Chemical Degradation of Mercury Alkyls Mediated by Copper Selenide Nanosheets

Methylation and demethylation of mercury compounds are two important competing processes that control the net production of highly toxic mercury alkyls, methylmercury (MeHg⁺) and dimethylmercury (Me₂Hg), in environment. Although the microbial and the photochemical methylation and demethylation processes are well studied in recent years but the chemical methylation and demethylation processes have not been studied well. Herein, we report for the first time that the CuSe nanosheet has remarkable ability to activate the highly inert Hg?C bonds of various MeHg⁺ and Me₂Hg compounds at room temperature (21 °C). It facilitates the conversion of MeHg⁺ into Me₂Hg in the absence of any proton donors. Whereas, in the presence of any proton source, it has unique ability to degrade MeHg⁺ into CH₄ and inorganic mercury (Hg²⁺). Detailed studies revealed that the relatively fast Hg?C bond cleavage was observed in case of MeHgSPh or MeHgI in comparison to MeHgCl, indicating that the Hg?C bond in MeHgCl is relatively inert in nature. On the other hand, the Hg?C bond in Me₂Hg is considered to be exceedingly inert and, thus, difficult to cleave at room temperature. However, CuSe nanosheets showed unique ability to degrade Me₂Hg into CH₄ and Hg²⁺, via the formation of MeHg⁺, under acidic conditions at room temperature. DFT calculations revealed that the Hg?C bond activation occurs through adsorption on the surface of (100)‐faceted CuSe nanosheets.     

Analytical speciation of mercury in fish tissues by reversed phase liquid chromatography-inductively coupled plasma mass spectrometry with Bi as internal standard

In this work, the quantification of two mercury species (Hg²⁺ and CH₃Hg⁺) in fish tissues has been revisited. The originality of our approach relies on the use of Bi³⁺ as internal standard (IS) and on the modification of typical extraction conditions. The IS (125 μl, 1000 μg l⁻¹ Bi³⁺) was added to the aliquot of fresh fish tissue (400-500 mg). A high-speed blender and ultrasound-assisted homogenization/extraction was carried out in the presence of perchloric acid (1.5 ml, 0.6 mol l⁻¹), l-cysteine (500 μl, 0.75 mol l⁻¹) and 500 μl toluene:methanol (1:1). Perchloric acid was used for protein denaturation and precipitation, toluene helped to destroy lipid structures potentially sequestering CH₃Hg⁺, l-cysteine was used to form water-soluble complexes with Bi³⁺, Hg²⁺ and CH₃Hg⁺. The excess of perchloric acid was eliminated by addition of potassium hydroxide (pH 5 with acetic acid). The obtained extract, was diluted with the mobile phase (1:1) and introduced (20 μl) to the reversed phase HPLC-ICP-MS system. The separation was achieved by isocratic elution (2.5 mmol l⁻¹ cysteine, 12.5 mmol l⁻¹ (NH₄)₂HPO₄, 0.05% triethylamine, pH 7.0:methanol (96:4)) at a flow rate 0.6 ml min⁻¹. Column effluent was on-line introduced to ICP-MS for specific detection of ²⁰²Hg, ²⁰⁰Hg and ²⁰⁹Bi. Analytical signal was defined as the ratio between ²⁰²Hg/²⁰⁹Bi peak areas. The detection limits evaluated for Hg²⁺ and CH₃Hg⁺ were 0.8 and 0.7 μg l⁻¹. Recovery of the procedure, calculated as the sum of species concentrations found in the sample with respect to total ICP-MS-determined Hg was 91.9% for king mackerel muscle and 89.5% for red snapper liver. In the standard addition experiments, the recovery results were 98.9% for Hg²⁺ and 100.6% for CH₃Hg⁺. It should be stressed that the use of Bi³⁺ as IS enabled to improve analytical performance by compensating for incomplete extraction and for imprecision of sample handling during relatively non-rigorous protocol.     

