Analytical applications of the reaction of thorium with benzenephosphonic acid

Benzenephosphonic acid quantitatively precipitates thorium as Th(C₆H₅PO₃)₂·3H₂O at pH values as low as 0.5. The compound may be dried at 140° to 180° C and weighed, as a gravimetric means of determining thorium. On ignition, Th (C₂H₅PO₃)₂ 3 H₂O undergoes decomposition at 240° to 300° C to form Th(C₆H₅PO₃)₂·2H₂O, at 450° to 650° C to form Th(HPO₄)₂·2H₂O and finally at 800° to 1000° C to form Th(HPO₄)₂. The latter compound is stable to 1200° C.Potentiometrically (pK₁' = 0.91, pK₂' = 6.41) and spectrophotometrically (pK₁' = 0.96, pK₂' = 6.51) determined pK' values are reported. Absorption spectra of C₆H₅PO₃H₂, C₆H₅PO₃H^- and C₆H₅PO₃^-2 are reported. The solubility of Th (C₆H₅PO₃)₂·3H₂O was studied as a function of pH and the average value of the solubility product (K_sp = 4s³) was found to be 3.24·10^-31.     

(Liquid + liquid) equilibria of ternary and quaternary systems with two hydrocarbons, an alcohol, and water at 303.15 K. Systems containing cyclohexane, benzene, ethanol, and water

Tie-line data for the water, ethanol, and cyclohexane [{w₁H₂O + w₂C₂H₅OH + (1−w₁−w₂)C₆H₁₂}] ternary system, where w is the mass fraction, was investigated at T=303.15 K. A quaternary system containing these three compounds and benzene {w₁C₂H₅OH + w₂C₆H₆ + w₃C₆H₁₂ + (1−w₁−w₂−w₃)H₂O} was also studied at the same temperature, while data on its other two partially miscible ternary systems were taken from the literature [the fourth {w₁C₂H₅OH + w₂C₆H₆ + (1−w₁−w₂)C₆H₁₂} is not partially miscible]. From our experimental results we conclude that this quaternary system presents a very small water tolerance and that phase separation could produce a considerable loss of C₂H₅OH drawn into the aqueous phase. On the other hand, the results also show that the aqueous phase generally contains a higher concentration of C₆H₆ than of C₆H₁₂. A comparison with other similar quaternary systems investigated in our laboratory was also made. The ternary experimental results were correlated with the UNIQUAC equation, and predicted with the UNIFAC group contribution method. As previously, the equilibrium data of the three ternary systems (including those taken from the literature) were used to determine interaction parameters for the UNIQUAC equation. These parameters were then averaged in order to predict equilibrium data of this quaternary system. The UNIFAC method was also used with the same purpose. The UNIQUAC equation appears to be more accurate than the UNIFAC method for this ternary system. However, this last model is slightly better for the quaternary system, as can be seen from the values of both residuals.     

The synthesis of functional derivatives of the [1-CB9H10] anion by Brellochs reaction

Reactions of decaborane with various aldehydes in alkaline media were studied. The reactions with HCOH and 2-MeOC₆H₄CHO give the corresponding arachno-carboranes [6-R-arachno-CB₉H₁₃]⁻ (R = H, C₆H₄-2-OMe), whereas the reactions with C₆H₅CHO, 4-BrC₆H₄CHO, 4-MeCONHC₆H₄CHO, and 2-SC₄H₃CHO result in the nido-carboranes [6-R-nido-CB₉H₁₁]⁻ (R = C₆H₅, C₆H₄-4-Br, C₆H₄-4-NHCOMe, 2-SC₄H₃). Both the arachno- and nido-carboranes can be easily oxidized with elemental iodine in an alkaline aqueous solution giving the corresponding closo-derivatives [2-R-closo-2-CB₉H₉]⁻. These closo-2-isomers, under heating in solution, undergo rearrangement to more thermodynamically favorable closo-1-isomers [1-R-closo-1-CB₉H₉]⁻. The structure of (Bu₄N)[1-(4-BrC₆H₄)-1-CB₉H₉] was determined using single crystal X-ray diffraction.     

