Sol–Gel Synthesis of Na<Subscript>2</Subscript>O-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> Glasses and their Characterization by NMR,SNMS, and AFM

Sodium aluminophosphate samples with composition 43.8Na₂O12.5Al₂O₃43.8P₂O₅ were prepared by the sol–gel route using different precursors and working in different pH ranges from pH < 1 up to pH > 10. The structures of the gels and of the corresponding glasses were investigated by solid state NMR and compared to that of a glass with the same composition prepared by a traditional melting process. In addition to bulk materials, thin films were deposited by dip coating on silica glasses. Applying secondary neutral mass spectrometry (SNMS), the expected elements and residual carbon were identified. The surfaces of the coatings and fracture surfaces of bulk material were investigated using atomic force microscopy (AFM). Solid state NMR revealed that samples prepared via a lactate route exhibited local Al and P environments closest to that of the melt-prepared glass, with the highest extent of Al-O-P connectivity.     

[Ca(OPPh<Subscript>3</Subscript>)<Subscript>5</Subscript>][Mo<Subscript>6</Subscript>(μ<Subscript>3</Subscript>-Cl)<Subscript>8</Subscript>Cl<Subscript>6</Subscript>] · OPPh<Subscript>3</Subscript>: Synthesis and crystal structure

A solvatothermal reaction of the octahedral cluster molybdenum complex (H₃O)₂[Mo₆(μ₃-Cl)₈Cl₆] · 6H₂O with CaCl₂ · 6H₂O and OPPh₃ in acetonitrile gave the known polymeric complex trans-[{Ca(OPPh₃)₄}{Mo₆(μ₃-Cl)₈Cl₆}]_∞. However, a closer examination revealed that this system also produces a novel cluster complex, [Ca(OPPh₃)₅][Mo₆(μ₃-Cl)₈Cl₆] · OPPh₃, which was isolated and characterized by X-ray diffraction.     

Rapid synthesis,kinetics and thermodynamics of binary Mn<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript> · H<Subscript>2</Subscript>O

The non-isothermal kinetics of dehydration of AlPO₄·2H₂O was studied in dynamic air atmosphere by TG–DTG–DTA at different heating rates. The result implies an important theoretical support for preparing AlPO₄. The AlPO₄·2H₂O decomposes in two step reactions occurring in the range of 80–150 °C. The activation energy of the second dehydration reaction of AlPO₄·2H₂O as calculated by Kissinger method was found to be 69.68 kJ mol⁻¹, while the Avrami exponent value was 1.49. The results confirmed the elimination of water of crystallization, which related with the crystal growth mechanism. The thermodynamic functions (ΔH*, ΔG* and ΔS*) of the dehydration reaction are calculated by the activated complex theory. These values in the dehydration step showed that it is directly related to the introduction of heat and is non-spontaneous process.     

Synthesis and structure of the complex [Mo<Subscript>3</Subscript>(μ<Subscript>3</Subscript>-S)(μ<Subscript>2</Subscript>-S<Subscript>2</Subscript>)<Subscript>3</Subscript>(Et<Subscript>2</Subscript>NCS<Subscript>2</Subscript>)<Subscript>3</Subscript>]I

The structure of tri-μ₂-disulfido-μ₃-thiotris(diethyldithiocarbamato)-S,S′-triangle-trimolybdenum iodide [Mo₃(μ₃-S)(μ₂-S₂)₃(Et₂NCS₂)₃]I was determined. The compound was characterized by differential thermal analysis and IR, Raman, and X-ray electronic spectroscopy.     

[H<Subscript>4</Subscript>(4,4′-Bipy)<Subscript>3</Subscript>][Sc(OH)(H<Subscript>2</Subscript>O)<Subscript>5</Subscript>]<Subscript>2</Subscript>Cl<Subscript>8</Subscript>: Synthesis,structure, and solid-phase thermal transformation

The reaction of [Sc(OH)(H₂O)₅]₂Cl₄ · 2H₂O in isopropanol with 4,4′-Bipy in CHCl₃ produced a crystalline compound, which was identified as [H₄(4,4′-Bipy)₃][Sc(OH)(H₂O)₅]₂Cl₈ (I) by elemental analysis, IR spectra, and single-crystal X-ray diffraction. In the structure of compound I, the three protonated diimine molecules form a centrosymmetric trimer via N...N hydrogen bonds. The polyhedron around the Sc atom is an octahedron with one split vertex. The excursion of the Sc atom from the plane formed by the oxygen atoms (water molecules) toward the hydroxo bridges is 0.5 Å. The thermolysis of compound I generates ScCl₃, whereas the final decomposition product of the precursor dimer is ScOCl.     

