LiCoO_2掺杂对锰酸锂结构和性能的影响

用固相反应合成了LiCoO2掺杂改性的LiMn2O4锂离子电池正极材料,优化了LiMn2O4的改性路径及制备条件.利用SEM、XRD对产物的结构进行了表征,并测试了产物的电化学性能.结果表明:所得产物均具有尖晶石型LiMn2O4结构.LiCoO2的掺入增加了尖晶石结构的稳定性,改善了尖晶石型LiMn2O4的充放电循环性能.     

锂离子电池LiMn2O4正极材料的高温改性

锂离子电池LiMn2O4正极材料的高温改性;锂离子电池;正极材料;尖晶石;LiMn2O4;包覆     

稀土元素掺杂对LiMn2O4正极材料改性的研究进展

尖晶石LiMn2O4作为高能锂离子二次电池的正极材料,其原料资源丰富、生产工艺简单、环境污染小、可回收利用,成为近年来人们研究的热点,被公认为最有潜力取代LiCoO2的正极材料之一.但是它的性能还不尽如人意,例如在循环及存放的过程中会出现容量衰减,高温情况下尤为严重.为了提高LiMn2O4正极材料的电化学性能,国内外研究者尝试了多种方法,例如元素掺杂、表面包覆、工艺改进等,其中掺杂金属元素已经被证明是最佳途径.结合作者所在实验室的工作,对稀土元素掺杂改变尖晶石LiMn2O4正极材料电化学性能的研究进行了综述.     

掺稀土的LiM0.02Mn1.98O4锂离子电池正极材料

自1991年Ohzuku[1] 、 Tarascon[2]等成功地将LiMn2O4用于锂离子电池正极以来, 人们对尖晶石LiMn2O4的电化学性质进行了广泛的研究[3]. 尖晶石LiMn2O4的一个缺点是充放电过程中, 特别在较高温度(如50 ℃)下, 其容量下降明显. Zhou等[4]详细研究了该过程, 发现造成容量下降的主要原因是充电状况下正极LiMn2O4的溶解, 由于Jahn-Taller效应生成不稳定的两相结构以及电解液的分解等. 为了提高LiMn2O4的充放电循环稳定性, 人们除了优化合成条件和溶液组分外, 主要采用添加少量掺杂元素(M), 部分替代LiMn2O4中的Mn, 制得LiMxMn2-xO4, 以抑制溶解和Jahn-Taller效应引起的结构变化.     

Al3+对尖晶石型LiMn2O4正极材料的表面掺杂包覆改性

采用表面掺杂包覆改性的方法对LiMn2O4尖晶石型锂离子电池正极材料进行改性.以Al为表面掺杂元素,Al(NO3)3为原料,研究了Al3+掺杂量为7.1%(原子分数)时不同温度(300、400、500、600、700、750、800℃)下的改性效果.研究发现,随着热处理温度的升高,改性样品的最大比容量先升高后降低,在700℃达到最大值;循环衰减先增大后降低再增大;这是由于随着热处理温度的升高,包覆层逐渐分解并与LiMn2O4颗粒反应固溶,在750℃完全固溶,衰减达到极小值,而后固溶层向颗粒内部扩散,导致包覆层对颗粒免受电解液溶解的保护能力变弱,因而容量衰减增大.其中700℃热处理5h的样品最大比容量为133.6mAh·g-1,循环50周衰减3.4%.研究表明Al3+表面掺杂包覆改性有利于促进LiMn2O4尖晶石型锂离子电池正极材料的商业化生产,具有大规模应用的前景.     

Al掺杂尖晶石LiMn2O4正极材料的性能

尖晶石LiMn2O4作为锂离子电池正极可大电流放电,且成本低、环境友好.采用溶胶-凝胶法制备尖晶石LiMn2O4及Al掺杂材料.使用X-射线衍射(XRD)和扫描电子显微镜(SEM)观察材料结构与形貌.结果表明,复合材料颗粒尺寸300-500 nm,呈类球形.电化学恒流充放电测试表明,Al掺杂尖晶石LiMn2O4电极的循环性明显提高,Al掺杂5%LiMn2O4(by mass,下同)正极在1C倍率充放电100周期循环后的容量保持率为98.2%,1C倍率充电、5C倍率放电下,100周期循环后其容量保持率为99.0%,表现出较优的电化学循环性能.     

柠檬酸溶解废锂离子电池正极材料的研究

探求废锂离子电池正极材料LiMn2O4在柠檬酸溶液中的溶解条件,为废旧电池的进一步回收利用奠定基础。采用单因素与正交实验相结合的方法,对废锂离子电池正极材料LiMn2O4在柠檬酸溶液中的溶解条件进行研究,结果表明,废锂离子电池正极材料LiMn2O4在柠檬酸溶液中适宜的溶解条件为:柠檬酸浓度1.0mol.L-1、溶解温度45℃、H2O2加入量5.0%、料液比60g.L-1,在此条件下正极材料LiMn2O4在柠檬酸溶液中的溶解率达到99.56%。对柠檬酸溶解废锂离子电池正极材料LiMn2O4的机理进行了探讨,认为在加入H2O2之前,尖晶石LiMn2O4中的Mn3+发生歧化反应生成Mn2+以及MnO2,而Mn4+在溶液中水解生成MnO2。MnO2与柠檬酸发生氧化还原反应生成丙酮二羧酸及Mn2+。加入H2O2之后,H2O2作为还原剂能够将剩余的MnO2全部还原为Mn2+,使正极材料LiMn2O4在柠檬酸溶液中的溶解率得以提高。     

LiCoO2对LiMn2O4改性过程的研究

在LiCoO2、LiMn2O4、LiNiO2这三种锂离子电池正极材料中,尖晶石LiMn2O4由于具有价廉、对环境友好、使用安全的显著优点,被普遍认为是最有希望的新型正极材料。但该材料在高温下较快的容量衰减制约了其规模应用[1~3]。为改善LiMn2O4的高温性能,各国学者普遍采用掺杂法,即在制备L     

改性LiMn2O4的高温电化学性能

采用高温固相反应法制备改性的LiMn2O4锂离子电池正极材料．利用SEM、XRD等方法表征产物的结构特性．结果表明：所得产物均具尖晶石型LiMn2O4结构,该样品经Li2CO3改性后用作锂离子电池正极,于常温和高温下的循环性能均得到明显改善．     

锂离子电池正极材料LiMn2-xCrxO4电化学性能的研究

针对尖晶石型LiMn2O4锂离子电池正极材料的容量衰减,提出了相应的抑制方法,所合成的LiMn2-xCrxO4(0相似文献   

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.