A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

A novel cadmium(II) coordination polymer with biphenyl‐3,3′,4,4′‐tetra­carboxylic acid and 4,4′‐bipyridine

A novel cadmium(II) coordination polymer, poly[[[bis­(4,4′‐bipyridine)cadmium(II)]‐μ₃‐4,4′‐dicarboxy­biphenyl‐3,3′‐di­carboxyl­ato] 0.35‐hydrate], {[Cd(C₁₆H₈O₈)(C₁₀H₈N₂)₂]·0.35H₂O}_n, was obtained by reaction of Cd(CH₃COO)₂·3H₂O, 4,4′‐bipyridine (4,4′‐bpy) and biphenyl‐3,3′,4,4′‐tetra­car­boxylic acid (H₄L) under hydro­thermal conditions. Each Cd^II atom lies at the centre of a distorted octa­hedron, coordinated by four O atoms from three H₂L²⁻ ligands and N atoms from two monodentate 4,4′‐bpy ligands. Each H₂L²⁻ ligand coordinates to three Cd^II atoms through two carboxyl­ate groups, one acting as a bridging bidentate ligand and the other in a chelating bidentate fashion. Two Cd atoms, two H₂L²⁻ anions and four 4,4′‐bpy ligands form a ring dimer node, which links into an extended broad zonal one‐dimensional chain along the c axis.     

Chlorido(dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐κ2N,N′)(η5‐pentamethylcyclopentadienyl)rhodium(III) chloride 1‐hydroxypyrrolidine‐2,5‐dione disolvate

The title complex, [Rh(C₁₀H₁₅)Cl(C₁₄H₁₂N₂O₄)]Cl·2C₄H₅NO₃, has been synthesized by a substitution reaction of the precursor [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]chlorido(pentamethylcyclopentadienyl)rhodium(III) chloride with NaOCH₃. The Rh^III cation is located in an RhC₅N₂Cl eight‐coordinated environment. In the crystal, 1‐hydroxypyrrolidine‐2,5‐dione (NHS) solvent molecules form strong hydrogen bonds with the Cl⁻ counter‐anions in the lattice and weak hydrogen bonds with the pentamethylcyclopentadienyl (Cp*) ligands. Hydrogen bonding between the Cp* ligands, the NHS solvent molecules and the Cl⁻ counter‐anions form links in a V‐shaped chain of Rh^III complex cations along the c axis. Weak hydrogen bonds between the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate ligands and the Cl⁻ counter‐anions connect the components into a supramolecular three‐dimensional network. The synthetic route to the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐containing rhodium complex from the [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]rhodium(III) precursor may be applied to link Rh catalysts to the surface of electrodes.     

A hydrostable and twofold interpenetrating three‐dimensional zinc–organic framework with rob topology based on 4,4′‐oxydibenzoate and 3,3′‐dimethyl‐4,4′‐bipyridine ligands

Metal–organic frameworks (MOFs) are a new class of porous materials that have received widespread attention due to their potential applications in gas storage and/or separation, catalysis, luminescence, and so on. The title compound, poly[[(μ₂‐3,3′‐dimethyl‐4,4′‐bipyridine‐κ²N:N′)bis(μ₄‐4,4′‐oxydibenzoato‐κ⁴O:O′:O′′:O′′′)dizinc] tetrahydrate], {[Zn₂(C₁₄H₈O₅)₂(C₁₂H₁₂N₂)]·4H₂O}_n, has been prepared by the solvothermal assembly of Zn(NO₃)₂·6H₂O, 4,4′‐oxydi(benzoic acid) and 3,3′‐dimethyl‐4,4′‐bipyridine. The two Zn^II atoms adopt the same five‐coordinated distorted square‐pyramidal geometry (i.e. ZnO₄N), bonding to four O atoms from four different 4,4′‐oxydibenzoate (oba) ligands and one N atom from a 3,3′‐dimethyl‐4,4′‐bipyridine (dmbpy) ligand. The supramolecular secondary building unit (SBU) is a paddle‐wheel [Zn₂(COO)₄] unit and these units are linked by oba ligands within the layer to form a two‐dimensional net parallel to the b axis, with the dmbpy ligands pointing alternately up and down, which is further extended by dmbpy ligands to form a three‐dimensional framework with rob topology. The single net leaves voids that are filled by mutual interpenetration of an independent equivalent framework in a twofold interpenetrating architecture. The title compound shows thermal stability up to 673 K and is stable in aqueous solutions in the pH range 5–9. Excitation and luminescence data observed at room temperature show that it emits a bright‐blue fluorescence.     

