Reactivity and stability of platinum(II) formyl complexes based on PCP-type ligands. The significance of sterics

The synthesis and characterization of several Pt(ii) complexes, including formyl complexes, based on the PCP-type pincer ligands C(6)H(4)[CH(2)P(iPr)(2)](2) ((iPr)PCP) and C(6)H(4)[CH(2)P(tBu)(2)](2) ((tBu)PCP) are described. The chloride complex ((iPr)PCP)PtCl (6) and the unsaturated cationic complexes [(PCP)Pt](+)X(-) (X = OTf(-), BF(4)(-)) (1, 7), based on both PCP ligands, were prepared and the latter reacted with carbon monoxide to give the corresponding cationic carbonyl complexes [(PCP)Pt(CO)](+)X(-) (X = OTf(-), BF(4)(-)) (2, 8a). Hydride nucleophilic attack on both carbonyl complexes resulted in rare neutral platinum formyl complexes ((iPr)PCP)Pt(CHO) (3) and ((tBu)PCP)Pt(CHO) (9). Complex 3 undergoes decarbonylation to the corresponding hydride complex within hours at room temperature, while the bulkier complex 9 is more stable and undergoes complete decarbonylation only after 3-4 d. This observation demonstrates the very significant steric effect of the ligand on stabilization of the corresponding formyl complexes. Reaction of complex 9 with triflic acid resulted in the carbonyl complex [((tBu)PCP)Pt(CO)](+) OTf(-) (8b) with liberation of H(2), an unusual transformation for a metal formyl. Reaction with methyl triflate resulted in the Fischer carbene-type complex, the methoxy-methylidene [((tBu)PCP)Pt(CHOCH(3))](+)OTf(-) (11). The X-ray structures of complexes 2, 6, 8a and 11 were determined.     

Novel Chemistry of the Aromatic 1,2,4-Triphospholyl and 1,3,-Diphospholyl Anions,P 3 C 2 t Bu 2 and P 2 C 3 t Bu 3 , and the 1,3,5-Triphosphabenzene,P 3 C 3 t Bu 3

Oxidative coupling of the P 3 C 2 t Bu 2 anion with I 2 affords a convenient synthetic route to the remarkable hexaphosphapentaprismane cage P 6 C 4 t Bu 4 , which undergoes ready insertion reactions of carbene like fragments such as S, Se, Te, SnR 2 specifically into the P--P bond, which in turn connects the two P 3 C 2 t Bu 2 fragments. Di- and tri-phospholyl compounds MP 3 C 2 t Bu 2 (M = Ga, In, Tl), M'(P 3 C 2 t Bu 2 ) 2 (M' = Zn, Cd, Hg), and [1 + 4] cyclo-additions of the triphosphabenzene, P 3 C 3 t Bu 3 , and extrusion of the t BuC or P moeities from the 6-membered ring are presented.     

(tBu2PCH2SiMe2)2N]RuCH3: the origin of extremely facile, double H-C(sp3) activation generating a "hydrido-carbene" complex

The four-coordinate compound [(tBu2PCH2SiMe2)2N]RuCH3 undergoes rapid double H-C(sp3) activation at -78 degrees C to generate a "hydrido-carbene" complex. DFT calculations suggest that the origin of the low barrier to methane elimination is an alpha-agostic interaction in the low-lying singlet state of the highly unsaturated (PNP)RuMe. The hydrido-carbene complex can be viewed as a "masked" resting state of the four-coordinate cyclometalated alkyl complex, [(tBu2PCH2SiMe2)N(Me2SiCH2P(tBu)(C(CH3)2CH2)]Ru, where hydride migration from metal to carbon occurs before any subsequent reactivity.     

