Investigation of pH-responsive properties of polymeric micelles with a core-forming block having pendant cyclic ketal groups

In this study, three kinds of amphiphilic block copolymers, termed MPEG-block-PDMMA, MPEG-block-PCPMA, and MPEG-block-PMPMA, which were composed of one hydrophilic monomethoxy poly(ethylene glycol) (MPEG) block and one hydrophobic polyacrylate block bearing pendant six-member cyclic ketal groups, were synthesized by atom transfer radical polymerization (ATRP). These polymers can disperse in aqueous media to self-assemble into micellar aggregates with a spherical core-shell structure with mean diameter below 300 nm. The stimuli-responsiveness of polymeric micelles from MPEG-block-PDMMA was detected by fluorescence-probe technique at pH 3.5 and 37 °C. The effect of chemical architecture and composition of the polymers on the pH-responsive properties of polymeric micelles was also studied. A combination of pH and temperature to trigger release behavior of these polymeric micelles was discussed by comparing the encapsulated molecule release ability under various pH and temperature conditions and analyzing chemical structural changes of the polymer before and after the triggering.     

Conventional synthesis of amphiphilic block copolymer utilized for polymeric micelle by mechanochemical solid-state polymerization

The first example is presented here of an amiphiphilic block copolymer synthesized by mechanochemical solid-state polymerization and used to form polymeric micelles. A model amphiphilic block copolymer was synthesized first, possessing galactose as a hydrophilic side chain and theophylline as a hydrophobic side chain, by mechanochemical solid-state polymerization. The resulting copolymer had a narrow molecular weight distribution. Polymeric micelle formation was subsequently carried out with the copolymer by a dialysis method. To gain insight into the physicochemical properties of the polymeric micelle, dynamic light scattering (DLS) measurements were performed. A narrow distribution of diameters was observed in the polymeric micelle solution, and these micelles were disrupted by the addition of sodium dodecyl sulfate (SDS). It was also confirmed by DLS measurements that the polymeric micelles were spherical. These results suggested that the block copolymer synthesized by mechanochemical solid-state polymerization was as suitable for the preparation of polymeric micelles as materials obtained by living polymerization.     

The effect of block copolymer structure on the internalization of polymeric micelles by human breast cancer cells

The objective of this study was to assess the effect of hydrophilic/hydrophobic block chain lengths on the internalization of poly(ethylene oxide)-block-poly(varepsilon-caprolactone) (PEO-b-PCL) micelles by cancer cells. PEO-b-PCL block copolymers with varied PEO and PCL chain lengths were synthesized, assembled to polymeric micelles and loaded with a hydrophobic fluorescent probe (DiI) through a co-solvent evaporation method of physical encapsulation. The slow release of the fluorescent probe from the micellar structure was evidenced following DiI transfer to lipid vesicles. The extent of micellar uptake by cancer cells was investigated through their incubation with MCF-7 cells followed by measurement of the fluorescent emission intensity of DiI (lambda=550 nm) in separated lysed cells. Cellular internalization of polymeric micelles was confirmed by laser scanning microscopy. The mechanism of micellar uptake was investigated by pretreatment of MCF-7 cells with chlorpromazine and cytochalasin B. Encapsulation of DiI in PEO-b-PCL micelles lowered the extent and rate of hydrophobic probe internalization by cancer cells. For polymeric micelles with 5000 gmol(-1) of PCL and varied PEO molecular weights of 2000, 5000 and 13,000 gmol(-1), maximum uptake was observed at a PEO molecular weight of 5000 gmol(-1). For polymeric micelles with 5000 gmol(-1) of PEO and varied PCL molecular weights of 5000, 13,000 and 24,000 gmol(-1), maximum uptake was observed at 13,000 gmol(-1) of PCL. Chlorpromazine reduced the cellular uptake of PEO-b-PCL micelles independent from the block copolymer structure, pointing to the involvement of clathrin mediated endocytosis mechanisms in the uptake of polymeric micelles by cancer cells. Inhibition of cellular uptake of PEO-b-PCL micelles by cytochalasin B, on the other hand, was found to be dependent on the chemical structure of the core/shell forming blocks.     

