Studies on the encapsulation of F- in single walled nanotubes of different chiralities using density functional theory calculations and Car-Parrinello molecular dynamics simulations

In this study, the encapsulation of F(-) in different nanotubes (NTs) has been investigated using electronic structure calculations and Car-Parrinello molecular dynamics simulations. The carbon atoms in the single walled carbon nanotube (CNT) are systematically doped with B and N atoms. The effect of the encapsulation of F(-) in the boron nitride nanotube (BNNT) has also been investigated. Electronic structure calculations show that the (7,0) chirality nanotube forms a more stable endohedral complex (with F(-)) than the other nanotubes. Evidence obtained from the band structure of CNT calculations reveals that the band gap of the CNT is marginally affected by the encapsulation. However, the same encapsulation significantly changes the band gap of the BNNT. The density of states (DOS) derived from the calculations shows significant changes near the Fermi level. The snapshots obtained from the CPMD simulation highlight the fluctuation of the anion inside the tube and there is more fluctuation in BNNT than in CNT.     

DFT Study of Physisorption Effect of the Curcumin on CNT(8,0-6) Nanotube for Biological Applications

In the given work the adsorption properties of molecule curcumin((1 E,6 E)-1,7-bis(4-hydroxy-3-methoxyphenyl)-1,6-heptadiene-3,5-dione) on CNT(8,0-6) nanotube were investigated by the density functional theory(DFT) in the solvent water for the first time. The non-bonded interaction effects of compounds curcumin and CNT(8,0-6) nanotube on the electronic properties, UV/Vis spectra, chemical shift tensors and natural charges were determined and discussed. The electronic spectra of the compound curcumin and the complex CNT(8,0-6)/curcumin in the solvent water were calculated by time dependent density functional theory(TD-DFT) for investigation of the maximum wavelength value of molecule Curcumin before and after the non-bonded interaction with the CNT(8,0-6) nanotube and molecular orbitals involved in the formation of absorption spectrum of the complex CNT(8,0-6)/curcumin at maximum wavelength.     

Preferential destruction of metallic single-walled carbon nanotubes by laser irradiation

Upon laser irradiation in air, metallic single-walled carbon nanotubes (SWNTs) in carbon nanotube thin film can be destroyed in preference to their semiconducting counterparts when the wavelength and power intensity of the irradiation are appropriate and the carbon nanotubes are not heavily bundled. Our method takes advantage of these two species' different rates of photolysis-assisted oxidation, creating the possibility of defining the semiconducting portions of carbon nanotube (CNT) networks using optical lithography, particularly when constructing all-CNT FETs (without metal electrodes) in the future.     

Alternate layer-by-layer adsorption of single- and double-walled carbon nanotubes wrapped by functionalized beta-1,3-glucan polysaccharides

A great deal of attention has been focused on exploiting novel methods to fabricate thin carbonaceous capsules from multiple components for advanced materials. A layer-by-layer (LbL) method is therefore being introduced to synthesize thin and multi-carbon nanotube (CNT)-based hollow capsules from CNT complexes with cationic or anionic complementarily functionalized beta-1,3-glucans as building-blocks. These ionic beta-1,3-glucans wrap around single-walled carbon nanotubes (SWNTs) and double-walled carbon nanotubes (DWNTs) to form water-soluble complexes with ionic groups on their exterior surface. Alternate self-assembly of these CNT complexes on the silica particles is demonstrated in solution by electrostatic interactions. The LbL adsorption processes were carefully monitored by zeta-potential measurements, frequency shifts of a quartz crystal microbalance (QCM), and electron micrographs. Silica particles were then dissolved away by HF acid to obtain CNT-based hollow capsules composed of SWNTs and DWNTs. We believe that these novel surface adsorption methods are useful for potential design of CNT-based advanced functional materials.     

Density Functional Theory Study of MoO3 Molecule Encapsulated inside Single-walled Carbon Nanotubes~

The binding energies, geometric structures and electronic properties of molybdenum trioxide (MoO3) molecule encapsulated inside (8,0), (9,0), (10,0) and (14,0) single-walled carbon nanotubes (SWNTs) have been investigated using density functional theory (DFT) method. Due to curvature effect, the calculated binding energy values are different, the variation of which indicated that the stability of MoO3 /SWNT systems increases with increasing the radius of SWNTs. At the same time, owing to the presence of MoO3 molecule, the band gap of MoO3 /SWNTs systems decreases. The analysis of density of states (DOS) reveals hybridization between C-2p and Mo-4d and between C-2p and O-2p orbitals near the Fermi level, which results in electron transfer from SWNTs to MoO3 molecule. The present computations suggest that electronic properties of SWNTs can be modified by doping MoO3 molecule.     

