Reactivity of the Ge–H,Sn–H,P–H,and Se–H Bonds in Radical Abstraction Reactions

The experimental data for the liquid- and gas-phase reactions of atoms and radicals with organoelement compounds R _{n – 1}E–H

FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H

The study explored the compatibility between the main product of Portland cement hydration and the main product of the alkali activation of fly ash: C–S–H and N–A–S–H gels, respectively. Both gels were synthesized with laboratory reagents at different pH values. Blends of the two were synthesized as well, using the sol–gel procedure. All the gels were characterized with Fourier transform IR spectroscopy (FTIR). The gels synthesized with this procedure were shown to precipitate together with a silica-rich gel. In addition, the pH level was found to play a determinant role in both C–S–H and N–A–S–H gel synthesis. The C–S–H gel is the major phase formed at pH > 11 and N–A–S–H gel for pH > 12. The results relating to the joint synthesis of the two (C–S–H and N–A–S–H) gels were not conclusive. Technique used for the characterization failed to differentiate between them in the blended material.

C–H...O and C–H...N interactions in RNA structures

Small molecule studies indicate that C–H...X interactions (X: O,N) constitute weak H-bonds. We have performed a comprehensive analysis of their occurrence and geometry in RNA structures. Here, we report on statistical properties of the total set of interactions identified and discuss selected motifs. The distance/angle distribution of all interactions exhibits an excluded region where the allowed C–H...X angle range increases with an increasing H...X distance. The preferred short C–H...X interactions in RNA are backbone-backbone contacts between neighbour nucleotides. Distance/angle distributions generated for various interaction types can be used for error recognition and modelling. The axial C2′(H)...O4′ and C5′(H)...O2′ interactions connect two backbone segments and form a seven-membered ring that is specific for RNA. An AA base pair with one standard H-bond and one C–H...N interaction has been identified in various structures. Despite the occurrence of short C–H...X contacts their free energy contribution to RNA stability remains to be assessed. Received: 17 May 1998 / Accepted: 4 August 1998 / Published online: 2 November 1998     

Interaction parameters and (solid + liquid) equilibria calculation for KCl–H2O–HCl–C2H5OH,K2SO4–H2O–H2SO4 and K2SO4–H2O–C2H5OH mixed solvent-electrolyte systems

This work deals with the prediction and experimental measurements of the (solid + liquid) equilibrium (SLE) in acid medium for industrial purposes. Specific systems including KCl–ethanol–water–HCl and K₂SO₄–water–H₂SO₄ were analyzed. At first, a critical discussion of SLE calculations was given, based on the well-known UNIQUAC extended and LIQUAC models. Two new proposals were derived, considering the explicit necessity of a new reference state for SLE calculations for the studied (solvents + acid) mixtures. The solubility of KCl in water–ethanol–HCl mixed solvents was measured in the temperature range of 300.15 to 315.15 K using an analytical gravimetric method. These results combined with some other experimental data reported in the open literature let us to propose a set of parameters for the new models. They included the interaction parameters between ethanol and the H⁺ ion. The prediction capability of the new models, for calculations in acid medium, was illustrated. Experimentally, it was observed that the (K₂SO₄ + water + H₂SO₄) system presented the unusual behavior of increasing K₂SO₄ solubility with an increase in the sulfuric acid concentration. This was accurately predicted by the newly proposed models.     

Liquid–liquid equilibria in the system H3PO4–KCl–H2O–tri-n-butyl phosphate: experiments and modelling

The liquid–liquid equilibria of the system H₃PO₄–KCl–H₂O–TBP was studied experimentally in the concentration range 0–6 mol/kg. The obtained data were modelled using the Pitzer equation for the aqueous phase and the Sergievskii–Dannus relationship for the organic phase. A fairly good agreement was observed between the model and the experimental data.     

Carbon–hydrogen (C–H) bond activation at PdIV: a Frontier in C–H functionalization catalysis

The direct functionalization of carbon–hydrogen (C–H) bonds has emerged as a versatile strategy for the synthesis and derivatization of organic molecules. Among the methods for C–H bond activation, catalytic processes that utilize a Pd^II/Pd^IV redox cycle are increasingly common. The C–H activation step in most of these catalytic cycles is thought to occur at a Pd^II centre. However, a number of recent reports have suggested the feasibility of C–H cleavage occurring at Pd^IV complexes. Importantly, these latter processes often result in complementary reactivity and selectivity relative to analogous transformations at Pd^II. This mini review highlights proposed examples of C–H activation at Pd^IV centres. Applications of this transformation in catalysis as well as mechanistic details obtained from stoichiometric model studies are discussed. Furthermore, challenges and future perspectives for the field are reviewed.     

