Supramolecular gels: functions and uses

In recent years there has been immense interest in studying gels derived from low molecular mass gelators (supramolecular, or simply molecular gels). The motivation for this is not only to understand the fundamental aggregate structures in the gels at different length scales, but also to explore their potential for futuristic technological applications. Gels have been made sensitive to external stimuli like light and chemical entities by incorporating a spectroscopically active or a receptor unit as part of the gelator molecule. This makes them suitable for applications such as sensing and actuating. The diversity of gel structural architectures has allowed them to be utilized as templates to prepare novel inorganic superstructures for possible applications in catalysis and separation. Gels derived from liquid crystals (anisotropy gels) that can act as dynamically functional materials have been prepared, for example, for (re-writable) information recording. Supramolecular gels can be important in controlled release applications, in oil recovery, for gelling cryogenic fuels etc. They can also serve as media for a range of applications. This tutorial review highlights some of the instructive work done by various groups to develop smart and functional gels, and covers a wide spectrum of scientific interest ranging from medicine to materials science.     

Gelation of a Model Globular Protein

Hen egg white lysozyme (HEWL) was exposed to various physical and chemical denaturing environments to encourage protein denaturation and consequent gelation. Its phase behavior was examined as a function of pH, temperature and also in the presence of the reductant dithiothreitol (DTT). Transparent viscoelastic gels form at low pH values while opaque gels form under alkaline conditions. No increase in viscosity was observed for systems in pure water unless 20 mM of DTT was added, which is known to break the disulfide bridges present in HEWL. The microstructure of the gel was studied using transmission electron microscopy (TEM) and environmental scanning electron microscopy (ESEM). Gels formed at low pH contain fibrils ∼10 nm in diameter with various lengths while at high pH the gels are dominated by particulate aggregates. Thinner fibrils that are 4–6 nm in diameter are observed in the gels formed in the presence of DTT. In this case the distinct feature of the gels is they are thermoreversible and can be melted and reformed easily by varying the temperature.     

Protein diffusion in charged polyacrylamide gels. Visualization and analysis

Protein diffusion in anionic, cross-linked polyacrylamide-based gels supported in fused-silica capillaries was characterized by a direct visualization method. Microphotography was used to obtain transient protein concentration profiles in these gels using cytochrome c as a probe molecule. Gels based on acrylamido-methylpropane sulfonic acid with 2.5-10% N,N'-methylene-bisacrylamide as a cross-linker and with a total polymer concentration of 0.21 g/cm3 yielded diffuse protein concentration profiles which were quantitatively consistent with a Fickian diffusion model. An analytical method was developed to calculate the diffusivity as a function of protein concentration in the gel from the experimental profiles. The diffusivity was found to assume values in the range 2.5-5.5x10(-8) cm2/s and varied somewhat with the protein concentration in the gel. The effects of some of the polymer properties, such as cross-link density, polymer concentration and charge, were also investigated for a limited range of conditions to derive qualitative trends. Results showed that the transport rates increased with a decrease in the cross-link density, were extremely reduced when the polymer concentration was doubled, and were slightly increased when the charge density was decreased by half by polymerizing a 1:1 mixture of acrylamide and acrylamido-methylpropane sulfonic acid monomers.     

Gelation of perfluorinated liquids by N-alkyl perfluoroalkanamides

Gels comprised of low-molecular-mass organic gelators (LMOGs), N-alkyl perfluoroalkanamides [F(CF2)(m)CONH(CH2)(n)H; FmNHn], and several perfluorinated liquids are described. The gelation ability of the amides has been compared to that of two analogous alkyl perfluoroalkanoates. The properties of these gels have been correlated with the N-alkyl and (to a lesser extent) perfluoroalkyl chain lengths in the FmNHn by X-ray diffraction, polarizing optical microscopy, infrared spectroscopy, and small-angle neutron scattering. The gels are thermally reversible and require generally very low concentrations (<2 wt %) of LMOG. Several of the gels have been stable at room temperature for >1 year, thus far. The incompatibility of the fluorocarbon and hydrocarbon segments causes the LMOGs to aggregate into lamellae within the fibrils that constitute the basic unit of the gel networks. IR spectroscopic studies of these gels indicate that additional ordering within the aggregate units is enforced by intermolecular H-bonding among amide groups.     

