Determination of europium by using the chemical oscillating system of Ce(IV)-KBrO<Subscript>3</Subscript>-acetone-oxalic acid-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

A sensitive and convenient method for the determination of trace europium ions using an oscillating chemical reaction involving Ce(IV) - KBrO₃ - acetone - oxalic acid - H₂SO₄ was proposed. The results indicated that the changes in oscillating period (T) was linearly proportional to the negative logarithmic concentration of Eu³⁺ (-log C) in the range of 1.41 × 10⁻⁸ ˜ 1.41 × 10⁻⁴ mol L⁻¹ (r = 0.9982) with a detection limit of 1.04 × 10⁻⁹ mol L⁻¹. The recoveries were limited to the range of 99.5% to 100.8%. Under the same conditions, other rare earth ions did not interfere with the determination of Eu³⁺. In addition, a perturbation mechanism was also discussed briefly.      

2-pyrrolidone - capped Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals

Water-soluble Mn₃O₄ nanocrystals have been prepared through thermal decomposition in a high temperature boiling solvent, 2-pyrrolidone. The final product was characterized with XRD, SEM, TEM, FTIR and Zeta Potential measurements. Average crystallite size was calculated as ∼15 nm using XRD peak broadening. TEM analysis revealed spherical nanoparticles with an average diameter of 14±0.4 nm. FTIR analysis indicated that 2-pyrrolidone coordinates with the Mn₃O₄ nanocrystals only via O from the carbonyl group, thus confining their growth and protecting their surfaces from interaction with neighboring particles.      

Methylcellulose/SiO<Subscript>2</Subscript> hybrids: sol-gel preparation and characterization by XRD,FTIR and AFM

Methylcellulose (MC) / SiO₂ organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO₂. AFM depicts surface roughness which depends on the silica precursor and MC content.      

Dispersive liquid-liquid microextraction and liquid chromatographic determination of pentachlorophenol in water

A simple and sensitive dispersive liquid-liquid microextraction method for extraction and preconcentration of pentachlorophenol (PCP) in water samples is presented. After adjusting the sample pH to 3, extraction was performed in the presence of 1% W/V sodium chloride by injecting 1 mL acetone as disperser solvent containing 15 μL tetrachloroethylene as extraction solvent. The proposed DLLME method was followed by HPLC-DAD for determination of PCP. It has good linearity (0.994) with wide linear dynamic range (0.1–1000 μg L⁻¹) and low detection limit (0.03 μg L⁻¹), which makes it suitable for determination of PCP in water samples.      

Synthesis of functional magnetic porous SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>/P(St-DVB-MAA) microspheres by a novel suspension polymerization

In this study, a novel and effective suspension polymerization has been employed to prepare functional magnetic porous SrFe₁₂O₁₉/P(St-DVB-MAA) microspheres in the presence of bilayer surfactants (sodium dodecyl benzene sulfonate (SDBS) and oleic acid (OA)) coated on micro-size magnetic SrFe₁₂O₁₉. This was achieved by pre-polymerizing the organic phase, which contained co-monomers, porogens and treated magnetic particles, at 65°C for 0.5 h under ultrasound conditions. Aqueous solutions containing a dispersion agent were then added to effect suspension polymerization. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and magnetic property measurement system (MPMS) were used to characterize the functional magnetic porous microspheres. The results show that the microparticles are well shaped with a uniform size distribution of about 0.5 ∼ 0.7 mm and the surfaces of the microspheres have many micro-pores with an average diameter of 0.533 μm. There are carboxyl groups (−COOH) on the surface of the microspheres to the extent of 0.65 mmol g⁻¹, as determined by conductometric titration. According to the XRD spectra, iron oxide consists mainly of SrFe₁₂O₁₉ which reveals hexahedral structure. The content of magnetic SrFe₁₂O₁₉ reaches 17.81% (by mass), and the microspheres have good heat resistance. The magnetic porous microspheres are ferromagnetic with high residual magnetization and coercivity, 21.59 emu g⁻¹ and 4.13 kOe, respectively. The saturation magnetisation is around 42.85 emu g⁻¹.      