CO2 and formate complexes of phosphine/borane frustrated Lewis pairs

The reaction of a solution of B(C6F4H)3 and either iPr3P or tBu3P with CO2 afforded the species R3P(CO2)B(C6F4H)3 (R=iPr (1), tBu (2)). In a similar fashion the boranes, RB(C6F5)2 (R=hexyl, cyclohexyl (Cy), norbornyl), ClB(C6F5)2, or PhB(C6F5)2 were combined with tBu3P and CO2 to give the species tBu3P(CO2)BR(C6F5)2 (R=hexyl (3), Cy (4), norbornyl (5), Cl (6), Ph (7)). Similarly, the compounds [tBu3PH][RBH(C6F5)2] (R= hexyl (8), Cy (9), norbornyl (10)) were prepared by reaction of the precursor frustrated Lewis pair (FLP) with H2. Subsequent reactions of 9 and 10 with CO2 afforded the species [((C6F5)2BR)2(μ-HCO2)][tBu3PH] (R= Cy (11), norbornyl (12)). In related chemistry, combinations of the boranes RBG(C6F5)2 (R=hexyl, Cy, norbornyl) with tBu3P treated with an equivalent of formic acid gave [(C6F5)2BR(HCO2)][tBu3PH] (R=hexyl (13), Cy (14), norbornyl (15)). Subsequent addition of an additional equivalent of borane provides a second synthetic route to 11 and 12. Crystallographic studies of compounds 2-6 and 8-14 are reported and discussed. Further understanding of the FLP complexation and activation of CO2 is provided by computational studies.     

Stepwise Formation of a 1,3‐Butadiene Analogue of Mixed Heavier Group 15 Elements

The reaction of the phosphinidene complex [Cp*P{W(CO)₅}₂] ( 1 a ) with di‐tert‐butylcarboimidophosphene leads to the P? C cage compound 6 and the Lewis acid–base adduct [Cp*P{W(CO)₅}₂(CNtBu)] ( 2 a ). In contrast, the arsinidene complex shows a different reactivity. At low temperatures, the arsaphosphene complex [{W(CO)₅}{η²‐(Cp*)As?P(tBu)}{W(CO)₅}] ( 3 ) is formed. At these temperatures, 3 reacts further with a second equivalent of carboimidophosphene to form [{W(CO)₅}{η²‐{(Cp*)(tBu)P}As?P(tBu)}{W(CO)₅}] ( 5 ), probably by the insertion of a phosphinidene unit (tBuP) into an As? C bond. In contrast, at room temperature 3 reacts further by a radical‐type reaction to form [{(tBu)P?As? As?P(tBu)}{W(CO)₅}₄] ( 4 ). Compound 4 is the first example of a neutral, 1,3‐butadiene analogue containing only mixed heavier Group 15 elements. It consists of two P?As double bonds connected by arsenic atoms.     

Competitive ArC-H and ArC-X (X = Cl, Br) activation in halobenzenes at cationic titanium centers

The titanium methyl cation [Cp*((tBu3P=N)TiCH3]+ [B(C6F5)4]- reacts rapidly with H2 to give the analogous cationic hydride [Cp*((tBu3P=N)TiH(THF)n]+ [B(C6F5)4]- (n = 0, 1), which can be trapped and isolated as its THF adduct 1 x THF (n = 1). When generated in the presence of chloro or bromobenzene, 1 undergoes C-X activation or ortho-C-H activation, depending on the amount of dihydrogen present in the reaction medium. At approximately 4 atm of H2, C-X activation is preferred, giving the halocations [Cp*((tBu3P= N)TiX]+ [B(C6F5)4]- (2X) and C6H6/biphenyl mixtures. At lower pressures of H2 (>1 atm), the beta-halophenyl cations [Cp*((tBu3P=N)Ti(2-X-C6H4)]+ [B(C6F5)4]- (3X) are the products isolated. In the absence of H2, these compounds are quite thermally stable, but undergo beta-halogen elimination upon moderate heating, to give 2X (approximately 20%) and compounds 4X which are the result of reaction between 2X and benzyne via addition of the benzyne C-C triple bond across the Ti-N bond of the phosphinimide ligand. Thus, three separate bond activation processes are operative in this system: direct C-X activation, ortho-C-H activation, and indirect C-X activation via beta-halogen elimination. Mechanistic studies on all three processes have been done and support a radical pathway for direct C-X cleavage, sigma-bond metathesis of the ortho-C-H bond of eta(1)-coordinated C6H5X, and beta-halogen elimination from base-free compound 3X.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

