Enhancement of wettability in low density polyethylene films using low pressure glow discharge N2 plasma

Low pressure glow discharge nitrogen plasma has been used to improve wettability in a low density polyethylene (LDPE) film for technical applications. The plasma treatment was carried out at a power of 300 W for different exposure times in the 1–20 min range. Wettability changes were analyzed using contact angle measurements. In addition to this, plasma‐treated samples were subjected to an aging process to determine the durability of the plasma treatment. X‐ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy were used for surface characterization. The nitrogen plasma treatment considerably reduced contact angle values thus indicating an increase in surface wettability. The spectroscopic study showed presence of oxygen‐based species on the plasma‐treated samples, which are mainly generated after the plasma treatment as a consequence of air exposure. These polar species contribute to improve surface functionalization, but this is almost lost during aging due to the hydrophobic recovery process. Microscopic studies revealed that also small changes in surface roughness occurred during the plasma treatment but these are very low compared to surface activation. The results confirmed that low pressure nitrogen can be considered as an environmentally efficient process to improve wettability in low density polyethylene films. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2390–2399, 2007     

含二氮杂萘酮结构聚醚砜酮膜的微波等离子体处理研究

含二氮杂萘酮结构型聚醚砜酮(ＰＰＥＳＫ)是近年来本研究组开发成功的新型耐高温聚合物[1].该聚合物具有优异的力学性能和突出的耐热性,玻璃化转变温度(Ｔｇ)为265～305℃(随砜酮比不同而变化),其结构式如下:ＯＮＮＯＳＯＯＯＮＮＯＣＯ　　研究表明,用ＰＰＥＳＫ制成的气体分离膜对Ｏ2/Ｎ2、ＣＯ2/Ｎ2有良好的气体渗透性和透过选择性[2,3],但由于其亲水性不高进而限制了它在纳滤膜和反渗透膜等方面的应用,因此有必要对其进行改性.目前,常用的膜及膜材料改性的方法有磺化、氯甲基化季胺化、接枝等化学改性和低温等离子体与辐射等物理改性.其…     

微波等离子体诱导聚乙烯表面接枝甲基丙烯酸甲酯

聚乙烯（ＰＥ）通常作为性能优良的薄膜材料被广泛使用,但由于其表面能低,导致表面亲水性差,粘结性弱,染色性能、印刷性能等很不理想［１,２］．在高分子材料的各种表面改性方法中,接枝共聚是一种很有效的途径［３～５］．本文探讨了用微波冷等离子体激活聚乙烯表面...     

Modification of Polyimide in Barrier Discharge Air-Plasmas: Chemical and Morphological Effects

Chemical and physical modifications of polyimide (PI) surfaces caused by an air plasma have been studied. The plasma-induced surface changes of PI were investigated by using a local dielectric barrier discharge (DBD) in air at atmospheric pressure and room temperature as a function of the plasma exposure time and plasma power, while the excitation frequency was kept constant at about 130 kHz. The first results obtained in this work suggest that DBDs operating in air at atmospheric pressure can be an efficient alternative plasma source for surface treatment of polymers: a short time air plasma treatment of few seconds leads to chemical and physical changes including the rise of wettability, surface oxidation, and enhancement of surface roughness. Therefore, this simple kind of dry surface treatment seems to be an effective, low cost method for production of well-adhering subsequent layers such as metal films, paints, glues, etc. on DBD pretreated polymers.     

Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment

In this work, low pressure glow discharge O₂ plasma has been used to increase wettability in a LDPE film in order to improve adhesion properties and make it useful for technical applications. Surface energy values have been estimated using contact angle measurements for different exposure times and different test liquids. In addition, plasma-treated samples have been subjected to an aging process to determine the durability of the plasma treatment. Characterization of the surface changes due to the plasma treatment has been carried out by means of Fourier transformed infrared spectroscopy (FTIR) to determine the presence of polar species such as carbonyl, carboxyl and hydroxyl groups. In addition to this, atomic force microscopy (AFM) analysis has been used to evaluate changes in surface morphology and roughness. Furthermore, and considering the semicrystalline nature of the LDPE film, a calorimetric study using differential scanning calorimetry (DSC) has been carried out to determine changes in crystallinity and degradation temperatures induced by the plasma treatment. The results show that low pressure O₂ plasma improves wettability in LDPE films and no significant changes can be observed at longer exposure times. Nevertheless, we can observe that short exposure times to low pressure O₂ plasma promote the formation of some polar species on the exposed surface and longer exposure times cause slight abrasion on LDPE films as observed by the little increase in surface roughness.     