Poly­[[di­aqua­cobalt(II)]‐μ‐4,4′‐bi­pyridine‐κ2N:N′‐μ‐p‐phenyl­enebis­(oxy­acetato)‐κ2O:O′]

The title compound, [Co^II(C₁₀H₈O₆)(C₁₀H₈N₂)(H₂O)₂]_n, was obtained by the hydro­thermal reaction of CoSO₄ with benzene‐1,4‐dioxy­di­acetate [systematic name: p‐phenyl­ene­bis­(oxy­acetate)] and 4,4′‐bi­pyridine (4,4′‐bpy). The Co atom lies at an inversion center and the benzene‐1,4‐dioxydiacetate and 4,4′‐bipyridine moieties lie about other inversion centers. The benzene‐1,4‐dioxydiacetate ligands bridge the octahedral Co^II coordination centers, forming a one‐dimensional zigzag chain. The chains are further bridged by 4,4′‐bpy ligands, forming a novel two‐dimensional supramolecular architecture. Hydro­gen‐bonding interactions between the coordinated water mol­ecules and the carboxyl­ate O atoms lead to the formation of a three‐dimensional network structure.     

A twofold interwoven two‐dimensional→two‐dimensional (2‐D→2‐D) cluster–organic network based on the [Cu2I2] cluster and the 4,4′‐(diazenediyl)dipyridine ligand: poly[[μ2‐4,4′‐(diazenediyl)dipyridine]‐μ2‐iodido‐copper(I)]

In the polymeric title compound, [CuI(C₁₀H₈N₄)]_n, the Cu^I atom is in a four‐coordinated tetrahedral geometry, formed by two I atoms and two pyridine N atoms from two different 4,4′‐(diazenediyl)dipyridine (4,4′‐azpy) ligands. Two μ₂‐I atoms link two Cu^I atoms to form a planar rhomboid [Cu₂I₂] cluster located on an inversion centre, where the distance between two Cu^I atoms is 2.7781 (15) Å and the Cu—I bond lengths are 2.6290 (13) and 2.7495 (15) Å. The bridging 4,4′‐azpy ligands connect the [Cu₂I₂] clusters into a two‐dimensional (2‐D) double‐layered grid‐like network [parallel to the (10) plane], with a (4,4)‐connected topology. Two 2‐D grid‐like networks interweave each other by long 4,4′‐azpy bridging ligands to form a dense 2‐D double‐layered network. To the best of our knowledge, this interwoven 2‐D→2‐D network is observed for the first time in [Cu₂I₂]–organic compounds.     

Poly[diaqua(μ‐4,4′‐bipyridine‐κ2N:N′)bis(μ‐cyanido‐κ2C:N)bis(cyanido‐κC)nickel(II)copper(II)]: a metal–organic cyanide‐bridged framework

The structure of the title compound, [NiCu(CN)₄(C₁₀H₈N₂)(H₂O)₂]_n or [{Cu(H₂O)₂}(μ‐C₁₀H₈N₂)(μ‐CN)₂{Ni(CN)₂}]_n, was shown to be a metal–organic cyanide‐bridged framework, composed essentially of –Cu–4,4′‐bpy–Cu–4,4′‐bpy–Cu– chains (4,4′‐bpy is 4,4′‐bipyridine) linked by [Ni(CN)₄]²⁻ anions. Both metal atoms sit on special positions; the Cu^II atom occupies an inversion center, while the Ni^II atom of the cyanometallate sits on a twofold axis. The 4,4′‐bpy ligand is also situated about a center of symmetry, located at the center of the bridging C—C bond. The scientific impact of this structure lies in the unique manner in which the framework is built up. The arrangement of the –Cu–4,4′‐bpy–Cu–4,4′‐bpy–Cu– chains, which are mutually perpendicular and non‐intersecting, creates large channels running parallel to the c axis. Within these channels, the [Ni(CN)₄]²⁻ anions coordinate to successive Cu^II atoms, forming zigzag –Cu—N[triple‐bond]C—Ni—C[triple‐bond]N—Cu– chains. In this manner, a three‐dimensional framework structure is constructed. To the authors' knowledge, this arrangement has not been observed in any of the many copper(II)–4,4′‐bipyridine framework complexes synthesized to date. The coordination environment of the Cu^II atom is completed by two water molecules. The framework is further strengthened by O—H...N hydrogen bonds involving the water molecules and the symmetry‐equivalent nonbridging cyanide N atoms.     