Critical temperatures,pressures, and densities for the mixtures CO2–C3H8, CO2–nC4H10, C2H6–C3H8, and C3H8–nC4H10

A simple method is developed to estimate mixture critical temperatures (T_c), pressures (P_c), and densities (ρ_c) as a function of overall composition (X) from near critical region experimental coexistence data. This three-step method is applied to four mixtures, CO₂–C₃H₈, CO₂–nC₄H₁₀, C₂H₆–C₃H₈, and C₃H₈–nC₄H₁₀. Isothermal liquid–vapor coexistence data, which includes temperature, vapor pressure, coexisting densities (ρ^ℓ and ρ^v), and coexisting compositions for the more volatile component (x₁^v and x₁^ℓ) are used. In the first step, the difference of the saturated liquid and vapor densities (ρ^ℓ−ρ^v) is fitted to an empirical function in ((P_c−P)/P_c) to obtain P_c. Then P/P_c and ((ρ^ℓ+ρ^v)/2ρ_c) are simultaneously fitted to functions of a polynomial in (X₁−(x₁^v+x₁^ℓ)/2) yielding estimates of ρ_c and X₁. Finally, the discrete estimated critical data points are fitted with an equation to provide a continuous representation of the critical lines. The method is successfully tested for the mixtures, CO₂–C₃H₈ and CO₂–nC₄H₁₀, for which there is a reasonable amount of isothermal data. The procedure is then applied to the mixtures, C₂H₆–C₃H₈ and C₃H₈–nC₄H₁₀, for which there are sparse data. For all four mixtures, the critical temperature line, T_c vs. X₁, matches literature values within ±0.5%. The critical pressure line, P_c vs. X₁, and critical density line, ρ_c vs. X₁, match literature values, in general, within ±2%.     

Phase Diagrams of Fullerenol-d–LaCl3–H2O and Fullerenol-d–GdCl3–H2O Systems at 25°С

Russian Journal of Physical Chemistry A - Isothermal phase diagrams of ternary systems fullerenol-d–LaCl3–H2O and fullerenol-d–GdCl3–H2O at 25°C are studied via...     

Hydrocarbons as proton donors in C–H⋯N and C–H⋯S hydrogen bonds

C–H?N and C–H?S hydrogen bonds were analyzed in complexes where acetylene, ethylene, methane and their derivatives are proton donors while ammonia and hydrogen sulfide are proton acceptors. Ab initio calculations were performed to analyze those interactions; MP2 method was applied and the following basis sets were used: 6-311++G(d,p), aug-cc-pVDZ and aug-cc-pVTZ. The results showed that hydrogen bonds for complexes with ammonia are systematically stronger than such interactions in complexes with hydrogen sulfide. If the fluorine substituted hydrocarbons are considered then F-substituents enhance the strength of hydrogen bonding. For a few complexes, mainly those where carbon atom in proton donating C–H bond possesses sp³ hybridization, the blue-shifting hydrogen bonds were detected. Additionally, Quantum Theory of ‘Atoms in Molecules’ and Natural Bond Orbitals method were applied to analyze H-bond interactions.     

Gas hydrate formation in the system C2H6–H2–H2O at pressures up to 250 MPa

Decomposition curves of gas hydrates formed in the ethane–hydrogen–water system were studied in the pressure interval 2–250 MPa. Gas hydrates synthesized at low (up to 5 MPa) pressures were also studied with use of X-ray powder diffraction and Raman spectroscopy. It was shown that ethane–hydrogen mixtures with hydrogen contents 0–30 mol.% form cubic structure I gas hydrates. Higher hydrogen concentration most probably results in appearance of another hydrate phase. We speculate that the gas mixtures with the hydrogen content above 60 mol.% form cubic structure II double hydrate of hydrogen and ethane at temperatures below ≈280 K and pressures above 25 MPa.     

Iodination of B12H11OC(O)CH2–3, B12H11OH2–, and B12H11SCN2–

Reactions of iodination of monosubstituted derivatives of B₁₂H₁₁X^2–anion (X = OC(O)CH₃, OH, SCN) were studied. The reactions were shown to proceed smoothly to give B₁₂H₁₀(OC(O)CH₃)I^2–((carboxy)(iodo)[decahydro[I _h1551-²⁰-closo]dodecaborate(2–)] anion), B₁₂H₁₀(OH)I^2–((hydroxo)(iodo)[decahydro[I _h1551-²⁰-closo]dodecaborate(2–)] anion), and B₁₂H₁₀(SCN)I^2–((thiocyanato)(iodo)[decahydro[I _h1551-²⁰-closo]dodecaborate(2–)] anion) in high yields, irrespective of the solvent used (benzene, H₂O–ROH, where R = C₂H₅, CH₂CH₂CH₃).¹     

Features of strong O–H⋯O and N–H⋯O hydrogen bond manifestation in vibrational spectra

The work deals with the establishment of the dependence of the vibrational frequencies of strong O–H?O and N–H?O hydrogen bonds for the diagnosing the bonds themselves. To this end, the Raman spectra of a large number of different normal and deutero-substituted crystals characterized by the presence of strong O–H?O and N–H?O bonds are measured and the quantum chemical calculation is performed for one of these compounds. The dependence of the O–H stretching frequency on the O?O distance is constructed differing from that previously known for short O?O contacts. The mechanisms of significant broadening of the O–H vibration band in strong O–H?O hydrogen bonds are considered. Different dependences of the N–H vibrational frequencies in N–H?O bonds are reported and the causes of this diversity are discussed.     

