Facile Synthesis and Catalytic Properties of β-Co（OH）2 and Mg（OH）2 Nanoplates

β-Co(OH)2 and Mg(OH)2 nanoplates were synthesized via a facile template-free hydrothermal approach.The different conditions of preparation and catalytic properties of the products were studied and discussed.The products were characterized by X-ray diffraction,transmission electron microscopy,scanning electron microscopy,selected area electron diffraction(SAED),and gas chromatograph.     

Controlled synthesis of single-crystalline Mg(OH)2 nanotubes and nanorods via a solvothermal process

The synthesis of Mg(OH)₂ one-dimensional (1D) nanostructures was systematically investigated in different solvents at various temperatures with Mg₁₀OH₁₈Cl₂·5H₂O nanowires as source materials. The results showed that the characters of the products, such as crystal size, shape, and structure, were strongly influenced by the solvent and temperature during the solvothermal process. 1D nanotubes of Mg(OH)₂, with 80-300 nm outer diameter, 30-80 nm wall thickness, and several tens of micrometers in length were obtained by choosing bidentate ligand solvents such as ethylenediamine and 1,6-diaminohexane as the reaction solvent. But when using monodentate ligand pyridine as the reaction solvent, the obtained samples showed nanorods morphology. The Mg(OH)₂ thus produced was analyzed by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution electron microscopy (HRTEM), and selected-area electron diffraction (SAED). The possible growth mechanism of the 1D nanostructure Mg(OH)₂ was discussed.     

A simple method of fabricating large-area α-MnO2 nanowires and nanorods

α-MnO₂ nanowires or nanorods have been selectively synthesized via the hydrothermal method in nitric acid condition. The α-MnO₂ nanowires hold with average diameter of 50 nm and lengths ranging between 10 and 40 μm, using MnSO₄·H₂O as manganese source; meanwhile, α-MnO₂ bifurcate nanorods with average diameter of 100 nm were obtained by adopting MnCO₃ as starting material. The morphology of α-MnO₂ bifurcate nanorods is the first one to be reported in this paper. X-ray powder diffraction (XRD), field scanning electron microscopy (FESEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM) were used to characterize the products. Experimental results indicate that the concentrated nitric acid plays a crucial role in the phase purity and morphologies of the products. The possible formation mechanism of α-MnO₂ nanowires and nanorods has been discussed.     

Hydrothermal synthesis of nickel hydroxide nanostructures in mixed solvents of water and alcohol

Nickel hydroxide nanosheets and flowers have been hydrothermally synthesized using Ni(CH₃COO)₂·4H₂O in mixed solvents of ethylene glycol (EG) or ethanol and deionized water at 200 °C for different time. The phase and morphology of the obtained products can be controlled by adjusting the experimental parameters, including the hydrothermal time and the volume ratio of water to EG or ethanol. The possible reaction mechanism and growth of the nanosheets and nanoflowers are discussed based on the experimental results. Porous nickel oxide nanosheets are obtained by heating nickel hydroxide nanosheets in air at 400 °C. The products were characterized by using various methods including X-ray diffraction (XRD), fourier transform infrared (FTIR), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), field emission scanning electron microscopy (FESEM). The electrochemical property of β-Ni(OH)₂ nanosheets was investigated through the cyclic voltammogram (CV) measurement.     

Facile Synthesis of Leaf-like Cu(OH)2 and Its Conversion into CuO with Nanopores

Leaf-like Cu(OH)₂ single crystals were synthesized via the controlled emulsion interface method using Span80 (sorbitan monooleate) as the stabilizer of the emulsion system. CuO products with nanopores could be simply obtained by the dehydration of Cu(OH)₂, while maintaining the strip-shaped architecture. The phase structures and morphologies were measured by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Experimental results showed that Cu(OH)₂ microleaves were single crystals and the growth direction seemed to be in [111] crystal plane of the orthorhombic Cu(OH)₂. The formation of the nanopores should be attributed to the water loss of the transformation from Cu(OH)₂ to CuO. The formation process of Cu(OH)₂ was investigated by taking TEM images at different stages of the reaction. The formed nanoparticles began to rearrange to form nanorods and microleaves possibly via edge-by-edge and side-by-side oriented-attachments because of the formation of larger crystals greatly reducing the interfacial energy. Besides, CuO microarchitectures exhibit blue shifts in UV-Vis spectra and possess larger band gaps compared with those of bulk crystals.     