Two-dimensional composition diagram of the Al(OH)3-dien-HFaq.-ethanol system: Evidence of a new tetrahedral (Al4F18) polyanion

Six domains appear in the 2D composition diagram of the Al(OH)₃-dien-HF_aq.-ethanol system at 190 °C and [Al³⁺] = 1 mol L⁻¹ under microwave heating. Four organic-inorganic fluorides crystallise: [H₃dien]·(AlF₆) (P2₁/c, Z = 4), [H₃dien]₂·(AlF₅(H₂O))₃·2H₂O (P2₁/n, Z = 4), [H₃dien]·(AlF₆)·2H₂O, which was previously known, and [H₃dien]₂·(Al₄F₁₈) (C2/c, Z = 4). A new (Al₄F₁₈)⁶⁻ polyanion, which results from the tetrahedral association of four AlF₆ octahedra linked by corners, is evidenced in [H₃dien]₂·(Al₄F₁₈).     

Synthesis and pyrolysis of silicon and tin containing poly(2,2′-dioxy-1,1′-biphenoxy-phosphazenes)

The polyphosphazene {[NP(O₂C₁₂H₈)]_0.5[NP(OC₆H₄Br)₂]_0.5}_n (1) [(O₂C₁₂H₈) = 2,2′-dioxy-1,1′-biphenyl] that, as an strictly alternating copolymer, can be considered nearly as the homopolymer [NP(O₂C₁₂H₈)NP(OC₆H₄Br)₂]_n, was reacted first with ^tBuLi in THF at −78 °C to give the intermediate [NP(O₂C₁₂H₈)NP(OC₆H₄Li)₂]_n (2) and subsequently with the chlorosilanes SiMe₃Cl and SiMe₂(C₆H₅)Cl or with the chlorostannane SnMe₃Cl, to obtain the new polyphosphazenes {(NP[O₂C₁₂H₈])_0.5[NP(OC₆H₄SiMe₃)₂]_0.5−x[NP(OC₆H₅)(OC₆H₄SiMe₃)]_x}_n (3a) (x = 0.15-0.5), {(NP[O₂C₁₂H₈])_0.5[N(POC₆H₄SiMe₂Ph)₂]_0.2[NP(OC₆H₅)(OC₆H₄SiMe₂Ph)]_0.3}_n (3b), and {(NP[O₂C₁₂H₈])_0.5[NP(OC₆H₅)(OC₆H₄SnMe₃)]_0.5}_n (4), having a very regular distribution of the silicon or tin organometallic sites along the chains. The pyrolysis of the polymers in air at 800 °C gave microcrystalline residues (characterized by IR, XRD, SEM and TEM-EDXA) consisting on phases of SiO₂ · P₂O₅ · P₂O_7.9 · SiP₂O₇, or, in the case of the tin derivative, almost pure SnP₂O₇. The results indicate that, while part of the Si content is lost during the pyrolysis, almost all the tin in the original polymer was incorporated to the final residue.     

Synthesis of phosphate-type fluorocarbon-hydrocarbon hybrid surfactants and their adsorption onto calcium hydroxyapatite

Five novel phosphate-type hybrid surfactants, C_mF_2m+1C₆H₄CH[OPO₂(OC₆H₅)Na]C_nH_2n+1 (FmPHnPPhNa: m = 4, 6, 8; n = 3, 5; C₆H₄ = p-phenylene, C₆H₅ = phenyl), have been synthesized. When compared with sulfate-type hybrid surfactants, C_mF_2m+1C₆H₄CH(OSO₃Na)C_nH_2n+1 (C₆H₄ = p-phenylene), the new hybrid surfactants are found to have comparable abilities to lower surface tension of water. The critical micelle concentrations of FmPHnPPhNa follow Klevens rule and their occupied areas per molecule increase with increasing m and n. Calcium hydroxyapatite (CaHAp) pellets modified with FmPH3PPhNa gives high hydrophobic and lipophobic surfaces. The hybrid surfactants are expected as new dental reagents for oral hygiene.     