A pH dependent thermo-sensitive copolymer drug carrier incorporating 4-amino-2,2,6,6-tetramethylpiperidin-1-oxyl (4-NH2-TEMPO) residues for electron spin resonance (ESR) labeling

The fabrication of a new amphiphilic block copolymer composed of a poly DL-lactic acid (PLA) hydrophobic backbone and pH dependent thermo-sensitive poly (N-isopropyl) methacrylamide-co-N-isopropylmaleamic acid-co-10-undecenoic acid (PNIPAAm-co-NIPMMA-co-UA) entities as hydrophilic domains as well as carrying 2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO) residues for electron spin resonance (ESR) labeling is reported. The lower critical solution temperature (LCST) of the copolymer was determined by optical absorbance measurements. The LCST was pH dependent and varied in a narrow practical range, 35.4 °C at pH 5.0, 37.5 °C at pH 6.5 and 39.4 °C at pH 7.4, which was below, near and above nominal physiological temperature respectively. The assembly of the copolymer into micelles in aqueous solution at temperatures below the LCST was confirmed by FT-IR, (1)H NMR and fluorescence spectroscopy. It is demonstrated that the anticancer drug, 5-fluorouracil (5-FU) can be loaded effectively within the polymeric micelles and released in response to environmental stimuli- namely, pH and temperature.     

Preparation of electrospun luminescent polyimide/europium nanofibers by simultaneous in situ sol-gel and imidization processes

Comicellization of a star block copolymer poly(ε-caprolactone)-block-poly(diethylamino)ethyl methacrylate (S(PCL-b-PDEAEMA)) and a linear block copolymer methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) (mPEG-b-PCL) was developed to enhance the stability and lower the cytotoxicity of the micelles. The two copolymers self-assembled into the mixed micelles with a common PCL core surrounded by a mixed PDEAEMA/mPEG shell in aqueous solution. This core-shell structure was transformed to the core-shell-corona structure at high pH due to the collapse of the PDEAEMA segment. The properties of the polymeric micelles were greatly dependent on the weight ratio of the two copolymers and the external pH. As increasing the mPEG-b-PCL content, the size and the zeta potential of the mixed micelles were lowered while the pH-dependent stability and the biocompatibility were improved. Moreover, an increase in pH accelerated the release of indomethacin (IND) from the mixed micelles in vitro. These results augured that the mixed micelles could be applied as a stable pH-sensitive release system.     

Synthesis of self-assemble pH-responsive cyclodextrin block copolymer for sustained anticancer drug delivery

Well-defined p H-responsive poly(ε-caprolactone)-graft-β-cyclodextrin-graft-poly(2-(dimethylamino)ethylmethacrylate)-co-poly(ethylene glycol) methacrylate amphiphilic copolymers(PCL-g-β-CD-g-P(DMAEMA-co-PEGMA)) were synthesized using a combination of atom transfer radical polymerization(ATRP),ring opening polymerization(ROP) and "click" chemistry.Successful synthesis of polymers was confirmed by Fourier transform infrared spectroscopy(FTIR),proton nuclear magnetic resonance(1H-NMR),and gel permeation chromatography(GPC).Then,the polymers could selfassemble into micelles in aqueous solution,which was demonstrated by dynamic light scattering(DLS) and transmission electron microscopy(TEM).The p H-responsive self-assembly behavior of these copolymers in water was investigated at different p H values of 7.4 and 5.0 for controlled doxorubicin(DOX) release,and these results revealed that the release rate of DOX could be effectively controlled by altering the p H,and the release of drug loading efficiency(DLE) was up to 88%(W/W).CCK-8 assays showed that the copolymers had low toxicity and possessed good biodegradability and biocompatibility,whereas the DOX-loaded micelles remained with high cytotoxicity for He La cells.Moreover,confocal laser scanning microscopy(CLSM) images revealed that polymeric micelles could actively target the tumor site and the efficient intracellular DOX release from polymeric micelles toward the tumor cells further confirmed the anti-tumor effect.The DOX-loaded micelles could easily enter the cells and produce the desired pharmacological action and minimize the side effect of free DOX.These results successfully indicated that p H-responsive polymeric micelles could be potential hydrophobic drug delivery carriers for cancer targeting therapy with sustained release.     

Tamoxifen-loaded polymeric micelles: preparation, physico-chemical characterization and in vitro evaluation studies

Several samples of polymeric micelles, formed by amphiphilic derivatives of PHEA, obtained by grafting into polymeric backbone of PEGs and/or hexadecylamine groups (PHEA-PEG-C(16) and PHEA-C(16)) and containing different amount of Tamoxifen, were prepared. All Tamoxifen-loaded polymeric micelles showed to increase drug water solubility. TEM studies provided evidence of the formation of supramolecular core/shell architectures containing drug, in the nanoscopic range and with spherical shape. Samples with different amount of encapsulated Tamoxifen were subjected to in vitro cytotoxic studies in order to evaluate the effect of Tamoxifen micellization on cell growth inhibition. All samples of Tamoxifen-loaded polymeric micelles showed a significantly higher antiproliferative activity in comparison with free drug, probably attributable to fluidification of cellular membranes, caused by amphiphilic copolymers, that allows a higher penetration of the drug into tumoral cells. To gain preliminary information about the potential use of prepared micelles as Tamoxifen drug delivery systems, studies evaluating drug release ability of micelle systems in media mimicking biological fluids (buffer solutions at pH 7.4 and 5.5) and in human plasma were carried out. These studies, performed evaluating the amount of Tamoxifen that remains in solution as a function of time, showed that at pH 7.4, as well as in plasma, PHEA-C(16) polymeric micelles were able to release lower drug amounts than PHEA-PEG(5000)-C(16) ones, while at pH 5.5, the behavior difference between two kind of micelles was less pronounced.     

Self‐assembly of thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) micelles for drug delivery

Self‐assembled thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) (PAA‐b‐PNIPAM) micelles for entrapment and release of doxorubicin (DOX) was described. Block copolymer PAA‐b‐PNIPAM associated into core‐shell micelles in aqueous solution with collapsed PNIPAM block or protonated PAA block as the core on changing temperature or pH. Complexation of DOX with PAA‐b‐PNIPAM triggered by the electrostatic interaction and release of DOX from the complexes due to the changing of pH or temperature were studied. Complex micelles incorporated with DOX exhibited pH‐responsive and thermoresponsive drug release profile. The release of DOX from micelles was suppressed at pH 7.2 and accelerated at pH 4.0 due to the protonation of carboxyl groups. Furthermore, the cumulative release of DOX from complex micelles was enhanced around LCST ascribed to the structure deformation of the micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5028–5035, 2008     

Specific interactions improve the loading capacity of block copolymer micelles in aqueous media

Block copolymer micelles find application in many fields as nanocarriers, especially in drug delivery. We report herein that specific interactions between hydrophobic guest molecules and core-forming segments can significantly improve the loading capacity of polymeric micelles. High loading capacities (>100% weight/weight of polymer (w/wp)) were systematically observed for the encapsulation of probes containing weak carboxylic acid groups by micellar nanoparticles having poly[2-(dialkylamino)ethyl methacrylate] cores (i.e., particles whose cargo space exhibits antagonist weak base functions), as demonstrated by the incorporation of indomethacin (IND), ibuprofen (IBPF), and trans-3,5-bis(trifluoromethyl)cinnamic acid (F-CIN) into either poly(ethylene oxide)-b-poly[2-(diisopropylamino)ethyl methacrylate] (PEO-b-PDPA) or poly(glycerol monomethacrylate)-b-PDPA (PG2MA-b-PDPA) micelles. The esterification of IND yielding to a nonionizable IND ethyl ester derivative (IND-Et) caused an abrupt decrease in the micellar loading capacity down to 10-15% w/wp. Similar results were also obtained when IND was combined with nonionizable block copolymers such as PEO-b-polycaprolactone (PEO-b-PCL) and PEO-b-poly(glycidyl methacrylate) (PEO-b-PGMA). The existence of acid-base interactions between the solubilizate and the weak polybase block forming the micelle core was confirmed by 1H NMR measurements. However, the incorporation of high numbers of hydrophobic guest molecules inside polymeric micelles can provoke not only an increase in the hydrodynamic size (2RH) of the objects but also a substantial change in the morphology (transition from spheres to cylinders). The application of the Higuchi model showed that the probe release followed a diffusion-controlled mechanism, and diffusion coefficients (D) on the order of 10-18-10-17 cm2/s were determined for IND release from 1.0 mg/mL PEO113-b-PDPA50 + 100% w/wp IND. Probe release from micelles with weak polybase-based cores can also be triggered by changes in the solution pH.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Synthesis and characterization of biodegradable pH and reduction dual‐sensitive polymeric micelles for doxorubicin delivery

Novel pH and reduction dual‐sensitive biodegradable polymeric micelles for efficient intracellular delivery of anticancer drugs were prepared based on a block copolymer of methyloxy‐poly(ethylene glycol)‐b‐poly[(benzyl‐l ‐aspartate)‐co‐(N‐(3‐aminopropyl) imidazole‐l ‐aspartamide)] [mPEG‐SS‐P(BLA‐co‐APILA), MPBA] synthesized by a combination of ring‐opening polymerization and side‐chain reaction. The pH/reduction‐responsive behavior of MPBA was observed by both dynamic light scattering and UV–vis experiments. The polymeric micelles and DOX‐loaded micelles could be prepared simply by adjusting the pH of the polymer solution without the use of any organic solvents. The drug release study indicated that the DOX‐loaded micelles showed retarded drug release in phosphate‐buffered saline at pH 7.4 and a rapid release after exposure to weakly acidic or reductive environment. The empty micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. Confocal microscopy observation demonstrated that the DOX‐loaded MPBA micelles can be quickly internalized into the cells, and effectively deliver the drugs into nuclei. Thus, the pH and reduction dual‐responsive MPBA polymeric micelles are an attractive platform to achieve the fast intracellular release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1771–1780     

pH and ionic strength responsive polyelectrolyte block copolymer micelles prepared by ring opening metathesis polymerization

Well‐defined amphiphilic block copolymers were prepared by ring opening metathesis polymerization and their stimuli responsive behavior of formed micelles in aqueous solution was investigated. The hydrophobic core of the micelles consists of either a poly[5,6‐bis(ethoxymethyl)bicyclo[2.2.1]hept‐2‐ene]‐block with a glass transition T_g at room temperature or a poly[endo,exo[2.2.1]bicyclohept‐5‐ene‐2,3‐diylbis (phenylmethanone)] with a T_g of 143 °C. For the polyelectrolyte shell, the precursor block poly[endo,exo[2.2.1]bicyclohept‐5‐ene‐2,3‐dicarboxyclic tert‐butylester] was transformed into the free acidic block by cleavage of the tert‐butyl groups using trifluoroacetic acid. Micellar solutions were prepared by dialysis, dissolving the copolymers in dimethyl sulfoxide which was subsequently replaced by water. All polymers form micelles with radii between 10 and 20 nm at a pH‐value below 5, where the carboxylic acid groups are in the protonated state. The block copolymer micelles show a strong increase of the hydrodynamic radius with increasing pH‐value, due to the repulsion among the formed carboxylate anions resulting in a stretching of the polymer chains. In this state, the micelles exhibit responsive behavior to ionic strength where a contraction of the micelles is observed as the carboxylate charges are balanced by sodium ions, whereas no changes of the hydrodynamic radius on addition of salt are observed at low pH. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1178–1191, 2009     

Near-infrared light-triggered dissociation of block copolymer micelles using upconverting nanoparticles

We demonstrate a novel strategy enabling the use of a continuous-wave diode near-infrared (NIR) laser to disrupt block copolymer (BCP) micelles and trigger the release of their "payloads". By encapsulating NaYF(4):TmYb upconverting nanoparticles (UCNPs) inside micelles of poly(ethylene oxide)-block-poly(4,5-dimethoxy-2-nitrobenzyl methacrylate) and exposing the micellar solution to 980 nm light, photons in the UV region are emitted by the UCNPs, which in turn are absorbed by o-nitrobenzyl groups on the micelle core-forming block, activating the photocleavage reaction and leading to the dissociation of BCP micelles and release of co-loaded hydrophobic species. Our strategy of using UCNPs as an internal UV or visible light source upon NIR light excitation represents a general and efficient method to circumvent the need for UV or visible light excitation that is a common drawback for light-responsive polymeric systems developed for potential biomedical applications.     