Synthesis of magnetic nickel spinel ferrite nanospheres by a reverse emulsion-assisted hydrothermal process

Nickel ferrite nanospheres were successfully synthesized by a reverse emulsion-assisted hydrothermal method. The reverse emulsion was composed of water, cetyltrimethyl ammonium bromide, polyoxyethylene(10)nonyl phenyl ether, iso-amyl alcohol and hexane. During the hydrothermal process, β-FeO(OH) and Ni_0.75Fe_0.25(CO₃)_0.125(OH)₂·0.38H₂O (INCHH) nanorods formed first and then transformed into nickel spinel ferrite nanospheres. The phase transformation mechanism is proposed based on the results of X-ray powder diffraction, transmission electron microscopy and energy-dispersive X-ray spectroscopy, etc. Nickel ferrite may form at the end of the INCHH nanorods or from the solution accompanied by the dissolution of β-FeO(OH) and INCHH nanorods. The X-ray photoelectron spectroscopy analysis shows that a few Fe³⁺ ions have been reduced to Fe²⁺ ions during the formation of nickel ferrite. The maximum magnetization of the nickel ferrite nanospheres obtained after hydrothermal reaction for 30 h is 55.01 emu/g, which is close to that of bulk NiFe₂O₄.     

球磨-溶剂热诱导法合成WS2纳米棒及其摩擦性能

采用行星式高能球磨机，将WS₂与S粉末混合球磨，得到纳米片状结构的前驱体，然后添加分散剂聚乙二醇(PEG)用溶剂热诱导的方法使纳米片状前驱体发生结构转变，制备了棒状结构的WS₂纳米材料。用XRD、SEM、TEM等方法对WS₂纳米棒进行了形貌和结构表征，并对其作为润滑油添加剂的摩擦性能进行了初步的研究。     

Preparation and hydrogen permeation of BaCe0.95Nd0.05O3−δ membranes

A mixed proton–electron conducting perovskite made of BaCe_0.95Nd_0.05O_3−δ (BCN) was prepared by EDTA/citric acid complexing method. The precursor was characterized by differential scanning calorimetry (DSC), thermogravimetry (TG), and X-ray diffraction (XRD). In order to learn the perovskite formation process during the calcination, the intermediate, i.e. the sample calcined at 750 °C for 5 h, was investigated by scanning (STEM), energy-filtered (EFTEM), and high-resolution transmission electron microscopy (HRTEM) as well as electron energy-loss spectroscopy (EELS). The results revealed that the perovskite structure was formed via a solid-state reaction between barium–cerium mixed carbonate and cerium–neodymium mixed oxide particles. Dense mixed proton–electron conducting BCN membranes were made by pressing BCN powder followed by sintering. The microstructure of the sintered membranes was investigated by scanning electron microscopy (SEM). Hydrogen permeation through the BCN membrane was studied using a high-temperature permeator. The hydrogen permeation fluxes under wet conditions are higher than those under dry conditions, which is due to increased proton concentrations in the H⁺ hopping via OH groups. The hydrogen permeation increased with increasing hydrogen and steam concentrations in the feed. For a steam concentration of 15 vol.%, the hydrogen permeation flux reaches 0.026 ml/min cm².     

Surfactant effect on electrochemical-induced synthesis of α-Ni(OH)2

Nickel hydroxide films were electrosynthesized in the presence of different diluted surfactant solutions by galvanostatic electroprecipitation. Lamellar α-Ni(OH)₂ films are obtained using cationic surfactant cetyltrimethylammonium bromide (CTAB), anionic surfactant sodium dodecyl sulfate (SDS), and also neutral surfactant Tween® 80. The films were structurally and morphologically characterized by X-ray diffraction, thermal gravimetric analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy, and electrochemically by cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The results evidenced that SDS remains intercalated between the lamellae of α-Ni(OH)₂. Albeit the presence of CTAB and Tween® 80, it was noticed in FTIR spectra that the surfactants did not intercalate. The morphology was affected by the presence of different surfactants. All studied surfactants displaced the oxidation potential (E _O) of Ni²⁺/Ni³⁺ process to less positive values. Also, the presence of surfactants improved the electrode charge efficiency and the charge response for the same number of moles of nickel ions deposited. The ratio of the charge and frequency change is 4.4 times bigger for films deposited with SDS when compared with pure α-Ni(OH)₂ films.     

Preparation and Magnetic Property of La0.7Sr0.3MnO3 Nanorod by Combination Sol-Gel with Molten Salt

La0.7Sr0.3MnO3（LSMO） nanorods were synthesized by a method combining sol-gel with molten salts at 950 ℃ for 10 h, which employed KCl＋NaCl（mass ratio 4：1） as eutectic molten salts. The morphologies and magnetic properties of the resulting LSMO nanorods were investigated by X-ray diffraction（XRD）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, and vibrating sample magnetometer（VSM） measurements. It was found that the obtained perovskite manganite LSMO was a uniform nanorod with a diameter of about 50 nm and a length of longer than 500 rim. The Curie temperature（To） of the LSMO nanorod used here was 262 K, much lower than that of bulky single crystal LSMO（360 K）. The low Curie temperature might be a result of the great disorder near the grain boundary, which could be observed clearly from the TEM picture.     

