2,2-二(4-羟基-3,5-二硝基苯基)丙烷和2,2-二(4-羟基-3-硝基苯基)丙烷的合成

双酚A在不同的ω（HNO3)溶液中硝化可得到不同的产物。在ω（HNO3)＝22％的硝酸溶液中硝化，反应温度30℃所得产物为2，2-二(4-羟基-3-硝基苯基)丙烷，在ω（HNO3)＝63％的硝酸溶液中硝化，采用三段温度控制法(0℃-30℃-50℃)所得产物为2，2-二(4-羟基-3，5-二硝基苯基)丙烷。产物经柱色谱纯化后，其元素分析、IR，^1H NMR，^13C NMR和MS数据与结构相符。     

2，2′－二[对－（β－羟基－乙氧基）苯基]丙烷双甲基丙烯酸酯合成与纯化

以双酚A和氧乙醇为原料经Wi1liamson反应制得中间体2，2′-二[对-(β-羟基-乙氧基-)苯基]丙烷，再以对甲基苯磺酸为催化剂、以对羟基苯甲醚为阻聚剂在减压条件下通过直接醇化法制备2，2′-二[对-(β-羟基-乙氧基-)苯基]丙烷双甲基丙烯酸酯。对终产物脱色纯化工艺也做了初步的探索。     

6-(2,4-二羟基苯基偶氮)-2,3-二氢-1,4-酞嗪二酮化学发光性能的研究

报道了化学发光试剂6-(2，4-二羟基苯基偶氮)-2，3-二氢-1，4-酞嗪二酮的合成。研究了试剂的物理化学性质和化学发光性能。结果表明，试剂的酸离解常数pk1=4．96，pk2=11．64。在强碱性介质中，试剂产生化学发光，最大发光波长在450nm。金属离子以Co^2 、Mn^2 、Fe^3 、Cr^3 对试剂-KOH-H2O2体系有较强的催化作用。     

2,2'-二[对-(β-羟基-乙氧基-)苯基]丙烷双甲基丙烯酸酯合成与纯化

以双酚A和氯乙醇为原料经Williamson反应制得中间体2,2'-二[对-(β-羟基-乙氧基-)苯基]丙烷,再以对甲基苯磺酸为催化剂、以对羟基苯甲醚为阻聚剂在减压条件下通过直接酯化法制备2,2′-二[对-(β-羟基-乙氧基-)苯基]丙烷双甲基丙烯酸酯.时终产物脱色纯化工艺也做了初步的探索.     

超声技术合成1,5-二-(4-羟基苯基)-1,4-戊二烯-3-酮

利用对羟基苯甲醛和丙酮为原料,以氯化氢气体为催化剂,超声波辐射下成功合成了1,5-二-(4-羟基苯基)-1,4-戊二烯3-酮(HPD).与传统方法相比,该方法具有反应时间短,操作简便及产率高等优点,并讨论了影响产率的因素.     

（3S）-2,2-二甲基-3-苄氧基癸酸的合成

以(R)-pantolactone为原料，经还原、羟基保护、环合、开环、脱保护、氧化等8步反应，合成了(3S)-2，2-二甲基-3-苄氧基癸酸，总收率为40．0％．     

以Heck反应合成（E）-3-甲氧基-4，4′-二羟基二苯乙烯的研究

以香兰素为原料、以Heek反应为关键反应构建两苯环间乙烯桥，经四步反应、以Heek反应75．7％的收率和：50．3％的总收率合成了目标化合物(E)-3-甲氧基-4，4′-二羟基二苯乙烯(1)，并对Heek反应等反应条件进行了探讨．     

