to keep the last running state in new reaction conditionsfor MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused byCO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction(RWGS) induced at four temperatures was completely different from that of methanol synthesis. It impliedthat the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have differentactive centers.     

Fe—Silicalite—2催化剂表面CO2加氢反应性能的研究

研究了Ｆｅ／Ｓｉｌｉｃａｌｉｔｅ－２催化剂ＣＯ２加氢低碳烯烃反应性能，利用ＣＯ２－ＴＰＤ，ＣＯ２／Ｈ２－ＴＰＳＲ和ＣＯ／Ｈ２－ＴＰＳＲ表征手段，考察了铁含量及ＭｎＯ助剂对Ｆｅ／Ｓｉｌｉｃａｌｉｔｅ－２催化剂ＣＯ２吸附脱附及加氢反应性能的影响，表明随铁含量增加可提高催化剂对ＣＯ２的吸附能力，有利于提高ＣＯ２加氢反应的转化率。     

CO对CO2加氢合成甲醇的影响

甲醇是重要的有机化工原料，同时它也已被确认为尾气污染少、辛烷值高的汽、柴油接烧的洁净燃料和大功率燃料电池的燃料[1]．随着世界石油贮量的枯竭，甲醇汽车将快速发展，所以CO2加氢合成甲醇具有广阔的应用前景和深远的理论意义．铜基催化剂上CO2加氢主要存在二个竞争反应[2     

CO和CO2在Cu／ZnO／Al2O3催化剂上加氢反应机理的原位红外研究

ＣｕＺｎＯＡｌ2Ｏ3催化剂用于合成甲醇的反应机理已经进行了大量的研究[1～3]。近年来,利用原位红外技术在研究合成甲醇的催化反应机理方面取得了不少研究成果[4～7]。但大多数实验是采用低铜含量催化剂[4,5]。本文采用高温加压式原位红外池,在513Ｋ和20ＭＰａ的条件下,...     

Cu@UiO-66衍生的Cu+-ZrO2界面位点用于高效催化CO2加氢制甲醇

Cu/ZrO₂ catalysts have demonstrated effective in hydrogenation of CO₂ to methanol, during which the Cu-ZrO₂ interface plays a key role. Thus, maximizing the number of Cu-ZrO₂ interface active sites is an effective strategy to develop ideal catalysts. This can be achieved by controlling the active metal size and employing porous supports. Metal-organic frameworks (MOFs) are valid candidates because of their rich, open-framework structures and tunable compositions. UiO-66 is a rigid metal-organic skeleton material with excellent hydrothermal and chemical stability that comprises Zr as the metal center and terephthalic acid (H₂BDC) as the organic ligand. Herein, porous UiO-66 was chosen as the ZrO₂ precursor, which can confine Cu nanoparticles within its pores/defects. As a result, we constructed a Cu-ZrO₂ nanocomposite catalyst with high activity for CO₂ hydrogenation to methanol. Many active interfaces could form when the catalysts were calcined at a moderate temperature, and the active interface was optimized by adjusting the calcination temperature and active metal size. Furthermore, the Cu-ZrO₂ interface remained after CO₂ hydrogenation to methanol, as confirmed by transmission electron microscopy (TEM), demonstrating the stability of the active interface. The catalyst structure and hydrogenation activity were influenced by the content of the active component and the calcination temperature; therefore, these parameters were explored to obtain an optimized catalyst. At 280 ℃ and 4.5 MPa, the optimized CZ-0.5-400 catalyst gave the highest methanol turnover frequency (TOF) of 13.4 h^-1 with a methanol space-time yield (STY) of 587.8 g·kg^-1·h^-1 (calculated per kilogram of catalyst, the same below), a CO₂ conversion of 12.6%, and a methanol selectivity of 62.4%. In situ diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS) of CO adsorption over the optimized catalyst revealed a predominant, unreducible Cu⁺ species that was also identified by X-ray photoelectron spectroscopy (XPS). The favorable activity observed was due to this abundant Cu⁺ species coming from the Cu⁺-ZrO₂ interface that served as the methanol synthesis active center and acted as a bridge for transporting hydrogen from the active Cu species to ZrO₂. In addition, the oxygen vacancies of ZrO₂ promoted the adsorption and activation of CO₂. These vacancies and Cu⁺ trapped in the ZrO₂ lattice are the active sites for methanol synthesis from CO₂ hydrogenation. The X-ray diffraction (XRD) patterns of the catalyst before and after reaction revealed the stability of its structure, which was further verified by time-on-stream (TOS) tests. Furthermore, in situ DRIFTS and temperature-programmed surface reaction-mass spectroscopy (TPSR-MS) revealed the reaction mechanism of CO₂ hydrogenation to methanol, which followed an HCOO-intermediated pathway.     

PRODUCTION OF LIGHT ALKENES FROM CO AND/OR CO_2 HYDROGENATION OVER K-Fe-MnO/SILICALITE-2 CATALYST

High selectivity to light alkenes can be achieved from CO and CO_2hydrogenation over K-Fe-MnO/Si-2 catalyst.The alkene selectivity isinsensitive to reaction temperature for CO hydrogenation,while apparentlyincreases for CO_2 hydrogenation with raising reaction temperature.An increasein alkene selectivity is observed for both CO and CO_2 hydrogenation with GHSVrising,While a decrease with the elevation of reaction pressure for both CO/H_2and CO_2/H_2 reaction.A two-step mechanism is suggested forCO_2 hydrogenation to form hydrocarbons,by which the variations incontributions of CO and HC as products of CO_2/H_2 reaction with change ofreaction temperature,GHSV and pressure are explained.Moreover,thecatalyst is favorable for selective production of light olefins,which can alsoconcern the slightly secondary reactions of light olefins to some extent.     

CO2＋H2制含氧化合物的研究

作为自然界中含有丰富碳源的CO_2,经过催化加氢制含氧化合物的研究,近年来为人们所关注,特别是CO_2加氢制甲醇.从CO_2出发制含氧化合物其前景是诱人的,则可利用碳和氧得到化学品,二则减少了自然界中的CO_2含量,有益于环境保护.本文对Cu-Zn系和Rh-V系催化剂进行初步考察.