Synthesis and reactivity of copper(I) complexes containing a bis(imidazolin-2-imine) pincer ligand

The new pincer ligand 2,6-bis[(1,3-di-tert-butylimidazolin-2-imino)methyl]pyridine (TL(tBu)) has been prepared in high yield from 2,6-bis(hydroxymethyl)pyridine (1) and 1,3-di-tert-butylimidazolin-2-imine (3). Reaction of TL(tBu) with [Cu(MeCN)4]PF6 affords the highly reactive copper(I) complex [(TL(tBu))Cu]PF6, [5]PF6, which forms the stable copper(I) isocyanide complexes [6a]PF6 (nu(CN) = 2179 cm(-1)) and [6b]PF6 (nu(CN) = 2140 cm(-1)) upon addition of tert-butyl or 2,6-dimethylphenyl isocyanide, respectively. For the cations 6a and 6b, DFT calculations reveal ground-state electronic structures of the type [(TL(tBu)-kappaN(1):kappaN(2))Cu(CNR)] with tricoordinate geometries around the copper atoms. Exposure of [5]PF6 to the air readily leads to trapping of atmospheric CO2 to form the square-planar complex [(TL(tBu))Cu(HCO3-kappaO)]PF6, [7]PF6, with the bicarbonate ligand adopting a rarely observed monodentate coordination mode. In chlorinated solvents such as dichloromethane or chloroform, [5]PF(6) rapidly abstracts chloride by reductive dechlorination of the solvent to yield [(TL(tBu))CuCl]PF6, [8]PF6 quantitatively. Reaction of TL(tBu) with copper(I) bromide or chloride affords complexes 9a and 9b, respectively, for which X-ray diffraction analysis, low-temperature NMR experiments and DFT calculations reveal the presence of a kappa(2)-coordinated ligand of the type [(TL(tBu)-kappaN(1):kappaN(2))CuX]. In solution, complex 9b undergoes slow disproportionation forming the mixed-valence copper(II)/copper(I) system [(TL(tBu))CuCl][CuCl2], [8]CuCl2 with a linear dichlorocuprate(I) counterion.     

P=C bonds as building blocks for three- and four-membered heterocyclic cations: synthesis, structures and mechanistic studies

The activation of the P=C bond of phosphaalkenes with electrophiles is investigated as a means to prepare and characterize unusual organophosphorus compounds. Treatment of RP=CHtBu (1a: R=tBu; 1b: R=1-adamantyl) with HOTf (0.5 equiv) affords diphosphiranium salts [RP-CHtBu-PR (CH(2)tBu)]OTf ([2a]OTf and [2b]OTf), each containing a three-membered P(2)C ring. In contrast, the addition of MeOTf (0.5 equiv) to either 1a or 1b affords diphosphetanium salts [RP-CHtBu-P(Me)R-CHtBu]OTf ([3a]OTf and [3b]OTf) containing four-membered P(2)C(2) heterocycles. The phosphenium triflate [tBuP(CH(2)tBu)]OTf ([5a]OTf) and methylenephosphonium triflate [tBu(Me)P=CHtBu]OTf ([7a]OTf) are identified spectroscopically as intermediates in the formation of [2a](+) and [3a](+), respectively. The phosphenium triflate intermediate can be trapped with 2-butyne to afford phosphirenium salt [MeC=CMe-tBuPCH(2)tBu]OTf ([6a]OTf). Treatment of diphosphetanium [3a]OTf with an excess MeOTf affords [Me(2)P-CHtBu-PMetBu-CHtBu](OTf)(2) ([4a](OTf)(2)), a compound containing a diphosphetanium dication. The molecular structures are reported for [2a]OTf, [2b][H(OTf)(2)], [3a]I, [3b]I, [4a](OTf)(2), and [6a]OTf.     