2/3-取代硫基-5-邻羟基苯基唑类化合物的合成及抑菌活性

根据生物活性叠加原理,将"邻羟基苯基"和"唑类杂环"分子片断合理组合,设计合成了三个系列12种新型2/3-取代硫基-5-邻羟基苯基唑类化合物5a～7d.水杨酸甲酯在乙醇中与水合肼反应生成水杨酰肼,水杨酰肼与二硫化碳或硫氰酸铵和盐酸反应,生成5-邻羟基苯基-1,3,4-噁二唑-2-硫酮(2),5-邻羟基苯基-1,3,4-噻二唑-2-硫酮(3)和5-邻羟基苯基-4H-1,2,4-三唑-3-硫酮(4),最后在碱性条件下与(取代)卤代苯乙酮发生烷基化反应生成目标化合物.目标化合物的结构经1HNMR,IR和元素分析等表征确认.抑菌测试表明,质量浓度为0.01%时,对白色念珠菌、大肠杆菌的抑菌率高达92%以上,具有强抑菌活性;对金黄色葡萄球菌抑菌率高达82%以上,具有较强的抑菌活性;这表明目标化合物对不同菌株具有广谱抑菌活性,是一类极具潜力的抗真菌、抗革兰氏阴性菌化合物.构效分析表明,苯乙酮环上取代基的类型对化合物抑菌活性有重要影响,引入Cl,Br等卤原子,能显著增强化合物的抑菌活性,而引入CH3供电基团,能降低其抑菌活性.     

1-吡啶-3-[4-(苯基偶氮)苯基]-三氮烯与阳离子表面活性剂显色反应

由于在1-吡啶-3-[4-(苯基偶氮)苯基]-三氮烯(PYPAPT)的分析功能基(N=N-NH)上引入了强助色杂环吡啶基，当PYPAPT与阳离子表面活性剂溴化十六烷基三甲铵(CTMAB)、溴化十六烷基吡啶(CPB)显色时，表现出它是高灵敏的显色试剂。本文研究结果与文献报道1-(4-硝基苯基)-3-[4-(苯基偶氮)苯基]-三氮烯、1-(2-羟基-3，5-二硝基苯基)-3．[4-(苯基偶氮)苯基]-三氮烯、1-(5-萘酚-7-磺酸)-3-[4-(苯基偶氮)苯基]-三氮烯(NAS-APAPT)及1-(2-6-二氯-4-硝基苯)-3-(4-硝基苯)-三氮烯与阳离子表面活性剂显色反应比较，PY     

2,2’-二(4-羟基苯基)丙烷与四丁基铵包合物([(n-C4H9)4N]＋• [(C15H15O2)2H]－)的两种同质异晶体

合成了2,2’-二(4-羟基苯基)丙烷为主体分子的四丁基铵包合物, [(n-C4H9)4N]＋•[(C15H15O2)2H]－, 并通过单晶Ｘ射线衍射法对其进行了晶体结构测定, 发现该包合物的晶体存在两种同质异晶体. 结果表明, 晶型1属单斜晶系, C2/c空间群, 晶胞参数a＝2.8199(2) nm, b＝0.92730(8) nm, c＝2.1450(3) nm, β＝130.050(1)°, Z＝4, R1＝0.0771, wR2＝0.2452; 晶型2属三斜晶系, P`1空间群, 晶胞参数a＝1.0895(1) nm, b＝1.2331(2) nm, c＝1.7244(2) nm, α＝108.137(2)°, β＝94.458(2)°, γ＝100.172(2)°, Z＝2, R1＝0.0697, wR2＝0.2176. 晶型1中2,2’-二(4-羟基苯基)丙烷阴离子的氢键链构成管道式主体晶格, 正四丁基铵阳离子被包合在这些管道中; 晶型2中2个独立的2,2’-二(4-羟基苯基)丙烷阴离子分别形成氢键主体层, 它们交替排列并与夹在其间的正四丁基铵阳离子形成类三明治层状包合物.     