Improvement of analytical performances for mercury speciation by on-line derivatization, cryofocussing and atomic fluorescence spectrometry

A modified automated on-line hyphenated system for simultaneous inorganic ionic mercury (Hg²⁺) and monomethylmercury (MeHg⁺) analysis by hydride generation (HG) or ethylation (Eth), cryofocussing, gas chromatography (GC) separation and atomic fluorescence spectrometry (AFS) detection has been improved. Both derivatization methods are investigated with respect to the chromatographic and analytical performances. They can be both affected by interferences when the AFS detection system is used. Water vapor removal using a soda lime moisture trap improves significantly the chromatographic performances, the reproducibility and the detection limits for Hg²⁺ and MeHg⁺ analyzed with both methods. For ethylation (Eth) derivatization, a scattering interference generated from low-quality ethylation reagent has also been eliminated. For HG, improved detection limits are 0.13 ng l⁻¹ and 0.01 ng l⁻¹ for Hg²⁺ and MeHg⁺, respectively (0.1 l water sample), and reproducibility are 5% for Hg²⁺ (20 ng l⁻¹) and MeHg⁺ (5 ng l⁻¹). Improved detection limits for Eth are 0.22 ng g⁻¹ for Hg²⁺ and 0.02 ng g⁻¹ for MeHg⁺ (1 g dry sediment sample) and the reproducibility are 5-6% for Hg²⁺ and MeHg⁺ (1-2 ng g⁻¹).     

Sequential cloud point extraction for the speciation of mercury in seafood by inductively coupled plasma optical emission spectrometry

A novel nonchromatographic speciation technique for the speciation of mercury by sequential cloud point extraction (CPE) combined with inductively coupled plasma optical emission spectrometry (ICP-OES) was developed. The method based on Hg²⁺ was complexed with I⁻ to form HgI₄²⁻, and the HgI₄²⁻ reacted with the methyl green (MG) cation to form hydrophobic ion-associated complex, and the ion-associated complex was then extracted into the surfactant-rich phase of the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114), which are subsequently separated from methylmercury (MeHg⁺) in the initial solution by centrifugation. The surfactant-rich phase containing Hg(II) was diluted with 0.5 mol L^− 1 HNO₃ for ICP-OES determination. The supernatant is also subjected to the similar CPE procedure for the preconcentration of MeHg⁺ by the addition of a chelating agent, ammonium pyrrolidine dithiocarbamate (APDC), in order to form water-insolvable complex with MeHg⁺. The MeHg⁺ in the micelles was directly analyzed after disposal as describe above. Under the optimized conditions, the extraction efficiency was 93.5% for Hg(II) and 51.5% for MeHg⁺ with the enrichment factor of 18.7 for Hg(II) and 10.3 for MeHg⁺, respectively. The limits of detection (LODs) were 56.3 ng L^− 1 for Hg(II) and 94.6 ng L^− 1 for MeHg⁺ (as Hg) with the relative standard deviations (RSDs) of 3.6% for Hg(II) and 4.5% for MeHg⁺ (C = 10 μg L⁻¹, n = 7), respectively. The developed technique was applied to the speciation of mercury in real seafood samples and the recoveries for spiked samples were found to be in the range of 93.2–108.7%. For validation, a certified reference material of DORM-2 (dogfish muscle) was analyzed and the determined values are in good agreement with the certified values.     

Production of artifact methylmercury during the analysis of certified reference sediments: use of ionic exchange in the sample treatment step to minimise the problem

Production of artifact methylmercury (MeHg⁺) during the analysis of two certified reference sediments, CRM-580 and IAEA-405, was investigated. Leaching of the analyte from the solid sample was achieved by ultrasound assisted acidic extraction. The aqueous leachate was either ethylated (NaBEt₄) or phenylated (NaBPh₄) using acetic/acetate or citric/citrate to buffer the solution. Preconcentration of the volatile compounds was carried out by extraction with an organic solvent (n-hexane) or solid phase microextraction (SPME). MeHg⁺ was finally separated and detected by gas chromatography with atomic emission or mass spectrometry detection (GC-MIP-AED or GC-MS). In all the cases the concentrations obtained for MeHg⁺ in the CRM-580 were significantly higher than the certified value. For the IAEA-405, however, the MeHg⁺ concentration found was always statistically indistinguishable from the certified value. Experiments were also conducted with synthetic samples, such as aqueous mixtures of MeHg⁺ and inorganic mercury (Hg²⁺) or silica-gel spiked with both compounds. The methylation rates found (defined as the percentage of Hg²⁺ present in the sample which methylates to give artifact MeHg⁺) ranged from not observable (in certain synthetic aqueous mixtures) to 0.57% (analysis of CRM-580 under certain conditions). As the amount of Hg²⁺ available in the sample seems to be the main factor controlling the magnitude of the artifact, several experiments were conducted using an ionic exchange resin (Dowex M-41) in order to minimise the concentration of this chemical in the reaction medium. First, a hydrochloric leachate of the sample was passed through a microcolumn packed with the exchanger. Second, the resin was mixed with the sample prior to extraction with HCl. In both cases, the predominant Hg²⁺ species, HgCl₄²⁻, was adsorbed on the resin, whereas MeHg⁺, mainly as MeHgCl, remained in solution. Following the second option, a new method to analyse MeHg⁺ in conflictive matrices like certain sediments was proposed. This approach produced better results for the CRM-580, but a MeHg⁺ concentration slightly, but statistically significant, higher than the reference value was still obtained.     