Conservation of [(C2H4NH3)3N]2·(ZrF7)2·H2O layers during the topotactic dehydration of [(C2H4NH3)3N]2·(ZrF7)2·9H2O

Tren amine cations [(C₂H₄NH₃)₃N]³⁺ and zirconate or tantalate anions adopt a ternary symmetry in two hydrates, [H₃tren]₂·(ZrF₇)₂·9H₂O and [H₃tren]₆·(ZrF₇)₂·(TaOF₆)₄·3H₂O, which crystallise in R32 space group with a_H = 8.871 (2) Å, c_H = 38.16 (1) Å and a_H = 8.758 (2) Å, c_H = 30.112 (9) Å, respectively. Similar [H₃tren]₂·(MX₇)₂·H₂O (M = Zr, Ta; X = F, O) sheets are found in both structures; they are separated by a water layer (O_w(2)-O_w(3)) in [H₃tren]₂·(ZrF₇)₂·9H₂O. Dehydration of [H₃tren]₂·(ZrF₇)₂·9H₂O starts at room temperature and ends at 90 °C to give [H₃tren]₂·(ZrF₇)₂·H₂O. [H₃tren]₂·(ZrF₇)₂·H₂O layers remain probably unchanged during this dehydration and the existence of one intermediate [H₃tren]₂·(ZrF₇)₂·3H₂O hydrate is assumed. O_w(1) molecules are tightly hydrogen bonded with -NH₃⁺ groups and decomposition of [H₃tren]₂·(ZrF₇)₂·H₂O occurs from 210 °C to 500 °C to give successively [H₃tren]₂·(ZrF₆)·(Zr₂F₁₂) (285 °C), an intermediate unknown phase (320 °C) and ZrF₄.     

A new approach to the synthesis of oligomers. Application to the synthesis of p-phenylene thioether wires

Oligothioethers 4-RC₆H₄(SC₆H₄-4)_nX (n = 1-3; X = Br, I; R = NO₂; X = Br; R = MeO. n = 1 and 2; X = I; R = MeO. n = 4; X = Br; R = NO₂) have been prepared through a process involving (i) palladium-catalyzed C-S coupling between 4-RC₆H₄(SC₆H₄-4)_n−1I and 4-BrC₆H₄SH to give 4-RC₆H₄(SC₆H₄-4)_nBr and (ii) copper-catalyzed replacement of Br by I.     

N-arylammonio- and N-pyridinium-substituted derivatives of dodecahydro-closo-dodecaborate(2-)

We report two methods for preparing N-arylammonio, N-pyridyl and N-arylamino dodecaborates: heating of the tetrabutylammonium salt of dodecahydro-closo-dodecaborate(2-) with aryl and pyridyl amines, or nucleophilic attack of [closo-B₁₂H₁₁NH₂]²⁻ on a strongly deactivated aromatic system. With aryl amines we obtained [1-closo-B₁₂H₁₁N(R¹)₂C₆H₅]⁻ (R¹ = H, CH₃). With 4-(dimethylamino)pyridine, [1-closo-(B₁₂H₁₁NC₅H₄)-4-N(CH₃)₂]⁻, with a bond between the boron and the pyridinium nitrogen, was obtained. A presumable mechanism for this kind of reactions is reported. By nucleophilic substitution, two products, [1-closo-(B₁₂H₁₁NHC₆H₃)-3,4-(CN)₂]²⁻ and [1-closo-(B₁₂H₁₁NHC₆H₂)-2-(NO₂)-4,5-(CN)₂]²⁻, were formed with 4-nitrophthalonitrile and 1-chloro-2,4-dinitrobenzene gave [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻. For [1-closo-B₁₂H₁₁N(CH₃)₂C₆H₅]⁻ and [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻ single crystal X-ray structures were obtained.     

Dynamic H NMR study of 4-methylphenoxyimidoyl azides: conformational or configurational isomerisation?

