Corrosion inhibition performance of 2-ethyl phenyl-2, 5-dithiohydrazodicarbonamide on Fe (110)/Cu (111) in acidic/alkaline solutions: Synthesis,experimental, theoretical,and molecular dynamic studies

Herein, 2-ethyl phenyl-2,5-dithiohydrazodicarbonamide (2EPDCA) was synthesised and tested as a corrosion inhibitor for mild steel (MS) and copper (Cu) in 1 M HCl and 3.5% NaCl, respectively. Fourier transform infrared spectroscopy (FT-IR) and (NMR) nuclear magnetic resonance (¹H, ¹³C) were used to identify the chemical structure. Both experimental and computational approaches have been conducted to evaluate inhibitor efficiency on both metal systems. The electrochemical results showed that the 2EPDCA inhibition efficiency for MS systems was 95% at 1 × 10^?2 M, while in copper systems it was 97.5% at 1 × 10^?2 M. The Langmuir adsorption isotherm was fitted using adsorption surface coverage data, and for inhibitor in both systems, the kind of adsorption was mixed (physisorption and chemisorption). Through scanning electron microscopy (SEM), EDX, and atomic force microscopy (AFM) tests, we have confirmed the presence of the inhibitor molecules on the metal surface in both systems. Quantum chemistry simulations indicate that the superior corrosion inhibition efficacy of 2EPDCA on copper compared to mild steel surfaces is attributable to the former's greater electron donating propensity on copper. The adsorption of 2EPDCA molecules on Fe (110) and Cu (111) surfaces was further verified by molecular dynamic simulations, with the former having a greater adsorption energy. The results indicate that the corrosion inhibitor was effective even in harsh conditions, and it can be thought of as a novel corrosion inhibitor for mild steel and copper that provides good protection.     

MPEC-IMI as an effective green inhibitor to protect Q235 steel in 0.5 M HCl medium

Imidazole (IMI)-based polyethylene glycol monomethyl ether (MPEC-IMI) as a novel green corrosion inhibitor was synthesized to protect the Q235 steel in 0.5 M HCl corrosive medium at 318 K. The inhibition performance of MPEC-IMI was investigated by weight loss measurement, the electrochemical method (Tafel and EIS) and surface analysis (SEM and EDX). The results reveal that the MPEC-IMI shows enhanced anticorrosion performance for carbon steel, which is attributed to the formation of the adsorptive protection film on the surface, and the type of adsorption basically obeys the Langmuir monolayer adsorption. Furthermore, when the concentration of MPEC-IMI is 300 mg L^?1, the corrosion inhibition efficiency can reach up to 92.00%. In support of further study of the corrosion inhibition behavior by virtue of quantum chemical calculation and molecular dynamics simulations, the results show that the MPEC-IMI molecule has high reactivity and strong interaction on the iron surface.     

Theoretical investigation of inhibition of the corrosion of A106 steel in NaCl solution by di-n-butyl bis(thiophene-2-carboxylato-O,O′)tin(IV)

This work reports results from potentiodynamic polarisation and impedance investigation, with a rotating disc electrode, of inhibition of corrosion of A106 steel in aerated, unstirred 3.0 % NaCl solutions using di-n-butyl bis(thiophene-2-carboxylato-O,O′)tin(IV) as inhibitor. These studies showed that it is a mixed-type inhibitor. Inhibition efficiency increased with increasing di-n-butyl bis(thiophene-2-carboxylato-O,O′)tin(IV) concentration and decreases with increasing solution temperature. Maximum efficiency of inhibition of the inhibitor of approximately 78 % is observed at a concentration at 10^?2 M. The inhibition process was attributed to formation of an adsorbed film on the metal surface that protects the metal against corrosive agents. The adsorption isotherm confirms the applicability of Langmuir equation to describe the adsorption process. Thermodynamic functions for the adsorption process were determined. The efficiency of corrosion inhibitors and global chemical reactivity depend on such properties as energy of the highest occupied molecular orbital (E _HOMO), energy of the lowest unoccupied molecular orbital (E _LUMO), energy gap (ΔE), which were calculated. All calculation was been performed by density functional theory (DFT) using the Gaussian03W suite of software. Calculated results were usually in agreement with the experimental data.     