Synthesis and Structure of [Co(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>]<Subscript>2</Subscript>[W<Subscript>4</Subscript>Se<Subscript>4</Subscript>(CN)<Subscript>12</Subscript>]·8.5H<Subscript>2</Subscript>O

The compound [Co(NH₃)₆]₂[W₄Se₄(CN)₁₂]·8.5H₂O was obtained by evaporating an aqueous ammonia solution of K₆[W₄Se₄(CN)₁₂]·6H₂O and CoCl₂·6H₂O complexes. The starting Co(II) of CoCl₂·6H₂O transforms into [Co(NH₃)₆]³⁺ when exposed to air in a water-ammonia medium. Crystal data: triclinic crystal system, a = 10.7750(8) Å, b = 12.2843(9) Å, c = 19.6539(14) Å; α = 90.213(2)°, β = 99.910(2)°, γ = 114.737(1)°, V = 2319.1(3) ų, space group , Z = 2, D _x = 2.633 g/cm³.Original Russian Text Copyright © 2004 by I. V. Kalinina, Z. A. Starikova, F. M. Dolgushin, D. G. Samsonenko, and V. P. Fedin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 905–908, September–October, 2004.     

Synthesis,structure, and some reactions of the cluster complex [(μ-H)<Subscript>2</Subscript>Fe<Subscript>5</Subscript>(μ<Subscript>3</Subscript>-Se)<Subscript>2</Subscript>(CO)<Subscript>14</Subscript>]

In the reaction of Na₂Se with [Fe(CO)₅] in isopropanol with subsequent acidification with HCl, which is used to synthesize [(μ-H)₂Fe₃(μ₃-Se)(CO)₉] (II), the cluster [(μ-H)₂Fe₅(μ₃-Se)₂(CO)₁₄] (I) was detected. In assumption that compound I could serve as a suitable synthon for preparing the bulky heterometallic clusters, its reactions with the Rh-containing complexes were studied. The reaction of I with [Rh(CO)₂Cp*] (Cp* is pentamethylcyclopentadienyl) was found to give a mixture of the products. The main reaction products were isolated and their structures were determined: [Fe₂Rh(μ₃-Se)₂(CO)₆Cp*], [Fe₂Rh(μ₃-Se)(μ₃-CO)(CO)₆Cp*], [FeRh₂(μ₃-Se)(μ-CO)(CO)₃Cp ₂ ^* ], [Fe₂Rh₂(μ₄-Se)(μ-CO)₄(CO)₂Cp ₂ ^* ]. Potassium hydride treatment of II with subsequent addition of [Cp*Rh(CH₃CN)₃](CF₃SO₃)₂ leads to the well-known cluster complex [Fe₃Rh(μ₄-Se)(CO)₉Cp*]. A set of the reaction products indicates that the {Fe₅Se₂} core cannot be used as one-piece “building block” in the synthesis of heterometallic clusters.     

Crystal structure,infrared and raman spectra of tripotassium trisaccha-rinate dihydrate,K<Subscript>3</Subscript>(C<Subscript>7</Subscript>H<Subscript>4</Subscript>NO<Subscript>3</Subscript>S)<Subscript>3</Subscript>·2H<Subscript>2</Subscript>O