The research on multi‐responsive azobenzene block copolymer and its self‐assembly behavior

The azobenzene‐based amphiphilic copolymers have drawn significant attention as a kind of multi‐responsive smart materials. The demand on deeper investigation of how the azobenzene group influences the micelles formation and light‐responsive behavior on molecular level is very urgent. In this article, multi‐responsive block copolymers, poly (acrylic acid)‐block‐poly[4'‐[[(2‐Methacryloyloxy)ethyl]ethylainino]azobenzene‐co‐poly (ethylene glycol) methyl ether methacrylate] (PAA‐b‐P (AzoMA‐co‐PEGMA)), with pH‐, light‐ and reduction‐responsiveness were synthesized by the monomers of AzoMA, PEGMA and acrylic acid via reversible addition‐fragmentation chain transfer polymerization (RAFT). The amphiphilic block copolymer presented aggregation‐induced emission effect, and it was pH, light, and reduction responsive. The results showed that the micelle size decreased with the decreasing of pH within a certain range. However, the particle size of micelles increased significantly when the pH was 4. Once adding reduction agent, the micelles were disassembly. Fluorescent molecule of Nile red was selected as a hydrophobic guest molecule to study the properties of encapsulating and releasing abilities of block copolymer micelles for guest molecules. The results showed that the loading capacity of three kinds of copolymer micelles was closely related to the aggregates formed by the hydrophobic block, mainly azobenzene block. Besides, the block copolymer micelles could release a certain amount of Nile red under the irradiation of UV light, the reduction with Na₂S₂O₄ as reductant, and the exposure to alkaline environment. The mechanism of how the different status of azobenzene group influenced the self‐assembly and multi‐responsive behavior was explored on molecular level.     

聚乙二醇-聚谷氨酸-聚丙氨酸三嵌段共聚物的合成及其胶束的pH-响应性药物控制释放

通过大分子引发剂ω-胺基-α-甲氧基聚乙二醇引发N-羧基-α-氨基环内酸酐开环聚合和酸性水解制备了一种具有pH-响应性的三嵌段共聚物聚乙二醇-聚谷氨酸-聚丙氨酸(mPEG-PLGA-PLAA).通过核磁共振、ζ-电势、动态光散射、电子显微镜等手段表征了此类三嵌段共聚物的自组装过程及所形成胶束的pH-响应性.使用圆二色谱和红外光谱,分析了胶束结构随环境pH值转变过程中聚氨基酸链段二级结构的变化.以阿霉素作为模型药物,研究了三嵌段共聚物的载药能力和在不同pH条件下的药物释放能力.在碱性条件下,PLGA链段去质子化,链段从疏水性变为亲水性,胶束中间层由于水合作用变得松散,药物释放速率增加;在酸性条件下,PLGA链段质子化,不带电荷,与阿霉素药物分子间的静电相互作用消失.同时,PLGA链段α-螺旋含量增加,形成由链内氢键维持的刚性棒状结构,将链段周围包埋的药物分子"挤出",加速了药物的释放.     

Synthesis and aggregation behavior of four-arm star amphiphilic block copolymers in water

We report the first synthesis of amphiphilic four-arm star diblock copolymers consisting of styrene (STY) and acrylic acid (AA) made using reversible addition-fragmentation chain transfer (RAFT; Z group approach with no star-star coupling). The polymerization proceeded in an ideal "living" manner. The size of the poly(AA(132)-STY(m)4 stars in DMF were small and close to 7 nm, suggesting no star aggregation. Slow addition of water (pH = 6.8) to this mixture resulted in aggregates of 15 stars per micelle with core-shell morphology. Calculations showed that the polyAA blocks were slightly extended with a shell thickness of 15 nm. Treatment of these micelles with piperidine to cleave the block arms from the core resulted in little or no change on micelle size or morphology, but the polyAA shell thickness was close to 29 nm (33 nm is the maximum at full extension) suggesting a release of entropy when the arms are detached from the core molecule. In this work we showed through the use of star amphiphilic polymers that the micelle size, aggregation number, and morphology could be controlled.     