Distribution patterns and controllable transport of water inside and outside charged single-walled carbon nanotubes

The density distribution patterns of water inside and outside neutral and charged single-walled carbon nanotubes (SWNTs) soaked in water have been studied using molecular dynamics simulations based on TIP3P potential and Lennard-Jones parameters of CHARMM force field, in conjunction with ab initio calculations to provide the electron density distributions of the systems. Water molecules show different electropism near positively and negatively charged SWNTs. Different density distribution patterns of water, depending on the diameter and chirality of the SWNTs, are observed inside and outside the tube wall. These special distribution patterns formed can be explained in terms of the van der Waals and electrostatic interactions between the water molecules and the carbon atoms on the hexagonal network of carbon nanotubes. The electric field produced by the highly charged SWNTs leads to high filling speed of water molecules, while it prevents them from flowing out of the nanotube. Water molecules enter the neutral SWNTs slowly and can flow out of the nanotube in a fluctuating manner. It indicates that by adjusting the electric charge on the SWNTs, one can control the adsorption and transport behavior of polar molecules in SWNTs to be used as stable storage medium with template effect or transport channels. The transport rate can be tailored by changing the charge on the SWNTs.     

Rational chemical strategies for carbon nanotube functionalization

Whereas the chemistry of fullerenes is well-established, the chemistry of single-walled carbon nanotubes (SWNTs) is a relatively unexplored field of research. Investigations into the bonding of moieties onto SWNTs are important because they provide fundamental structural insight into how nanoscale interactions occur. Hence, understanding SWNT chemistry becomes critical to rational, predictive manipulation of their properties. Among the strategies discussed include molecular metal complexation with SWNTs to control site-selective chemistry in these systems. In particular, work has been performed with Vaska's and Wilkinson's complexes to create functionalized adducts. Functionalization should offer a relatively simple means of tube solubilization and bundle exfoliation, and also allows for tubes to be utilized as recoverable catalyst supports. Solubilization of oxidized SWNTs has also been achieved through derivatization by using a functionalized organic crown ether. The resultant adduct yielded concentrations of dissolved nanotubes on the order of 1 g L(-1) in water and at elevated concentrations in a range of organic solvents, traditionally poor for SWNT manipulation. To further demonstrate chemical processability of SWNTs, we have subjected them to ozonolysis, followed by treatment with various independent reagents, to rationally generate a higher proportion of oxygenated functional groups on the nanotube surface. This protocol has been found to purify nanotubes. More importantly, the reaction sequence has been found to ozonize the sidewalls of these nanotubes. Finally, SWNTs have also been chemically modified with quantum dots and oxide nanocrystals. A composite heterostructure consisting of nanotubes joined to nanocrystals offers a unique opportunity to obtain desired physical, electronic, and chemical properties by adjusting synthetic conditions to tailor the size and structure of the individual sub-components, with implications for self-assembly.     

Modulation of the electronic structure of semiconducting nanotubes resulting from different metal contacts

Examined in this paper is the role of the metal electrode influencing the structure and electronic properties of semiconducting carbon nanotubes near the interface at low bias. Specifically, we present quantum-chemical calculations of finite sections of a (8,0) semiconducting single wall nanotube contacted with gold and palladium clusters. The calculations at the density functional level of theory, which included full geometry optimizations, indicate the formation of bonds between the metal atoms of the electrode and the carbon atoms of the nanotube. The local work function of the metal electrode can be expected to exhibit significant variations as a result of this bond formation. Compared to the gold-contacted nanotubes, the palladium-contacted nanotubes have a small but interesting increase in both length and diameter. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the gold-contacted nanotube are shown localized at the edges. In contrast, the HOMO and LUMO of the palladium-contacted nanotube are extended over the entire nanotube and the metal cluster contacted to it, providing thereby a better conduction path in the contact region of the electrode and the nanotube. The involvement of the highly directional d orbitals in the interactions involving the palladium cluster leads to an enhanced pi electron density in the nanotube. This enhanced pi electron density is synonymous with an improved electron transmission.     

A DFT Investigation on the Co-adsorption of H_2 and Ions inside the Carbon Nanotube

We studied the co-adsorption of hydrogen molecule and ions (Li,K,Mg,Ca) inside the single-walled carbon nanotubes (SWNTs) by using density-functional theory (DFT).The band structures (BS),density of states (DOS),charge transfer and difference charge density are presented.We discussed the interaction between the ions (Li,K,Mg,Ca) and H 2.Meanwhile,the binding energy indicates that ionization can increase the adsorption energy of H 2 in CNT.     