Organogel media for on-bead screening in combinatorial catalysis

Poly(vinylidene fluoride) (PVdF) forms thermoreversible gels with a number of dipolar aprotic solvents. Gels were prepared containing chromogenic substrates, subject to transformation by polymer-bound catalysts. When the catalysts were mixed with inactive beads and applied to the surface of the gels, the active beads were identifiable through colour changes. Active beads could also be visualised by thermographic imaging. These methods hold promise for catalyst discovery from split-and-mix combinatorial libraries.     

Biologically modified hydrogels for chemical and biochemical analysis

This review focuses on recent advances in the use of hydrogels for chemical and biochemical analysis. Specifically, we discuss recognition elements encapsulated within synthetic hydrogels, synthetic polymers grafted with biological molecules that form freestanding gels, and gels made of naturally occurring polymers, such as proteins or polysaccharides. Gels considered here serve as a platform for the analysis or separation of chemical systems with a high degree of selectivity. Analysis or separation was achieved primarily by incorporating biologically active molecules into a gel matrix. Future developments in biologically integrated gel research for chemical analysis are promising due to the diversity of chemical systems yet to be investigated by these versatile analytical platforms.     

Hyaluronan/Collagen Hydrogels with Sulfated Hyaluronan for Improved Repair of Vascularized Tissue Tune the Binding of Proteins and Promote Endothelial Cell Growth

Innovative biomaterial‐based concepts are required to improve wound healing of damaged vascularized tissues especially in elderly multimorbid patients. To develop functional hydrogels as 3D cellular microenvironments and as carrier or scavenging systems, e.g., for mediator proteins or proinflammatory factors, collagen fibrils are embedded into a network of photo‐crosslinked acrylated hyaluronan (HA), chondroitin sulfate (CS), or sulfated HA (sHA). After lyophilization, the gels show a porous structure and an improved stability against degradation via hyaluronidase. Gels with CS and sHA bind significantly more lysozyme than HA/collagen gels and retard its release. The proliferation and metabolic activity of endothelial cells are significantly increased on sHA gels compared to CS‐ or only HA‐containing hydrogels. These findings highlight the potential of HA/collagen hydrogels with sulfated glycosaminoglycans to tune the protein binding and release behavior and to directly modulate cellular response. This can be easily translated into biomimetic biomaterials with defined properties to stimulate wound healing.     

Novel Xylan Gels Prepared from Oat Spelts

Gels and pastes are used in many areas including application in the cosmetic, pharmaceutical and medical industries. A xylan derivative with pasty consistency was prepared in addition to the synthesis of xylan ethers and esters. The water content of the gel can be widely varied. The gel is formed although the xylan contains no cross-linking group. The hydrophobic and hydrophilic nature of the xylan gel can be adjusted by modifying the xylan. All of the gels can be dried using different methods (air drying, solvent exchange as well as freeze drying) and the dried gels can again disperse in water. The gels were characterised by porosity measurements (mercury intrusion), dynamic vapour sorption (DVS), scanning electron microscopy (SEM) and dispersion stability investigation respectively.     

Investigations into the chromatographic behaviour of silica gels produced from ester silicates

Summary Silica gels produced from ester silicates (ES-gels) are excellent chromatographic supports. In comparison with other silica gels the RP-materials obtained from them show little peak tailing even with polar, and, in particular, with basic compounds. Gels produced by various manufacturing processes have been classified by adsorption with methyl pyridinium chloride. ES-gels yield very low methyl pyridinium chloride values and small asymmetry parameters. The results indicate that there are strongly acidic, structurally-related surface centres which cause peak tailing on most commercial gels. It was shown that surface silanols on silica gels do not, in themselves, lead to peak tailing.     

