石英晶体微天平在聚合物薄膜研究中的应用与展望

石英晶体微天平仪(QCM)具有高度的灵敏性,能够对石英晶片表面微痕量物质的变化产生响应,在分析科学研究中广泛应用.本文阐述了QCM的基本工作原理和应用基础方程,并在此基础上综述了近年来QCM在聚合物薄膜研究中的应用及研究进展,包括QCM对聚合物薄膜的厚度和力学性能的测量、QCM研究聚合物分子链在石英晶片表面的吸附过程和链构象变化、表面引发生长聚合物刷的动力学过程、基于功能聚合物薄膜和QCM的生物与化学传感器等,同时对QCM在聚合物薄膜研究领域的进一步深入应用进行了展望.     

石英晶体微天平用于免疫球蛋白M免疫反应的动力学研究

在镀银电极的压电石英晶体表面涂覆甲基丙烯酸甲酯－甲基丙烯酸羟乙酯共聚物涂层，经ＣＮＢｒ活化后固定抗体，用石英晶体微天平技术监测ＩｇＭ抗原在压电石英晶体上的吸附与解吸过程，研究了免疫反应体系ＩｇＭ－抗人ＩｇＭ的反应动力学．结果表明：ＩｇＭ在压电石英晶体上的键合行为很好地符合Ｌａｎｇｍｕｉｒ吸附方程，免疫反应的结合常数Ｋａｓｓ为７．１０×１０￣７（ｍｏｌ／Ｌ）￣（－１）．在抗原过量情况下为一级反应。计算了ＩｇＭ免疫反应的活化能Ｅａ和不同温度下的反应速率常数ｋｆ．     

电化学石英晶体微天平及其应用

本文介绍了ＥＱＣＭ的原理及其应用，探讨了ＥＱＣＭ在生物大分子，纳米技术方面的应用，详细介绍了ＥＱＣＭ在气味检测，金属电沉积、药物分析等方面研究的优点和ＥＱＣＭ的发展前景。     

石英晶体微天平实时监测低密度脂蛋白在胆固醇修饰葡聚糖上的吸附及其动力学研究

利用石英晶体微天平实时监测低密度脂蛋白(LDL)在胆固醇修饰葡聚糖(CMD)上的吸附,并对其吸附动力学进行研究.结果表明,CMD与LDL之间的相互作用符合Langmuir吸附方程,当LDL浓度(ng/μL)为9.9,12.38和14.14时,其吸附平衡常数[K/(mol·L-1·s-1)]分别为0.0477,0.0536和0.0628,表面吸附量(ng/cm2)分别为107.6,139.6和167.9.最大吸附量达到284.8ng/cm2,吸附率为72.91%.     

石英晶体微天平（QCM）及其在电化学研究中的应用

本文文献综述近年来发展起来的石英晶体微天平(QCM)技术的理论、实验方法和它在电化学研究中应用的概况。     

电化学石英晶体微天平的近期应用进展

本文对近几年来电化学石英晶体微天平（EQCM）在吸附，膜的形成，腐蚀和电沉积等方面的应用进行了概述，并对其应用现状和前景进行了分析。     

电化学石英晶体微天平研究普鲁士蓝修饰电极

石英晶体徽天平(Quartz Crystal Microbalance,简称QCM)是一种非常灵敏的质量传感器,其检测能力可达ng级。QCM在化学中的早期应用是检测大气中的徽量成分,目前仍较活跃。由于石英压电晶体浸入溶液后在晶体/溶液界面存在较大的能量损失而不能够稳定振荡,致使QCM的应用较长时间局限于气相。八十年代初石英压电晶体在液相中的振荡终获成功,开辟了QCM应用的一个全新领域。液相中振荡成功后,QCM很快应用于电化学研究。目前已发展成为一种全新的电化学传感器——电化学石英晶体微天平(EQCM),并已用于金属电沉积、电化学腐蚀、电分析等方面的研究。     