Optical properties of ultrashort semiconducting single-walled carbon nanotube capsules down to sub-10 nm

Single-walled carbon nanotubes (SWNTs) are typically long (greater than or approximately equal 100 nm) and have been well established as novel quasi one-dimensional systems with interesting electrical, mechanical, and optical properties. Here, quasi zero-dimensional SWNTs with finite lengths down to the molecular scale (7.5 nm in average) were obtained by length separation using a density gradient ultracentrifugation method. Different sedimentation rates of nanotubes with different lengths in a density gradient were taken advantage of to sort SWNTs according to length. Optical experiments on the SWNT fractions revealed that the UV-vis-NIR absorption and photoluminescence peaks of the ultrashort SWNTs blue-shift up to approximately 30 meV compared to long nanotubes, owing to quantum confinement effects along the length of ultrashort SWNTs. These nanotube capsules essentially correspond to SWNT quantum dots.     

Carbon nanotubes in benzene: internal and external solvation

The structure and dynamics of benzene inside and outside of single-walled carbon nanotubes (SWNTs) in the (n,n) armchair configuration are studied via molecular dynamics computer simulations. Irrespective of the nanotube diameter, benzene molecules form cylindrical solvation shell structures on the outside of the nanotubes. Their molecular planes near the SWNTs in the first external solvation shell are oriented parallel to the nanotube surface, forming a π-stacked structure between the two. By contrast, the benzene distributions in the interior of the SWNTs are found to vary markedly with the nanotube diameter. In the case of the (7,7) and (8,8) nanotubes, internal benzene forms a single-file distribution, either in a vertex-to-vertex (n = 7) or face-to-face (n = 8) orientation between two neighboring molecules. Inside a slightly wider (9,9) nanotube channel, however, a cylindrical single-shell distribution of benzene arises. A secondary solvation structure, which begins to appear inside (10,10), develops into a full structure separate from the first internal solvation shell in (12,12). The ring orientation of internal benzene is generally parallel to the nanotube wall for n = 9-12, while it becomes either slanted with respect to (n = 7), or perpendicular to (n = 8), the nanotube axis. The confinement inside the small nanotube pores exerts a strong influence on the dynamics of benzene. Both translational and rotational dynamics inside SWNTs are slower and more anisotropic than in liquid benzene. It is also found that reorientational dynamics of internal benzene deviate dramatically from the rotational diffusion regime and change substantially with the nanotube diameter.     

Hexahydropyrimidin-2-one in nanotubes: Structural changes and conformational preferences

Investigation of conformational transformations of hexahydropyrimidin-2-one in the cavity of nanotubes with chirality indices (5,5) and (8,0) using DFT-method PBE/3ζ has shown that the encapsulated heterocyclic system has shortened С–N bonds, elongated С=О bond, bears an electric charge and is characterized by an increased potential barrier of interconversion as compared to the free molecule. In the case of (4,4) nanotube, a virtual reaction of the molecule in the cavity with the carbon atoms of the nanotube occurs.     

Influence of acid treatments of carbon nanotube precursors on Ni/CNT in the synthesis of carbon nanotubes

The Ni/CNT catalyst was fabricated by directly dipping carbon nanotube precursors refluxed in 4 M of nitric acid into Ni electroless plating bath, and used to synthesize new carbon nanotubes. The experimental results indicate that the duration of acid-treatment of carbon nanotubes precursors exerts a great influence on the catalysis of Ni/CNT in the synthesis of carbon nanotubes and hence the structures of the new carbon nanotubes. When the carbon nanotubes precursors were refluxed for 0.5 h in 4 M of nitric acid, bamboo-shaped carbon nanotubes (BSCNT) or Y junction carbon nanotubes in the carbon products were obtained. As the duration of acid-treatment of carbon nanotubes precursors increased to 6 h, the as-prepared Ni/CNT displayed higher activity, and the carbon nanotube products were high pure without any Y junction structure or any separation layers in hollow.     

椅型碳纳米管吸附氧原子的密度泛函理论研究

利用密度泛函B3LYP对有限长扶手椅形单壁碳纳米管(3,3),(4,4)和(5,5)吸附O原子的几何结构、电子属性、反应能和红外光谱进行了系统地理论研究,获得了一些有意义的结果,主要包括如下4个方面:(1)2个O原子吸附在管外壁垂直于管轴的C—C键形成开环的轮烯结构,吸附在管内壁形成环氧结构;(2)O原子吸附在管外壁要比吸附在管内壁具有较大的能隙和吸附反应能;(3)与单壁碳纳米管管外壁吸附1个O原子相比,2个O原子吸附在管外壁具有较大的吸附反应能;(4)B3LYP得到的C—O伸缩振动频率与实验一致.     