Solvent and thiourea adsorption/intercalation effects on the solid-state electrochemistry of α-phase nickel hydroxide nanoparticles

Nanoparticles of α-phase nickel hydroxide were synthesized by a single-step hydrothermal method using urea as the hydrolytic agent. Precipitated powders were of pure turbostratic α-phase as confirmed by x-ray diffraction profile. The ageing of α-Ni(OH)₂ in 1.0 M alkali solutions is investigated for pure non-intercalated α-Ni(OH)₂ and thiourea intercalated/absorbed α-phase nanomaterials. The α-Ni(OH)₂ powder immobilized on the surface of graphite electrodes shows a gradual α→β phase transformation with continuous voltammetric cycling, and the concentration gradient of water that exists in the layered-double-hydroxide-like interlayers of α-phase and the solution was shown to play a crucial role on the high electrochemical activity of this phase nickel hydroxide. To understand the role of water in the ageing process, concomitant entries of non-aqueous solvents like ethanol and acetonitrile along with thiourea were effected. Cyclic voltammetric measurements of thiourea-treated α-Ni(OH)₂ samples revealed that hydroxyl ion influx during the anodic oxidation depends on the counter flux of solvent molecules, and if the intercalated the solvent is acetonitrile, then the electrochemical activity of α-Ni(OH)₂ reduced drastically; Q _a/Q _c>1 for water as solvent in the interlayers α-Ni(OH)₂ and Q _a/Q _c<1 for ethanol and acetonitrile as solvents. The α-phase gets stabilized in the presence of thiourea with water and ethanol as co-intercalates. Transmission electron microscope images of α-Ni(OH)₂ and thiourea-treated samples show a change in particle size and morphology. Elemental CHNS analysis confirms the presence of sulphur in the thiourea intercalated samples.     

Lithium electrochemistry of NiSe2: A new kind of storage energy material

NiSe₂ thin film has been successfully fabricated by reactive pulsed laser deposition and was investigated for its electrochemistry with lithium for the first time. The reversible discharge capacities of NiSe₂/Li cells cycled between 1.0 V and 3.0 V were found in the range of 314.9–467.5 mA h g⁻¹ during the first 200 cycles. By using ex situ X-ray diffraction, transmission electron microscopy, and selected-area electron diffraction measurements, the intermediates of β-NiSe, and Ni₃Se₂ were identified during the reversible conversions of NiSe₂ into metal nickel and Li₂Se. Both cation (nickel) and anion (selenium) in NiSe₂ provide the redox active centers in its electrochemical reaction with lithium, indicating one of the features of its lithium electrochemistry. The high reversible capacity and good cycle ability of NiSe₂ electrode made it become a promising cathode material for future rechargeable lithium batteries.     

Porous cobalt oxide (Co3O4) nanorods: Facile syntheses, optical property and application in lithium-ion batteries

We developed a facile synthetic route of porous cobalt oxide (Co₃O₄) nanorods via a microemulsion-based method in combination with subsequent calcination process. The porous structure was formed by controlled decomposition of the microemulsion-synthesized precursor CoC₂O₄ nanorods without destruction of the original morphology. The as-prepared Co₃O₄ nanorods, consisting of small nanoparticles with diameter of 80–150 nm, had an average diameter of 200 nm and a length of 3–5 μm. The morphology and structure of synthesized samples were characterized by transmission electron microscopy and scanning electron microscopy. The phase and composition were investigated by X-ray powder diffraction and X-ray photoelectron spectroscopy. The optical property of Co₃O₄ nanorods was investigated. Moreover, the porous Co₃O₄ nanorods exhibited high electrochemical performance when applied as cathode materials for lithium-ion batteries, which gives them good potential applications.     

Formation of α-Fe2O3/FeOOH nanostructures with various morphologies by a hydrothermal route and their photocatalytic properties

A series of α-Fe₂O₃/FeOOH nanostructures with different morphologies have successfully been synthesized based on K₄[Fe(CN)₆] at 140 °C by a novel hydrothermal method. The morphology and phase of α-Fe₂O₃/FeOOH can be controlled by adjusting the reaction time. UV–vis absorption spectrum, X-ray powder diffraction, and transmission electron microscopy analyses were used to characterize the resulting products. A detailed, rational mechanism is proposed for the formation of α-Fe₂O₃/FeOOH nanostructures. The potential applications of the as-synthesized α-Fe₂O₃/FeOOH nanoparticles with different morphologies on photocatalytic decomposition of salicylic acid were also investigated.     