石英晶体微天平的新进展

石英晶体微天平（quartz crystal microbalance,QCM）是一种对界面变化敏感的仪器,它已经在物理、化学、生物学、药物学、临床医学、环境科学等学科的界面问题研究中得到了一定的应用.然而,QCM在液相下的应用和推广一直受限于QCM数据定量解释的困难.为此,科研工作者发展了多种高级的QCM,比如带阻抗分析功能的QCM（impedance QCM,i-QCM）或带能量耗散监测功能的QCM（QCM with dissipation,QCM-D）,同时还发展了许多相应的理论模型.但是,对于多数生物、化学工作者来说,这些理论过于复杂.这极大地限制了QCM的推广和潜力发挥.本文以我们小组在QCM方面的研究工作为线索,对已报道的分析方法、模型和方程按5类应用条件进行了整理,给出了明确的界定标准：它们是：1,固-气界面;2,牛顿流体;3,固-液界面的薄膜;4,固-液界面厚膜;5,固-液界面超厚膜.对于每一类情况,我们将用通俗易懂的语言描述如何对QCM数据进行简化却又保证研究精度需要的定量分析.对于液态环境下的QCM数据的分析,我们着重介绍了＂固化水层＂模型,该模型允许QCM在一定的条件下成为一把＂分子尺＂,工作范围从几个纳米到数百纳米.该分子尺在多个创新界面问题研究中得到很好的应用.最后,我们从理论上分析了QCM作为生物传感器的先天缺陷--因基于面均质量检测的原理,QCM技术对溶液中蛋白的检测下限仅在1μg mL-1数量级.进一步,我们探索了QCM的发展方向和潜在应用领域,希望籍此能进一步推广QCM在各个学科界面问题中的研究应用.     

石英晶体微天平在手性识别中的应用

石英晶体微天平(QCM)是一类重要的质量型检测器,因具有灵敏度高、分析速度快、检测成本低等优点而具有极好的应用前景,现已广泛应用于环境监测、药物分析、食品质量控制等诸多领域。手性工程的崛起对简单、快速、在线的手性检测技术提出了挑战,QCM手性传感器就是其中一个重要的发展分支。该文简要介绍了QCM的典型实验装置和基本传感原理,详细综述了近年来QCM在手性识别领域的研究进展,包括以环糊精衍生物、分子印迹聚合物、氨基酸衍生物等为手性主体的QCM在手性识别中的应用,并对其今后的发展进行了展望。     

用石英晶体微天平研究表面活性剂在银固态表面上的动态吸附

吸附是表面活性剂的一个重要特征.迄今用于原位监测表面活性剂在固体表面上吸附重量变化的方法尚不多见.近年来压电石英晶体作为一种高灵敏的质量传感器(石英晶体微天平)已被用于大气和溶液中多种微量成分的监测.用石英晶体微天平研究I~-、Br~-和表面活性剂在金电极上的吸附行为亦有报道.本文研究了十六烷基三甲基溴化铵(CTAB)、十二烷基磺酸钠(SDSO)、十二烷基硫酸钠(SDS)在银固态表面上的吸附平衡动力学特性及其吸附机制.     

Batch Quartz Crystal Microbalance Immunosensor using a Protein-Immobilized Hydrophilic Polymer

This paper describes a novel batch-type quartz crystal microbalance immunosensor that incorporates a commercially available stainless-steel holder. The sensor was coated with a hydrophilic polymer interface containing phosphatidylcholine analogs that attract water and amino groups for the covalent attachment of receptors. The hydrophilic polymer on a gold substrate captured antibodies and reduced nonspecific adsorption. Operation of the immunosensor required only one sample injection. A clear response triggered by antigen-antibody binding was observed and allowed measurement of the IgG antibody concentration with a superior signal-to-noise ratio using only commercially available components. We thus demonstrate an inexpensive and readily available sensor.     