The crystal structure of tripotassium trisaccharinate dihydrate, K₃(C₇H₄NO₃S)₃·2H₂O, is triclic, space group\(P \bar 1, Z = 2\). It consists of three crystallographically independent potassium and saccharinato ions as well as two structurally different water molecules. Potassium coordination polyhedra are irregular, with K1 and K3 six-coordinated and the third one K2 seven-coordinated. The K?O distances range from 2.652(9) to 3.100(2) Å(mean: 2.790 Å) whereas the K?N distance is 3.025(3) Å. The water molecules W2 is disordered over three positions with occupancies of approximately 0.6, 0.2 and 0.2. The hydrogen atom (H1W1) of the ordered water molecule (O1W) is hydrogen bonded to the sulfonyl oxygen atom (O11) (R(O...O)=2.976(3) Å), whereas the other hydrogen atom (H2W1) is bifurcated to the carbonyl oxygen atom (O13) (R(O...O)=2.851(3) Å) and the disordered water molecules (O23W) (R(O...O)=3.067(12) Å). The carbonyl oxygens (O13, O23 and O33) and one of the disordered water molecules (O22W) are involved in C?H...O hydrogen bonds (R(C?H...O)=3.027(4)–3.304(9) Å). Structural characteristics of the studied compound are compared with the analogous trisodium trisaccharinate dihydrate and dipotassium sodium trisaccharinate monohydrate. Infrared and Raman spectra of the title compound have been analyzed in relation to the structure, and compared with the spectra of trisodium trisaccharinate dihydrate.     

Solubility and stability of (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>SO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O<Subscript>2</Subscript> in organic and aqueous-organic media

Solubility and stability of (NH₄)₂SO₄·H₂O₂ in organic solvents (glycerol, ethylene glycol, TOSOL-A40 OM antifreeze), in mixtures of an organic solvent and water, and in pure water was studied. Crystallographic properties of the ammonium sulfate precipitating from aqueous-organic solvents and aqueous solutions in various time intervals and differing from ordinary (NH₄)₂SO₄ in solubility and one of crystallographic parameters were analyzed.     

Synthesis,microstructure, and electric properties of CaZr<Subscript>0.9</Subscript>Y<Subscript>0.1</Subscript>O<Subscript>3 – δ</Subscript> films obtained on porous SrTi<Subscript>0.8</Subscript>Fe<Subscript>0.2</Subscript>O<Subscript>3 – δ</Subscript> supports

Compact CaZr_0.9Y_0.1O_3–δ (CZY) film on a porous SrTi_0.8Fe_0.2O_3–δ (STF) support is obtained using the technique of deposition from solutions of inorganic salts in ethanol. According to the data of scanning electron microscopy (SEM), the film has a nanoporous granular structure with the grain size of 0.2 to 1 μm. The thickness of the CZY film on the STF support is about 3 μm after 15-fold solution application. The results of studying the elemental composition showed that elements of the support diffuse into the film in the course of synthesis. Analysis of the data of impedance spectroscopy shows that conductivity of the CZY film is limited the grain bulk. It is assumed that the comparatively low conductivity activation energy of the film (50.3 kJ/mol) is due to diffusion of elements of the STF support that results in variation of the film composition and properties.     

Synthesis and crystal structure of Rb<Subscript>2</Subscript>[(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(SeO<Subscript>4</Subscript>)] · 1.33H<Subscript>2</Subscript>O

The single crystals of Rb₂[(UO₂)₂(C₂O₄)₂(SeO₄)] · 1.33H₂O were synthesized and studied by X-ray diffraction. The crystals are monoclinic, space group P2₁/m, Z= 2, the unit cell parameters: a = 5.6537(8), b = 18.736(3), c = 9.4535(15) Å, β = 98.440(5)°, V = 990.6(3) ų, R ₁ = 0.0506. The main structural units of the crystal are infinite layers of [(UO₂)₂(C₂O₄)₂(SeO₄)]^2?, corresponding to the crystal chemical group A₂K ₂ ⁰² B² (A = UO ₂ ²⁺ , K⁰² = C₂O ₄ ^2? , B² = SeO ₄ ^2? ) of uranyl complexes. The uranium-containing layers are united into a three-dimensional framework through the electrostatic interactions with the outer-sphere rubidium ions and the hydrogen bonding system involving the outer-sphere water molecules.     

New double complex salt [PdEn<Subscript>2</Subscript>]<Subscript>3</Subscript>[Rh(NO<Subscript>2</Subscript>)<Subscript>6</Subscript>]<Subscript>2</Subscript> · 2.67H<Subscript>2</Subscript>O: Synthesis,crystal structure,and thermal properties

The crystal structure of the double complex salt (DCS) [PdEn₂]₃[Rh(NO₂)₆]₂ ? 2.67H₂O (I) has been determined by X-ray diffraction. Crystals are triclinic, space group \(P\bar 1\), Z = 4, a = 9.2331(3) Å, b = 9.9136(4) Å, c = 13.7824(5) Å, α = 84.3230(14)°, β = 89.9655(14)°, γ = 66.7272(13)°, V = 1152.19(7) ų, ρ_calcd = 2.141 g/cm³, R = 0.0279. The thermal behavior of complex salt I has been studied in various gas atmospheres. The end product of thermolysis in reductive atmosphere is a mixture of Pd_0.45Rh_0.55 and Pd_0.95Rh_0.05 solid solutions. The end product of thermolysis in an inert atmosphere is a homogeneous Pd_0.6Rh_0.4 solid solution.     

Synthesis,Structure and Solid-Phase Transformations of Fe Nitrosyl Complex Na<Subscript>2</Subscript>[Fe<Subscript>2</Subscript>(S<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>2</Subscript>(NO)<Subscript>4</Subscript>] · 4H<Subscript>2</Subscript>O

Binuclear iron nitrosyl complex Na₂[Fe₂(S₂O₃)₂(NO)₄] · 4H₂O (I) was synthesized by the reaction of iron(II) sulfate with sodium thiosulfate in the flow of NO gas. According to X-ray diffraction data, the [Fe₂(S₂O₃)₂(NO)₄]^2– anion has binuclear centrosymmetric structure with Fe atoms bonded by the µ-S atoms of thiosulfate groups. The isomeric shift for complex I =0.168(1) mm/s and quadrupole splitting E _Q =1.288 mm/s at T=80 K. When heated, complex I transforms to Na₂[Fe₂(S₂O₃)₂(NO)₄] (II), whose unit cell parameters found by X-ray diffraction method differ from those of complex I. The process of transformation of I to II was studied by calorimetric method. Complex I transforms to complex II without chemical decomposition, which was confirmed by IR and mass spectroscopy data.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 5, 2005, pp. 323–328.Original Russian Text Copyright © 2005 by Sanina, Aldoshin, Rudneva, Golovina, Shilov, Shulga, Martynenko, Ovanesyan.     

Crystal structure and thermal properties of [Au(en)<Subscript>2</Subscript>]<Subscript>2</Subscript>[Cu(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>]<Subscript>3</Subscript>·8H<Subscript>2</Subscript>O

The crystal structure of a double complex salt of the composition [Au(en)₂]₂[Cu(C₂O₄)₂]₃·8H₂O (en = ethylenediamine) at 150 K is determined by single crystal X-ray diffraction. The crystal data for C₂₀H₄₈Au₂Cu₃N₈O₃₂ are: a = 9.1761(3) Å, b = 16.9749(6) Å, c = 13.4475(5) Å, β = 104.333(1)°, V = 2029.43(12) ų, P2₁/c space group, Z = 2, d _x = 2.450 g/cm³. It is demonstrated that the thermal decomposition of the double complex salt in a helium or hydrogen atmosphere affords the solid solution Au_0.4Cu_0.6.     

Synthesis and physicochemical study of M<Subscript>4</Subscript>Na<Subscript>2</Subscript>V<Subscript>10</Subscript>O<Subscript>28</Subscript> · 10H<Subscript>2</Subscript>O (M=K,Rb, NH<Subscript>4</Subscript>)

The formation conditions and physicochemical properties of binary decavanadates M₄Na₂V₁₀O₂₈ · 10H₂O (M=K, Rb, NH₄), synthesized by crystallization from saturated solutions of the NaVO₃-MH₂AsO₄-H₂O systems, were studied by chemical analysis, X-ray powder diffraction, microscopy, thermogravimetry, and IR spectroscopy. To optimize the synthesis conditions of M₄Na₂V₁₀O₂₈ · 10H₂O, the ( 1-x)NaVO₃ · 2H₂O · xMH2AsO4-H₂O (0.2 ≤ x ≤ 0.8) isomolar series method was applied to studying the interaction in the NaVO₃-MH₂AsO₄-H₂O systems (M = K, Rb, Cs) at the 0.4 mol/L total molar concentration of NaVO₃ and MH₂AsO₄ in solutions. The studied M₄Na₂V₁₀O₂₈ · 10H₂O compounds were shown to be isostructural with triclinic crystals (Z= 1, space group P $ \bar 1 $ \bar 1 ), and their unit cell parameters were estimated.     

Ternary Systems LiBr–LiVO<Subscript>3</Subscript>–Li<Subscript>2</Subscript>CrO<Subscript>4</Subscript> and KBr–KVO<Subscript>3</Subscript>–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

The binary system KVO₃–K₂CrO₄ and two ternary systems, LiBr–LiVO₃–Li₂CrO₄ and KBr–KVO₃–K₂CrO₄, were studied. In the ternary systems, the compositions and melting points of eutectic alloys were determined by differential thermal analysis: (49.0 mol % LiBr, 5.0 mol % LiVO₃, 46.0 mol % Li₂CrO₄, 400°C) and (17.0 mol % KBr, 78.0 mol % KVO₃, 5.0 mol % K₂CrO₄, 458°C), respectively.     

A theoretical investigation on the structures and stabilities of C<Subscript>60</Subscript>X<Subscript>18</Subscript> and C<Subscript>70</Subscript>X<Subscript>10</Subscript> (X = H,F, Cl,and Br)

A density functional theory study was performed on fullerene derivatives C₆₀X₁₈ and C₇₀X₁₀ (X = H, F, Cl, and Br). The calculated results show that the lowest energy isomers are IPR-satisfying for C₆₀X₁₈ (X = H, F, Cl, and Br). It is found that the addition patterns of X (X = Cl and Br) are different from those of X (X = H and F) for C₆₀, demonstrating that the stability of fullerene derivatives is partly attributed to the steric repulsion and electronegativity of added atoms. However, the lowest energy isomers are IPR-violating for C₇₀X₁₀ (X = H, F, and Cl), suggesting that many more fullerene derivatives may violate the isolated pentagon rule.     

Synthesis and Crystal Structure of [Co(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>](C<Subscript>19</Subscript>H<Subscript>17</Subscript>O<Subscript>4</Subscript>SO<Subscript>3</Subscript>)<Subscript>2</Subscript>⋅8H<Subscript>2</Subscript>O

The title compound, cobalt 4′,7-diethoxylisoflavone-3′-sulfonate([Co(H₂O)₆](X)₂⋅8H₂O, X = C₁₉H₁₇O₄SO₃) was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic space group P-1 with cell parameters a = 9.026(3) Å, b = 16.431(5) Å, c = 18.195(6) Å, α = 72.289(4)^∘, β = 87.498(4)^∘, γ = 82.775(5)^∘, V = 2550.1(13) Å⁻³, D_c = 1.419 Mg m⁻³, and Z = 2. The results show that the title compound consists of one cobalt cation, six coordinated water molecules, eight lattice water molecules, and two 4′,7-diethoxylisoflavone-3′-sulfonate anions, C₁₉H₁₇O₄SO⁻₃. Two anions have different conformations. Twelve H atoms of six coordinated water molecules, as donors, form hydrogen bonds with four oxygen atoms of sulfo-groups of two anions and eight oxygen atoms of eight lattice water molecules. In addition, π < eqid1 > ⋅ < eqid2 > π stacking interactions exist in the crystal structure, which together with hydrogen bonds lead to supramolecular formation with a three-dimensional network.     

Synthesis,structure, and electrochemical behavior of a novel copper compound Cu(2,2′-Bipy)<Subscript>3</Subscript>]<Subscript>3</Subscript>(P<Subscript>2</Subscript>W<Subscript>18</Subscript>O<Subscript>62</Subscript>) · 2H<Subscript>2</Subscript>O

A novel copper compound constructed from Wells-Dawson polyanion clusters and metal-organic complex subunits,[Cu(2,2′-Bipy)₃]₃(P₂W₁₈O₆₂) · 2H₂O(I), has been prepared under hydrothermal conditions, and characterized by elemental analysis, IR, UV, TG, cyclic voltammetry, and single-crystal X-ray diffraction. Crystal structural analysis indicates that I crystallizes in triclinic system, space group P \(\bar 1\), a = 15.6195(11), b = 17.144(2), c = 25.0900(15) Å, α = 93.1040(10)°, β = 94.309(3)°, γ = 102.642(2)°. Three Cu²⁺ ions have the same coordination environment: Cu(1), Cu(2), and Cu(3) are all six-coordinated by three 2, 2′-Bipy. The Dawson polyoxoanion [P₂M₁₈O₆₂]^6? do not coordinate with the Cu²⁺ ion added for charge balance.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).