Synthesis and structural characterization of unprecedented bis-asymmetric heteroscorpionate U(III) complexes: [U(kappa3-H2B(pztBu,Me)(pzMe,tBu))2I] and [U(kappa3-H2B(pztBu,Me)(pzMe2))2I

[UI(3)(THF)(4)] reacts at room temperature with 2 equiv of KBp(tBu,Me), in toluene, yielding [U(kappa(3)-H(mu-H)B(pz(tBu,Me))(pz(Me,tBu)))(2)I] (1). This unprecedented complex, stabilized by two asymmetric heteroscorpionate ligands, is formed due to an isomerization process promoted in situ by the metal center. To find a general method for preparing this type of compound, we synthesized the novel asymmetric K[H(2)B(pz(tBu,Me))(pz(Me2))], and by a straightforward salt metathesis with [UI(3)(THF)(4)] the novel bis-asymmetric complex [U(kappa(3)-H(mu-H)B(pz(tBu,Me))(pz(Me2)))(2)I] (2) was isolated and characterized in the solid state and in solution. As indicated by X-ray crystallographic analysis, the U(III) in 1 and 2 is seven-coordinated by two tridentate asymmetric dihydrobis(pyrazoly)borates and by an iodide. In both cases, the coordination geometry around the metal is very distorted, the pentagonal bipyramid being the one which better describes the arrangement of the atoms around the U(III). An approximate C(2) axis can be defined in the solid state, and is maintained in solution as indicated by the (1)H NMR spectrum of 1 and 2. In the course of attempting to crystallize some of the compounds, monocrystals of the dimer [U(kappa(3)-Bp(tBu,Me))(Hpz(tBu,Me))I(mu-I)](2) (3) were isolated. In this compound each U(III) atom is seven-coordinated by one kappa(3)-Bp(tBu,Me), by one terminal and by two bridging iodide ligands, and by a monodentate Hpz(tBu,Me), exhibiting a distorted 4:3 tetragonal base-trigonal geometry.     

Olefin Isomerization by Iridium Pincer Catalysts. Experimental Evidence for an η(3)-Allyl Pathway and an Unconventional Mechanism Predicted by DFT Calculations

The isomerization of olefins by complexes of the pincer-ligated iridium species ((tBu)PCP)Ir ((tBu)PCP = κ(3)-C(6)H(3)-2,6-(CH(2)P(t)Bu(2))(2)) and ((tBu)POCOP)Ir ((tBu)POCOP = κ(3)-C(6)H(3)-2,6-(OP(t)Bu(2))(2)) has been investigated by computational and experimental methods. The corresponding dihydrides, (pincer)IrH(2), are known to hydrogenate olefins via initial Ir-H addition across the double bond. Such an addition is also the initial step in the mechanism most widely proposed for olefin isomerization (the "hydride addition pathway"); however, the results of kinetics experiments and DFT calculations (using both M06 and PBE functionals) indicate that this is not the operative pathway for isomerization in this case. Instead, (pincer)Ir(η(2)-olefin) species undergo isomerization via the formation of (pincer)Ir(η(3)-allyl)(H) intermediates; one example of such a species, ((tBu)POCOP)Ir(η(3)-propenyl)(H), was independently generated, spectroscopically characterized, and observed to convert to ((tBu)POCOP)Ir(η(2)-propene). Surprisingly, the DFT calculations indicate that the conversion of the η(2)-olefin complex to the η(3)-allyl hydride takes place via initial dissociation of the Ir-olefin π-bond to give a σ-complex of the allylic C-H bond; this intermediate then undergoes C-H bond oxidative cleavage to give an iridium η(1)-allyl hydride which "closes" to give the η(3)-allyl hydride. Subsequently, the η(3)-allyl group "opens" in the opposite sense to give a new η(1)-allyl (thus completing what is formally a 1,3 shift of Ir), which undergoes C-H elimination and π-coordination to give a coordinated olefin that has undergone double-bond migration.     

Three-coordinate Co(I) provides access to unsaturated dihydrido-Co(III) and seven-coordinate Co(V)

The three-coordinate, T-shaped Co(I) complex, PNPCo (PNP = [(tBu2PCH2SiMe2)2N-], is readily synthesized by magnesium reduction of divalent PNPCoCl. Triplet (S = 1) PNPCo is coordinatively and electronically unsaturated and undergoes a thermally reversible oxidative addition reaction with H2, producing trivalent PNPCo(H)2. In contrast, the reaction with excess primary silane PhSiH3 quantitatively generates the base-stabilized silylene Co(V) compound {kappa2-tBu2PCH2Me2SiNSiMe2CH2tBu2P(H)Si=}Co(H)3(SiH2Ph)2.     