Determination of methylmercury and inorganic mercury by coupling short-column ion chromatographic separation,on-line photocatalyst-assisted vapor generation,and inductively coupled plasma mass spectrometry

We have combined short-column ion chromatographic separation and on-line photocatalyst-assisted vapor generation (VG) techniques with inductively coupled plasma mass spectrometry to develop a simple and sensitive hyphenated method for the determination of aqueous Hg²⁺ and MeHg⁺ species. The separation of Hg²⁺ and MeHg⁺ was accomplished on a cation-exchange guard column using a glutathione (GSH)-containing eluent. To achieve optimal chromatographic separation and signal intensities, we investigated the influence of several of the operating parameters of the chromatographic and photocatalyst-assisted VG systems. Under the optimized conditions of VG process, the shortcomings of conventional SnCl₂-based VG techniques for the vaporization of MeHg⁺ was overcome; comparing to the concentric nebulizer-ICP-MS system, the analytical sensitivity of ICP-MS toward the detection of Hg²⁺ and MeHg⁺ were also improved to 25- and 7-fold, respectively. With the use of our established HPLC–UV/nano-TiO₂–ICP-MS system, the precision for each analyte, based on three replicate injections of 2 ng/mL samples of each species, was better than 15% RSD. This hyphenated method also provided excellent detection limits—0.1 and 0.03 ng/mL for Hg²⁺ and MeHg⁺, respectively. A series of validation experiments—analysis of the NIST 2672a Standard Urine Reference Material and other urine samples—confirmed further that our proposed method could be applied satisfactorily to the determination of inorganic Hg²⁺ and MeHg⁺ species in real samples.     

Mercury speciation in thawed out and refrozen fish samples by gas chromatography coupled to inductively coupled plasma mass spectrometry and atomic fluorescence spectroscopy

Different sub-sampling procedures were applied for the determination of mercury species (as total mercury Hg, methylmercury MeHg⁺ and inorganic mercury Hg²⁺) in frozen fish meat. Analyses were carried out by two different techniques. After the sample material was pre-treated by microwave digestion, atomic fluorescence spectroscopy (AFS) was used for the determination of total Hg. Speciation analysis was performed according to the following procedure: dissolution of sample material in tetramethylammonium hydroxide (TMAH), derivatisation with sodium tetraethylborate (NaBEt₄), extraction into isooctane and measurement with gas chromatography inductively coupled plasma mass spectrometry (GC-ICPMS) for the identification and quantification of methylmercury (MeHg⁺) and inorganic mercury (Hg²⁺). The concentration range of total Hg measured in the shark fillets is between 0.9 and 3.6 g g^–1 thawed out shark fillet. Speciation analysis leads to 94% Hg present as MeHg⁺. Homogeneity, storage conditions and stability of analytical species and sample materials have great influence on analytical results. Sub-sampling of half-frozen/partly thawed out fish and analysis lead to significantly different concentrations, which are on average a factor of two lower.     

Non-chromatographic screening method for the determination of mercury species. Application to the monitoring of mercury levels in Antarctic samples

A simple non-chromatographic method for the determination of mercury (Hg²⁺), methylmercury (MeHg⁺), dimethylmercury (Me₂Hg), and phenylmercury (PhHg⁺) employing atomic fluorescence spectrometry (AFS) as detection technique was developed. Mercury species showed a particular behavior in the presence of several reagents. In a first stage SnCl₂ was employed for Hg²⁺ determination; in a second step, [Hg²⁺ + PhHg⁺] concentration was determined using SnCl₂ and UV radiation. MeHg⁺ decomposition was prevented adding 2-mercaptoethanol. In a third stage, [Hg²⁺ + PhHg⁺ + MeHg⁺] concentration was determined using K₂S₂O₈. Finally, the four species were determined employing NaBH₄. Reagents concentration and flow rates were optimized. The extraction technique of mercury species involved the use of 2-mercaptoethanol as ion-pair reagent. The limits of detection for Hg²⁺, PhHg⁺, MeHg⁺, and Me₂Hg were 1, 40, 68, and 99 ng L⁻¹ with a relative standard deviation of 1.5, 3.1, 4.7 and 5.8%, respectively. Calibration curve was linear with a correlation factor equal to 0.9995. The method was successfully applied to the determination of the mercury species in two Antarctic materials: IRMM 813 (Adamussium colbecki) and MURST-ISS-A2 (Antarctic Krill).     