A three‐dimensional supramolecular framework of silver(I), 2‐phenylquinoline‐4‐carboxylate and 4,4′‐bipyridine

A novel supramolecular framework, catena‐poly[[[aqua(2‐phenylquinoline‐4‐carboxylato‐κO)silver(I)]‐μ‐4,4′‐bipyridine‐κ²N:N′] dihydrate], {[Ag(C₁₆H₁₀NO₂)(C₁₀H₈N₂)(H₂O)]·2H₂O}_n, has been synthesized and structurally characterized. The Ag^I centres are four‐coordinated and bridged by 4,4′‐bipyridine (4,4′‐bipy) ligands to form a one‐dimensional Ag–bipy chain. The Ag–bipy chains are further linked together by intermolecular O—H...O and O—H...N hydrogen‐bonding interactions between adjacent chains, resulting in a three‐dimensional framework.     

A novel one‐dimensional zinc coordination polymer containing 4‐methylbenzoate and 4,4‐bipyridine

The title compound, catena‐poly[[tris(μ‐4‐methylbenzoato)‐κ²O:O;κ⁴O:O′‐(4‐methylbenzoato‐κ²O,O′)dizinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn₂(C₈H₇O₂)₄(C₁₀H₈N₂)]_n, is a novel coordination polymer. The asymmetric unit contains two unique Zn^II ions, four 4‐methylbenzoate ligands and one 4,4′‐bipyridine (4,4′‐bpy) ligand, all in general positions. The four 4‐methylbenzoate ligands link the two Zn^II centres to form a dinuclear unit, with a Zn...Zn separation of 3.188 (2) Å, which can be regarded as a supramolecular secondary building unit (SBU). These SBUs are further bridged by 4,4′‐bpy ligands, forming a novel one‐dimensional infinite chain. There are π–π stacking interactions between the benzene rings of the 4‐methylbenzoate ligands and the pyridyl rings of the 4,4′‐bpy ligands, leading to the formation of a corrugated layer. These layers are further assembled via C—H...O hydrogen bonds into a three‐dimensional supramolecular network structure. Coordination polymers such as the title compound are of interest for their potential applications as functional materials.     

A two‐dimensional copper(II) coordination polymer based on 2,4′‐oxybis(benzoate) and 4,4′‐bipyridine

The reaction of Cu(NO₃)₂·3H₂O with 2,4′‐oxybis(benzoic acid) and 4,4′‐bipyridine under hydrothermal conditions produced a new mixed‐ligand two‐dimensional copper(II) coordination polymer, namely poly[[(μ‐4,4′‐bipyridine‐κ²N ,N ′)[μ‐2,4′‐oxybis(benzoato)‐κ⁴O ²,O ^2′:O ⁴,O ^4′]copper(II)] monohydrate], {[Cu(C₁₄H₈O₅)(C₁₀H₈N₂)]·H₂O}_n , which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction. The X‐ray diffraction crystal structure analysis reveals that the Cu^II ions are connected to form a two‐dimensional wave‐like network through 4,4′‐bipyridine and 2,4′‐oxybis(benzoate) ligands. The two‐dimensional layers are expanded into a three‐dimensional supramolecular structure through intermolecular O—H…O and C—H…O hydrogen bonds. Furthermore, magnetic susceptibility measurements indicate that the complex shows weak antiferromagnetic interactions between adjacent Cu^II ions.     