Copper and zinc co-catalyzed synthesis of imidazoles via the activation of sp C–H and N–H bonds

An efficient and facile approach to synthesize imidazoles from amidines and arylketone via oxidative coupling of sp³ C–H bond and N–H bond is reported. This strategy exhibits high performance in terms of regioselectivity with moderate to high yields by using easily available materials, and provides an alternative method to synthesize multi-substituted imidazole skeletons.     

Activation of C–H and H–H bonds by dinuclear iridium complexes. Oxidative addition to highly active unsaturated 32e− diiridium species

Reactions of [(Cp¹Ir)₂(μ-dmpm)(μ-H)₂][OTf]₂ (1) with NaO^tBu in aromatic solvent at room temperature give [(Cp¹Ir)(H)(μ-dmpm)(μ-H)(Cp¹Ir)(Ar)][OTf] [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furyl (5a), 3-furyl (5b)] via intermolecular aromatic C–H activation. Treatment of [(Cp¹Ir)₂(μ-dppm)(μ-H)₂][OTf]₂ (2) with weak base (Et₂NH) results in intramolecular C–H activation of a phenyl group in the dppm ligand to give [(Cp¹Ir)(H){μ-PPh(C₆H₄)CH₂PPh₂}(μ-H)(Cp¹Ir)][OTf] (6). Reaction of 1 with NaO^tBu in tetrahydrofuran under H₂ (1 atm) results in activation of the H–H bond to give [{(Cp¹Ir)(H)}₂(μ-dmpm)(μ-H)][OTf] (7). Reaction of 1 with NaO^tBu in dichloromethane under carbon monoxide (1 atm) gives a carbonyl-bridged Ir^II–Ir^II complex, [(Cp¹Ir)₂(μ-dmpm)(μ-H)(μ-CO)][OTf] (8-OTf). These results strongly suggest that the active species in C–H and H–H bond activation starting with 1 and 2 would be unsaturated 32e^? diiridium species. The structures of 3, 5a, 6, 7, and 8-BPh₄ have been determined by X-ray diffraction methods.     

Transition-metal-catalyzed ketone-directed ortho-C–H functionalization reactions

In the past 20 years, organic chemists have made significant contributions to the development of transition-metal-catalyzed ketone-directed ortho-C–H functionalization. These include Ru, Rh, Pd, and Ir-catalyzed ketone-directed C–C and C-heteroatom (O, N, Cl, Br, I) bond forming reactions. This article summarizes the developments of Ru, Rh, Pd, and Ir-catalyzed ketone-directed ortho-C–H functionalization reactions in the past two decades.     

Compounds of Undecahydrodecaborate Anion B10H11–

Conditions for the synthesis of salts of the B₁₀H₁₁ ^–anion with different cations in the Cat₂B₁₀H₁₀+ RCOOH (R = H, CF₃; Cat = Me₄N⁺, Et₄N⁺, Bu₄N⁺, Ph₄P⁺, Ph₄As⁺) systems were studied depending on the acid strength (pK _a) and size of the cation. It was established that reactions with trifluoroacetic acid give compounds of this anion with any one of the quaternary ammonium, phosphonium, or arsonium cations, while formic acid can only give salts with the largest of these cations.     

The B–H–B bridging interaction in B-substituted oxazaborolidine–borane complexes: a theoretical study

Ten oxazaborolidine–borane complexes, nine among them boron-substituted (B–R, R=CH₃, CF₃, and OCH₃), are carefully analysed using quantum-chemistry methods to determine their equilibrium geometries and the corresponding oxazaborolidine–borane interaction energies. It is observed that in all B-trifluoromethyl substituted oxazaborolidine–borane complexes and in one B-methyl substituted complex the B–H–B bond is formed and the interaction energies are 1.5–2.5 times as large as in other investigated complexes. We believe that the presented results may be helpful in experimental recognition of oxazaborolidine–borane complexes which may appear, inter alia, as reaction intermediates.     

Recent advances in mechanochemical C–H functionalization reactions

The mechanochemical synthesis has provided a greener alternative to solution-based approaches by eliminating the use of organic solvents and reducing the energy consumption. The C–H functionalization is among the most concise and economical synthetic strategies. The combination of the benefits from these two methods provides new opportunities to further increase the efficiency and sustainability of organic synthesis. In this digest, we aim to provide a brief overview of the recent advances in mechanochemical C–H functionalization reactions.     

Using LR-HSQMBC to observe long-range H–N correlations

The recently reported LR-HSQMBC experiment has been optimized for ¹H–¹⁵N long-range heteronuclear couplings. Several previously unreported four-bond correlations, consistent with the predicted by DFT calculations (0.2–0.3 Hz ⁴J_NH couplings), have been observed for strychnine using 2 Hz optimization of the LR-HSQMBC experiment. This experiment offers an advantage over accordion-optimized experiments such as IMPEACH and CIGAR for the observation of long-range ¹H–¹⁵N correlations in that the experiment is refocused and employs a CLIP pulse sequence element to bring the long-range correlations into phase, allowing broadband X-decoupling to be employed during acquisition.