Determination of mercury species by the diffusive gradient in thin film technique and liquid chromatography – atomic fluorescence spectrometry after microwave extraction

A diffusive gradient in thin films technique (DGT) was combined with liquid chromatography (LC) and cold vapor atomic fluorescence spectrometry (CV-AFS) for the simultaneous quantification of four mercury species (Hg²⁺, CH₃Hg⁺, C₂H₅Hg⁺, and C₆H₅Hg⁺). After diffusion through an agarose diffusive layer, the mercury species were accumulated in resin gels containing thiol-functionalized ion-exchange resins (Duolite GT73, and Ambersep GT74). A microwave-assisted extraction (MAE) in the presence of 6 M HCl and 5 M HCl (55 °C, 15 min) was used for isolation of mercury species from Ambersep and Duolite resin gels, respectively. The extraction efficiency was higher than 95.0% (RSD 3.5%). The mercury species were separated with a mobile phase containing 6.2% methanol + 0.05% 2-mercaptoethanol + 0.02 M ammonium acetate with a stepwise increase of methanol content up to 80% in the 16th min on a Zorbax C18 reverse phase column. The LODs of DGT–MAE–LC–CV-AFS method were 38 ng L⁻¹ for CH₃Hg⁺, 13 ng L⁻¹ for Hg²⁺, 34 ng L⁻¹ for C₂H₅Hg⁺ and 30 ng L⁻¹ for C₆H₅Hg⁺ for 24 h DGT accumulation at 25 °C.     

Ionic liquids dispersive liquid–liquid microextraction and HPLC‐atomic fluorescence spectrometric determination of mercury species in environmental waters

An ionic liquid (IL) based dispersive liquid–liquid microextraction combined with HPLC hydride generation atomic fluorescence spectrometry method for the preconcentration and determination of mercury species in environmental water samples is described. Four mercury species (MeHg⁺, EtHg⁺, PhHg⁺, and Hg²⁺) were complexed with dithionate and the neutral chelates were extracted into IL drops using dispersive liquid–liquid microextraction. Variables affecting the formation and extraction of mercury dithizonates were optimized. The optimum conditions found were as follows: IL‐type and amount, 0.05 g of 1‐octyl‐3‐methylimidazolium hexafluorophosphate; dispersive solvents type and amount, 500 μL of acetone; pH, 6; extraction time, 2 min; centrifugation time, 12 min; and no sodium chloride addition. Under the optimized conditions, the detection limits of the analytes were 0.031 μg/L for Hg²⁺, 0.016 μg/L for MeHg⁺, 0.024 μg/L for EtHg⁺, and 0.092 μg/L for PhHg⁺, respectively. The repeatability of the method, expressed as RSD, was between 1.4 and 5.2% (n = 10), and the average recoveries for spiked test were 96.9% for Hg²⁺, 90.9% for MeHg⁺, 90.5% for EtHg⁺, 92.3% for PhHg⁺, respectively. The developed method was successfully applied for the speciation of mercury in environmental water samples.     

Multicapillary gas chromatography coupled to inductively coupled plasma-time-of-flight mass spectrometry for rapid mercury speciation analysis