Hydrogen sorption characteristics of magnesium-based composites with addition of Mg<Subscript>2</Subscript>Ni<Subscript>0.7</Subscript>Co<Subscript>0.3</Subscript> and graphite

Magnesium-based composites of 75 wt% Mg — (10, 15, 20) wt% Mg2Ni0.7Co0.3 — (15, 10, 5) wt% C mechanically activated for 30 min under argon in a planetary mill, were obtained. Their absorption-desorption characteristics were investigated under a pressure P = 1 MPa and temperatures of 623, 573, 473, 423 and 373 K. Desorption was carried out at 623 K and 573 K and a pressure of 0.15 MPa. All the three composites showed improved hydriding kinetics as compared to pure magnesium. However, the desorption temperature was somewhat higher than needed for practical application.      

Properties of ibuprofen ion-selective electrodes based on the ion pair complex of tetraoctylammonium cation

Ibuprofen membrane electrodes based on different plasticizers: diisobutyl phthalate (DIBP), o-nitrophenyloctyl ether (o-NPOE), dioctyl sebacate (DOS) and tetraoctylammonium 2-(4-isobutylphenyl)propionate were prepared. All electrodes show: a near Nernstian slope of characteristic (58.3–60.9 mV decade⁻¹) in the measurement range (10⁻⁴–10⁻¹ mol L⁻¹), limit of detection (5.0×10⁻⁵ mol L⁻¹), really long lifetime (12 months), dependence of the electrode potential on pH (5.5–9.0), reproducibility of potential (0.6–1.2 mV) and selectivity coefficients in relation to some organic and inorganic anions. The electrodes were applied for the determination of ibuprofen in tablets by the calibration curve method and the standard addition method.      

Effect of the polymeric coating over Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> particles used for magnetic separation

In this work, the synthesis of magnetite nanoparticles by two variant chemical coprecipitation methods that involve reflux and aging conditions was investigated. The influence of the synthesis conditions on particle size, morphology, magnetic properties and protein adsorption were studied. The synthesized magnetite nanoparticles showed a spherical shape with an average particle size directly influenced by the synthesis technique. Particles of average size 27 nm and 200 nm were obtained. When the coprecipitation method was used without reflux and aging, the smallest particles were obtained. Magnetite nanoparticles obtained from both methods exhibited a superparamagnetic behavior and their saturation magnetization was particle size dependent. Values of 67 and 78 emu g⁻¹ were obtained for the 27 nm and 200 nm magnetite particles, respectively. The nanoparticles were coated with silica, aminosilane, and silica-aminosilane shell. The influence of the coating on protein absorption was studied using Bovine Serum Albumin (BSA) protein.      

Properties of naproxen ion-selective electrodes

Naproxen membrane electrodes based on different plasticizers and the quaternary ammonium salts (QASs) dimethyldidecylammonium bromide, methyltrioctylammonium chloride, or tetraoctylammonium chloride, were prepared. The following basic parameters were investigated for the optimal electrode: measurement range (10⁻⁴ − 10⁻¹ mol L⁻¹), slope of the linear range of the calibration curve (−58.3 mV decade⁻¹), limit of detection (6.0 × 10⁻⁵ mol L⁻¹), lifetime (2.5 months), dependence of the electrode potential on pH (5.5 − 9.0), reproducibility of potential (1.2 mV) and selectivity coefficients in relation to selected organic and inorganic anions. The electrode was utilized for determination of naproxen in tablets by the calibration curve method and the standard addition method.      

Ionic liquid promoted Diels-Alder Reaction between anthrone and maleimides

Ionic liquids (IL) are gaining importance as green solvents. Imidazolium ionic liquid [bmim]⁺[Cl]⁻, an environmentally benign solvent, was found to promote the Diels-Alder reaction between anthrone and maleimides at room temperature with excellent yields. The ionic liquid played a dual role as solvent and catalyst.      