石英晶体微天平传感器及其在生物检测中应用的研究进展

石英晶体微天平(Quartz crystal microbalance,QCM)是一种具有灵敏度高、免标记、可实时在线检测等优点的重要分析工具。在生物检测领域,QCM与多种信号放大方法相结合,广泛应用于对生物分子的高灵敏检测。新型耗散型QCM(QCM-D)通过对薄膜厚度、粘弹性等的研究,主要用于考察生物分子的吸附分离、构型变化等微观过程。本文主要阐述了QCM及QCM-D生物传感器的构建及其在DNA、蛋白质、细胞和微生物检测中的研究进展。     

Improving the Sensitivity of a Quartz Crystal Microbalance for Biosensing by Using Porous Gold

 A quartz crystal microbalance can be used as a biosensor if biological receptor molecules (ligands) are attached to the crystal. To improve the sensitivity, the surface area of the gold electrodes on the crystal was increased by rendering the electrodes porous. This increased the response up to a factor of 3. A protein model system with human anti-myoglobin as ligand and sheep skeletal myoglobin at different concentrations as analyte was used. The quartz crystal was mounted in a flow-cell, where immobilisation, binding and regeneration of the surface were carried out. The kinetics of the model system was monitored under various experimental conditions. Received February 2, 2000. Revision June 30, 2000.     

Rapid Detection of Staphylococcal Enterotoxin B by Two-Dimensional Molecularly Imprinted Film-Coated Quartz Crystal Microbalance

We fabricated a two-dimensional (2D) molecularly imprinted sol-gel thin film-coated quartz crystal microbalance (QCM) for the rapid detection of staphylococcal enterotoxin B (SEB) by combining organosilanes and the template protein SEB on the surface of piezoelectric quartz crystal (PQC) Au-electrode by in-situ immobilization. The detection process was monitored by the QCM's frequency shift (Δf). The working range of this method was 1.0 × 10^?1–1.0 × 10³ µg/mL. The detection limit was 6.1 ng/mL, which was lower than that of the PQC immunosensor, and the detection period was within 0.5 h. The reproducibility of the imprinted film-coated QCM was satisfactory due to no significant statistical difference (P > 0.05) in the rapid detection of SEB between intra- and inter-batch. The selectivity of the imprinted sol-gel film showed that it could discriminate the template molecule from its analogues and other guest molecules. Compared with immunochip, the imprinted film-coated QCM is more advantageous in terms of simplicity, rapidity, low cost, and sensitivity. Moreover, in real sample analysis, the recoveries of this method were 89.4–106.63%, which can be considered a favorable and applicable method for the rapid determination of SEB in real samples.     

In situ Investigation on Layer-by-Layer Deposition of Polyelectrolytes by Quartz Crystal Microbalance

The effect of salt concentration on layer-by-layer deposition of poly(sodium 4-styrene sulfonate) (PSSS)/poly(vinylbenzyl trimethylammonium chloride) (PVTC) was investigated by use of quartz crystal microbalance with dissipation (QCM-D). The changes in frequency and dissipation demonstrate that the addition of NaCl leads the thickness of PSSS/PVTC multilayer to increase. The deposition of PSSS/PVTC is dominated by surface charge overcompensation level at lower salt concentrations. However, it is mainly determined by the interpenetration of polyelectrolytes at a higher salt concentration, as reflected in the oscillation of dissipation change.     

Impedance Characterization of a Quartz Crystal Microbalance

The impedance characteristics of the quartz crystal used in quartz crystal microbalance is considered a higher dimension of information that can be obtained in addition to the resonant frequency change of the crystal. The impedance allows calculating the quality factor of the oscillator that is very closely related to the mechanical rigidity of the material, which is adsorbed or deposited on the quartz crystal. This paper concentrates on utilizing an impedance analyzer, often found in electroanalytical laboratories, instead of the usually required network analyzer.     

杂交及切断过程的QCM实时检测研究(英文)

采用自组装技术,将 5′端标记有巯基的 20-merODN(oligo 1)以金 硫键形式牢固结合在 7. 995MHz的AT-切石英晶体的镀金表面,然后由石英晶体微天平实时检测了与碱基序列互补的 10 merODN (oligo 2)和 8 merODN(oligo 3)的杂交,同时还研究了稀土金属铈离子在温和条件下对DNA的水解切断作用.结果表明:应用QCM方法可能实时检测DNA的固定和杂交,Ce(IV)能随机切断单链DNA;但不能切断杂交形成的双链DNA,因此可利用杂交保护的方法对单链DNA实行定位切断.