Single-crystal characterization of Co7(OH)6(H2O)3(C4H4O4)47H2O; A new cobalt succinate identified through high-throughput synthesis

A new form of cobalt succinate has been discovered using high-throughput methods and its structure was solved by single crystal X-ray diffraction. Co₇(C₄H₄O₄)₄(OH)₆(H₂O)₃7H₂O crystallizes in the monoclinic space group P2₁/c with cell parameters: a=7.888(2) Å, b=19.082(6) Å, c=23.630(7) Å, β=91.700(5)°, V=3555(2) Å³, R₁=0.0469. This complex structure, containing 55 crystallographically distinct non-hydrogen atoms, is compared to the previously reported nickel phase, characterized using ab initio structure solution from synchrotron powder diffraction data.     

Controllable synthesis and growth mechanism of α-Co(OH)2 nanorods and nanoplates by a facile solution-phase route

A facile chemical precipitation route has been developed to control synthesis of α-cobalt hydroxide nanostructures with rod-like and plate-like morphologies. The α-Co(OH)₂ nanorods were achieved in large quantity when the experiments were carried out in the presence of a suitable shape-controlling reagent polyvinyl pyrrolidone (PVP), while the α-Co(OH)₂ nanoplates were obtained when the experiments were conducted in the absence of PVP, whilst keeping other experimental conditions constant. The chemical composition and morphologies of the as-prepared α-Co(OH)₂ nanoparticles were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of polymer PVP on the morphologies of α-Co(OH)₂ nanoparticles were discussed in detail. The results indicated that PVP played a key role for the formation of α-Co(OH)₂ nanorods. The growth mechanism of the as-synthesized nanorods and nanoplates were discussed in detail based on the experimental results. A possible growth mechanism has been proposed to illustrate the growth of α-Co(OH)₂ nanorods.     

Hierarchical chlorine-doped rutile TiO2 spherical clusters of nanorods: Large-scale synthesis and high photocatalytic activity

In this study, we report the synthesis of hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods photocatalyst on a large scale via a soft interface approach. This catalyst showed much higher photocatalytic activity than the famous commercial titania (Degussa P25) under visible light (λ>420 nm). The resulting sample was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), nitrogen adsorption, X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy, ¹H solid magic-angle spinning nuclear magnetic resonance (MAS-NMR) and photoluminescence spectroscopy. On the basis of characterization results, we found that the doping of chlorine resulted in red shift of absorption and higher surface acidity as well as crystal defects in the photocatalyst, which were the reasons for high photocatalytic activity of chlorine-doped TiO₂ under visible light (λ>420 nm). These hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods are very attractive in the fields of environmental pollutants removal and solar cell because of their easy separation and high activity.     

Hydrothermal synthesis of WO3·1/3H2O nanorods and study of their electrical properties

Crystalline tungsten oxide hydrate (WO₃·1/3H₂O) nanorods have been prepared by a hydrothermal process using Na₂WO₄·2H₂O and 4-phenylbutylamine as a structure-directing agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and thermal analysis techniques have been used to characterize the structure, morphology and composition of the nanorods. The WO₃·1/3H₂O nanorods are up to several hundred nanometers in length, and the widths and thicknesses are 40 and 8 nm, respectively. A study of the electric properties in the temperature range 170–730 °C and frequency range 5–13 MHz is reported. The obtained results show that the activation energies are about 0.07, 0.63 and 2.46 eV for o-WO₃·1/3H₂O, h-WO₃ and m-WO₃, respectively. The as-synthesized materials are promising for chemical and energy-related applications such as catalysts and electrochemical devices, and may be applied in rechargeable lithium-ion batteries.     

Ni(OH)2纳米管的制备、表征及电化学性能

以多孔氧化铝为模板, 在不同溶液浓度下, 用化学沉积法制备了氢氧化镍纳米管. 采用XRD, SEM, TEM和HRTEM等手段, 对产物的物相、表面形貌及微结构进行了表征. 结果表明所得产物是高纯度的氢氧化镍纳米管, 外径约为180～220 nm, 管壁厚20～30 nm. 将所制备的氢氧化镍纳米管制成电极, 其电化学性能测试表明, Ni(OH)₂纳米管的中空结构特点, 能够有效地提高镍电极的充电效率、放电比容量、高倍率及高温放电性能. 机理分析表明中空结构的Ni(OH)₂纳米管对于提高碱性二次电池的综合性能有着极为重要的意义.     

Characterization of h-WO3 nanorods synthesized by hydrothermal process

Hexagonal tungsten oxide nanorods have been synthesized by hydrothermal strategy using Na₂WO₄·2H₂O as tungsten source, aniline and sulfate sodium as structure-directing templates. Techniques X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy have been used to characterize the structure, morphology and composition of the nanorods. The h-WO₃ nanorods are up to 5 μm in length, and 50–70 nm in diameter.