Calorimetric study of melts in the System KF - K<Subscript>2</Subscript>NbF<Subscript>7</Subscript>

The relative enthalpies of melts in the system KF - K₂NbF₇ were measured by drop-calorimetry at the temperatures 1058, 1140 and 1208 K as a function of composition. Heat capacities of melted mixtures and enthalpies of mixing were determined using the experimental data. The molar heat capacity of melts diverges slightly from additivity. The molar enthalpy of mixing of melts shows small negative deviation from ideality which decreases with decreasing temperature. The thermal effect at mixing was assigned predominantly to association reactions producing more complex fluoroniobate anions.      

The crystal structure of Ho<Subscript>4</Subscript>Ni<Subscript>11</Subscript>In<Subscript>20</Subscript>

The polycrystalline Ho₄Ni₁₁In₂₀ was obtained by arc-melting of the elements. The subsequent high temperature procedure was used for single crystal growth. Crystal structure of the compound was investigated by X-ray single crystal method: U₄Ni₁₁Ga₂₀ type, C 2/m, a = 22.4528(17), b = 4.2947(3), c = 16.5587(13) Å, β = 124.591(5)°, R1 = 0.0276, wR2 = 0.0493 for 1989 independent reflections with [I>2σ(I)].The structure is composed of three-dimensional network from Ni and In atoms in which Ho atoms fill distorted pentagonal channels. Open image in new window     

Estimation of platinum in environmental water samples with solid phase extraction technique using inductively coupled plasma mass spectrometry

A solid phase extraction technique for the determination of platinum(IV) at trace levels by inductively coupled plasma mass spectromA solid phase extraction technique for the determination of platinum(IV) at trace levels by inductively coupled plasma mass spectrometry (ICP-MS) was developed. The method was based on retention of platinum in a sample on silica gel modified with aminepropyl groups. The retention of platinum(IV) from the sample solution and the recovery of platinum with 1.0 mol L⁻¹ thiourea solution were quantitative. The relative standard deviation (RSD) was calculated as 5% (n = 7) at the 10 ng L⁻¹ level. The enrichment factor was found to be (50-fold) for 250 mL of water sample. Under optimum conditions, the method detection limit (MDL) was found to be 1 ng L⁻¹ for platinum in water matrices. Recoveries of Pt from spike addition to atmospheric water samples were quantitative (80–95%). The present method was used for the determination of platinum in precipitation, throughfall and runoff water samples.      

Mercury determination and speciation analysis in surface waters

A sorbent L-cysteine grafted silica gel has been evaluated for separation and enrichment of dissolved inorganic i-Hg(II) and methylmercury CH₃Hg(I) from surface waters at sub-μg L⁻¹ concentrations. Chemical parameters for mercury species enrichment and separation have been optimized. Analytical schemes for the determination of Hg species, using selective column solid phase extraction (SPE) with continuous flow chemical vapor generation atomic absorption spectrometry (CF-CVG-AAS) or inductively coupled plasma-mass spectrometry (ICP-MS) were developed. Possibilities for on-site SPE enrichment were demonstrated as well. The limits of quantification were 1.5 and 5 ng L⁻¹ for dissolved i-Hg(II) and CH₃Hg(I) by CF-CVG-AAS and 1 and 2.5 ng L⁻¹ by ICP-MS with relative standard deviations between 7–12% and 7–14%, respectively. The chemically modified SPE sorbent has demonstrated high regeneration ability, chemical and mechanical stability, acceptable capacity and good enrichment factors. Results for total dissolved mercury were in reasonable agreement with those from independent analyses by direct ICP-MS determinations for river waters and for estuarine water certified reference material.      