Co-delivery of docetaxel and doxorubicin using biodegradable PEG-PLA micelles for treatment of breast cancer with synergistic anti-tumour effects

Poly(ethylene glycol)-poly(lactic acid) copolymer, prepared by ring opening polymerization, was used as a single platform to co-deliver both hydrophilic doxorubicin and hydrophobic docetaxel (DTX) in a simulated physiological environment. The average size of the negatively charged drug loaded polymeric micelles were found to be 293 nm. The drug loading (%) and encapsulation efficiency (%) were calculated to be 1.21 and 59.0, respectively. The in vitro cytotoxicity test using MCF7 breast cancer cells was conducted using 1 × 10⁴ cells in 10% FBS and 1% antibiotic, and the absorbance of formazan was evaluated at 570 nm. Cell growth inhibition by MTT assay showed viability of 33% of the MCF7 cells after treatment with drug-loaded micelles for 48 h. Controlled release of drugs from the polymeric micelles indicated a burst release effect initially; whereas, 98% of drug could be released at pH 7.4 within a time period of 96 h. Time period for drug release shorten to 48 h only in simulated mild acidic pH (5.4) condition. The in vitro drug release study from micelles indicated synergistic cytotoxicity effect in human metastatic breast cancer MCF7 cell.     

Polymeric Micelles Loading Proteins through Concurrent Ion Complexation and pH‐Cleavable Covalent Bonding for In Vivo Delivery

Protein drugs have great potential as targeted therapies, yet their application suffers from several drawbacks, such as instability, short half‐life, and adverse immune responses. Thus, protein delivery approaches based on stimuli‐responsive nanocarriers can provide effective strategies for selectively enhancing the availability and activation of proteins in targeted tissues. Herein, polymeric micelles with the ability of encapsulating proteins are developed via concurrent ion complexation and pH‐cleavable covalent bonding between proteins and block copolymers directed to pH‐triggered release of the protein payload. Carboxydimethylmaleic anhydride (CDM) is selected as the pH‐sensitive moiety, since the CDM? amide bond is stable at physiological pH (pH 7.4), while it cleaves at pH 6.5, that is, the pathophysiological pH of tumors and inflammatory tissues. By using poly(ethylene glycol)‐poly(l ‐lysine) block copolymers having 45% CDM addition, different proteins with various sizes and isoelectric points are loaded successfully. By using myoglobin‐loaded micelles (myo/m) as a model, the stability of the micelles in physiological conditions and the dissociation and release of functional myoglobin at pH 6.5 are successfully confirmed. Moreover, myo/m shows extended half‐life in blood compared to free myoglobin and micelles assembled solely by polyion complex, indicating the potential of this system for in vivo delivery of proteins.     

Reversible pH-triggered encapsulation and release of pyrene by adsorbed block copolymer micelles

The well-established ability of copolymer micelles to encapsulate and release hydrophobic molecules has been investigated following their adsorption onto silica particles. Here, a pH-responsive copolymer, poly(2-(dimethylamino)ethyl methacrylate)- b-poly(2-(diethylamino)ethyl methacrylate) (PDMA(106)- b-PDEA(25)), has been used to study the formation and dissociation of adsorbed micelles through pH variation. This copolymer behaves as free unimers in aqueous solutions below pH 8 and forms micelles 29 nm in hydrodynamic diameter above this pH. Encapsulation and release of a model hydrophobic compound (pyrene) by in situ adjustment of the solution pH has been compared for both free and adsorbed micelles using fluorescence spectrophotometry, epifluorescence microscopy, and zeta potential measurements. At basic pH values, pyrene is solubilized within the cores of micelles adsorbed on silica particles: addition of acid leads to micelle dissociation and release of the pyrene into the bulk aqueous solution. Micelle adsorption does not appear to hinder the extent of pyrene uptake/release. Moreover, this pH-responsive behavior is both reversible and reproducible over multiple pH cycles.     

Complexes of cationic block copolymer micelles with DNA: histone/DNA complex mimetics

The formation of complexes between cationic polymeric micelles of PS-b-PQ2VP amphiphilic block copolymers and DNA molecules in aqueous solutions is investigated at pH = 7. The physicochemical characteristics of the "polyplexes" at different DNA/polymer ratios were characterized in terms of mass, size and charge using static, dynamic and electrophoretic light scattering and AFM. The complexes are spherical and assume their maximum size and mass around the charge stoichiometric ratio. After addition of increased amounts of salt in the solutions, partial dissociation of the systems was observed. The present systems can be considered as mimetics of histone/DNA complexes formed under physiological conditions in living cells.