Insights into the inhibition mechanism of a novel supramolecular complex towards the corrosion of mild steel in the condensate water: experimental and theoretical studies

A supramolecular complex (HPDA) based on (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) and octadecylamine (ODA) exhibited a favourable inhibiting effect on the corrosion of mild steel (MS) in the condensate water. The structural properties of HPDA, including the apparent association constant (κ) and the optimal spatial configuration, were clarified using phase solubility simulation and molecular mechanics calculations. The results indicated that HPDA was fairly stable in water with a κ value of 9199 mol^?1, and its four possible configurations might coexist. The corrosion inhibition effect of HPDA was collectively evaluated by both experimental and theoretical methods. Weight loss measurements showed that the inhibition efficiency of HPDA depended on the concentration and temperature, and the maximum value could reach 92.6% with 50 mg L^?1 concentration at 313 K. The potentiodynamic polarization tests showed that HPDA was a mixed type inhibitor with a predominantly anodic type. Also, the polarization resistance was effectively enhanced in the presence of HPDA according to the results of electrochemical impedance spectroscopy. Adsorption experiments revealed that HPDA inhibited the corrosion of MS by a chemisorption mechanism, which was well described by the Langmuir model. Surface analyses based on X-ray photoelectron spectroscopy and Auger electron spectroscopy disclosed that the chemisorption of HPDA on the MS surface resulted from the self-assembly of guest molecules (ODA) with a tilted orientation. In addition, an apparent connection was ascertained between the adsorption measurements and the theoretical parameters (Mulliken charges and molecular electrostatic potential plot) using quantum chemical calculations.     

Experimental, quantum chemical calculations, and molecular dynamic simulations insight into the corrosion inhibition properties of 2-(6-methylpyridin-2-yl)oxazolo[5,4-f][1,10]phenanthroline on mild steel

2-(6-Methylpyridin-2-yl)oxazolo[5,4-f][1,10]phenanthroline (MOP) was synthesized and characterized by elemental analysis and Fourier-transform infrared (FT-IR), ¹H nuclear magnetic resonance (NMR), and ¹³C NMR spectra. MOP was evaluated as a corrosion inhibitor for carbon steel in 0.5 M H₂SO₄ solution using the standard gravimetric technique at 303–333 K. Quantum chemical calculations and molecular dynamic (MD) simulations were applied to analyze the experimental data and elucidate the adsorption behavior and inhibition mechanism of MOP. Results obtained show that MOP is an efficient inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in MOP concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using statistical physics were calculated and discussed. The adsorption of MOP was found to involve both physical and chemical adsorption mechanisms. Density functional theory (DFT) calculations suggest that nitrogen and oxygen atoms present in the MOP structure were the active reaction sites for the inhibitor adsorption on mild steel surface via donor–acceptor interactions between the lone pairs on nitrogen and oxygen atoms together with the π-electrons of the heterocyclic and the vacant d-orbital of iron atoms. The adsorption of MOP on Fe (1 1 0) surface was parallel to the surface so as to maximize contact, as shown in the MD simulations. The experiments together with DFT and MD simulations provide further insight into the mechanism of interaction between MOP and mild steel.     