Protonation of carbon single-walled nanotubes studied using 13C and 1H-13C cross polarization nuclear magnetic resonance and Raman spectroscopies

The reversible protonation of carbon single-walled nanotubes (SWNTs) in sulfuric acid and Nafion was investigated using solid-state nuclear magnetic resonance (NMR) and Raman spectroscopies. Magic-angle spinning (MAS) was used to obtain high-resolution 13C and 1H-13C cross polarization (CP) NMR spectra. The 13C NMR chemical shifts are reported for bulk SWNTs, H2SO4-treated SWNTs, SWNT-Nafion polymer composites, SWNT-AQ55 polymer composites, and SWNTs in contact with water. Protonation occurs without irreversible oxidation of the nanotube substrate via a charge-transfer process. This is the first report of a chemically induced change in a SWNT 13C resonance brought about by a reversible interaction with an acidic proton, providing additional evidence that carbon nanotubes behave as weak bases. Cross polarization was found to be a powerful technique for providing an additional contrast mechanism for studying nanotubes in contact with other chemical species. The CP studies confirmed polarization transfer from nearby protons to nanotube carbon atoms. The CP technique was also applied to investigate water adsorbed on carbon nanotube surfaces. Finally, the degree of bundling of the SWNTs in Nafion films was probed with the 1H-13C CP-MAS technique.     

高性能核壳结构催化剂PdRu@Pt/CNT的制备

采用两步沉积还原法制备了一种以PdRu合金为核、以铂为壳,以碳纳米管(CNT)为载体的核壳结构低铂催化剂PdRu@Pt/CNT.该催化剂对于甲醇催化氧化的单位位质量铂的活性可达自制20%Pt/CNT催化剂的1.7倍,且其正扫和反扫峰的峰电流密度之比(/_f//_b)高达2,是Pt/CNT催化剂/_f//_b值的2倍,表明通过将活性组分铂分散在PdRu核上,有效地提高了金属铂的分散度和铂的利用率,且通过壳层铂原子与核中钌及钯的相互作用,大大提高了催化剂对甲醇氧化中间体的去除能力.X射线衍射(XRD)和透射电子显微镜(TEM)的结果揭示了催化剂的核壳结构.另外,从TEM还可以看出:活性组分均匀地分布在碳纳米管载体上,活性组分粒径约为4.0 nm.由于这种催化剂能够有效提高铂的利用效率,并且有效消除甲醇氧化中间体,在低温燃料电池领域具有良好的应用前景.     

Protein-assisted solubilization of single-walled carbon nanotubes

We report a simple method that uses proteins to solubilize single-walled carbon nanotubes (SWNTs) in water. Characterization by a variety of complementary techniques including UV-Vis spectroscopy, Raman spectroscopy, and atomic force microscopy confirmed the dispersion at the individual nanotube level. A variety of proteins differing in size and structure were used to generate individual nanotube solutions by this noncovalent functionalization procedure. Protein-mediated solubilization of nanotubes in water may be important for biomedical applications. This method of solubilization may also find use in approaches for controlling the assembly of nanostructures, and the wide variety of functional groups present on the adsorbed proteins may be used as orthogonal reactive handles for the functionalization of carbon nanotubes.     

Titanium coverage on a single-wall carbon nanotube: molecular dynamics simulations

The minimum energy structures of Ti covered (8,0) single-wall carbon nanotube (SWNT) have been investigated theoretically. Using available experimental data and the results of density functional theory calculations, we first parametrized a reliable empirical many-body potential energy function (PEF) for the CTi binary system. The PEF used in the calculations includes two- and three-body atomic interactions. Then performing molecular dynamics simulations at 1 and 300 K, we obtained the minimum-energy configurations for Ti covered (8,0)-SWNT. The configurations reported here include low and high coverage of Ti on nanotubes. We have found that one layer of Ti did not distort the nanotube significantly, whereas two-layer coverage showed an interesting feature: the second layer of Ti pushed the first layer inside the wall of nanotube, but the general shape of the nanotube was not affected so much.     

Metal induced molecular nano-extraction

We have previously devised a “scorpion” like system which is composed of a zigzag (8,0) single walled carbon nanotube attached to a 20 ringed graphene sheet by a glycine dimer species. Theoretical density functional theory calculations on a potential mechanism driven by a metal induced charge transfer process has been proposed for the extraction of molecules from nanotubes.