Polynuclear bismuth-oxo clusters: insight into the formation process of a metal oxide

The reaction of the bismuth silanolates [Bi(OSiR2R')3] (R = R' = Me, Et, iPr; R = Me, R' = tBu) with water has been studied. Partial hydrolysis gave polynuclear bismuth-oxo clusters whereas amorphous bismuth-oxo(hydroxy) silanolates were obtained when an excess of water was used in the hydrolysis reaction. The metathesis reaction of BiCl3 with NaOSiMe3 provided mixtures of heterobimetallic silanolates. The molecular structures of [Bi18Na4O20(OSiMe3)18] (2), [Bi33NaO38(OSiMe3)24].3 C7H8 (3.3 C7H8), [Bi50Na2O64(OH)2(OSiMe3)22].2 C7H8.2H2O (4.2 C7H8.2 H2O), [Bi4O2(OSiEt3)8] (5), [Bi9O7(OSiMe3)13].0.5 C7H8 (6. 0.5C7H8), [Bi18O18(OSiMe3)18)].2C7H8 (7. 2C7H8) and [Bi20O18(OSiMe3)24].3C7H8 (8.3C7H8) are presented and compared with the solid-state structures of [Bi22O26(OSiMe2tBu)14] (9) and beta-Bi2O3. Compound 2 crystallises in the triclinic space group P1 with the lattice constants a = 17.0337(9), b = 19.5750(14), c = 26.6799(16) A, alpha = 72.691(4), beta = 73.113(4) and gamma = 70.985(4) degrees ; compound 3.3C7H8 crystallises in the monoclinic space group P2(1)/n with the lattice constants a = 20.488(4), b = 22.539(5), c = 26.154(5) A and beta = 100.79(3) degrees ; compound 4.2C7H82 H2O crystallises in the monoclinic space group P2(1)/n with the lattice constants a = 20.0518(12), b = 24.1010(15), c = 27.4976(14) A and beta = 103.973(3) degrees ; compound 5 crystallises in the monoclinic space group P2(1)/c with the lattice constants a = 25.256(5), b = 15.372(3), c = 21.306(4) A and beta = 113.96(3) degrees ; compound 6.0.5C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 15.1916(9), b = 15.2439(13), c = 22.487(5) A, alpha = 79.686(3), beta = 74.540(5) and gamma = 66.020(4) degrees ; compound 7.2C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 14.8295(12), b = 16.1523(13), c = 18.4166(17) A, alpha = 75.960(4), beta = 79.112(4) and gamma = 63.789(4) degrees ; and compound 8.3C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 17.2915(14), b = 18.383(2), c = 18.4014(18) A, alpha = 95.120(5), beta = 115.995(5) and gamma = 106.813(5) degrees . The molecular structures of the bismuth-rich compounds are related to the CaF2-type structure. Formally, the hexanuclear [Bi6O8]2+ fragment might be described as the central building unit, which is composed of bismuth atoms placed at the vertices of an octahedron and oxygen atoms capping the trigonal faces. Depending on the reaction conditions and the identity of R, the thermal decomposition of the hydrolysis products [Bi(n)O(l)(OH)(m-)(OSiR3)(3n-(2l-m))] gives alpha-Bi2O3, beta-Bi2O3, Bi12SiO20 or Bi4Si3O12.     

Photocycloaddition Reactions of 5,5‐Dimethyl‐3‐(3‐methylbut‐3‐en‐1‐ynyl)cyclohex‐2‐en‐1‐one

The title cyclohexenone 1d undergoes photodimerization selectively at the exocyclic C?C bond to give a 1 : 1 mixture of 1,2‐dialkynyl‐1,2‐dimethylcyclobutanes 6 and 7 . On irradiation in the presence of 2,3‐dimethylbuta‐1,3‐diene, 1d affords bicyclo[8.4.0]tetradeca‐1,2,3,7‐tetraen‐11‐one 9 . This – formal – (6+4)‐cycloadduct undergoes quantitative isomerization to 3‐cycloheptadienyl‐2,5,5‐trimethylcyclohex‐2‐enone 11 on treatment with basic silica gel.     