Study of the Inhibition Efficiency for Some Novel Surfactants on the Carbon Steel (Type H-11) Pipelines in 0.5 M HCl Solution by Potentiodynamic Technique

In this article, three deferent surfactants as corrosion inhibitor were prepared in two steps. In the first step, maleic anhydride was amidated with dodecylamine to produce 2-ene-4-dodecanamide butanoic acid. In the second step, the resulting product was further esterified with different molecular weights of polyethylene glycol (m.wt. = 200, 400, and 600), namely, polyoxy ethylenyl-x-ene-4-dodecanamide butanoic acid, where x = 2, 4, or 6 according to molecular weights of polyethylene glycol used). The chemical structures of these inhibitors were confirmed by FTIR and ¹H NMR. The corrosion inhibition effect of the synthesized inhibitors has been investigated on the carbon steel (type H-11) pipelines in 0.5 M HCl solution by the potentiodynamic polarization method. From the obtained results, it was found that the maximum inhibition efficiency (90.44%) was exhibited by polyoxy ethylenyl-6-ene-4-dodecanamide butanoic acid, while the minimum inhibition efficiency (79.84%) was obtained by polyoxy ethylenyl-2-ene-4-dodecanamide butanoic acid at 200 ppm and 35°C. Also, the values of activation energy and thermodynamic parameters were calculated and discussed. Adsorption of the synthesized inhibitors was found to follow the Langmuir's adsorption isotherm. Mixed physical and chemical adsorption mechanism is proposed.     

Quaternary Ammonium Salts from Hydrolyzed Fatty Oil Based on Novel Tertiary Amines Used as Corrosion Inhibitors for Pipelines Carbon Steel at Acid Job in Petroleum Industry

Ten new quaternary ammonium salts (QASs) were designed and synthesized from hydrolyzed fatty oils; the hydrolyzed oils were used as a source of alkyl halides to prepare the QASs by refluxing the fatty alkyl halide with ethoxylated amines as untraditional 3° amines in acetone. The structure of the prepared QASs were characterized by FTIR and ¹H NMR spectroscopy. The prepared cationic surfactants QASs were tested as corrosion inhibitors for carbon steel in 1 M HCl solution. The corrosion inhibition efficiency was measured using weight loss and potentiodynamic polarization methods. The inhibition efficiencies obtained from the two employed methods are in good agreement with each other. In generally, the inhibition efficiency increased with increasing the inhibitor concentration. From the obtained data it was found that the inhibition efficiency of QASs, which, based on ethoxylated aromatic tertiary amine, is greater than the efficiencies of the QASs based on ethoxylated aliphatic tertiary amine. The QASs based on fatty alkyl halide from palm oil exhibited the best inhibition efficiency than QASs based on fatty alkyl halides from coconut oil. The potentiodynamic polarization measurements indicated that the inhibitors are of mixed type. The adsorption of the inhibitors on the carbon steel surface in the acid solution was found to obey Langmuir's adsorption isotherm. The free energy of adsorption processes was calculated and discussed. The surface active properties were calculated on the basic of surface tension measurements. The obtained data of inhibition efficiencies were discussed on the light of surface active properties of these QASs and their chemical structures. The quantum chemical calculations was proceeded for QHL1,4,5 and QHP3,4,5 the following quantum chemical indices such as the bond length, bond angle, charge density distribution, highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), energy gap ΔE?HOMO –LUMO, and dipole moment (u) were considered.The surface morphology of carbon steel sample was investigated by scanning electron microscopy.     

Synthesis and evaluation of bipyrazolic derivatives as inhibitors of corrosion of C38 steel in molar hydrochloric acid

Methyl 2-(bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amino) acetate, BT36, and methyl 2-(bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amino)-3-(1H-indol-3-yl)propanoate, BT 43, have been synthesized. Investigation by weight-loss measurement and use of electrochemical techniques revealed the compounds are very effective inhibitors of corrosion of C38 steel in 1 M HCl solutions—percentage protection exceeded 95 % for BT43 at concentrations as low as 10^?2 M. An impedance study in the absence and presence of these compounds revealed the mechanism of protection was cathodic inhibition by polarization and charge-transfer. The Langmuir adsorption isotherm was obeyed. Quantum chemical data calculated by use of DFT at the B3LYP/6-31G* level of theory revealed a good correlation between inhibition efficiency and the molecular structure of BT36 and BT43. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, the separation energy (ΔE), and the dipole moment (μ) from the inhibitor to the metal surface explain the experimental data well.     