Dynamic ¹H NMR (500 MHz) investigation of 4-methylphenoxyimidoyl azides (4-CH₃-C₆H₄-O-CN-Y)-N₃, Y=4-CH₃-C₆H₄-SO₂-, 4-Br-C₆H₄-SO₂-, C₆H₅SO₂-, CH₃-SO₂-, -CN in acetone-d₆ at temperature range of 195-280 K is reported. The observed free energy barrier (almost 12 kcal mol⁻¹) is attributed to conformational isomerisation about the N-S bond for Y=4-CH₃-C₆H₄-SO₂-, 4-Br-C₆H₄-SO₂-, C₆H₅SO₂-, CH₃-SO₂- and (almost 14 kcal mol⁻¹) to configurational isomerisation (E/Z) about CN bond for Y=-CN.     

Synthesis and characterizations of N,N-bis(diphenylphosphino)ethylaniline derivatives and X-ray crystal structure of palladium (II), platinum (II) complexes

N,N-Bis(diphenylphosphino)ethylaniline compounds, [Ph₂P]₂N-C₆H₄-C₂H₅, with ethyl groups at the ortho- and para-positions have been synthesized. Oxidation of the aminophosphines with hydrogen peroxide, elemental sulfur and selenium gave the corresponding oxides, sulfides and selenides [Ph₂P(E)]₂N-C₆H₄-C₂H₅ (E = O, S, Se). Complexes [MCl₂{(Ph₂P)₂N-C₆H₄-(C₂H₅)}] (M = Pd, Pt) and [Cu{(Ph₂P)₂N-C₆H₄-C₂H₅}₂]PF₆ were obtained by the reaction of N,N-bis(diphenylphosphino)ethylaniline with [MCl₂(COD)] (M = Pd, Pt) and [Cu(MeCN)₄]PF₆. The new compounds were characterized by NMR, IR spectroscopy and microanalysis. In addition, representative solid-state structures of the palladium and platinum complexes were determined using single crystal X-ray diffraction analyses.     

Characterization of an aluminium(III)–citrate species by means of ion chromatography with inductively coupled plasma-atomic emission spectrometry detection

The aluminium(III)–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O was characterized using anion exchange chromatography on-line coupled with the element specific ICP-AES detector. Time-dependent monitoring of individual species in aqueous solution at different temperatures gave information about the species stability and the decomposition pathway. The aluminium–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O disintegrated via an unknown intermediary Al(III)–citrate species from which the thermodynamically stable complex [Al₃(C₆H₄O₇)₃(OH)(H₂O)]⁴⁻ was formed. The activation energy for the decomposition reaction and the pre-exponential factor were determinated to be E_a = 81.95 kJ mol⁻¹ and A = 3.62 × 10¹³ s⁻¹.     

Excess molar enthalpies of the ternary mixtures (1-hexene + tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether) at the temperature 298.15 K

Microcalorimetric measurements of excess enthalpies at the temperature T = 298.15 K are reported for the binary mixture, (x₁C₆H₁₂ + x₂C₄H₈O) and the two ternary mixtures {x₁C₆H₁₂ + x₂(C₄H₈O or C₅H₁₀O) + x₃(C₅H₁₂O)}. Smooth representations of the results are presented and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. It is shown that good estimates of the ternary enthalpies can be obtained from the Liebermann and Fried model, using only the physical properties of the components and their binary mixtures.     

Selective anion-exchange intercalation of isomeric benzoate anions into the layered double hydroxide [LiAl2(OH)6]Cl·H2O

All the geometric isomers of the benzoate derivatives, XC₆H₄CO₂⁻ (X=F, Cl, Br, OH, OCH₃, NO₂, CO₂CH₃, NH₂, N(CH₃)₂) can be intercalated into the layered double hydroxide [LiAl₂(OH)₆]Cl·H₂O in 50% (v/v) water/ethanol solution at 80 °C to give fully anion-exchanged first stage intercalation compounds [LiAl₂(OH)₆]G·yH₂O (G=a substituted benzoate). The observed interlayer separations of the intercalates vary from 14.3 Å for [LiAl₂(OH)₆](4-nitrobenzoate)·2H₂O to 20.6 Å for [LiAl₂(OH)₆](3-dimethylaminobenzoate)·3H₂O. Competitive intercalation studies using mixtures of isomeric benzoates showed that the 4-isomers and 2-isomers are the most and the least preferred anions, respectively. Comparing the calculated dipole moments of the anions with the observed isomeric intercalation preferences suggests that dipole moment may be a good general index for the preference; however, it should be remembered that the bulkiness and electronegativity of the other substituent could be very important factors that affect the preferential intercalation.     