Controlled synthesis,characterization and thermal properties of Mg<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>

Optimum conditions for synthesizing monoclinic and triclinic Mg₂B₂O₅ compounds by high-temperature solid-state reactions were investigated. Mixtures composed of boric acid and magnesium oxide at MgO:B₂O₃ mole ratios of 1:0.25, 1:0.5 and 1:1.5 were heated for 1 hour at temperatures between 600–1050°C and the formed phases were identified by XRD analysis. Monoclinic Mg₂B₂O₅ was formed by heating at 850°C for 4 hours together with minimum amounts of triclinic Mg₂B₂O₅, while triclinic Mg₂B₂O₅ was formed as a single phase at 1050°C for the same reaction time. The products obtained at optimum conditions were subjected to a series of tests to determine their chemical compositions, particle size distributions, surface area values, IR spectra and TG/DTA patterns.      

Density functional theory study of the photosensitization mechanisms of indigo

The triplet excited state properties and photosensitization mechanisms of indigo were investigated based on density functional theory calculations. The solvent effects on the photosensitization mechanisms of indigo have also been considered. The thermodynamic feasibility of the possible ¹O₂ and O₂·⁻-photogeneration pathways by triplet excited state indigo in different solvents was explored, in order to gain some deeper insights into the photosensitization characters of the dye.      

Determination of submillimolar concentration of ferrate(VI) in alkaline solutions by amperometric titration

A new amperometric titration method was developed for quantitative determination of ferrate(VI) (Fe^VIO₄ ²⁻) in the 7.06×10⁻⁵−5.73×10⁻³ M concentration range. Chromium(III) hydroxide solution was used as the titrant. The diffusion current (Id) had a linear relationship with the concentration of ferrate(VI) and slopes were dependent on the concentration of NaOH. The amperometric titration could detect a lower concentration of ferrate(VI) than could potentiometric and colorimetric titrations. The method was applied successfully to determine concentrations of ferrate(VI), generated electrochemically, in strong alkaline solutions.      

Evaluation of various sample pre-treatment methods for total and inorganic mercury determination in biological certified reference materials by CVAAS technique

Sample preparation methods for non-separation cold vapor atomic absorption spectrometry (CVAAS) sequential inorganic mercury speciation in biological certified reference materials (CRMs) were investigated. The methylmercury concentration was calculated as the difference between total and inorganic mercury. Microwave-assisted decomposition method, and three ultrasonic extraction procedures based on acid leaching with HCl and HCOOH and solubilization with TMAH were employed as sample preparation methods. The replacement of a sample decomposition procedure by extraction prior to analysis by CVAAS, as well as the aspect of speciation analysis is discussed. The limits of detection in the sample were determined as 50 and 10 ng L⁻¹ for inorganic and total mercury, which corresponds to absolute detection limits of 40 and 8 ng g⁻¹ for inorganic and total mercury, respectively. The results were in good agreement with the 95% confidence level t-test of the certified values for total and inorganic mercury in the reference materials investigated. From the analysis of the CRMs, it was evident that the difference between the total and inorganic mercury concentrations agrees with the methylmercury concentration. The relative standard deviation was better than 11% for most of the samples.      

Synthesis of dibromo ketones by the reaction of the environmentally benign H<Subscript>2</Subscript>O<Subscript>2</Subscript>-HBr system with oximes

It was found that oximes undergo deoximation in the presence of the H₂O_2aq-HBr_aq system to form ketones and bromo ketones. This reaction provided the basis for the synthesis of dibromo ketones in yields varying from 40% to 94%. This method is environmentally friendly, sustainable, and easy to perform. The results of this investigation extend the potential of the use of oximes for the protection of carbonyl group, thus offering the ability to perform not only conventional deoximation but also the subsequent bromination of ketones. The reaction is easily scaled up and dibromo ketones can be prepared in gram amounts.      

Electrochemical dissolution of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> in acidic solutions

The cyclic voltammetry method was used to study the regularities of the electrochemical behavior of cobalt cobaltite in an acidic medium. It is shown that cathodic reduction of Co₃O₄ in the studied range of potentials of +1.0 to −0.8 V is a multistage process occurring according to the scheme: