Layered Crystalline Barium Phenylphosphonate as Host Support for <Emphasis Type="Italic">n</Emphasis>-Alkylmonoamine Intercalation

Layered barium phosphonate, synthesized by combining the metallic salt with a phenylphosphonic acid solution, yielded Ba(HO₃PC₆H₅)₂ ·H₂O (BaPP), which gives the corresponding anhydrous compound on heating. n-Alkylmonoamines intercalation into the crystalline lamellar precursor resulted in compounds having the general formula Ba(HO₃PC₆H₅)₂ ·xH₂N(CH₂) _n CH₃ ·(1−x)H₂O (n=1–5). The intense infrared bands in the 1160–695 cm⁻¹ interval confirmed the presence of the phosphonate groups attached to the inorganic layer, with sharp and intense peaks in X-ray diffraction patterns for both hydrated and anhydrous compounds. The thermogravimetric curves for both supports showed the release of water molecules and the organic moiety in distinct stages to yield a final Ba(PO₃)₂residue. An additional amine mass loss steps was observed for the corresponding aminated compounds. One isolated DSC peak found in the layered precursor compound contrasts by its absence in the anhydrous form and the ³P NMR spectrum presented one peak for attached phenylphosphonate groups centered at 12.4 ppm. An increase in carbon and hydrogen percentages for intercalated compounds followed the amine size chain with a corresponding decrease in nitrogen percentage. The interlayer distance (d) correlates linearly with the number of carbon atoms (n _c ) of the alkylamine chains, d=1467 + 62n _c and d=1688 + 60n _c , for the hydrated and anhydrous compounds, respectively, permitting inference of the interlayer distance for an unknown amine.This revised version was published online in July 2005 with a corrected issue number.     

A new stilbene glycoside from the <Emphasis Type="Italic">n</Emphasis>-butanol fraction of <Emphasis Type="Italic">Veratrum dahuricum</Emphasis>

A new stilbene glycoside, 5-methylresveratrol-3,4′-O-β-D-diglucopyranoside (1), was isolated from the n-butanol fraction of the rhizomes of Veratrum dahuricum, together with five known stilbenoids: resveratrol-3-O-β-D-glycoside (2), 4′-methylresveratrol-3-O-β-D-glycoside (3), oxyresveratrol-4′-O-β-D-glycoside (4), oxyresveratrol-3-O-β-D-glycoside (5), and oxyresveratrol-3,4′-O-β-D-diglycoside (6), and found for the first time in the investigated plant. The structures of six isolates were identified on the basis of 1D and 2D NMR data. Compounds 1–6 showed platelet aggregation inhibition, and compound 1 had an IC₅₀ value of 383.6 μM against platelet aggregation induced by AA. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 279–282, May–June, 2009.     

Skeletal Isomerization of <Emphasis Type="Italic">n</Emphasis>-butenes over Solid Acid Catalysts

Conversion reactions of n-butenes over zeolites and amorphous catalysts have been investigated to deduce the factor that determines the selectivity for the skeletal isomerization producing isobutene. The effects of pore structure and acid site concentration on the selectivity for the skeletal isomerization are discussed on various catalysts. The pore structures of FER and CLI zeolites induce the distant locations of butene molecules, accelerating monomolecular skeletal isomerization. On the other hand, acid site concentration determines the preferred reaction path of n-butenes on amorphous catalysts. Oligomerization followed by cracking that produces various hydrocarbons is suppressed on the catalyst with low acid site concentration, resulting in high selectivity for isobutene. The feasibility of monomolecular skeletal isomerization on zeolites and amorphous catalysts is confirmed by its reversibility with high selectivity.     

The group-theoretical structure of the atomic g shell: connection with the alternating group <Emphasis Type="Italic">A</Emphasis><Subscript>6</Subscript> as <Emphasis Type="Italic">L</Emphasis><Subscript>2</Subscript>(9)

The special projective linear groups PSL(2ℓ + 1) or L ₂(2ℓ + 1) of order 2ℓ(2ℓ + 1)(ℓ + 1) can be used to study atomic shells of electrons with angular momentum quantum number ℓ corresponding to the atomic p, d, f, and g shells for ℓ = 1, 2, 3, 4, respectively. For the atomic g shell the group L ₂(9) is isomorphic with the alternating group A ₆ on six objects of order 360 or the symmetry group of the 5-dimensional simplex, a 5-dimensional analogue of the tetrahedron with 6 vertices and 15 edges. This leads to the subgroup chain SO(9) ⊃ SO(5) ⊃ L ₂(9) for the atomic g shell analogous to the subgroup chain SO(7) ⊃ G ₂ ⊃ L ₂(7) ≈⁷ O for the atomic f shell. In the L ₂(9) group only the representations of spherical harmonics or sums thereof, Γ(Y_ℓ), with dimensions dim Γ(Y_ℓ) or dim Γ(Y_ℓ) ± 1 divisible by 9 are found to be individually reducible to irreducible representations (irreps) or sums of irreps of L ₂(9). This leads to term groupings such as S, PD, G, PF, DH, L, PK, DI, FH, M, FI, PO, DN, HK, R, etc., of increasing total dimension for the irreps of SO(9) for various g ⁿ configurations in the atomic g shell.     

Apparent Dipole Moments of 1-Alkanols in Cyclohexane and <Emphasis Type="Italic">n</Emphasis>-Heptane,and Excess Molar Volumes of (1-Alkanol + Cyclohexane or <Emphasis Type="Italic">n</Emphasis>-Heptane) at 298.15 K

Excess molar volumes and relative permittivities at a frequency of 30 kHz were determined precisely for the binary mixtures of 1-alkanols, C_nH_2n+1OH for n = 1 to 10, with cyclohexane or n-heptane to the mole fraction of 1-alkanol, x, to 0.1 at a temperature of 298.15 K. Apparent dipole moments, , of the 1-alkanols were calculated by using the Frohlich equation, and the limiting values, ₀, were determined by extrapolating to infinite dilution. The solvent effect on ₀ was very small. The value of ₀ was largest in methanol and decreased with increasing n. It was found that the alkanols were isolated up to x 0.003. The threshold of molecular interaction beyond this critical mole fraction was ascertained by means of FT-IR spectra. The dipole moments of the 1-alkanols for n = 1–4 were evaluated by ab initio calculations. The average values of ₀ for the rotational configurations calculated by assuming the Boltzmann distribution agreed excellently with the observed ones. The excess partial molar volumes of 1-alkanols determined at the infinite dilution depended on n as well as the solvent. These results are discussed from the viewpoint of the interactions between the solute and solvent molecules.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Screening and Immobilization <Emphasis Type="Italic">Burkholderia</Emphasis> sp. GXU56 Lipase for Enantioselective Resolution of (<Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">S</Emphasis>)-Methyl Mandelate

Microorganisms producing lipase were isolated from soil and sewage samples and screened for enantioselective resolution of (R,S)-methyl mandelate to (R)-mandelic acid. A strain designated as GXU56 was obtained and identified as Burkholderia sp. Preparing immobilized GXU56 lipase by simple adsorption on octyl sepharose CL-4B, the optimum temperature was shifted from 40 °C (free lipase) to 50 °C (immobilized lipase), and the optimum pH was shifted from 8.0 (free lipase) to 7.2 (immobilized lipase). The immobilized enzyme displayed excellent stability in the pH range of 5.0–8.0, at the temperatures below 50 °C and in organic solvents compared with free enzyme. Enantioselectivity ratio for (R)-mandelic acid (E) was dramatically improved from 29.2 to more than 300 by applying immobilized lipase in the resolution of (R,S)-methyl mandelate. After five cycles of use of immobilized lipase, conversion and enantiomeric excess of (R)-mandelic acid were 34.5% and 98.5%, respectively, with enantioselectivity ratio for (R)-mandelic acid (E) of 230. Thus, octyl-sepharose-immobilized GXU56 lipase can be used as a bio-resolution reagent for producing (R)-mandelic acid.     

Bifurcation in the stable manifold of the bioreactor with <Emphasis Type="Italic">n</Emphasis>th and <Emphasis Type="Italic">m</Emphasis>th order polynomial yields

The three dimensional chemostat with nth and mth order polynomial yields, instead of the particular one such as A + BS, A + BS ², A + BS ³, A + BS ⁴, A + BS ² + CS ³ and A + BS ⁿ , is proposed. The existence of limit cycles in the two-dimensional stable manifold, the Hopf bifurcation and the stability of the periodic solution created by the bifurcation are proved.     

<Emphasis Type="Italic">Ab initio</Emphasis> investigation of aniline and <Emphasis Type="Italic">n</Emphasis>-propylamine associates with dimethylsulfoxide,isobutyronitrile, and N-methylpiperidone

The structure of the dimer associates of aniline and n-propylamine with dimethylsulfoxide, isobutyronitrile, and N-methylpiperidone was investigated by ab initio calculations. Stable configurations of the complexes and their structural and energy characteristics have been determined. The effects of the nature of the solvent and the structure of the associate on the properties of the NH₂ group are examined.     

Excess Volumetric and Spectroscopic Properties of Mixtures of Some <Emphasis Type="Italic">n</Emphasis>-Alkoxyethanols and of Some Polyethers with 2-Pyrrolidinone and <Emphasis Type="Italic">N</Emphasis>-Methyl-2-Pyrrolidinone at 298.15 K

Excess molar volumes V_m^E for binary liquid mixtures of n-alkoxyethanols or polyethers + 2-pyrrolidinone or N-methyl-2-pyrrolidinone have been measured with a continuous dilution dilatometer at 298.15 K and atmospheric pressure as a function of composition. The alkoxyethanols are diethylene glycol monomethylether, 2-(2-methoxyethoxy) ethanol, CH₃(OC₂H₄)₂OH; diethylene glycol monoethylether, 2-(2-ethoxyethoxy) ethanol, C₂H₅(OC₂H₄)₂OH; and diethylene glycol monobutylether, 2-(2-butoxyethoxy) ethanol, C₄H₉(OC₂H₄)₂OH; whereas the polyethers are diethylene glycol dimethylether, bis(2-methoxyethyl)ether, CH₃(OC₂H₄)₂OCH₃; diethylene glycol diethylether, bis(2-ethoxyethyl)ether, C₂H₅(OC₂H₄)₂OC₂H₅; and diethylene glycol dibutylether, bis(2-butoxyethyl)ether, C₄H₉(OC₂H₄)₂OC₄H₉. In all mixtures the excess molar volumes are negative and symmetric across the entire composition range. The excess volumes are fitted to the Redlich–Kister polynomial equation to obtain the binary coefficients and the standard errors. The experimental results have also been discussed on the basis of IR measurements.     

Drying dissipative structures of the aqueous solution of sodium <Emphasis Type="Italic">n</Emphasis>-alkyl sulfates on a cover glass

Macroscopic and microscopic dissipative structural patterns formed in the course of drying a series of the anionic detergents, sodium n-alkyl sulfate (n-alkyl = n-hexyl, n-octyl, n-decyl, n-dodecyl, n-hexadecyl, and n-octadecyl), on a cover glass have been observed. The broad ring patterns of the hill accumulated with the detergent molecules are formed around the outside edges in the macroscopic scale. The microscopic patterns of the small blocks, star-like patterns, and branched strings are formed. The pattern area and the time for the dryness have been discussed as a function of detergent concentration and the number of carbons of the detergents. The convection flow of water accompanied by the detergent molecules, change in the contact angles at the drying frontier between the solution and substrate in the course of dryness, and interactions among the detergents and substrate are important for macroscopic pattern formation. Microscopic patterns are determined mainly by the shape and size of molecules, translational Brownian movement of detergent molecules, and the electrostatic and hydrophobic interactions between detergents and/or between the detergent and substrate in the course of solidification.     

Intramolecular co-operative hydrogen bond in calix[<Emphasis Type="Italic">n</Emphasis>]arenes (<Emphasis Type="Italic">n</Emphasis> = 4, 6, 8) bearing bulky substituents

Based on the Fourier transform IR spectroscopy together with the published NMR and X-ray data, it was shown that cyclic co-operative intramolecular hydrogen bond in calix[n]arene (n = 4, 6, 8) molecules is mainly responsible for their conformational state irrespective of the presence or absence of bulky substituents at the upper rim of the molecules. In accordance with the size of a macrocycle (n = 4, 6, 8), the stable conformation, secured by such a hydrogen bond, constitutes a cone, a pinched cone, and a pleated loop, respectively. The new, potentially competing system of hydrogen bonds in calix[6]arenes with 3-carboxymethyl-1-adamantyl substituents does not affect the conformational state of the macrocycle and its H-bonding. Six carboxy groups at the upper rim form in pairs three cyclic dimers, which does not disturb the hydrogen bonds of the hydroxy groups and the conformation of the macrocycle. In addition, the cavity of the molecule is considerably enlarged. The removal or rearrangement of the guest molecules in the solid calixarene by heating up to 180 °C only slightly affects the conformational state of macrocycles bearing bulky substituents, whereas in calixarenes devoid of such substituents, the similar procedure leads to somewhat of a distortion of the macrocycles (judging from the IR spectral indications of hydrogen bonding). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1062–1068, June, 2007.     

Theoretical Study of the Interactions between Isolated <Emphasis Type="Italic">DNA</Emphasis> Bases and Various Groups IA and IIA Metal Ions by <Emphasis Type="Italic">Ab Initio</Emphasis> Calculations

Summary. Interactions of the DNA bases adenine (A), guanine (G), cytosine (C), and thymine (T) with various metal ions (M) of groups IA and IIA of the periodic table of the elements were studied at the HF, MP2, and DFT levels of theory. The structures and thermodynamic stabilities of these species were studied at the gas phase. The calculations uphold that there exist two active sites in G and one in A, C, and T. The calculations also show that the O² atom in T is a more active site for metal ion bindings than that in C. The stability energies for G … M complexes are larger than those for A … M complexes and the stability energies for T … M complexes are larger than those for C … M complexes. As z/r ratio for the metal ion increases, the interaction energy for the complex increases systematically. Thermodynamic quantities such as ΔH, ΔG, ΔS, and ln K were determined for each complexation reaction, [Base+M ⁿ⁺ →(Base … M) ⁿ⁺]. A, G, and C complexation reactions except for C … Rb⁺ are exothermic. The situation is quite different for T complexation reactions and all except for T … Be²⁺ and T … Mg²⁺ are endothermic.     

Antioxidant flavonoids from <Emphasis Type="Italic">Tamus communis</Emphasis> ssp. <Emphasis Type="Italic">cretica</Emphasis>

A new flavonoid, kaempferol-3,4′-di-O-α-L-rhamnopyranoside (1), and three known flavonoids (2–4) were isolated from the aerial parts of T. communis L. The structure of the new compound was elucidated on the basis of spectroscopic data. Compounds 1 and 2 showed significant antioxidant activity (IC₅₀ 187.151 ± 0.821 μM, and 92.079±0.513 μM, respectively), whereas compounds 3 and 4 showed moderate activity in DPPH free radical scavenging assays. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 295–297, May–June, 2009.     

<Emphasis Type="Italic">k</Emphasis>-resonance in Toroidal Polyhexes*

This paper considers the k -resonance of a toroidal polyhex (or toroidal graphitoid) with a string (p, q, t) of three integers (p ≥ 2, q ≥ 2, 0 ≤ t ≤ p − 1). A toroidal polyhex G is said to be k-resonant if, for 1≤ i ≤ k, any i disjoint hexagons are mutually resonant, that is, G has a Kekulé structure (perfect matching) M such that these hexagons are M-alternating (in and off M). Characterizations for 1, 2 and 3-resonant toroidal polyhexes are given respectively in this paper. *This work is supported by FRG, Hong Kong Baptist University; NSFC and TRAPOYT.     

Rapid molecular typing of <Emphasis Type="Italic">Tuber melanosporum</Emphasis>, <Emphasis Type="Italic">T. brumale</Emphasis> and <Emphasis Type="Italic">T. indicum</Emphasis> from tree seedlings and canned truffles

We have developed new DNA extraction and purification procedures for investigation of mycorrhized seedlings and canned truffles. Use of these procedures on approximately 100 mg initial material enabled good sample representation. For mycorrhized seedlings, Taq polymerase inhibitors were discarded irrespective of tree species. In routine analysis we systematically used consensus primers ITS1/ITS4 to check the absence of Taq polymerase inhibitors and the presence of fungus DNA. Positive response with ITS validates other positive or negative PCR results. Absence of amplification with ITS prevents validation of other results. For canned truffles, DNA harvested from ascocarps sterilized for one and a half hours at 115°C was amplified with specific primers. We have developed consensus primers, named R12/F12, to check for the presence of amplifiable fungus DNA and the absence of Taq polymerase inhibitors. Here also, positive response with consensus R12/F12 validates other positive or negative PCR results. We have developed one primer pair specific for T. brumale and another specific for T. melanosporum. We can then characterize these two taxa, which enables the use of truffle or truffled French designations. We can also characterize T. indicum, the Asiatic black truffle that might fraudulently be sold as T. melanosporum and T. brumale. These three specific primer pairs were used independently of DNA extraction from tree seedlings or canned truffles. Our process is specific, sensitive, convenient, and quick.J.P. Douet and D. Mabru have contributed equally to this work     