Synthesis and characterization of new strontium 4-carboxyphenylphosphonates

Several new strontium 4-carboxyphenylphosphonates, i.e., two modifications of Sr(HOOCC₆H₄PO₃H)₂, SrH(OOCC₆H₄PO₃)·H₂O, Sr₃(OOCC₆H₄PO₃)₂·4H₂O and Sr₃(OOCC₆H₄PO₃)₂·5.7H₂O were prepared and characterized by elemental analysis, thermogravimetry, X-ray powder diffraction and infrared spectroscopy. It was found that the compositions of these compounds depend on the acidity of the reaction medium. In addition, the presented compounds are interconvertible in dependence on pH. The position of the acid hydrogen atom in SrH(OOCC₆H₄PO₃)·H₂O was determined from the IR spectra of the studied compounds.The structure of the β modification of Sr(HOOCC₆H₄PO₃H)₂ was solved from its X-ray powder diffraction pattern using an ab initio method (the FOX program) with subsequent Rietveld refinement in the FULLPROF program. The compound is monoclinic, with the space group P2₁/c (No. 14), a=49.88(2), b=7.867(2), c=5.602(3) Å, β=128.68(2)°, and Z=4. It has a one-dimensional structure with an inorganic part built of SrO₈ distorted tetragonal antiprisms.     

Effect of ring substituents on crystal packing and H-bonding in a series of halobis(phen)copper(II) arylphosphonic acid complexes

The synthesis and crystal structures of five new analogues of the supramolecular copper(II) organophosphonate [Cu^II(phen)₂Cl][(C₆H₅PO(OH)₂)((OH)O₂PC₆H₅)] (1) are presented. The structures contain substituted phenylphosphonic acids, and are of the general formula [Cu^II(phen)₂Cl][(XPO(OH)₂)((OH)O₂PX)] · Z, where X = o-CH₃(C₆H₅) (2); X = p-CH₃(C₆H₅), Z = H₂O · 2CH₃CH₂OH (4); X = o-NO₂(C₆H₅), m-NO₂(C₆H₅) (5); X = m-NO₂(C₆H₅) (6); X = C₁₀H₇ (7).     

The synthesis, structure and ethene polymerization activity of octahedral heteroligated (salicylaldiminato)(β-enaminoketonato)titanium complexes: The X-ray crystal structure of {3-Bu-2-(O)C6H3CHN(Ph)}{(Ph)NC(Me)C(H)C(Me)O}TiCl2

Treatment of the mono(salicylaldiminato)titanium complexes {3-Bu^t-2-(O)C₆H₃CHN(Ar)}TiCl₃(THF) (Ar = C₆H₅, 2,4,6-Me₃C₆H₂ or C₆F₅) with the potassium β-enaminoketonates (C₆H₅)NC(CH₃)C(H)C(R)OK (R = CH₃, CF₃) yielded the first examples of heteroligated (salicylaldiminato) (β-enaminoketonato)titanium dichloride complexes. The complex {3-Bu^t-2-(O)C₆H₃CHN(C₆H₅)}{(C₆H₅)NC(CH₃)C(H)C(CH₃)O}TiCl₂ was structurally characterized by X-ray diffraction and has an orientation with trans-O,O,cis-Cl,Cl, cis-N,N distorted octahedral geometry. These complexes polymerize ethene when activated with MAO; the highest productivity, 5650 kg PE (mol metal)⁻¹ h⁻¹ atm⁻¹, was afforded by {3-Bu^t-2-(O)C₆H₃CHN(C₆F₅)}{(C₆H₅)NC(CH₃)C(H)C(CF₃)O}TiCl₂ at 60 °C.     