Comparison of dye adsorption by mesoporous hybrid gels: understanding the interactions between dyes and gel surfaces

Without using any templating agents, mesoporous hybrid gels were prepared using mixtures of tetraethoxysilane (TEOS) with n-propyltriethoxysilane (PTES), bis(trimethoxysilyl)hexane (TSH), or bis(trimethoxysilylpropyl)amine (TSPA) as precursors. Fourier transform infrared (FTIR), N2 adsorption/desorption, thermogravimetry (TG), point of zero charge (PZC), and water vapor adsorption measurements were used to characterize the gels. The adsorption of methyl orange (MO), methyl red (MR), bromocresol purple (BP), phenol red (PR), neutral red (NR), and brilliant blue FCF (BBF) by the gels in both 0.01 M HCl and 0.01 M NaOH solutions was compared comprehensively. The gel derived from TEOS/TSH (with -(CH2)6- groups, Gel 2) has the largest specific surface area (695 m2 g(-1)), the smallest pore volume (0.564 cm3 g(-1)), and the smallest average pore size (3.7 nm). The gels derived form TEOS/PTES (with -(CH2)2CH3 groups, Gel 1), and TEOS/TSPA (with -(CH2)3NH(CH2)3- groups, Gel 3) have similar textual properties. The PZC of Gels 1, 2, and 3 was estimated to be 6.28, 6.20, and 6.88, respectively. Gel 3 has the highest PZC due to the presence of -NH- groups. In general, Gel 2 shows the highest dye adsorption among all the gels in both acidic and basic solutions. All the dyes except NR have much lower adsorption in basic solutions than in acidic solutions. In acidic solutions Gels 1 and 2 have similar adsorption trends for the dyes, except for BP, with NR having the highest adsorption, and PR the lowest adsorption. Gel 3 presents a different trend from Gels 1 and 2, with BBF having the highest adsorption, and MR the lowest adsorption. In basic solutions the order of dye adsorption by all the gels is shown to follow the sequence NR>MR approximately BBF>MO>BP approximately PR. The adsorption results can be explained by considering the textural properties of the gels and the interactions between the gel surfaces and the dyes, which include hydrogen bonding, electrostatic, and hydrophobic interactions.     

Crystallization and thermoreversible gelation of poly(butylene terephthalate)–epoxy mixtures

The thermoreversible gelation of solutions of poly(butylene terephthalate) (PBT) and a liquid diglycidyl ether of bisphenol-A epoxy has been investigated. The morphology of the gels and the conditions under which they form have been characterized by optical microscopy, thermal analysis, and x-ray scattering. Gels were found to form under two different conditions and with different morphologies. Gels formed after a considerable delay when homogenous PBT-epoxy solutions were cooled to slightly below the dissolution temperature of crystalline PBT. These gels contained large, irregular PBT spherulites and smaller birefringent interspherulitic matter. The melting of these gels and the onset of macroscopic flow coincided with the melting of the interspherulitic matter, and occurred before the melting of the large spherulites. Thermoreversible gels formed very quickly when PBT-epoxy solutions were self-nucleated by heating a dispersion of crystalline PBT in epoxy slightly and briefly above the dissolution temperature and then cooling. These gels displayed only a weak background birefringence and were molten when the weak birefringence disappeared. In both cases, gelation occurred by the formation of a three-dimensional PBT network in the epoxy liquid, and the nodes of the network were crystalline PBT particles. $ 1994 John Wiley & Sons, Inc.     

Vanadium-Based Organic-Inorganic Hybrid Materials Prepared by a Sol-Gel Method

Synthesis and characterization of hybrid organic-inorganic nanocomposites based on reaction of vanadium i-propoxide with an organically functionalized poly(ethylene glycol) having di-carbonyl groups is reported. The bulk gels were characterized by thermal analyses (DSC, TGA and TMA) and FT-IR spectroscopy. The results revealed that the gels consist of vanadium-oxygen-vanadium groupings which are cross-linked with the functionalized polymer through the di-carbonyl groups. Gels doped with lithium salt show significant electrical conductivity.     