Poly[[diaqua‐μ‐4,4′‐bipyridine‐dinitratodi‐μ‐l‐tyrosinato‐dicopper(II)]: a chiral two‐dimensional coordination polymer

The title compound, [Cu₂(C₉H₁₀NO₃)₂(NO₃)₂(C₁₀H₈N₂)(H₂O)₂]_n, contains Cu^II atoms and l ‐tyrosinate (l ‐tyr) and 4,4′‐bipyridine (4,4′‐bipy) ligands in a 2:2:1 ratio. Each Cu atom is coordinated by one amino N atom and two carboxylate O atoms from two l ‐tyr ligands, one N atom from a 4,4′‐bipy ligand, a monodentate nitrate ion and a water molecule in an elongated octahedral geometry. Adjacent Cu atoms are bridged by the bidentate carboxylate groups into a chain. These chains are further linked by the bridging 4,4′‐bipy ligands, forming an undulated chiral two‐dimensional sheet. O—H...O and N—H...O hydrogen bonds connect the sheets in the [100] direction. This study offers useful information for the engineering of chiral coordination polymers with amino acids and 4,4′‐bipy ligands by considering the ratios of the metal ion and organic components.     

A threefold interpenetrated two‐dimensional zinc(II) supramolecular architecture based on 3‐nitrobenzoic acid and 4,4′‐bipyridine

With regard to crystal engineering, building block or modular assembly methodologies have shown great success in the design and construction of metal–organic coordination polymers. The critical factor for the construction of coordination polymers is the rational choice of the organic building blocks and the metal centre. The reaction of Zn(OAc)₂·2H₂O (OAc is acetate) with 3‐nitrobenzoic acid (HNBA) and 4,4′‐bipyridine (4,4′‐bipy) under hydrothermal conditions produced a two‐dimensional zinc(II) supramolecular architecture, catena‐poly[[bis(3‐nitrobenzoato‐κ²O,O′)zinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn(C₇H₄NO₄)₂(C₁₀H₈N₂)]_n or [Zn(NBA)₂(4,4′‐bipy)]_n, which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction analysis. The Zn^II ions are connected by the 4,4′‐bipy ligands to form a one‐dimensional zigzag chain and the chains are decorated with anionic NBA ligands which interact further through aromatic π–π stacking interactions, expanding the structure into a threefold interpenetrated two‐dimensional supramolecular architecture. The solid‐state fluorescence analysis indicates a slight blue shift compared with pure 4,4′‐bipyridine and HNBA.     

A new three‐dimensional cobalt(II) coordination polymer based on V‐shaped 3,4′‐oxydibenzoate: synthesis,crystal structure and magnetic properties

A new coordination polymer (CP), namely poly[(μ‐4,4′‐bipyridine)(μ₃‐3,4′‐oxydibenzoato)cobalt(II)], [Co(C₁₄H₈O₅)(C₁₀H₈N₂)]_n or [Co(3,4′‐obb)(4,4′‐bipy)]_n ( 1 ), was prepared by the self‐assembly of Co(NO₃)₂·6H₂O with the rarely used 3,4′‐oxydibenzoic acid (3,4′‐obbH₂) ligand and 4,4′‐bipyridine (4,4′‐bipy) under solvothermal conditions, and has been structurally characterized by elemental analysis, IR spectroscopy, single‐crystal X‐ray crystallography and powder X‐ray diffraction (PXRD). Single‐crystal X‐ray diffraction reveals that each Co^II ion is six‐coordinated by four O atoms from three 3,4′‐obb^2? ligands, of which two function as monodentate ligands and the other as a bidentate ligand, and by two N atoms from bridging 4,4′‐bipy ligands, thereby forming a distorted octahedral CoN₂O₄ coordination geometry. Adjacent crystallographically equivalent Co^II ions are bridged by the O atoms of 3,4′‐obb^2? ligands, affording an eight‐membered Co₂O₄C₂ ring which is further extended into a two‐dimensional [Co(3,4′‐obb)]_n sheet along the ab plane via 3,4′‐obb^2? functioning as a bidentate bridging ligand. The planes are interlinked into a three‐dimensional [Co(3,4′‐obb)(4,4′‐bipy)]_n network by 4,4′‐bipy ligands acting as pillars along the c axis. Magnetic investigations on CP 1 disclose an antiferromagnetic coupling within the dimeric Co₂ unit and a metamagnetic behaviour at low temperature resulting from intermolecular π–π interactions between the parallel 4,4′‐bipy ligands.     