Surface roughness and hydrophilicity enhancement of polyolefin‐based membranes by three kinds of plasma methods

The introduction of antibacterial property, conductivity, wettability and antithrombogenicity into polyolefin‐based membranes has evoked much attention, which can be achieved by coating hydrophilic polymers. Therefore, it is necessary to modify the roughness and hydrophilicity of polyolefin‐based membranes to enhance the coating ability. In this paper, three kinds of plasma methods, including inductively coupled (ICP) plasma, radio frequency low pressure (RFP) plasma and atmospheric dielectric barrier discharge (DBD) plasma, were used to modify the surface of the polyethylene (PE), polypropylene (PP) and polyester‐polypropylene (PET–PP) membranes. The surface roughness of the plasma‐modified PE, PP and PET–PP films was investigated by scanning electron microscopy (SEM) and atomic force microscope (AFM). The polar functional groups of films were observed by energy dispersive spectrometer (EDX) and X‐ray photoelectron spectroscopy (XPS). Besides, the hydrophilicity of the plasma‐modified PE, PP and PET–PP films was evaluated by water contact angle measurement. It was found that the surface roughness and hydrophilicity of plasma‐modified PE, PP and PET–PP films increased with the generation of oxygen‐containing functional groups (i.e. C―O, and C?O). The PET–PP membranes were treated by RFP plasma at different processing powers and times. These results indicated that plasma is an effective way to modify films, and the treatment time and power of plasma had a certain accumulation effect on the membranes' hydrophilicity. As for the roughness and hydrophilicity, the DBD plasma modifies the PE film, which is the optimum way to get the ideal roughness and hydrophilicity. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects on surface properties of natural bamboo fibers treated with atmospheric pressure argon plasma

Argon plasma at atmospheric pressure was used to improve the wettability and dyeability of natural bamboo fibers. Optical emission spectroscopy (OES) was employed to characterize the discharge. SEM and scanning probe microscopy (SPM) analyses show that the fiber surface becomes rougher after plasma treatment because of the effects of plasma bombardment and etching. The wettability and dyeability are significantly enhanced after plasma treatment. Longer treatment time, leading to rougher surface, results in better surface wettability and dyeability. These results reveal that atmospheric pressure argon plasma treatment is an effective method to improve the performance of bamboo fibers. Copyright © 2006 John Wiley & Sons, Ltd.     

Polymer matrix of polyethylene porous films functionalized by electrical discharge plasma

The polyethylene porous films were treated by dielectric surface barrier discharge (DSBD) plasma at atmospheric pressure in oxygen (O₂) or nitrogen (N₂), and by radio-frequency discharge (RFD) plasma in air at reduced pressure 46 Pa. The surface energy of films was carried out by direct measurements of contact angles of six testing liquids. The strength of adhesive joints in the system modified polyethylene porous films - polyacrylate was measured by peeling of the joints under the angle of 90°. The significant increase of the surface energy and its polar component of polyethylene porous films modified by all types of plasma were observed. The higher strengths of adhesive joints were found for modification of polyethylene porous films by radio-frequency discharge plasma in comparison with modification of the films by barrier discharge plasma.     

Treatment of a Polyethylene Powder Using a Remote Nitrogen Plasma Reactor Coupled with a Fluidized Bed: Influence on Wettability and Flowability

A Far Cold Remote Nitrogen Plasma is used both to fluidize and to treat a polyethylene powder in order to increase its hydrophilic character. The evolution of the wettability of the powder as well as the one of its physical (density, particles size distribution, average diameter, shape factor, and BET surface area) and flow properties (angle of repose, angle of slide, and Hausner index) are determined versus various experimental conditions. It is shown that the plasma treatment efficiency is strongly dependant on the oxygen content of the nitrogen flow and on the velocity of fluidizing gas. Best wettability is obtained by the addition of 0.75% of O₂ in the nitrogen plasma gas and with a high gas velocity. It is also evidenced that the flowability of the powder is slightly altered by the plasma treatment.     

TiOx Films Deposited by Plasma Enhanced Chemical Vapour Deposition Method in Atmospheric Dielectric Barrier Discharge Plasma

The plasma enhanced chemical vapour deposition method applying atmospheric dielectric barrier discharge (ADBD) plasma was used for TiO_x thin films deposition employing titanium (IV) isopropoxide and oxygen as reactants, and argon as a working gas. ADBD was operated in the filamentary mode. The films were deposited on glass. The films?? chemical composition, surface topography, wettability and aging were analysed, particularly the dependence between precursor and reactant concentration in the discharge atmosphere and its impact on TiO_x films properties. Titanium in films near the surface area was oxidized, the dominating species being TiO₂ and substoichiometric titanium oxides. The films exhibited contamination with carbon, as a result of atmospheric oxygen and carbon dioxide reactions with radicals in films. No relevant difference of the film surface due to oxygen concentration inside the reactor was determined. The films were hydrophilic immediately after deposition, afterwards their wettability diminished, due to chemical reactions of the film surface and chemical groups involved in the atmosphere.