Inhibition of CTAB on the Corrosion of Mild Steel in Hydrochloric Acid

The inhibition effect of cetyl trimethyl ammonium bromide (CTAB) on the corrosion of mild steel in 1.0 mol L^?1 hydrochloric acid (HCl) has been studied at different temperatures (25–60°C) by weight loss and potentiodynamic polarization methods. The results reveal that CTAB behaves as an effective inhibitor in 1.0 mol L^?1 HCl, and the inhibition efficiency increases with the inhibitor concentration. Polarization curves show that CTAB is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarizations are in good agreement. The effect of immersion time on corrosion inhibition has also been examined and is discussed. The adsorption of inhibitor on mild steel surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. The inhibition effect is satisfactorily explained by the parameters.     

Inhibition of Mild Steel Corrosion in 1 M Hydrochloric Acid Using (E)-(4-(4-methoxybenzylideneamino)-4H-1,2,4-triazole-3,5-diyl) Dimethanol (MBATD)

The inhibition of mild steel corrosion in 1 M HCl by (E)-(4-(4-methoxybenzylideneamino)-4H-1, 2,4-triazole-3,5-diyl) dimethanol (MBATD) was investigated by polarization, AC impedance, thermodynamic, molecular dynamics, and quantum chemical studies. Polarization studies revealed that MBATD act as mixed type inhibitor. Adsorption followed the Langmuir mode with a negative value of free energy, which indicates a stable and spontaneous inhibition process. To understand the energy changes associated with various thermodynamic and kinetic processes, different calculations were made. The correlation between inhibitive action and molecular structure is ascertained through quantum chemical calculations. The adsorption behavior of the inhibitor molecule on mild steel surface has been theoretically computed using molecular dynamics and density functional theory.     

Influence of pyridazine derivative on corrosion inhibition of mild steel in acidic media

The inhibition behavior of 6-methyl-4,5-dihydropyridazin-3(2H)-one (MDP) on corrosion of mild steel in 1 M HCl and 0.5 M H₂SO₄ was investigated using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) measurements. The results indicated that the corrosion inhibition efficiency depends on concentration, immersion time, solution temperature, and the nature of the acidic solutions. It is also noted that MDP is at its the most efficient in 1 M HCl and least in 0.5 M H₂SO₄. The effect is more pronounced with MDP concentration. It is found that the inhibition efficiency attains 98 % at 5 × 10^?3 M in 1 M HCl and 75 % at 5 × 10^?2 in 0.5 M H₂SO₄. Polarization measurements showed that the MDP acts as a mixed inhibitor. EIS diagrams showed that the adsorption of MDP increases the transfer resistance and decreases the capacitance of the interface metal/solution. From the temperature studies, the activation energies in the presence of MDP were found to be superior to those in uninhibited medium. Finally, a mechanism for the adsorption of MDP was proposed and discussed.     

Chitosan as an eco-friendly inhibitor for copper corrosion in acidic medium: protocol and characterization

Natural biopolymer chitosan organic compound (COC) has been used as a copper corrosion inhibitor in molar hydrochloric medium. This study was conducted by weight loss, polarization curves and electrochemical impedance spectroscopy measurements. Scanning electron microscopy, energy dispersive X-ray spectrometry and atomic force microscopy studies were used to characterize the surface of uninhibited and inhibited copper specimens. The study of the temperature effect was carried out to reveal the chemical nature of adsorption. The inhibition efficiency tends to increase by increasing inhibitor concentration to reach a maximum of 87% at 10^?1 mg L^?1. The values of inhibitor efficiency estimated by different electrochemical and gravimetric methods indicate the performance of copper in HCl medium containing COC. Adsorption of COC was found to follow the Langmuir adsorption isotherm. In order to get a better understanding of the relationship between the inhibition efficiency and molecular structure of COC, quantum chemical and molecular dynamics simulation approaches were performed to get a better understanding of the relationship between the inhibition efficiency and molecular structure of chitosan.     