Alkali metal complexes of sterically demanding amino-functionalized secondary phosphanide ligands

The reaction between {(Me(3)Si)(2)CH}PCl(2) (4) and one equivalent of either [C(6)H(4)-2-NMe(2)]Li or [2-C(5)H(4)N]ZnCl, followed by in situ reduction with LiAlH(4) gives the secondary phosphanes {(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))PH (5) and {(Me(3)Si)(2)CH}(2-C(5)H(4)N)PH (6) in good yields as colourless oils. Metalation of 5 with Bu(n)Li in THF gives the lithium phosphanide [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]Li(THF)(2)] (7), which undergoes metathesis with either NaOBu(t) or KOBu(t) to give the heavier alkali metal derivatives [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]Na(tmeda)] (8) and [[{(Me(3)Si)(2)CH}(C(6)H(4)-2-NMe(2))P]K(pmdeta)] (9) after recrystallization in the presence of the corresponding amine co-ligand [tmeda = N,N,N',N'-tetramethylethylenediamine, pmdeta = N,N,N',N',N'-pentamethyldiethylenetriamine]. The pyridyl-functionalized phosphane 6 undergoes deprotonation on treatment with Bu(n)Li to give a red oil corresponding to the lithium compound [{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]Li (10) which could not be crystallized. Treatment of this oil with NaOBu(t) gives the sodium derivative [{[{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]Na}(2) x (Et(2)O)](2) (11), whilst treatment of with KOBu(t), followed by recrystallization in the presence of pmdeta gives the complex [[{(Me(3)Si)(2)CH}(2-C(5)H(4)N)P]K(pmdeta)](2) (12). Compounds 5-12 have been characterised by (1)H, (13)C{(1)H} and (31)P{(1)H} NMR spectroscopy and elemental analyses; compounds 7-9, and 12 have additionally been characterised by X-ray crystallography. Compounds 7-9 crystallize as discrete monomers, whereas 11 crystallizes as an unusual dimer of dimers and 12 crystallizes as a dimer with bridging pyridyl-phosphanide ligands.     

Mixed-transition-metal acetylides: synthesis and characterization of complexes with up to six different transition metals connected by carbon-rich bridging units

The synthesis and reaction chemistry of heteromultimetallic transition-metal complexes by linking diverse metal-complex building blocks with multifunctional carbon-rich alkynyl-, benzene-, and bipyridyl-based bridging units is discussed. In context with this background, the preparation of [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-(PPh(2))C(6)H(3)] (10) (dppf = 1,1'-bis(diphenylphosphino)ferrocene; tBu(2)bpy = 4,4'-di-tert-butyl-2,2'-bipyridyl; Ph = phenyl) is described; this complex can react further, leading to the successful synthesis of heterometallic complexes of higher nuclearity. Heterotetrametallic transition-metal compounds were formed when 10 was reacted with [{(eta(5)-C(5)Me(5))RhCl(2)}(2)] (18), [(Et(2)S)(2)PtCl(2)] (20) or [(tht)AuC[triple bond]C-bpy] (24) (Me = methyl; Et = ethyl; tht = tetrahydrothiophene; bpy = 2,2'-bipyridyl-5-yl). Complexes [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)RhCl(2)(eta(5)-C(5)Me(5))}C(6)H(3)] (19), [{1-[(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C]-3-[(tBu(2)bpy)(CO)(3)ReC[triple bond]C]-5-(PPh(2))C(6)H(3)}(2)PtCl(2)] (21), and [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)AuC[triple bond]C-bpy}C(6)H(3)] (25) were thereby obtained in good yield. After a prolonged time in solution, complex 25 undergoes a transmetallation reaction to produce [(tBu(2)bpy)(CO)(3)ReC[triple bond]C-bpy] (26). Moreover, the bipyridyl building block in 25 allowed the synthesis of Fe-Ru-Re-Au-Mo- (28) and Fe-Ru-Re-Au-Cu-Ti-based (30) assemblies on addition of [(nbd)Mo(CO)(4)] (27), (nbd = 1,5-norbornadiene), or [{[Ti](mu-sigma,pi-C[triple bond]CSiMe(3))(2)}Cu(N[triple bond]CMe)][PF(6)] (29) ([Ti] = (eta(5)-C(5)H(4)SiMe(3))(2)Ti) to 25. The identities of 5, 6, 8, 10-12, 14-16, 19, 21, 25, 26, 28, and 30 have been confirmed by elemental analysis and IR, (1)H, (13)C{(1)H}, and (31)P{(1)H} NMR spectroscopy. From selected samples ESI-TOF mass spectra were measured. The solid-state structures of 8, 12, 19 and 26 were additionally solved by single-crystal X-ray structure analysis, confirming the structural assignment made from spectroscopy.     