The phonon-assisted proton transfer between hydrazinium cations in (N2H5)2HMF6·2H2O (M∈{Ga, Al, Fe}) type compounds. FT IR and quantum theoretical study

FT IR spectra of a series of compounds with a general formula (N₂H₅)₂HMF₆·2H₂O (where M∈{Ga, Al, Fe}) were recorded at variable temperatures (from ∼100 to 300 K, at 10 K intervals). The appearance of the spectral region of ν(N-N) modes due to hydrazinium cations further supports the conclusions regarding the N₂H₅⁺?H⁺?N₂H₅⁺ hydrogen bond potential well based on Raman spectroscopic data [J. Raman Spectrosc. 28 (1997) 315]. The appearance of two bands corresponding to the ν(N-N) modes in the low temperature FT IR spectra that merge into one upon heating is a clear evidence of a symmetric potential well through which a phonon-assisted proton transfer (PAPT) occurs at higher temperatures. Ab initio MP2/6-311++G(2d,p) quantum chemical study of the proton transfer potential within the N₂H₅⁺?H⁺?N₂H₅⁺ cluster confirmed its double-minimum character. The first-order saddle point found on the MP2/6-311++G(2d,p) potential energy hypersurface corresponds to a centrosymmetric structure (C_2h symmetry), with the proton placed at the inversion center. The potential energy curve along the tunnelling coordinate was calculated by the intrinsic reaction coordinate (IRC) methodology, leading to an adiabatic PT barrier height of 3.94 kcal mol⁻¹ and a tunneling rate of 1.98 s⁻¹. The corresponding MP4(SDTQ)/6-311++G(2d,p)//MP2/6-311++G(2d,p) value of the adiabatic PT barrier height is 4.26 kcal mol⁻¹.     

Synthesis, crystal structures and in vitro antitumor activities of some arylantimony derivatives of analogues of demethylcantharimide

A series of novel arylantimony derivatives of analogues of demethylcantharimide with the formulae Ar_nSbL_(5−n) and Ar_nSbL^′_(5−n)(LH=N-hydroxy-demethyldehydrogencantharimide, L^′H=N-hydroxy-demethylcantharimide, n=3, 4; ArC₆H₅, 4-CH₃C₆H₄, 3-CH₃C₆H₄, 2-CH₃C₆H₄, 4-ClC₆H₄, 4-FC₆H₄) were synthesized and characterized by elemental analysis, IR, ¹H NMR and mass spectroscopy. The crystal structures of (C₆H₅)₄SbL, (4-CH₃C₆H₄)₃SbL₂ and (3-CH₃C₆H₄)₃SbL^′₂ were determined by X-ray diffraction. The in vitro antitumor activities of all compounds against six cancer cells are reported.     

H2S sensing properties of nanocrystalline Sr2FeO.6NiO.4MoO6 thick film prepared by sol-gel citrate method

Nanocrystalline Sr₂FeMoO₆ (SFMO) belonging to the group of double perovskite oxides, was prepared by the sol-gel citrate method. The structural and microstructural characterization has been carried out with the help of X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. XRD of Sr₂Fe_1−xNi_xMoO₆ (SFNMO) shows the formation of solid solution with average grain size of about 40 nm. A comparative study of gas sensing behaviour of Sr₂FeMoO₆ and Sr₂Fe_1−xNi_xMoO₆ with reducing gases like hydrogen sulfide (H₂S), liquid petroleum gas (LPG), hydrogen (H₂), ethanol (C₂H₅OH) and carbon monoxide (CO) were also discussed. The sensitivity is calculated by measuring the change the resistance of the sensor material in the presence of gas. Among the different composition of x (x = 0.2, 0.3, 0.4, 0.5), Sr₂Fe_0.6Ni_0.4MoO₆ (x = 0.4) shows better response to H₂S gas at 260 °C. Incorporation of palladium (Pd) improves the gas response, selectivity, response time and reduced the operating temperature from 260 to 220 °C for H₂S gas.