Synthesis and Characterization of a Novel Copoly(aryl ether ketone) Containing 4, 4''''-Biphenyl-bis[4-phthalazin-1(2H)-one] Moiety

Poly(aryl ether ketone)s are a category of high performance engineering thermoplastics characterized by high glass transition temperature and excellent thermooxidative stability. And they have important applications in electronic, electric, aircraft and aerospace industries1~3. Considerable efforts have been made towards the improvement of solubility or processability of poly(aryl ether ketone)s4,5. In our work, a novel bis(phthalazinone) monomer 1 4, 4-biphenyl-bis[4-phthalazin-1(2H)-one] …     

Selective catalytic oxidation of NO with O2 over Ce-doped MnOx/TiO2 catalysts

A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=1/3 and calcined at 300°C shows a superior activity for NO oxidation to NO2. On Ce(1)Mn(3)Ti catalyst, 58% NO conversion was obtained at 200°C and 85% NO conversion at 250°C with a GHSV of 41000 h-1, which was much higher than that over MnOx/TiO2 catalyst (48% at 250°C). Characterization results implied that the higher activity of Ce(1)Mn(3)Ti could be attributed to the enrichment of well-dispersed MnOx on the surface and the abundance of Mn3+ and Ti3+ species. The addition of Ce into MnOx/TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.     

Cu(PPh3)2BH4作还原剂制备PtCu/C催化剂催化烯烃硅氢 加成反应研究

采用湿法浸渍, Cu(PPh3)2BH4作为还原剂制备了负载型PtCu/C双金属催化剂, Pt∶Cu原子比为0.5～2.0. 用于苯乙烯与三乙氧基硅烷加成反应, Cu元素的引入使Pt/C催化剂的催化性能得到提高, 表现出比Speier催化剂、Karestedt催化剂和Pt/C催化剂更好的β-加成产物选择性. 催化直链烯烃与三乙氧基硅烷加成反应表现出优良的催化性能, 并且催化剂可重复使用.     

Catalytic hydrolysis of CFC-12 over solid acid Ti(SO_4)_2

Due to increasing enthusiasm for environmental preservation, the synthesis ofchlorofluorocarbons (CFCs) alternatives and the decomposition of existing CFCs havebeen two hot topics since the production and utilization of CFCs are banned by manycountries. The former has been well carried out while the latter was rarely reported inChina. Among a dozen of decomposition approaches. catalytic hydrolysis is verypromising because of simple processes, requiring mild conditions, dioxins free and the…     

负载型金基催化剂Au/Fe(OH)3催化苯乙烯环氧化反应

用共沉淀法制备了Au/Fe(OH)3催化剂, 以叔丁基过氧化氢为氧化剂, 考察焙烧温度和金担载量等对苯乙烯环氧化反应的影响. 结果表明, 催化剂的焙烧温度、金担载量对苯乙烯环氧化反应有较大影响. 在室温下直接合成的质量分数为4.67%的Au/Fe(OH)3催化剂对苯乙烯环氧化反应显示了很好的催化活性, 于80 ℃反应3 h苯乙烯的转化率达到84.1%, 环氧苯乙烷的选择性达到71.5%. 通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)和Mössbauer分析, 发现催化剂的催化活性与金的价态及铁的化学存在状态有很大关系. 离子态Au3+与载体Fe(OH)3的协同作用对苯乙烯环氧化反应显示出很好的催化活性.     

有机相中利用脂肪酶催化的醇解反应拆分炔丙醇酮乙酸酯

 研究了有机相中脂肪酶催化的炔丙醇酮乙酸酯的立体选择性醇解反应, 考察了碱的种类、酰基受体和溶剂等对反应的影响. 结果表明, 以四氢呋喃为溶剂, CH3OH 为酰基受体, Lipase PLG 脂肪酶为催化剂, Na2CO3 为碱性添加剂, 高底物浓度下 40 oC 反应 96 h 后, 底物转化率和产物 ee 值分别达到 49.5% 和 99.5%. 碱的添加极大地提高了反应速度.     