A simple, rapid and accurate method on the basis of multicapillary gas chromatography (MCGC) combined with inductively coupled plasma-time-of-flight mass spectrometry (ICP-TOFMS) was developed for speciation analysis of methylmercury (MeHg⁺) and inorganic mercury (Hg²⁺). The potential of the ICP-TOFMS for transient multi-isotope detection of very short signals (peak width of 0.4 s at half peak height) was evaluated. Two injection systems (purge-and-trap (PTI) and split (SI) injections) were compared in terms of species separation resolution and transient signal profile. Using purge-and-trap injection, after in situ derivatization of the ionic mercury species with sodium tetraethylborate, a baseline separation of MeHg⁺ and Hg²⁺ was achieved within a chromatographic run of <35 s. To correct for matrix-induced ion signal variation and instrumental drift, propylmercury (PrHg⁺) was used as internal standard. Detection limits of 16 and 257 fg g⁻¹ for MeHg⁺ (as Hg) and Hg²⁺, respectively, were achieved. The analytical precision (R.S.D. (%)) for 10 successive injections of a standard mixture containing 10 pg MeHg⁺ (as Hg) and Hg²⁺ was 1.2% for MeHg⁺ and 4.1% for Hg²⁺. The method was validated by analysis of two biological certified reference materials (CRM): a dogfish muscle (DORM-2) and a freeze-dried tuna fish (CRM 464).     

Chemical speciation of MeHg+ and Hg2+ in aqueous solution and HEK cells nuclei by means of DNA interacting fluorogenic probes

Selected new fluorogenic probes that interact in different ways with Hg²⁺ and MeHg⁺ have been prepared and used for the chemical speciation of both cations in aqueous solution as well as in HEK293 cells. The best selective speciation of Hg²⁺ and MeHg⁺ has been achieved by in vitro approaches based on fluorogenic probes supported in cultured cells, due to the particular sensitivity of the HEK293 cells to permeation by Hg²⁺, MeHg⁺ and the fluorogenic probes. In particular, MeHg⁺ was selectively detected in cell nuclei by probe JG45.     

Liquid-phase microextraction with in-drop derivatization combined with microvolume fluorospectrometry for free and hydrolyzed formaldehyde determination in textile samples

A novel approach for preconcentration and speciation analysis of trace amount of mercury from water samples was proposed by dispersive liquid–liquid microextraction (DLLME) coupled to high performance liquid chromatography with diode array detection (HPLC-DAD). Mercury species (Hg²⁺, methylmercury (MeHg⁺) and phenylmercury (PhHg⁺)) were complexed with dithizone (DZ) to form hydrophobic chelates and then extracted into the fine drops of extraction solvent dispersed in the aqueous sample by dispersive solvent. After extraction, the sedimented phase was analyzed by HPLC-DAD. Some important parameters affecting the DLLME such as extraction solvent and dispersive solvent type and volume, concentration of dithizone solution, sample pH, extraction time and salt effect were investigated. Ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF₆]) was found to be a suitable extractant for the chelates. Under the optimized conditions (extraction solvent: 70 μL of ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF₆]); dispersive solvent: 0.75 mL of methanol containing dithizone (0.02%, m/v); pH: 4; extraction time: 5 min; and without salt addition), the limits of detection for Hg²⁺, MeHg⁺ and PhHg⁺ were 0.32, 0.96 and 1.91 μg L⁻¹ (S N⁻¹ = 3) respectively, and the relative standard deviation (RSD) was between 4.1 and 7.3% (n = 5). Three real water samples (tap water, river water and lake water) spiked with mercury species were detected by the developed method, and the relative recoveries obtained for Hg²⁺, MeHg⁺ and PhHg⁺ were 89.6–101.3%, 85.6–102.0% and 81.3–97.6%, respectively.     

Application of stable isotopes in environmental tracer studies – Measurement of monomethylmercury (CH3Hg+) by isotope dilution ICP-MS and detection of species transformation

The monovalent cation monomethylmercury (CH₃Hg⁺) was determined in certified reference materials by isotope dilution GC/ICP-MS and good agreement between measured and certified values has been found. The use of enriched stable isotopes with subsequent detection by ICP-MS is a powerful tracer technique to study dynamic environmental processes. For the first time, it was possible to monitor opposite processes like Hg²⁺ methylation and CH₃Hg⁺ demethylation at ambient tracer levels simultaneously in the same sample. A scheme for calculating the formation of new species from stable tracers used in environmental studies is presented. The sensitivity of stable tracer methods is superior to traditional tracer or radiotracer techniques. In case of mercury methylation, where the generation of a new compound is monitored, the limit of detection depends only on the precision of the isotope ratio measurements and the concentration of the ambient CH₃Hg⁺ already present in the sample, not on the absolute detection limit of the GC/ICP-MS technique used for analyzing CH₃Hg⁺. A 0.25% change in concentration of CH₃Hg⁺ is detectable. In the case of CH₃Hg⁺ demethylation, where the decrease of the added tracer is monitored, the detection limit again depends on the precision of the isotope ratio measurement and the ambient CH₃Hg⁺ concentration but additionally on the amount of the added tracer as well. A decrease in the CH₃Hg⁺ level of 2% of the added tracer is detectable. The validity of the calculation scheme was tested and no difference was found between individually measured isotope concentrations and calculated concentrations from solutions with multiple stable tracers.     

