首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
立方介孔相含钇氧化硅的合成与表征   总被引:4,自引:0,他引:4  
以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。  相似文献   

2.
高强  王滨  季东  丁勇  索继栓 《分子催化》2006,20(1):7-10
在强酸性条件下以十六烷基三甲基溴化铵为模板剂,TEOS为硅源,沿S X-I 途径合成了Zr含量为0.85~2.42%的介孔分子筛Zr-SBA-1.采用XRD、SEM、BET、DR UV-V is等技术对所合成的Zr-SBA-1的表征结果表明,所合成的Zr-SBA-1分子筛具有典型的立方相介孔结构SBA-1分子筛的特征,锆物种被成功引入分子筛骨架中.  相似文献   

3.
六方 MCM- 41和立方 MCM- 48介孔分子筛是长程有序的介孔材料 ,由于其孔壁是无定形结构 ,具有较弱的酸性 ,限制了其应用范围 .若能提高它们的酸强度则可提高其在石油炼制和精细化工中的应用价值 .现已采用多种改进方法来提高其酸强度 [1~ 6 ] ,但所合成的介孔材料均为六方结构 ,而具有立方结构的材料未见文献报道 .本文采用两步晶化合成法 ,用低浓度的表面活性剂合成出具有强酸位的立方介孔分子筛 ( MB48) ,还通过调节溶液的酸碱性合成出六方介孔分子筛 ( MB41 ) ,对样品的结构、酸性和催化性能进行了表征和比较 .1 实验部分1 .1  β…  相似文献   

4.
基于长链离子液体模板合成Fe(Co、Ni)-MCM-48   总被引:1,自引:0,他引:1       下载免费PDF全文
以两亲长链离子液体(氯化-1-十六烷基-3-甲基咪唑)为模板剂,采用水热合成方法,分别合成了含铁、钴和镍的立方介孔分子筛MCM-48。通过XRD、TEM、ICP-AES、FTIR、UV-Vis和N2吸附/脱附实验对其结构和形态进行了表征,并考察了钴掺杂量和模板剂用量对合成立方相结构的影响。结果表明,用该方法合成的试样具有较高的比表面积和规则的立方介孔孔道结构等特征;相对于铁和镍的掺杂试样,钴物种能以四面体的结构稳定地存在于立方介孔分子筛骨架中。  相似文献   

5.
三头季铵盐表面活性剂导向合成新型立方相介孔二氧化硅   总被引:7,自引:0,他引:7  
介孔分子筛因具有大而均一的孔道、高比表面积及相对良好的热稳定性而在精细化学品催化剂[1,2 ] 、生物大分子分离 [3] 和功能材料的主体 [4 ] 等领域有十分广阔的应用前景 .自 1 992年 Mobil公司合成 M41 S[5,6 ] 系列介孔材料以来 ,HMS[7] ,MSU[8] 和 SBA[9~ 12 ] 系列以及 FDU- 1 [13] 等不同结构的介孔分子筛材料相继被合成 .立方相介孔分子筛因具有三维网状结构和可通性较高的孔道而在反应中不易堵塞 ,相对于一维孔道结构的六角相 MCM- 41和 SBA- 1 5 ,其应用前途更加广阔 .迄今 ,人们已经合成了 MCM- 48[14~ 16 ]( Ia3d) …  相似文献   

6.
以十六烷基三甲基溴化铵为结构导向剂,通过水热法合成了具有立方结构的含钕Nd-MCM-48介孔分子筛材料。XRD和TEM测试表明当nNd/nSi<0.05时可以获得典型的长程有序介孔立方结构相,随nNd/nSi比的增加,晶胞参数的增大和红外吸收光谱(FT-IR)的变化为Nd进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出了其BET表面积为1 195 m2·g-1,BJH平均孔径为3.6 nm。紫外-可见漫反射光谱(UV-Vis)证明钕氧形成一种八面体结构。X射线光电子能谱(XPS)进一步证明钕主要以三价形式存在于立方介孔分子筛骨架中。  相似文献   

7.
Ti-Si介孔分子筛的转晶与控制   总被引:6,自引:0,他引:6  
以季铵盐型阳离子Gemini表面活性剂[C16H33(CH3)2N+(CH2)6N+(CH3)2C16H33]•2Br−(GEM16-6-16)为模板剂, 改变n(Ti)/n(Si)比值, 合成了系列Ti-Si介孔分子筛. X射线衍射(XRD)和透射电子显微镜(TEM)等表征结果表明, 在n(Ti)/n(Si)≤0.20时, 分子筛为高度有序六方介孔; 当 n(Ti)/n(Si)为 0.30时, 介孔转晶为立方相; 当n(Ti)/n(Si)为0.50时, 介孔转晶为层状相; n(Ti)/n(Si)为1.0时, 材料失去有序孔道结构. FT-IR分析表明, 在分子筛骨架间形成了Ti—O—Si键, 而且Ti—O—Si键的数目随n(Ti)/n(Si)的增加而增加, 达到一定饱和值后基本保持不变. 乙醇和丁醇对纯硅基介孔分子筛孔结构转晶控制作用呈现六方相→立方相→层状相递变规律, 因而钛酸正丁酯水解生成的丁醇对Ti-Si介孔分子筛转晶具有一定的控制作用.  相似文献   

8.
通过原位合成的方法,以[Zn(OH)x]-(x-2)(x>2)为锌源、正硅酸乙酯(TEOS)为硅源,合成了孔壁为ZnO/SiO2复合结构的MCM-48型有序介孔分子筛,并通过XRD、XPS、N2吸附-脱附等温线等手段对样品进行了表征,结果表明,锌以正二价离子的形式均匀的分布在MCM-48分子筛的孔壁结构中.另外,适量掺锌所合成的Zn-MCM-48介孔材料仍然保持立方介孔的有序结构,具有较高的比表面积、较高的孔容和较宽的孔径分布.  相似文献   

9.
杂化介孔分子筛HMS的合成与表征   总被引:1,自引:0,他引:1  
雒旭  吕高孟  钱广  齐彦兴 《分子催化》2006,20(6):491-495
以十六胺(HDA)为模板剂,通过正硅酸乙酯和硅烷偶联剂一步法合成了杂化介孔分子筛HMS,并通过XRD、N2吸脱附、FT-IR、TG、SEM等手段对其进行结构表征.结果表明合成的材料具有良好有序的介孔结构、大的孔径(≈2.04.0 nm)和比表面积(>600 m2g-1),接近球形颗粒,尺寸在0.51μm之间.  相似文献   

10.
混合表面活性剂模板法合成立方相介孔含钛氧化硅   总被引:12,自引:0,他引:12  
自1992年Mobil公司的M41S系列介孔氧化硅分子筛问世以来[1,2],借助表面活性剂液晶模板方法合成各种孔结构与不同大小孔径的硅基分子筛材料引起了人们的极大兴趣,目前多数工作仍然集中于六方相的介孔分子筛.具有双连续的三维交织立方排列孔道结构的MCM48由于其孔道不易堵塞和良好的骨架结构稳定性[3,4],在催化、吸附和与其为载体的制备等方面具有独特的应用价值.但由于液晶模板形成立方相区的范围非常狭窄,相应的分子堆积比对模板剂分子几何结构要求较苛刻,采用单一表面活性剂为模板剂合成时,条件难以掌握,制备MCM48十分困难.H…  相似文献   

11.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

12.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

13.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

14.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

15.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

16.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

17.
An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.  相似文献   

18.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

19.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号