Monocarbaborane anion chemistry. [COOH], [CH2OH] and [CHO] units as functional groups on ten-vertex monocarbaborane anionic compounds

B(10)H(14) reacts with para-C(6)H(4)(CHO)(COOH) in aqueous KOH solution to give the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-COOH)](-) anion 1, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-COOH)](-) anion 2. Upon heating, anion 2 rearranges to form the [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-COOH)](-) anion 3. Similarly, B(10)H(14) with glyoxylic acid OHCCOOH in aqueous KOH gives the [arachno-6-CB(9)H(13)-6-(COOH)](-) anion 4, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(COOH)](-) anion 5. Upon heating, anion 5 rearranges to give the [closo-1-CB(9)H(9)-1-(COOH)](-) anion 6. Reduction of the [COOH] anions 3 and 6 with diisobutylaluminium hydride gives the [CH(2)OH] hydroxy anions [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) and [closo-1-CB(9)H(9)-1-(CH(2)OH)](-) 8 respectively. The [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) anion 7 can also be made via isomerisation of the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-CH(2)OH)](-) anion 9, in turn obtained from the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-CH(2)OH)](-) anion 10, which is obtained from the reaction of B(10)H(14) with terephthaldicarboxaldehyde, C(6)H(4)-para-(CHO)(2), in aqueous KOH solution. Oxidation of the hydroxy anions 7 and 8 with pyridinium dichromate gives the aldehydic [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CHO)](-) anion 11 and the aldehydic [closo-1-CB(9)H(9)-1-(CHO)](-) anion 12 respectively, characterised as their 2,4-dinitrophenylhydrazone derivatives, the [closo-1-CB(9)H(9)-1-C(6)H(4)-para-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion 13 and the [closo-1-CB(9)H(9)-1-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion respectively.     

Cationic rare-earth metal SALEN complexes

Complexes (Salpren(tBu,tBu))Y[N(SiHMe2)2](thf) and (SALEN(tBu,tBu))La[N(SiHMe2)2](thf) (SALEN(tBu,tBu) = Salcyc(tBu,tBu) and Salpren(tBu,tBu)) were prepared from Ln[N(SiHMe2)2]3(thf)2 and H2SALEN(tBu,tBu). The yttrium complex was characterized by X-ray crystallography revealing intrinsic solid-state structural features: the metal centre is displaced by 1.05 angstroms from the [N2O2] least squares plane of a highly bent Salpren(tBu,tBu) ligand (angle(Ph,Ph) dihedral angle of 80.4(1) degrees ) and is coordinated asymmetrically by the silylamide ligand exhibiting one significant Y---(HSi) beta-agostic interaction (Y-N1-Si1, 106.90(9) degrees; Y---Si1, 3.2317(6) angstroms). Complexes (SALEN(tBu,tBu))Ln[N(SiHMe2)2](thf)n (n = 1, Sc; n = 2, Y, La) react with ammonium tetraphenylborate to form the ion pairs [(SALEN(tBu,tBu))Ln(thf)n][BPh4]. The cationisation was proven by X-ray crystal structure analyses of [(Salpren(tBu,tBu))Sc(thf)2][B(C6H5)4].2(thf) and [(Salpren(tBu,tBu))Ln(thf)3][B(C6H5)4].4(thf) (Ln = Y, La), showing an octahedral and pentagonal-bipyramidal coordination geometry, respectively.     