Lipids from <Emphasis Type="Italic">Halostachys caspica</Emphasis> and <Emphasis Type="Italic">Halocharis hispida</Emphasis>

The composition of lipids from the aerial parts of two species of halophytes from the family Chenopodiaceae, Halostachys caspica C. A. Mey. and Halocharis hispida Bge. was determined. Neutral lipids (NL, 62.1 and 54.2%, respectively) dominated the total lipids (TL) of these plants. More than a third of the NL were esters of aliphatic alcohols and phytosterols (FAE). Fatty acids 16:0, 18:1, and 18:2 dominated the acids of FAE; 16:0, 18:1, and 18:3, the phospholipids. The principal fatty acids of glycolipids were unsaturated acids (68.3 and 75.1%) with linolenic acid dominating (44.9 and 43.5%). Presented at the 7th International Symposium on the Chemistry of Natural Compounds, Tashkent, October 16–18, 2007. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 276–278, May–June, 2009.     

Prediction of retention times of polycyclic aromatic hydrocarbons and <Emphasis Type="Italic">n</Emphasis>-alkanes in temperature-programmed gas chromatography

We have developed an iterative procedure for predicting the retention times of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes during separations by temperature-programmed gas chromatography. The procedure is based on estimates of two thermodynamic properties for each analyte (the differences in enthalpy and entropy associated with movements between the stationary and mobile phases) derived from data acquired experimentally in separations under isothermal conditions at temperatures spanning the range covered by the temperature programs in ten-degree increments. The columns used for this purpose were capillary columns containing polydimethylsiloxane-based stationary phases with three degrees of phenyl substitution (0%, 5%, and 50%). Predicted values were mostly within 1% of experimentally determined values, implying that the method is stable and precise. Figure Predicted values were mostly within 1 % of experimentally determined values, thus implying that the method is stable and precise     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).     

Adsorption of <Emphasis Type="Italic">n</Emphasis>-Butanol from Aqueous Solutions on an Sn-Ga Electrode in the Absence of a Metal-Water Chemisorption Interaction

Data on the dependence of the differential capacitance on potential at the Sn-Ga/H₂O interface in 0.05 M solutions of Na₂SO₄ with various additives of n-butanol are obtained by a bridge method at a frequency of 420 Hz and a temperature of 32°C. In the region of potentials studied, the chemisorption interaction (Sn-Ga)-H₂O is completely absent. The adsorption parameters of n-butanol are obtained by a method of a regression analysis of these data. The data obtained are compared with similar data on various hydrophobic electrodes. Shown is that, on the Sn-Ga and Pb-Ga electrodes, whose “electronic” capacitance is similar, the free energies of adsorption of n-butanol are also similar but differ from the adsorption energy on electrodes of Hg, Bi-Ga, and Tl-Ga. The results that are obtained on an Sn-Ga electrode nicely fit a general correlation dependence between the reciprocal value of the electronic capacitance of various electrodes in the absence of a metal-water chemisorption interaction, (C _m ⁻¹ ), and the free energies of adsorption of molecules of n-butanol on these, ΔG _A ⁰ . The dependence of the free energies of adsorption of molecules of n-butanol in the absence of a metal-water chemisorption interaction on the magnitude of the electronic capacitance of the metal confirms the assumption that we had put forth previously that it is necessary to introduce corrections to criteria of hydrophilicity of metals based on a comparison of quantities ΔG _A ⁰ and potentials of cathodic peak of adsorption-desorption E _des, which are expressed in a rational scale. With the obtained correlation relationships taken into account, criteria of hydrophilicity are suggested, which take into account these correlation relationships.__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 884–892.Original Russian Text Copyright © 2005 by Emets, Damaskin.