Formation of surface-attached responsive gel layers via electrochemically induced free-radical polymerization

We report on the formation of hydrogel layers on conducting substrates via a simple electrochemical route. Free-radical polymerization is initiated by an electron transfer from the substrate to a redox-active initiator. Gels of the thermally responsive material poly-N-isopropylacrylamide (p-NIPAM) with a thickness between 25 and 250 nm were produced and characterized. The gels adhere well to the substrate. They show the characteristic swelling transition at 32 degrees C. Although the films appear homogeneous in optical microscopy, AFM images reveal a slightly heterogeneous, globular structure. The gels are permeable to small ions as evidenced by electrochemical experiments with gel-covered electrodes.     

Organogels from water-in-oil microemulsions

A new family of organogels is described. They originate from water-in-oil microemulsions, from which the name microemulsion gels or microemulsion-based gels is derived. Two different types of such gels are presented here, referred to asgelatine gels andlecithin gels, respectively. In the case of gelatine gels, the initial ternary system typically consists of isooctane, AOT (bis 2-ethylhexyl sodiumsuccinate) and water; gelation is induced by solubilization of gelatine in the water microphase above a critical concentration. In the case of lecithin gels no polymeric material is needed. Starting from a reverse micellar solution of lecithin (50–200 mM) in an organic solvent, gelation is induced by the addition of a small amount of water. The molar ratio of water to lecithin typically varies between 1 and 12 for the 50 different solvents investigated to date. These gels are isotropic, thermoreversible and optically transparent.For both microemulsion gels the influence of the concentration of the components on gelation is presented in the form of preliminary phase diagrams.The physico-chemical properties of these organogels were characterized using a variety of techniques such as NMR, DSC, dynamic shear viscosity measurements, and light scattering. Based on these measurements, preliminary models for the structure of these novel systems were developed.It is possible to co-solubilize a variety of reactive molecules in these gels. Therefore, it may be possible to use these organogels for a number of chemical, pharmaceutical, and cosmetic applications.Paper presented at the Workshop on Ringing Gels and Cubic Phases, Bayreuth, October 25–26, 1988.     

Measurement of specific radioactivity in proteins separated by two-dimensional gel electrophoresis

We report a method to quantify the specific radioactivity of proteins that have been separated by 2-DE. Gels are stained with SyproRuby, and protein spots are excised. The SyproRuby dye is extracted from each spot using DMSO, and the fluorescence is quantified automatically using a plate reader. The extracted gel piece is then dissolved in hydrogen peroxide and radioactivity is quantified by liquid scintillation counting. Gentle agitation with DMSO for 24 h was found to extract all the SyproRuby dye from gel fragments. The fluorescence of the extract was linearly related to the amount of BSA loaded onto a series of 1-D gels. When rat muscle samples were run on 2-DE gels, the fluorescence extracted from 54 protein spots showed a good correlation (r = 0.79, p < 0.001) with the corresponding spot intensity measured by conventional scanning and image analysis. DMSO extraction was found not to affect the amount of radioactive protein left in the gel. When a series of BSA solutions of known specific radioactivity were run on 2-DE gels, the specific radioactivity measured by the new method showed a good correlation (r = 0.98, p < 0.01, n = 5) with the specific radioactivity measured directly before loading. Reproducibility of the method was measured in a series of 2-DE gels containing proteins from the livers of rats and mice that had been injected with [35S]methionine. Variability tended to increase when the amount of radioactivity in the protein spot was low, but for samples containing at least 10 dpm above background the CV was around 30%, which is comparable to that obtained when measuring protein expression by conventional image analysis of SyproRuby-stained 2-DE gels. Similar results were obtained whether spots were excised manually or using a spot excision robot. This method offers a high-throughput, cost-effective and reliable method of quantifying the specific radioactivity of proteins from metabolic labelling experiments carried out in vivo, so long as sufficient quantities of radioactive tracer are used.     