Inhibition Effect of N-(Pyridin-2-yl-Carbamothioyl) Benzamide on the Corrosion of C-Steel in Sulfuric Acid Solutions

N-(Pyridin-2-yl-carbamothioyl)benzamide (PCMB) was newly synthesized and tested as a corrosion inhibitor for C-steel in 0.5 M H₂SO₄ using chemical and electrochemical techniques. Polarization measurements showed that the synthesized compound acted as a mixed inhibitor. The inhibition efficiencies obtained from the different methods were in good agreement. The inhibitive action of this compound is discussed in terms of blocking the electrode surface by adsorption of the inhibitor according to the Langmuir isotherm. The effect of temperature on the corrosion behavior in the absence and presence of 2.5 × 10^?5 M of PCMB was studied (283–308 K). The associated activation energies (E _a) and the thermodynamic parameters (ΔH*, ΔS*, K _ads, ΔG°_ads) for the adsorption process were determined. The ΔG°_ads value is ?36.55 kJ/mol, which indicated that the adsorption mechanism of PCMB on C-steel in 0.5 M H₂SO₄ solution was combined between physisorption and chemisorption processes.     

Role of novel oxazocine derivative as corrosion inhibitor for 304 stainless steel in acidic chloride pickling solutions

Inhibition of 304 stainless steel corrosion in acidic chloride pickling (1.0 M HCl) solutions by newly synthesized oxazocine derivative 4 as a corrosion inhibitor have been studied using weight loss, potentiodynamic polarization, and atomic absorption spectroscopy investigations. Potentiodynamic polarization curves show that the inhibitor behaves as a mixed-type. The adsorption of the inhibitor on the metal surface in the acid solution was found to obey Langmuir’s adsorption isotherm. The inhibition mechanism of the investigated inhibitor was discussed in terms of its adsorption on the metal surface. The relationship between the molecular structure and the inhibition efficiency was elucidated by quantum chemical calculations.     

The effect of 2-aminoquinoline-6-carboxylic acid on the corrosion behavior of mild steel in hydrochloric acid

The inhibitive effect of 2-aminoquinoline-6-carboxylic acid (AQC) against mild steel corrosion in 1?M HCl solutions was investigated using conventional weight loss, potentiodynamic polarization, linear polarization and electrochemical impedance spectroscopy methods. The weight loss results showed that AQC is an excellent corrosion inhibitor since its efficiency increased with the concentration to attain 91.8?% at 500?mg?l^?1. Electrochemical polarization measurements revealed that AQC acted as a mixed-type inhibitor and the results of electrochemical impedance spectroscopy have shown that the change in the impedance parameters, charge transfer resistance and double layer capacitance, with the change in concentration of the inhibitor is due to the adsorption of the molecule leading to the formation of a protective layer on the surface of mild steel. The adsorption was assumed to occur on the steel surface through the active centers of the molecule. The inhibition action of AQC was discussed in view of Langmuir adsorption isotherm. Density functional theory calculations of quantum parameters were used to explain efficiency in relation with molecular structure.     

Theoretical Prediction of Adsorption Properties of Carmustine Drug on Various Sites of the Outer Surface of the Single-Walled Boron Nitride Nanotube and Investigation of Urea Effect on Drug Delivery by DFT and MD

In this work, the adsorption behavior of Carmustine (BCNU) drug over the (6,0) zigzag single-wall boron nitride nanotube (SWBNNT) is studied by means of density functional theory calculations and molecular dynamics simulations (MD). The calculated adsorption energies proved that the adsorption of BCNU molecule on SWBNNT is a physisorption process. The natural bond orbital calculations demonstrated that existence of a charge transfer from the SWBNNT to the BCNU molecule. Moreover, quantum theory of atoms in molecules showed that the hydrogen bonds and electrostatic interactions are two major factors contributed to the overall stabilities of the complexes. Furthermore, interaction of BCNU with the surface of single wall BNNT at 310 K and 1 bar in the present of water and different concentration of Urea molecules has been studied by MD simulation. The MD results confirm that the highest number of hydrogen bond and the lowest value of Lennard-Jones (L-J) energy between nanotube and drug exist in the simulation system with concentration of 1 mol L^?1 Urea.     