Detoxification of mercury species—an in vitro study with antidotes in human whole blood

To investigate the effects of mercury species intoxication and to test the efficiency of different commonly applied antidotes, human whole blood and plasma surrogate samples were spiked with inorganic mercury (Hg²⁺) and methylmercury (MeHg⁺, CH₃Hg⁺) prior to treatment with the antidotes 2,3-dimercaptopropan-1-ol (British Anti Lewisite), 2,3-dimercaptosuccinic acid (DMSA), and N-acetylcysteine (NAC). For mercury speciation analysis in these samples, liquid chromatography was coupled to either inductively coupled plasma mass spectrometry (ICP-MS) or electrospray ionisation time-of-flight mass spectrometry (ESI-TOF-MS). Adduct formation between mercury species and physiological thiols (cysteine and glutathione) was observed as well as the release of glutathione under treatment with the antidotes DMSA and NAC.     

Determination of ultra-trace amount methyl-, phenyl- and inorganic mercury in environmental and biological samples by liquid chromatography with inductively coupled plasma mass spectrometry after cloud point extraction preconcentration

The cloud point extraction (CPE) preconcentration of ultra-trace amount of mercury species prior to reverse-phase high performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS) detection was studied. Mercury species including methyl-, ethyl-, phenyl- and inorganic mercury were transformed into hydrophobic chelates by reaction with sodium diethyldithiocarbamate, and the hydrophobic chelates were extracted into a surfactant-rich phase of Triton X-114 upon heating in a water bath at 40 °C. Ethylmercury was found partially decomposed during the CPE process, and was not included in the developed method. Various experimental conditions affecting the CPE preconcentration, HPLC separation, and ICP-MS determination were optimized. Under the optimized conditions, detection limits of 13, 8 and 6 ng l⁻¹ (as Hg) were achieved for MeHg⁺, PhHg⁺ and Hg²⁺, respectively. Seven determinations of a standard solution containing the three mercury species each at 0.5 ng ml⁻¹ level produced relative standard deviations of 5.3, 2.3 and 4.4% for MeHg⁺, PhHg⁺ and Hg²⁺, respectively. The developed method was successfully applied for the determination of the three mercury species in environmental water samples and biological samples of human hair and ocean fish.     

Determination of inorganic and total mercury by vapor generation atomic absorption spectrometry using different temperatures of the measurement cell

A simple and inexpensive laboratory-built flow injection vapor generation system coupled to atomic absorption spectrometry (FI-VG AAS) for inorganic and total mercury determination has been developed. It is based on the vapor generation of total mercury and a selective detection of Hg^2 + or total mercury by varying the temperature of the measurement cell. Only the inorganic mercury is measured when the quartz cell is at room temperature, and when the cell is heated to 650 °C or higher the total Hg concentration is measured. The organic Hg concentration in the sample is calculated from the difference between the total Hg and Hg^2 + concentrations. Parameters such as the type of acid (HCl or HNO₃) and its concentration, reductant (NaBH₄) concentration, carrier solution (HCl) flow rate, carrier gas flow rate, sample volume and quartz cell temperature, which influence FI-VG AAS system performance, were systematically investigated. The optimized conditions for Hg^2 + and total Hg determinations were: 1.0 mol l^− 1 HCl as carrier solution, carrier flow rate of 3.5 ml min^− 1, 0.1% (m/v) NaBH₄, reductant flow rate of 1.0 ml min^− 1 and carrier gas flow rate of 200 ml min^− 1. The relative standard deviation (RSD) is lower than 5.0% for a 1.0 μg l^− 1 Hg solution and the limit of quantification (LOQ, 10 s) is 55 ng g^− 1. Certified samples of dogfish muscle (DORM-1 and DORM-2) and non-certified fish samples were analyzed, using a 6.0 mol l^− 1 HCl solution for analyte extraction. The Hg^2 + and CH₃Hg⁺ concentrations found were in agreement with certified ones.     