A New Two-dimensional Zinc Coordination Polymer Constructed by 1,3-Bis(4-pyridyl)-propane and Terephthalate: Synthesis and Crystal Structure

A new zinc coordination polymer, [Zn2(bpp)(tpa)2H2O] 1 (bpp=1,3-bis(4-pyridyl)-propane and tpa=terephthalate) has been hydrothermally synthesized and characterized by elemental analysis, IR and single-crystal X-ray diffraction. X-ray crystal structure analysis reveals that complex 1 crystallizes in monoclinic, space group P2/c with a=18.348(2), b=10.9080(14), c=13.7924(18), β=98.156(2)°, V=2732.5(6)3 , Z=4, C29H24N2O9Zn2 , Mr=675.24, Z=4, F(000)=1376, Dc=1.641 mg/m3 , μ=1.815 mm-1 , the final R=0.0443 and wR=0.0769 for 2715 observed reflections (I>2σ(I)). The title complex exhibits a two-dimensional (4, 4) sheet structure which is further stacked through face-to-face π-π interactions between the monodentately coordinated pyridine ring of bpp ligand and the phenyl ring of terephthalate ligand to form a 3-dimensional supramolecular structure. Thermogravimetric analyses show that the host framework of the complex is thermally stable up to ca. 400 ℃.     

Synthesis of micronized CaO assisted by NH4HCO3 with Ca(OH)2 and its application in heterogeneously catalyzing transesterification reaction for producing biodiesel

Micronized CaO with pores was synthesized by calcining the reaction product CaCO₃ from NH₄HCO₃ and Ca(OH)₂. Scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, X‐ray fluorescence, Fourier transform infrared spectroscopy, and Brunauer–Emmett–Teller analysis were used to characterize CaO, which confirmed that after calcining at 800°C for 2 hr, CaCO₃ was completely converted into porous micronized CaO with a surface area of about 7.295 m²/g and a particle size of 0.5–1.5 μm. The porous CaO microparticles were used as heterogeneous catalysts for producing biodiesel from transesterification of soybean oil and methanol. The influences of reaction time, calcined temperature, and reusability of CaO were explored. The experiments showed that CaO has high catalytic activity for transesterification reaction, and the yield of biodiesel reaches more than 98% under the conditions of methanol/oil mole ratio of 9, and the catalyst amount (catalyst/oil) of 3% after reaction for 2.5 hr. The CaO catalyst can be recycled easily and it also has the advantage of low pollution. Simple synthetic route, low cost, high catalytic activity, good reusability, and great potential for industrialization are the advantages of the porous micronized CaO catalyst that was proposed in this work.     

利用salen型荧光探针测定Cr3+

研究了salen型席夫结构的荧光探针N,N’-二(2-羟基-1-萘甲醛)-l,2-苯二胺(NAPPDIH)对Cr3+的响应。Cr3+能够使该探针的荧光猝灭。研究表明,在pH3.5(乙酸胺-盐酸)和DMSO/H2O(V/V,8:2)的条件下,8.0×10-6 mol/L的Cr3+可以导致NAPPDIH 65%的荧光猝灭。并且,Cr3+的浓度在5.0×10-7～8.0×10-6 mol/L的范围内,与荧光强度的变化值呈良好的线性关系,检出限为3.7×10-7 mol/L。方法可用于直接检测水样中的Cr3+。     

可见光下Fe3+掺杂对K2La2Ti3O10分解水制氢性能的影响

采用溶胶-凝胶法制备了Fe3+掺杂的Fe-K2La2Ti3O10光催化剂, 并通过X射线衍射(XRD)、紫外-可见漫反射(DRS)、X射线光电子能谱(XPS)等技术对其进行了表征和分析, 考察了不同掺杂量对K2La2Ti3O10的性质及光催化分解水制氢活性的影响. 结果表明, Fe-K2La2Ti3O10在400-650 nm范围内显示强吸收, 光谱响应扩展到可见光区(λ>400 nm), 掺杂Fe3+后, K2La2Ti3O10的可见光区的光催化制氢活性显著提高, 掺杂量为nFe/nTi=0.04时活性最佳, 当催化剂用量为0.1 g, 反应液为CH3OH(30 mL)+H2O(90 mL)时, 产氢量达到1.92 μmol·h-1, 为未掺杂时的4倍.