The scaled volume as an image analysis variable for detecting changes in protein expression levels by silver stain.

A new variable for measuring the relative intensities of silver stained protein spots on two-dimensional gels is described. The scaled volume (SV) more accurately measures the intensity of protein spots and accounts for differences frequently encountered when trying to compare two gels than other variables such as relative volume ratio, optical density, or relative optical density. The SV scales the signal of interest by the noise (gel background) with secondary signals removed (spots not of interest, e.g., technical artifacts). The SV of spot intensities offers a better dynamic response to protein amount for the model proteins studied here. Depending on the quantity of protein loaded onto gels, we have observed a coefficient of variation range of 0.2 to 1.3. We also observe that the SV silver stain response follows a characteristic exponential profile for different proteins.     

Electrophoresis and detection of tin-labeled DNAs on open-faced gels.

Alternative protocols are necessary for the use of polyacrylamide gel electrophoresis in genome scale sequencing and mapping studies. The use of radioisotopes and manual gel reading will have to be replaced with a flexible labeling system that can be detected at levels similar or to better than radioisotopes but allows automated, high-speed detection. Labeling with stable isotopes is such an alternative. These nondecaying isotopes have the potential to be detected in sub-attomole quantities, despite being surrounded by the gel matrix, due to the high selectivity and sensitivity of resonance-ionization spectroscopy coupled with a mass spectrometer. In this study the detection limits of sputter-initiated resonance ionization spectroscopy (SIRIS) are investigated using thin, open-faced polyacrylamide gels supported by plastic. This system allows reproducibility and flexibility in the choice of gel size and buffer system since the gel can be cast, washed free of polymerization by-products, dried, and stored until use. Various concentrations of an Sn-labeled oligomer were run on these gels and loads of 5 femtomoles/mm could be detected on a 240 microns thick gel. Gels as thin as 60 microns lower the detectable concentration loads to 1 femtomole/mm. The limiting factor is tin contamination in the gel which, if reduced, will further increase detection. Polymerase chain reaction (PCR) products can also be labeled and detected using Sn isotopes, which could prove useful in mapping studies. Also presented are techniques which will facilitate resolution of these PCR products on open-faced gels by employing discontinuous buffers systems and DNA mobility modifiers.     

Microelectrophoresis and auxilary micromethods

In this retrospect of approximately 30 years of work with micromethods, some of them developed in our own laboratory, their principles and application to different separation problems are described, such as one- and two-dimensional microelectrophoresis in capillaries and microslab gels, isoelectric focusing in capillaries or microslab gels, microchromatography, microphotometry, and microfluorometry for qualitative and quantitative evaluation of separation patterns. In addition, some useful auxiliary methods are also described, e.g., a method for quantitative protein determination in a microliter volume when neither the volume nor the protein content in that volume are known, and methods for the determination of glycoproteins, amino acids, and sugars in the picomole range.     

Peptide separations by slab gel electrophoresis in pluronic F127 polymer liquid crystals

Proteomics and peptidomics could benefit from simple methods for high-resolution separation of oligopeptides analogous to slab gel electrophoresis of proteins. Gels of Pluronic F127 copolymer surfactant were investigated as media for slab gel electrophoresis of oligopeptides using a trypsin digest of myoglobin. Concentrated solutions of Pluronic F127 are fluid at low temperatures (相似文献   

Zur Kenntnis des alkalischen Abbaus unterschiedlich hergestellter Kieselgele

Alkaline Degradation of Different Silica Gels During the alkaline degradation of silica gels it is possible by means of the molybdate method to get informations on the primary products of gel degradation. The average condensation degree of silicate anions in the resulting solutions is connected with the cross-linking degree of the silica gels. The differences in the degradation behaviour are discussed in dependence on the gel preparation conditions and in the series sol-hydrogel-xerogel.