Speciation of mercury in water samples by dispersive liquid-liquid microextraction combined with high performance liquid chromatography-inductively coupled plasma mass spectrometry

The dispersive liquid-liquid microextraction (DLLME) combined with high performance liquid chromatography-inductively coupled plasma mass spectrometry for the speciation of mercury in water samples was described. Firstly methylmercury (MeHg⁺) and mercury (Hg²⁺) were complexed with sodium diethyldithiocarbamate, and then the complexes were extracted into carbon tetrachloride by using DLLME. Under the optimized conditions, the enrichment factors of 138 and 350 for MeHg⁺ and Hg²⁺ were obtained from only 5.00 mL sample solution. The detection limits of the analytes (as Hg) were 0.0076 ng mL⁻¹ for MeHg⁺ and 0.0014 ng mL⁻¹ for Hg²⁺, respectively. The relative standard deviations for ten replicate measurements of 0.5 ng mL⁻¹ MeHg⁺ and Hg²⁺ were 6.9% and 4.4%, respectively. Standard reference material of seawater (GBW(E)080042) was analyzed to verify the accuracy of the method and the results were in good agreement with the certified values. Finally, the developed method was successfully applied for the speciation of mercury in three environmental water samples.     

Validation of a simplified field-adapted procedure for routine determinations of methyl mercury at trace levels in natural water samples using species-specific isotope dilution mass spectrometry

A field-adapted procedure based on species-specific isotope dilution (SSID) methodology for trace-level determinations of methyl mercury (CH₃Hg⁺) in mire, fresh and sea water samples was developed, validated and applied in a field study. In the field study, mire water samples were filtered, standardised volumetrically with isotopically enriched CH₃²⁰⁰Hg⁺, and frozen on dry ice. The samples were derivatised in the laboratory without further pre-treatment using sodium tetraethyl borate (NaB(C₂H₅)₄) and the ethylated methyl mercury was purge-trapped on Tenax columns. The analyte was thermo-desorbed onto a GC-ICP-MS system for analysis. Investigations preceding field application of the method showed that when using SSID, for all tested matrices, identical results were obtained between samples that were freeze-preserved or analysed unpreserved. For DOC-rich samples (mire water) additional experiments showed no difference in CH₃Hg⁺ concentration between samples that were derivatised without pre-treatment or after liquid extraction. Extractions of samples for matrix–analyte separation prior to derivatisation are therefore not necessary. No formation of CH₃Hg⁺ was observed during sample storage and treatment when spiking samples with ¹⁹⁸Hg²⁺. Total uncertainty budgets for the field application of the method showed that for analyte concentrations higher than 1.5 pg g^–1 (as Hg) the relative expanded uncertainty (REU) was approximately 5% and dominated by the uncertainty in the isotope standard concentration. Below 0.5 pg g^–1 (as Hg), the REU was >10% and dominated by variations in the field blank. The uncertainty of the method is sufficiently low to accurately determine CH₃Hg⁺ concentrations at trace levels. The detection limit was determined to be 4 fg g^–1 (as Hg) based on replicate analyses of laboratory blanks. The described procedure is reliable, considerably faster and simplified compared to non-SSID methods and thereby very suitable for routine applications of CH₃Hg⁺ speciation analysis in a wide range of water samples.     

Determination of organic and inorganic mercury species in water and sediment samples by HPLC on-line coupled with ICP-MS

This paper describes a preconcentration method for Hg²⁺ and MeHg⁺ in water samples using sodium diethyldithiocarbamate immobilized in polyurethane foam (PU-NaDDC) and an extraction method for several mercury species in sediment samples, including MeHg⁺, EtHg⁺ and PhHg⁺, which is simple, rapid, and uses a single organic solvent. Separation and measurement were done by high-performance liquid chromatography on-line with inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Initially, the test of recovery was applied using procedures compatible with HPLC. Under the optimum extraction conditions, recoveries of 96.7, 96.3 and 97.3% were obtained for MeHg⁺, EtHg⁺, and PhHg⁺, respectively, from n = 4 spiked sediment samples. This study also demonstrates that the combination of solid-phase extraction on PU-NaDDC with HPLC separation and ICP-MS detection is an effective preconcentration procedure for simultaneous measurement of Hg²⁺ and MeHg⁺ at ultra-trace levels in water samples. The application of the proposed procedure to the determination of mercury species in drinking water sample was investigated. The proposed method clearly gave satisfactory average recoveries between 93.7 and 101.5%.