Poly[diaquabis(μ‐4,4′‐bipyridine‐κ2N:N′)bis(ethane‐1,2‐diol)di‐μ‐sulfato‐dicopper(II)]

The title compound, [Cu₂(SO₄)₂(C₁₀H₈N₂)₂(C₂H₆O₂)₂(H₂O)₂]_n, contains two crystallographically unique Cu^II centres, each lying on a twofold axis and having a slightly distorted octahedral environment. One Cu^II centre is coordinated by two bridging 4,4′‐bipyridine (4,4′‐bipy) ligands, two sulfate anions and two aqua ligands. The second is surrounded by two 4,4′‐bipy N atoms and four O atoms, two from bridging sulfate anions and two from ethane‐1,2‐diol ligands. The sulfate anion bridges adjacent Cu^II centres, leading to the formation of linear ...Cu1–Cu2–Cu1–Cu2... chains. Adjacent chains are further bridged by 4,4′‐bipy ligands, which are also located on the twofold axis, resulting in a two‐dimensional layered polymer. In the crystal structure, extensive O—H...O hydrogen‐bonding interactions between water molecules, ethane‐1,2‐diol molecules and sulfate anions lead to the formation of a three‐dimensional supramolecular network structure.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Magnesium iodide–4,4′‐bipyridine–water (1/3/4) and strontium iodide–4,4′‐bipyridine–propan‐1‐ol (1/2.5/2)

Both of the title compounds, catena‐poly­[[[tetra­aqua­magnesium(I)]‐μ‐4,4′‐bi­pyridine‐κ²N:N′] diiodide bis(4,4′‐bi­pyridine) solvate], {[Mg(C₁₀H₈N₂)(H₂O)₄]I₂·2C₁₀H₈N₂}_n, (I), and catena‐poly­[[[μ‐4,4′‐bi­pyridine‐bis­[di­iodo­bis­(propan‐1‐ol)­strontium(I)]]‐di‐μ‐4,4′‐bi­pyridine‐κ⁴N:N′] bis(4,4′‐bi­pyri­dine) solvate], {[Sr₂I₄(C₁₀H₈N₂)₃(C₃H₈O)₄]·2C₁₀H₈N₂}_n, (II), are one‐dimensional polymers which are single‐ and double‐stranded, respectively, the metal atoms being linked by the 4,4′‐bi­pyridine moieties. The Mg complex, (I), is [cis‐{(H₂O)₄Mg(N‐4,4′‐bi­pyridine‐N′)_(2/2)}]_(∞|∞)I₂·4,4′‐bi­pyridine and Mg has a six‐coordinate quasi‐octahedral coordination environment. The Sr complex, (II), is isomorphous with its previously defined Ba counterpart [Kepert, Waters & White (1996). Aust. J. Chem. 49 , 117–135], being [(propan‐1‐ol)₂I₂Sr(N‐4,4′‐bi­pyridine‐N′)_(3/2)]_(∞|∞)·4,4′‐bi­pyridine, with the I atoms trans‐axial in a seven‐coordinate pentagonal–bipyramidal Sr environment.     

Cobalt(II) chloride complexes with 1,1′‐dimethyl‐4,4′‐bipyrazole featuring first‐ and second‐sphere coordination of the ligand

In catena‐poly[[dichloridocobalt(II)]‐μ‐(1,1′‐dimethyl‐4,4′‐bipyrazole‐κ²N²:N^2′)], [CoCl₂(C₈H₁₀N₄)]_n, (1), two independent bipyrazole ligands (Me₂bpz) are situated across centres of inversion and in tetraaquabis(1,1′‐dimethyl‐4,4′‐bipyrazole‐κN²)cobalt(II) dichloride–1,1′‐dimethyl‐4,4′‐bipyrazole–water (1/2/2), [Co(C₈H₁₀N₄)₂(H₂O)₄]Cl₂·2C₈H₁₀N₄·2H₂O, (2), the Co²⁺ cation lies on an inversion centre and two noncoordinated Me₂bpz molecules are also situated across centres of inversion. The compounds are the first complexes involving N,N′‐disubstituted 4,4′‐bipyrazole tectons. They reveal a relatively poor coordination ability of the ligand, resulting in a Co–pyrazole coordination ratio of only 1:2. Compound (1) adopts a zigzag chain structure with bitopic Me₂bpz links between tetrahedral Co^II ions. Interchain interactions occur by means of very weak C—H...Cl hydrogen bonding. Complex (2) comprises discrete octahedral trans‐[Co(Me₂bpz)₂(H₂O)₄]²⁺ cations formed by monodentate Me₂bpz ligands. Two equivalents of additional noncoordinated Me₂bpz tectons are important as `second‐sphere ligands' connecting the cations by means of relatively strong O—H...N hydrogen bonding with generation of doubly interpenetrated pcu (α‐Po) frameworks. Noncoordinated chloride anions and solvent water molecules afford hydrogen‐bonded [(Cl⁻)₂(H₂O)₂] rhombs, which establish topological links between the above frameworks, producing a rare eight‐coordinated uninodal net of {4²⁴.5.6³} ( ilc ) topology.     