Electrochemical and Molecular Dynamics Evaluation on Inhibition Performance of 2-(1-Methyl-Nonyl)-Quinoline

A novel vapor phase inhibitor, 2-(1-methyl-nonyl)-quinoline, was designed to cope with top-of-line corrosion (TLC) in wet gas pipelines and characterized via electrochemical measurements, scanning vibrating electrode technique (SEVT), surface analysis techniques, and molecular dynamics methods. 2-(1-methyl-nonyl)-quinoline showed parallel adsorption and was predominantly a cathodic-type inhibitor. The inhibition efficiency increased with temperature (30–50°C) and pH (4.15–5.76), and reached 97.25% at a concentration of 0.0282 mol/L. The SEVT showed that the average current density of the X80 steel specimen without inhibitor (anode region, 6.58087 µA/cm²) was about 2.5 times that of the other with inhibitor (cathode region, ?2.61974 µA/cm²).     

Performance of some thiophene derivatives as corrosion inhibitors for 304 stainless steel in aqueous solutions

The inhibitive effect of 2-cyano-3-hydroxy-4(Ar)-5-anilino thiophene derivatives on the corrosion of 304 stainless steel (SS) in 3 M HCl solution has been investigated by weight loss, galvanostatic polarization techniques, and potentiodynamic anodic polarization in 3.5 % NaCl. The results indicate that these compounds act as inhibitors retarding the anodic and cathodic corrosion reactions. The presence of inhibitors does not change the mechanism of either hydrogen evolution reaction or SS dissolution. The activation energy and some thermodynamic parameters are calculated and discussed. These compounds are mixed-type inhibitors in the acid solution, and their adsorption on the SS surface is found to obey the Temkin adsorption isotherm. The results suggest that the percentage inhibition of these thiophene derivatives increases with increasing inhibitor concentration and decreases with increasing temperature. The synergistic parameter (S) was calculated and found to have a value greater than unity, indicating that the enhanced inhibition efficiency caused by the addition of I^?, SCN^?, and Br^? is only due to a synergistic effect. The relationship between molecular structure and inhibition efficiency was elucidated by quantum-chemical calculations using semi-empirical self-consistent field (SCF) methods.     

Inhibition of mild steel corrosion in 5 % HCl solution by 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione

A new corrosion inhibitor, namely 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione (5-HTT), has been synthesized and its influence on corrosion inhibition of mild steel in 5 % HCl solution has been studied using weight loss method and electrochemical measurements. Potentiodynamic polarization measurements clearly reveal that the investigated inhibitor is of mixed type, and it inhibits the corrosion of the steel by blocking the active site of the metal. Changes in impedance parameters were indicative of adsorption of 5-HTT on the metal surface, leading to the formation of protective films. The degree of the surface coverage of the adsorbed inhibitors was determined by weight loss measurements, and it was found that the adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of the temperature on the corrosion behavior with addition of 5 × 10^?4 M of the inhibitor was studied in the temperature range 30–60 °C. The reactivity of this compound was analyzed through theoretical calculations based on density functional theory to explain the different efficiency of these compounds as a corrosion inhibitor.     

Schiff’s base derived from the pharmaceutical drug Dapsone (DS) as a new and effective corrosion inhibitor for mild steel in hydrochloric acid

The inhibition ability of Dapsone’s Schiff’s base with salicylaldehyde (1:2) for mild steel corrosion in 1 M HCl solution at 308 K was studied by means of potentiodynamic polarization, electrochemical impedance spectroscopy techniques, and gravimetric analysis. Results showed that Dapsone salicylaldehyde performed well as a good inhibitor for mild steel in 1 M HCl solution with maximum inhibition efficiency of 95 % at 500 ppm. The adsorption isotherm of the inhibitor followed the Langmuir adsorption. The value of free energy of adsorption showed that it is a spontaneous process and followed typical physical adsorption.