Functionalization of aminophosphanes: synthesis and X-ray crystal structure of novel dilithium and trilithium complexes containing silicon-fused heteronuclear SiN2PLi five-membered rings

A first structurally characterized primary aminophosphane (Ar 2PNH 2 ( 2); Ar = 2,4,6- iPr 3C 6H 2) that is a stable solid at room temperature without decomposition by self-condensation is reported. Reactions of N-phosphanyllithium amide ( tBu 2PNHLi ( 3)) with Me 2SiCl 2 and MeSiCl 3 in Et 2O result in the formation of Me 2Si(NHP tBu 2) 2 ( 4) and MeSi(NHP tBu 2) 3 ( 5), respectively. Subsequent treatment of 4 and 5 with 2 and 3 equiv of nBuLi gave the dilithium ( 6) and trilithium ( 7) complexes, respectively. Further treatment of 5 with 3 equiv of AlMe 3 yielded the trialuminum complex MeSi[N(AlMe 2)P tBu 2] 3 ( 8). These three complexes were investigated by microanalysis and multinuclear NMR spectroscopy. The dilithium complex [Me 2Si(NLiP tBu 2) 2.3THF] ( 6) and the trilithium complex [MeSi(NLiP tBu 2) 3.3Et 2O] ( 7) were further characterized by single-crystal X-ray structural analysis.     

Ni, Pd, Pt, and Ru complexes of phosphine-borate ligands

The species Cy(2)PHC(6)F(4)BF(C(6)F(5))(2) reacts with Pt(PPh(3))(4) to yield the new product cis-(PPh(3))(2)PtH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 1 via oxidative addition of the P-H bond of the phosphonium borate to Pt(0). The corresponding reaction with Pd(PPh(3))(4) affords the Pd analogue of 1, namely, cis-(PPh(3))(2)PdH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 3; while modification of the phosphonium borate gave the salt [(PPh(3))(3)PtH][(tBu(2)PC(6)F(4)BF(C(6)F(5))(2))] 2. Alternatively initial deprotonation of the phosphonium borate gave [tBu(3)PH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 4, [SIMesH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 5 which reacted with NiCl(2)(DME) yielding [BaseH](2)[trans-Cl(2)Ni(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 6, SIMes 7) or with PdCl(2)(PhCN)(2) to give [BaseH](2)[trans-Cl(2)Pd(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 8, SIMes 9). While [C(10)H(6)N(2)(Me)(4)H][tBu(2)PC(6)F(4)BF(C(6)F(5))(2)] 10 was also prepared. A third strategy for formation of a metal complex of anionic phosphine-borate derivatives was demonstrated in the reaction of (COD)PtMe(2) with the neutral phosphine-borane Mes(2)PC(6)F(4)B(C(6)F(5))(2) affording (COD)PtMe(Mes(2)PC(6)F(4)BMe(C(6)F(5))(2)) 11. Extension of this reactivity to tBu(2)PH(CH(2))(4)OB(C(6)F(5))(3)) was demonstrated in the reaction with Pt(PPh(3))(4) which yielded cis-(PPh(3))(2)PtH(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)) 12, while the reaction of [SIMesH][tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)] 13 with NiCl(2)(DME) and PdCl(2)(PhCN)(2) afforded the complexes [SIMesH](2)[trans-Cl(2)Ni(tBu(2)PC(4)H(8)OB(C(6)F(5))(3))(2)] 14 and [SIMesH](2)[trans-PdCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))(2)] 15, respectively, analogous to those prepared with 4 and 5. Finally, the reaction of 7 and 13with [(p-cymene)RuCl(2)](2) proceeds to give the new orange products [SIMesH][(p-cymene)RuCl(2)(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))] 16 and [SIMesH][(p-cymene)RuCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))] 17, respectively. Crystal structures of 1, 6, 10, 11, 12, and 16 are reported.