A three‐dimensional cadmium(II) coordination polymer: poly[[[μ‐4,4′‐(propane‐1,3‐diyl)dipyridine‐κ2N:N](μ‐3,3′‐thiodipropionato‐κ3O,O′:O)cadmium(II)] monohydrate]

In the title coordination polymer, {[Cd(C₆H₈O₄S)(C₁₃H₁₄N₂)]·H₂O}_n, the Cd^II atom displays a distorted octahedral coordination, formed by three carboxylate O atoms and one S atom from three different 3,3′‐thiodipropionate ligands, and two N atoms from two different 4,4′‐(propane‐1,3‐diyl)dipyridine ligands. The Cd^II centres are bridged through carboxylate O atoms of 3,3′‐thiodipropionate ligands and through N atoms of 4,4′‐(propane‐1,3‐diyl)dipyridine ligands to form two different one‐dimensional chains, which intersect to form a two‐dimensional layer. These two‐dimensional layers are linked by S atoms of 3,3′‐thiodipropionate ligands from adjacent layers to form a three‐dimensional network.     

Dichloro­(4,4′‐dialkyl‐2,2′‐bipyridine‐κ2N,N′)platinum(II), where alkyl is pentyl and heptyl

Dichloro­(4,4′‐dipentyl‐2,2′‐bipyridine‐κ²N,N′)platinum(II), [PtCl₂(C₂₀H₂₈N₂)], adopts a discrete π–π stacking structure, where the alkyl chains are located in a random manner. In contrast, dichloro­(4,4′‐diheptyl‐2,2′‐bipyridine‐κ²N,N′)platinum(II), [PtCl₂(C₂₄H₃₆N₂)], forms a layer structure comprised of alkyl chain layers and paired coordination sites, as observed for analogous complexes with longer alkyl chains.     

New organic–inorganic frameworks incorporating iso‐ and heteropolymolybdate units and a 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium multiple hydrogen‐bond donor

Poly[bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) γ‐octamolybdate(VI) dihydrate], {(C₁₀H₁₆N₄)₂[Mo₈O₂₆]·2H₂O}_n, (I), and bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) α‐dodecamolybdo(VI)silicate tetrahydrate, (C₁₀H₁₆N₄)₂[SiMo₁₂O₄₀]·4H₂O, (II), display intense hydrogen bonding between the cationic pyrazolium species and the metal oxide anions. In (I), the asymmetric unit contains half a centrosymmetric γ‐type [Mo₈O₂₆]⁴⁻ anion, which produces a one‐dimensional polymeric chain by corner‐sharing, one cation and one water molecule. Three‐centre bonding with 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium, denoted [H₂Me₄bpz]²⁺ [N...O = 2.770 (4)–3.146 (4) Å], generates two‐dimensional layers that are further linked by hydrogen bonds involving water molecules [O...O = 2.902 (4) and 3.010 (4) Å]. In (II), each of the four independent [H₂Me₄bpz]²⁺ cations lies across a twofold axis. They link layers of [SiMo₁₂O₄₀]⁴⁻ anions into a three‐dimensional framework, and the preferred sites for pyrazolium/anion hydrogen bonding are the terminal oxide atoms [N...O = 2.866 (6)–2.999 (6) Å], while anion/aqua interactions occur preferentially viaμ₂‐O sites [O...O = 2.910 (6)–3.151 (6) Å].